Help... Step by step upgrading Radio only for O2 XDA II device - MDA II, XDA II, 2060 ROM Development

Hello all,
Pls regarding support me on this case,
Current ROM (2003se) of my device as below:
Rom Version:: 2.06.00WWE
Rom date: 06/14/04
Radio Version: 1.10.00
Protocol Version: 1337.18
ExtROM Version: 2.06-PDAMobiz
6 months ago, my device meet a problem:
- When the capacity of Battery (1100mAh) is about 20-30%, immediately it turn off.
- The radio is instable & always flow down during calling --> voice not clearly from two site.
Nearby, i have a new battery (2400mAh) which replaced, current status:
- Main battery can remain to 2-3% of empty capacity and then, the device turn off. It seem the backup battery is malfunction.
- Still the radio is instable & always flow down during calling --> voice not clearly from two site.
Do you agree my solution as below:
- Replace the backup battery which is integrated in device
- Only Upgrade the Radio --> Kindly help me the detail manual to do it. However, i know the step by step guiding to upgrade the ROM for Hymalaya type which have posted a lots in this forum.
Thank you very much for your understanding.
Regards;
changngoc;

just flash as u manually do it, but replace the nk.nbf file the radio file.. so lets suppose its in a folder with the RUU and the Radio Upgrade only, it will just upgrade the radio and leave ur ROM untouched

Related

HELP! Anyone lose phone ring after SE update? HELP!

Just upgraded per DCS's instructions and am most pleased with the SE upgrade although my radio shows Radio verison 1.14.00 so I am hopefully assuming therein lies the problem.
I get no phone ring I've tried all the ring options from vibrate all the way up to ring to vibrate then ring, etc. but everytime I try to call my cell phone it never rings on the phone just eventually goes to voice mail. Anyone have any ideas or how to upgrade JUST the radio version to the current 1.18?
My PDA information if this helps is:
TMobile MDA II
ROM verison 2.06.00WWE
ROM date: 06/14/04
Radio version: 1.14.00
Protocol version: 1337.24
ExtROM version: (this has always been blank even prior to upgrading)
Thanks in advance for some input.
Don't be serious.
Firstly,you need to make sure that sound problem occur with ringtone only
What about system sound ? if it's fine, problem must be in ringtone only.
If it's ringtone problem, you need to check your Ext ROM about MIDI.cab file(use extended ROM viewer or extended ROM unlocker)
If it doesn't have MIDI.cab, try to use my attach file.
Secondly, if problem not occur only ringtone, try to flash ROM again.
If you still need radio ROM 1.18, you can use search to find radio1.18 posted by mamaich.
or just simply you may try flash with ROM 2.06 from http://forum.xda-developers.com/viewtopic.php?t=13588&start=0 (look at mamaich comment, he provides ROM 2.06 file)
Hope you can fix this problem.
Nope not the ring tone. System sound works fine and can test ring tones in the Phone utility. All sounds work as expected with the exception of course of the phone ringing when a call is received.
What's odd is I can hear in my BT Jabra 250 headset the ringing to answer it but the phone never rings or vibrates. I also get a notification that I missed a call but once again never a ring or vibrate.
Tried reflashing the ROM via Sin's setup twice already but to no avail. My unit now shows but the problem is still there.
ROM version: 2.06.00WWE
ROM date: 06/14/04
Radio version: 1.18.00
Protocol version: 1337.38
ExtROM version: still is blank
Are you using Wisbar Advance? There is a problem with this preventing the ring tone in SE devices.
I've also found that mine (2.06) doesn't ring while in landscape.
As a matter of fact I just upgraded to Wisbar Advance 2 (paid for it to boot) and I've noticed that if I don't exit Wisbar then I cannot rotate the screen without corrupting the screen.
I just reflashed and ring tones are working fine. I will continue installing my apps and test a call after each installation to determine the problem. But since all my apps have worked fine with the exception of WisBar then I think you hit the nail on the head.
I will install that shortly and see what results I get and report them here.
Thanks
Wisbar Advance 2 kills phone & corrupts screen in WM03SE
Well after two days of reflashing my PDA and trying to narrow down the problem the good people at XDA.Developers forum suggested the problem could in fact be WisBar Advance.
How right you are. The solution after two days and half a dozen reflashes was to simply remove WisBar Advance v2 and all is well again. This after purchasing what looked to be a fine upgrade to an already outstanding program.
Problems to be aware of with Windows Mobile 2003 SE Phone Edition using WisBar Advance v2 are the following:
1/ Loss of phone ringing
2/ Corrupt screen when rotating
If those two issues can be resolved then this will again reside within my PPC. Now to work on getting a refund since this has been a nightmare that until my refund is issued is still ongoing.

Qtec 2020 dead after update

Hi everyone,
I've tried to upgrade my PDA from:
ROM version - 2.06.00WWE
Radio - 1.14.00
ExtROM - 2.06.100a
to
ROM version - 2.06.00WWE
Radio - 1.18.00
ExtROM - 2.06.100a
but it went wrong during the erasing proces. The only thing on my grey screen is USB and v1.02. I've tried the setup again but it keeps by zero percent during the erasing proces, followed by error 112. Also I've tried a hard reset but nothings hapens. After the hard reset the screen shows USB and v1.02.
Can someone please help me out.
Many thanks
powerkite
problem solved
I had ot give the device a hard reset (you know styles with on/off button) in combination with the button between both phone buttons. After this run the upgrade again. It will not show information of the device version, only the version you want to upgrade to.
good luck
powerkite
Hello Powerkite!
Hod did you manage to upgrade a Qtek2020 to rom version 2.06. I am lookingall over to do so, but I can't find a good (clean) solution.I am not a programmer or a computer freak therefor I am looking for an easy solution.
thanks
Eddy
Try the following link: http://forum.xda-developers.com/viewtopic.php?t=13588&postdays=0&postorder=asc&start=0

XDA2i - Softwareupdate - ERROR-MEssages - need new IMAGE !!!

Hi guys
First of all thanks for everybody who is just reading this ...
I bought a XDA2i from Ebay (Original O2 - UK) - unlocked it via IMEI-Check - everything works as good as possible - i'am happy with my device.
ROM Version: 1.10.00 WWE
Rom date: 12/24/04
Radio Version: 1.00.00
Protocol Version: 1337.39
Extended ROM: -- (nothing mentioned)
Bootloaderversion: 1.01
But the device is taesing me when i try to update the software. I really tried now everything human possible, i have no clue how i can do the upgrade.
The offizial softare ( picked from the O2 webpage) is goin very well, its th only one i can upgrade - the other Roms doesn't work. I got Error Messages concerning countrie, ROM doesn't fit to my device, connection, bla bla ..
With the patched himalaya setup file its possible to start the ERASING of the ROM - but in the RUU Logfile i can see that the process ist stopped after 3 trials, then i have to make a softreset..
Okay i studied now this forum and a german one POCKET PC Phone , since around 2 weeks - but i found no solution. I tried to change the ROMS Operator / Language by th eROM Editor, as well i tried the HEX Editor solution nothing - my device is laughing at me - and i really get crazy..
Before starting my trials i made a ROM Image on a SD ( everything works ver well ) also i read it from SD and saved it to my pc hardrive by using the programm NTRW.
So in my opinion there must be the opportunity to get from somebody a working IMAGE !!! File ( not ROM , no nbf or the files which are already on the FTP SErver) and write it with NTRW to the SD Card - bring the device in bootloader Modus an install the ROM ??
!!!
Does anybody has a working IMAGE-FILE !! for me ( XDA2i O2 WWE) an is able to save that on the FTP.
I really would appreciate your help, but for me it seems to be the last chance to get a newer software on the device.
thanks a lot in advance
Forgive me if I've got this wrong, but which ROM are you trying to apply to the XDA2i? I've got the same phone and there isn't any official updated ROM to put on it. There is a weird kinda one sitting on the FTP but I suspect it's not complete as there isn't a Windows installer...only what appears to be files to be run from the phone itself.
None of the other ROMs on this board will work on the 2i as they're for other phones.
Cheers
Ant
I wonder why there is no ExtROM in your Andes
Ext. Rom is not installed, why during the new software installation i made a soft reset just before the Ext. Rom was going to install itself on the device.
I had a close look in the forum, i studied it - and there were a lot of guys which wrote they have an XDA2i !! with ROM of TMOBILE or IMATE or whatever - not an original from O2..
And i'am looking for one of this guys, who has an XDA2i and a newer ROM - and this guy should provide me a IMAGE file to be able to write it on a SD card ant ugrade this f* PDA
what happens when you try to re-install the latest rom?

PLEASE HELP ME ON XDAIIS

HI GUYS,
I AM IN A VERY SERIOUS TROUBLE SO KINDLY HELP ME.
I HAVE AN XDAIIS FROM LAST JANUARY AND I DO NOT KNOW WHAT IS HAPPENING SOMETIMES THE VIBRATOR DOES NOT WORK, IT HANGS A LOT.EVEN IF THE BATTERY IS 70% LEFT THE PDA STARTS TO HANG AND I CANNOT RECIEVE ANY CALLS OR ANYTHING ELSE.
I HAVE PUT A MEMORY CARD OF 512 MB OF MERCURY AND IF I TRY TO LOAD SOME EXTRA FILES OF MORE THEN 10-12 MB THEN AS WELL MY PHONE HANGS. I TRIED SHOWING THE CELL IN INDIA AT KOLKATA IN A SERVICE CENTER CALL ACCEL AND THEY SAID THAT THE SOFTWARE WAS CORRUPTED AND THEY HAD PUT A NEW SOFTWARE AND IT IS OK NOW BUT IT DID NOT WORKED.
PLEASE KINDLY HELP ME WHAT HAS TO BE DONE.
MY DEVICE INFORMATIONS ARE AS FOLLOWS:
ROM VERSION: 1.40.00WWE
ROM DATE: 03/10/05
RADIO VERSION: 1.12.00
PROTOCOL VERSION: 1337.42
EXTROM VERSION: 1.40.923WWE[/b]
you are likely to get more replays by ppl who own the same device if you post it in the forum for your device it's called Blue angel
.... and don't SHOUT :idea:

[Q] HD2 Radio troubles

Hi, I have just purchased a second hand HD2 (Telstra Aust. stock) however it already had a custom rom on it (which i didnt like). I have been trying to install a new energy rom i can get the rom on and work except i cannot make any calls, I know the problem is the radio i have tried to install a new radio and when i go through the install stage it gets stuck on 0% and nothing happens. Im not sure which radio to use. The rom i want is: Energy.Leo.29007.sense2.5.Dec.7
My HD2 software details are:
OS version: 5.2.21869 (21869.5.0.82)
Manila version:2.5.19211619.0
Rom version:1.48.405.2 (71294)WWE
Radio:2.05.51.05_2
Protocol version: 15.28.50.07U
Any help would be greatly appreciated.
Switch phone off. Then while holding volume down button in, switch on the phone (keep holding vol down). The phone will boot into a multi-coloured screen. What spl version is displayed in the text showing?
You are correct about it being a radio problem. You have a .51 radio instead of the required .50 as explained in the Energy thread.
spl
im running 2.08.0000
Just download HSPL3 and replace your SPL2.08 to HSPL2.08
Then download EnergyROM and flash.
Make sure your RADIO is 2.08.50 and above. I prefer the 2.15.50 RADIO, but that is just me.
Thanks I will give that a go.
thnx man got it working just fine

Categories

Resources