fast ur net speed - XPERIA X8 Android Development

speed ur net speed by this method Add these lines to your ROM's build.prop. Which can be found under '/system/build.prop'.
ro.ril.hep=1
ro.ril.hsxpa=2
ro.ril.enable.dtm=1
ro.ril.gprsclass=12
ro.ril.hsdpa.category=8
ro.ril.enable.a53=1
ro.ril.hsupa.category=5
ro.ril.enable.3g.prefix=1
after that u update attach file from flash recovery then reboot ur phone

3 of that lines already in minicm build.prop
update zip will make it double on build.prop,
did this make a gprs fast too? cos my 3g always down. thanx

yes it work like magic for this u all 8 line should be in to your ROM's build.prop. Which can be found under '/system/build.prop reboot phone check ur net speed from speedtest.apk which u install from market

ur net speed work like this Explanation
ro.ril.hsxpa = indicates hsxpa support of target network :
Code:
ro.ril.hsxpa=0 - UMTS r99
ro.ril.hsxpa=1 - HSDPA
ro.ril.hsxpa=2 - HSDPA/HSUPA
ro.ril.gprsclass = inidcates GPRS class of target network :
Code:
Class 2 : 3 slots : 8 - 12 kbps upload / 16 - 24 kbps download
Class 4 : 4 slots : 8 - 12 kbps upload / 24 - 36 kbps download
Class 6 : 4 slots : 24 - 36 kbps upload / 24 - 36 kbps download
Class 8 : 5 slots : 8 - 12 kbps upload / 32 - 40 kbps download
Class 10 : 5 slots : 16 - 24 kbps upload / 32 - 48 kbps download
Class 12 : 5 slots : 32 - 48 kbps upload / 32 - 48 kbps download
More info Here
ro.ril.hsdpa.category =
Code:
Cat 1 = 1.2 Mbit/s
Cat 2 = 1.2 Mbit/s
Cat 3 = 1.8 Mbit/s
Cat 4 = 1.8 Mbit/s
Cat 5 = 3.6 Mbit/s
Cat 6 = 3.6 Mbit/s
Cat 7 = 7.2 Mbit/s
Cat 8 = 7.2 Mbit/s
Cat 9 = 10.1 Mbit/s
Cat 10 = 14.0 Mbit/s
Cat 11 = 0.9 Mbit/s
Cat 12 = 1.8 Mbit/s
Cat 13 = 17.6 Mbit/s
Cat 14 = 21.1 Mbit/s
Cat 15 = 23.4 Mbit/s
Cat 16 = 27.9 Mbit/s
Cat 19 = 35.3 Mbit/s
Cat 20 = 42.2 Mbit/s
Cat 21 = 23.4 Mbit/s
Cat 22 = 27.9 Mbit/s
Cat 23 = 35.3 Mbit/s
Cat 24 = 42.2 Mbit/s
Cat 25 = 46.8 Mbit/s
Cat 26 = 55.9 Mbit/s
Cat 27 = 70.6 Mbit/s
Cat 28 = 84.4 Mbit/s
ro.ril.hsupa.category =
Code:
Cat 1 = 0.73 Mbit/s
Cat 2 = 1.46 Mbit/s
Cat 3 = 1.46 Mbit/s
Cat 4 = 2.93 Mbit/s
Cat 5 = 2.00 Mbit/s
Cat 6 = 5.76 Mbit/s
Cat 7 = 11.5 Mbit/s
Not speed related, but still nice to have :
ro.ril.enable.3g.prefix : adds the 3G prefix to the operator name.
ro.ril.enable.dtm : Only set this to 1 if your network allows simultaneous transfer of Circuit switched (CS) voice and Packet switched (PS) data over the same radio channel (ARFCN).

Dude your english is a little messy, kinda hard to understand the steps..
One question though, what does the attachment for? Isn't editing the build prop enough to make it work?

read my build prop. and write the 8 line. in ur build prop

Related

Wifi SpeedTest show off X10 mini

Hey people, so what wifi speed do you get with your x10 mini?
The test :
First connection 30 MB Download / 3 MB Upload , distance router from mini 2-3 meters.
Speed : from 20292 to 23404 kbps Download , from 3009 to 3169 kbps Upload , ping 37 to 47 , kernel : nAa-08 , Rom GingerDX.v021b. See attachment FirstCon.png
Secound connection 50 MB Download / 5 MB Upload , distance router from mini more 7 meters end 1 wall.
Speed : from 19560 to 20617 kbps Download , from 5087 to 5107 kbps Upload, ping 19 to 59 , kernel : nAa-11 , Rom MiniCM7 2.2.0 . See attachemnts secound.png , kern1 , kern2.

[Q] Playback and mediacenter capability

Hi all! I'm thinking about switching to sgs3, and as for now my only doubt I wasn't able to solve is this:
looks like the sgs3 should be able to handle videos of all resolution up to 1080p mkvs (or am I wrong?).. but can't find someone who tried it with an actual ~15gb mkv, or the now quite diffused h10p (less mb same quality, it seems).
So, how far will I be able to go with this new device? (both with the default player or mx/dice)
And, about the connectivity.. does usb otg and hdmi out are both on the same port?
In other words I'll be forced to use dlna for streaming the file from my pc to the i9300 (and connect to the tv via hdmi) or to stream the video to the tv using the new accessory (when connecting an hard disk via usb), or there will be a way to use both the cable connections?
Sorry both for the confusing question and the bad english and thanks!
I have tested the following file and can confirm that it works with the default player and with MX.
Code:
General
Format : Matroska
Format version : Version 2
File size : 3.19 GiB
Duration : 1h 2mn
Overall bit rate : 7 340 Kbps
Encoded date : UTC 2011-11-02 21:24:58
Writing application : mkvmerge v4.0.0 ('The Stars were mine') built on Jun 6 2010 16:18:42
Writing library : libebml v1.0.0 + libmatroska v1.0.0
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 3 frames
Format settings, GOP : M=1, N=23
Codec ID : V_MPEG4/ISO/AVC
Duration : 1h 2mn
Bit rate mode : Variable
Bit rate : 6 509 Kbps
Maximum bit rate : 40.0 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.131
Stream size : 2.77 GiB (87%)
Writing library : x264 core 112 r1867 22bfd31
Encoding settings : cabac=1 / ref=4 / deblock=1:0:0 / analyse=0x3:0x113 / me=umh / subme=7 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=2 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=0 / chroma_qp_offset=-2 / threads=9 / sliced_threads=0 / slices=4 / nr=0 / decimate=0 / interlaced=0 / constrained_intra=0 / bframes=3 / b_pyramid=1 / b_adapt=1 / b_bias=0 / direct=3 / weightb=1 / open_gop=2 / weightp=2 / keyint=24 / keyint_min=1 / scenecut=40 / intra_refresh=0 / rc_lookahead=24 / rc=2pass / mbtree=1 / bitrate=6509 / ratetol=1.0 / qcomp=0.60 / qpmin=0 / qpmax=51 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / vbv_maxrate=40000 / vbv_bufsize=30000 / nal_hrd=vbr / ip_ratio=1.40 / aq=2:1.00
Audio #1
ID : 2
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Codec ID : A_AC3
Duration : 1h 2mn
Bit rate mode : Constant
Bit rate : 448 Kbps
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Compression mode : Lossy
Stream size : 200 MiB (6%)
Language : German
Audio #2
ID : 3
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Codec ID : A_AC3
Duration : 1h 2mn
Bit rate mode : Constant
Bit rate : 384 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Compression mode : Lossy
Stream size : 171 MiB (5%)
Language : English
I don't have a h10p file around, so I can't test that.
About the HDMI out: Yes, HDMI out and OTG both use the USB port. You have to choose one.
Thanks for your feedback!
As for hi10 files the issue may be the compression, not at all the size, so a sample video should be enough for a test..
The single connection may be a problem.. mainly for the battery!
Send me a sample video and I'll try it.
I've found one and sent you the link in pm.
That file does not work.
Samsung Video Player: audio only
MX (HW mode): audio only
MX (SW mode): audio + video, video stutters, watching is not enjoyable
I tested a 720p file too: http://forum.xda-developers.com/showthread.php?p=26662169#post26662169

[Q] I need a rom for Goohone I5

Hello everyone and thank you for the work you do. I am a new user and I recently purchased a goophone I5. it is very nice and is very fast (1536MHz (x2) with AnTuTu Benchmark 8540) but I have a problem. the phone does not mount sd card, so I decided to change rom and recovery.
with mobileuncletools I read:
Ok root (superuser already installed)
CPU
Processor = 7 ARMV processor rev. 0 (V7L)
hardware = MT6589
KERNEL
Kernel = linux version3.0.13 (root @ versionserver-desktop) (gcc version 4.4.3 (GCC)) # 1 SMP PREEMPT fri 8 March 2013 14:13:50 CSt
OS
Brand = alps
Models = iPhone5
Product = mobitak77_m01_ics2
Display = ALPS.ICS2.MP.V1.18
SCREEN
Width = 480
Higth = 854
Density Dpi = 240
RAM MEMORY
Mem total = 1922480Kb
Help me
thanks

BCMON injection attack not working

Hi, anyone here still using bcmon/aircrack-ng? Im grateful if someone can help me out. Thank you
im using korek chop chop attack for the injection attack.
i notice when i tried to use arpreplay attack, it would generated a lot of IVS until the 4 thousands packet then the #/s will dropped to 0
It is shown in the video at 6 minute 7 second
https://www.youtube.com/watch?v=ZFW9oSqyU3A
Code:
CH 9 ][ Elapsed: 16 s ][ 2007-02-04 11:04
BSSID PWR RXQ Beacons #Data, #/s CH MB ENC CIPHER AUTH ESSID
00:14:6C:7E:40:80 47 100 179 2689 336 9 11 WEP WEP teddy
BSSID STATION PWR Lost Packets Probes
00:14:6C:7E:40:80 00:09:5B:EC:EE:F2 29 0 2707
Code:
CH 9 ][ Elapsed: 16 s ][ 2007-02-04 11:04
BSSID PWR RXQ Beacons #Data, #/s CH MB ENC CIPHER AUTH ESSID
00:14:6C:7E:40:80 47 100 179 4689 0 9 11 WEP WEP teddy
BSSID STATION PWR Lost Packets Probes
00:14:6C:7E:40:80 00:09:5B:EC:EE:F2 29 0 2707

Question Existence of lag and delay in 4K video playback on Xiaomi Redmi Note 10

Hello dear friends. ​It's been three days since I bought the global version of the Xiaomi Redmi Note 10 with 6GB of RAM and 128GB of ROM. ​Today, I tried to test the video quality with 4K, but unfortunately, the audio and video are not compatible during video playback, and there is a lag and delay during video playback.​To solve this problem, most video playback software, including:​I have installed MX Player, Upupler, VLC Player, etc., but the problem has not been resolved ... ​However, I have played the same 4K videos on the Samsung A12 without any problems, while the hardware and graphics processor of the Samsung A12 are much weaker than the Xiaomi Redmi Note 10. Where do you think the problem comes from? ​The MiUI version of my phone is also 12.0.10 and the Android version is 11 ​
Can you help me about your 4k video profile and codec information, or it's happening once or every time? I need this information to help your problem.
kandhaswamy said:
Can you help me about your 4k video profile and codec information, or it's happening once or every time? I need this information to help your problem.
Click to expand...
Click to collapse
General
Complete name : Caspean-Sea-14000101.m4v
Format : MPEG-4
Format profile : Base Media / Version 2
Codec ID : mp42 (mp42/isom/avc1)
File size : 161 MiB
Duration : 4 min 8 s
Overall bit rate mode : Variable
Overall bit rate : 5 420 kb/s
Encoded date : UTC 2021-03-21 07:42:48
Tagged date : UTC 2021-03-21 08:18:10
Writing application : HandBrake 0.9.9 2013052900
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings : CABAC / 16 Ref Frames
Format settings, CABAC : Yes
Format settings, ReFrames : 16 frames
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 4 min 8 s
Bit rate : 5 000 kb/s
Width : 3 840 pixels
Height : 2 160 pixels
Display aspect ratio : 16:9
Frame rate mode : Variable
Frame rate : 23.976 (23976/1000) FPS
Minimum frame rate : 23.974 FPS
Maximum frame rate : 90 000.000 FPS
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.025
Stream size : 149 MiB (93%)
Writing library : x264 core 130 r2273 b3065e6
Encoding settings : cabac=1 / ref=16 / deblock=1:1:-1 / analyse=0x3:0x133 / me=umh / subme=10 / psy=1 / psy_rd=0.40:0.15 / mixed_ref=1 / me_range=24 / chroma_me=1 / trellis=2 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-3 / threads=12 / lookahead_threads=3 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=16 / b_pyramid=2 / b_adapt=2 / b_bias=0 / direct=3 / weightb=1 / open_gop=0 / weightp=2 / keyint=240 / keyint_min=24 / scenecut=40 / intra_refresh=0 / rc_lookahead=100 / rc=2pass / mbtree=1 / bitrate=5000 / ratetol=1.0 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / ip_ratio=1.40 / aq=1:0.90
Encoded date : UTC 2021-03-21 07:42:48
Tagged date : UTC 2021-03-21 08:18:10
Color range : Limited
Color primaries : BT.709
Transfer characteristics : BT.709
Matrix coefficients : BT.709
Codec configuration box : avcC
Audio #1
ID : 2
Format : AAC LC
Format/Info : Advanced Audio Codec Low Complexity
Codec ID : mp4a-40-2
Duration : 4 min 8 s
Bit rate mode : Variable
Bit rate : 160 kb/s
Maximum bit rate : 282 kb/s
Channel(s) : 2 channels
Channel layout : L R
Sampling rate : 48.0 kHz
Frame rate : 46.875 FPS (1024 SPF)
Compression mode : Lossy
Stream size : 4.74 MiB (3%)
Title : Stereo
Language : English
Default : Yes
Alternate group : 1
Encoded date : UTC 2021-03-21 07:42:48
Tagged date : UTC 2021-03-21 08:18:09
Audio #2
ID : 3
Format : AC-3
Format/Info : Audio Coding 3
Commercial name : Dolby Digital
Codec ID : ac-3
Duration : 4 min 8 s
Bit rate mode : Constant
Bit rate : 224 kb/s
Channel(s) : 2 channels
Channel layout : L R
Sampling rate : 48.0 kHz
Frame rate : 31.250 FPS (1536 SPF)
Bit depth : 16 bits
Compression mode : Lossy
Stream size : 6.64 MiB (4%)
Title : Surround
Language : English
Service kind : Complete Main
Default : No
Alternate group : 1
Encoded date : UTC 2021-03-21 07:42:48
Tagged date : UTC 2021-03-21 08:18:09
------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------
It should be noted that I watched the same video with the same quality with my previous phone, which was Xiaomi Redmi Pro, easily and without the slightest problem.
Sahaeil said:
General
Complete name : Caspean-Sea-14000101.m4v
Format : MPEG-4
Format profile : Base Media / Version 2
Codec ID : mp42 (mp42/isom/avc1)
File size : 161 MiB
Duration : 4 min 8 s
Overall bit rate mode : Variable
Overall bit rate : 5 420 kb/s
Encoded date : UTC 2021-03-21 07:42:48
Tagged date : UTC 2021-03-21 08:18:10
Writing application : HandBrake 0.9.9 2013052900
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings : CABAC / 16 Ref Frames
Format settings, CABAC : Yes
Format settings, ReFrames : 16 frames
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 4 min 8 s
Bit rate : 5 000 kb/s
Width : 3 840 pixels
Height : 2 160 pixels
Display aspect ratio : 16:9
Frame rate mode : Variable
Frame rate : 23.976 (23976/1000) FPS
Minimum frame rate : 23.974 FPS
Maximum frame rate : 90 000.000 FPS
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.025
Stream size : 149 MiB (93%)
Writing library : x264 core 130 r2273 b3065e6
Encoding settings : cabac=1 / ref=16 / deblock=1:1:-1 / analyse=0x3:0x133 / me=umh / subme=10 / psy=1 / psy_rd=0.40:0.15 / mixed_ref=1 / me_range=24 / chroma_me=1 / trellis=2 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-3 / threads=12 / lookahead_threads=3 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=16 / b_pyramid=2 / b_adapt=2 / b_bias=0 / direct=3 / weightb=1 / open_gop=0 / weightp=2 / keyint=240 / keyint_min=24 / scenecut=40 / intra_refresh=0 / rc_lookahead=100 / rc=2pass / mbtree=1 / bitrate=5000 / ratetol=1.0 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / ip_ratio=1.40 / aq=1:0.90
Encoded date : UTC 2021-03-21 07:42:48
Tagged date : UTC 2021-03-21 08:18:10
Color range : Limited
Color primaries : BT.709
Transfer characteristics : BT.709
Matrix coefficients : BT.709
Codec configuration box : avcC
Audio #1
ID : 2
Format : AAC LC
Format/Info : Advanced Audio Codec Low Complexity
Codec ID : mp4a-40-2
Duration : 4 min 8 s
Bit rate mode : Variable
Bit rate : 160 kb/s
Maximum bit rate : 282 kb/s
Channel(s) : 2 channels
Channel layout : L R
Sampling rate : 48.0 kHz
Frame rate : 46.875 FPS (1024 SPF)
Compression mode : Lossy
Stream size : 4.74 MiB (3%)
Title : Stereo
Language : English
Default : Yes
Alternate group : 1
Encoded date : UTC 2021-03-21 07:42:48
Tagged date : UTC 2021-03-21 08:18:09
Audio #2
ID : 3
Format : AC-3
Format/Info : Audio Coding 3
Commercial name : Dolby Digital
Codec ID : ac-3
Duration : 4 min 8 s
Bit rate mode : Constant
Bit rate : 224 kb/s
Channel(s) : 2 channels
Channel layout : L R
Sampling rate : 48.0 kHz
Frame rate : 31.250 FPS (1536 SPF)
Bit depth : 16 bits
Compression mode : Lossy
Stream size : 6.64 MiB (4%)
Title : Surround
Language : English
Service kind : Complete Main
Default : No
Alternate group : 1
Encoded date : UTC 2021-03-21 07:42:48
Tagged date : UTC 2021-03-21 08:18:09
------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------
It should be noted that I watched the same video with the same quality with my previous phone, which was Xiaomi Redmi Pro, easily and without the slightest problem.
Click to expand...
Click to collapse
Clear your player application from your recent application list and relaunch app try again play it. It worked for me.

Categories

Resources