[Q] Root and custom rom help... - Streak 5 Q&A, Help & Troubleshooting

I am having some serious issues....
I am new to the streak, and am absolutely loving it so far. I am coming over from the Samsung Captivate where I had installed CM7 and then MIUI, with no issues. But I find the streak to be a totally different animal.
I was able to find and install the official at&t 2.2 rom by renaming the package to update.pkg and placing on the external SD card. After running it from recovery I had a working 2.2 rom unrooted.
But, I want to root it. Super 1-click and androot doesn't work. And I can't even get z4root on my phone, whenever I try to DL it to my streak I get an unknown error and the phone says it can't support the file type. I want to start installing custom roms and everything, but this is so different from the samsung way to do things that I am completely lost.
Please help, and thanks. And as an fyi, I have been scouring the internet for all the necessary info, but nothing I have found helps.

you dont need to root to install a custom rom, there are multiple huge threads in the general section on rooting stock

It is probably best to read up before you do such things with you phone.
Try the beginners manual first.
Can be downloaded here
Good luck.
And if you have difficulties on installing apps outside the market, you could try these steps:
A. Setting -> Applications -> Unknown Sources. (check it)
B. Mail the APK file to the gmail-account you are using in your streak.
You can install it from you mailbox.

rain175 said:
I am having some serious issues....
I am new to the streak, and am absolutely loving it so far. I am coming over from the Samsung Captivate where I had installed CM7 and then MIUI, with no issues. But I find the streak to be a totally different animal.
I was able to find and install the official at&t 2.2 rom by renaming the package to update.pkg and placing on the external SD card. After running it from recovery I had a working 2.2 rom unrooted.
But, I want to root it. Super 1-click and androot doesn't work. And I can't even get z4root on my phone, whenever I try to DL it to my streak I get an unknown error and the phone says it can't support the file type. I want to start installing custom roms and everything, but this is so different from the samsung way to do things that I am completely lost.
Please help, and thanks. And as an fyi, I have been scouring the internet for all the necessary info, but nothing I have found helps.
Click to expand...
Click to collapse
Not Android Development
Please Post in the Correct Forums and Read THIS
Moving to Q&A

Related

Rooting Hero

hello guys. i'm from Malaysia. i recently bought HTC Hero. currently have problem with downloading application for hero and malaysia dont have android market yet. is there any way i can download any application besides android market.
i got a few question also. what the purpose of rooting the hero. if im using it in malaysia. do i need to root. will it void my warranty. thanks.
Before you even think about rooting, first read this.
The only other way to get applications/games onto your Hero without the Marketplace is to manually open the apk installation file via using Linda File Manager. You don't need to root your phone for this.
If you made a backup of your Rom using nadroid, your original Rom should be safe and your phone is still under your warranty.
The only reason to root your phone is to be able to have access to hidden files, remove unnecessary programs, have useful ones already pre-installed, speed up the phone, etc.
If you have any other issues/questions regarding what I am talking about, read the link I provided you first. It should answer all your questions.
CGeyser said:
Before you even think about rooting, first read this.
The only other way to get applications/games onto your Hero without the Marketplace is to manually open the apk installation file via using Linda File Manager. You don't need to root your phone for this.
Click to expand...
Click to collapse
Sorry, but that is not correct. There are other Market-style applications out there that he can use. e.g. SlideME, which probably came on the phone. If it didn't, you can download it directly from the website onto your phone, and install it from the browser though you need to enable Menu->Settings->Applications->Unknown Sources ticked beforehand.
The only reason to root your phone is to be able to have access to hidden files, remove unnecessary programs, have useful ones already pre-installed, speed up the phone, etc.
Click to expand...
Click to collapse
Sorry, but this isn't correct either! A *very* good reason for rooting is to use "Market Enabler" so that he can install the Market application, and enable it for a different region that supports paid apps. Other good reasons include tethering by wifi, and apps2sd.
Regards,
Dave
ok. thanks guys. does it means if i root my Hero then i can access the Market even i malaysia?
Essentially yes, though you will need to install the Market app and use the Market Enabler application to "spoof" the Market into believing your carrier is in a supported region.
Regards,
Dave
But a "problem" with this would be the phone would "believe" that you are in say "Netherlands" when you are in fact in Malaysia.
You can "solve" this by disabling automatic time / date. Enter it manually.
ok. i read on how to run app from sd card. one of the step need to flash ROM to SD card. is it ok if i use different ROM than my current Hero ROM.
As long as it is a Hero ROM, for the Hero (e.g. MoDaCo 3.0) you should be fine. You do need to be a little careful though, because devs have ported Hero/SenseUI to other phones (e.g. G1/Magic etc).
If you make a Nandroid backup before you flash the new ROM, you can always roll back to your previous ROM.
Regards,
Dave

[Q] Help needed to upgrade from 1.6

Hi,
I have a problem with upgrading and wondered if anyone could help, please. I have searched the forum and couldn't find an exact answer to my problem.
In November my wife broke the usb on her X10i and hasn't been able to upgrade to 2.1 because of Sony's lack of OTA updates.
Is it possible to root and flash 2.1 on the X10i using the SDcard only instead of connecting the phone to the PC through usb?
What is the best way to root and the best 2.1 rom to use when flashing a pay monthly O2 X10?
Thanks for any help in advance.
The model is an X10i
Firmware 1.6 (obviously)
baseband 1.0.16
Kernel 1.6.29
Build R1FA016
1. Search & download Z4 root to your sd card (use google, can't miss it)
2. Download BUSYBOX from the market
3. Follow the instructions on this link to install XRECOVERY:
http://forum.xda-developers.com/showthread.php?t=859571
After these your phone should be ready to be flashed, it's just a matter of what you want to flash it to.
Hope these help.
Thank you, I'll try your suggestions.
A standard 2.1 rom that works on an O2 x10i is fine to flash to, doesn't have to be customised or fancy. Any suggestions on the best and most stable rom to go for?
Cheers.
I think you will be fine with the Generic 2.0.2.A.0.24 build. (Thought I had the link to the zip file but I must have deleted it, I used the flashtool exclusively for 2.1 and I used xrecovery when I started to use froyo.) I've only had my x10 for a little over 2 months, flashed it to 2.1 after a few days of getting it then I switched to 2.2 betas since the new year but I was happy with that 2.1 version the short time I had it.
Thank you very much
A couple more annoying newbie question though.
I rooted the phone but couldnt install busybox from the market, does Z4 root install it when it roots the phone?
I can't move the three xrecovery files from my sdcard into the system/bin folder on the phone. Do I need to install Root Explorer from the Market to access and write the 3 files onto the phone system folder?
Thanks.
scribbling001 said:
Thank you very much
A couple more annoying newbie question though.
I rooted the phone but couldnt install busybox from the market, does Z4 root install it when it roots the phone?
I can't move the three xrecovery files from my sdcard into the system/bin folder on the phone. Do I need to install Root Explorer from the Market to access and write the 3 files onto the phone system folder?
Thanks.
Click to expand...
Click to collapse
No problem I have a few things I still need to learn myself so no worries.
First, when you run z4 root does it say that its rooted?
Did you get an error when installing busybox or are you saying you can't find it in the market?
No, z4 doesn't install busybox.
Yes, you'll need to install root explorer before you can push any file to the system/bin folder/ on the phone.
Z4root worked, i chose permanant root, when I try to install busybox I get the message
Your Phone is rooted.
Busybox was not found.
The app failed either because your device is not nand unlocked or we were unable to remount.
I installed Titanium backup to check the phone is rooted and it says it could not require root priviliges either.
scribbling001 said:
Z4root worked, i chose permanant root, when I try to install busybox I get the message
Your Phone is rooted.
Busybox was not found.
The app failed either because your device is not nand unlocked or we were unable to remount.
I installed Titanium backup to check the phone is rooted and it says it could not require root priviliges either.
Click to expand...
Click to collapse
Sounds like z4 root didn't work since 2 different apps does not see your phone as being rooted. Uninstall z4 then search and download for Universal Androot 1.6, that's the other root app I've used in the past.
Thanks.
Phone rooted, busybox and root explorer installed.
Xrecovery files moved.
Can't get into the xrecovery menu at startup
My rooted Orange San Francisco is looking like a good buy now. I'll give up on messing with the phone. Thanks for all your help and time, my wife gets a new phone in year and it will probably take me that long to get it working and for SE to release 2.2
scribbling001 said:
Thanks.
Phone rooted, busybox and root explorer installed.
Xrecovery files moved.
Can't get into the xrecovery menu at startup
My rooted Orange San Francisco is looking like a good buy now. I'll give up on messing with the phone. Thanks for all your help and time, my wife gets a new phone in year and it will probably take me that long to get it working and for SE to release 2.2
Click to expand...
Click to collapse
hi there, dont give up now, you are getting so close!
you dont really need to use xrecovery menu at all. the idea for you would be the following:
1. root the 1.6 phone - done
2. install titanium backup/my backup pro and backup your data - done (i think)
3. download the 2.1 flashtool from the following thread - http://forum.xda-developers.com/showthread.php?t=683793 (choose the appropriate ROM - if unsure ask questions! i would recommend the latest X10a_2_1_A_0_435_GLOBAL)
4. run the flash tool and update phone to 2.1
5. reroot phone with z4root and reinstall backup software
6. recover all backups and you are now done!
i should clarify also.....the reason i have recommended you NOT to use the xRecovery menu is fairly simple. If you are not planning on constantly flashing new ROMs and booting into other ROMS, then its simply not necessary for you.
The benefits of xRec are that you can take a complete backup of your phone, flash it with something else and then recover the backup when you are done. Its a simple way to flash new roms quickly, but as i said, not really necessary for you.
Flashtool is very easy to use, all the instructions are provided on the screen, and it is done in 5 minutes also, there are lots and lots of tutorials posted around the place too.
good luck!
scribbling001 said:
Hi,
I have a problem with upgrading and wondered if anyone could help, please. I have searched the forum and couldn't find an exact answer to my problem.
In November my wife broke the usb on her X10i and hasn't been able to upgrade to 2.1 because of Sony's lack of OTA updates.
Is it possible to root and flash 2.1 on the X10i using the SDcard only instead of connecting the phone to the PC through usb?
What is the best way to root and the best 2.1 rom to use when flashing a pay monthly O2 X10?
Thanks for any help in advance.
The model is an X10i
Firmware 1.6 (obviously)
baseband 1.0.16
Kernel 1.6.29
Build R1FA016
Click to expand...
Click to collapse
You are on point MRTIM, I can't argue with what you said. But like he mentioned on his first post, his wife broke the USB on the phone that's why he is doing it the long way.
@Scribbling Are you pressing the back button on the phone as soon as you see the white SE screen?
If you are still having trouble there is another way. One thing I failed to mention is the new version of xrecovery 0.3 is an actual APK file. That means you can just download it to your PC, transfer to your SD card, browse to the location on your phone then tap to install it. If you need a browser you can use ASTRO FILE MANAGER from the Market which is free.
PLEASE NOTE AND I CAN NOT STRESS THIS ENOUGH. If you are going to try and reinstall the xrecovery APK package, make sure to uninstall BUSYBOX then pull any xrecovery files that you already pushed to the phone prior to installing the v0.3 APK.
Let us know if you have any other questions. I agree with MRTIM, why stop now? You are almost there.
Thanks.
Broken Usb is the annoying bit
I'll try installing Xrecovery as an apk.
Ugh..... Xrecovery could not be installed to this device. I'll try Xrec 0.2 later, if I can find the will.

[STICKY] [FAQ] Official Atrix "Ask A Dev" & FAQ Thread (Last Update: 05/31/2011)

[STICKY] [FAQ] Official Atrix "Ask A Dev" & FAQ Thread (Last Update: 05/31/2011)
Official Atrix "Ask A Dev" & FAQ Thread
So, there's a ton of misinformation and confusion going around about the Atrix. I'm gonna go through this section best I can and pick out questions that I think should be in here. If you have one you'd like added or have a question to ask, post here and I'll answer and update the first post with the results. I will do my best to provide links, explain as best I can, and keep things UP TO DATE (which is the most important thing). I hope that users will see this thread and use it to their advantage. There's a lot of info out there, and I know it can be confusing, so I want to give everyone a place they can come ask questions or read information they know will be up to date. Feel free to ask anything you wish to know and I'll do my best to answer
PLEASE try to keep the thread clean. Post questions, keep discussion at a minimum (if there's a relevant discussion thread, I will link it here), and be polite.
Without further ado, let's get started with the basics.​Frequently Asked Question - Updated 05/31/2011
Q: "What is"/"How do I" root?
A: If you don't know what root is, chances are you don't need it. This is the basic of the basics of Android modification. Go ahead and do a little research first if you don't know what it is. You can root almost all Atrix devices using the method in this thread, just identify what device you have an follow the appropriate tutorial: http://forum.xda-developers.com/showthread.php?t=1016060
If your device isn't supported by GladRoot, you can follow this guide by jug6ernaut: http://forum.xda-developers.com/showthread.php?t=1046626
Q: What is a ROM/P-ROM?
A: This is one of the more tricky questions when it comes to the Atrix. Designgears set the standard by calling Adeo a ROM. This is loosely based in truth. When we refer to an Atrix ROM, what we are doing is basic Android customization. It could be themes, a few added features (reboot/recovery in power menu, sideloading, adding a tethering APN for certain carriers, etc), or just an automated install for a deodexed system. They are not true ROMs, but we'll take what we can get.
As of GladiAtrix3 beta, I changed the name of these mods to Pseudo-ROM, or P-ROM for short (yes, pronounced 'prom').
Q: What is an SBF? How do I flash it?
A: An SBF file is the Motorola base firmware. There are only a few SBF files available, and instructions (Thanks to seven2099) to use them can be found here: http://forum.xda-developers.com/showpost.php?p=13604217&postcount=2. The guide was written with the Bell Atrix in mind, but this process will work with any version provided you have the correct SBF for your device. This guide by kennethpenn contains links to a few of the SBFs for AT&T devices: http://forum.xda-developers.com/showthread.php?t=991072
It should also be noted that these files are NOT community provided. They are leaked from Motorola, are are technically for internal Motorola use only. Do NOT ask where we get them, how we get them, or if we can make you a custom one. We cannot.
Q: What does "deodex" mean?
A: This guide has a pretty good explanation of what the difference between odexed and deodexed is: http://www.addictivetips.com/mobile/what-is-odex-and-deodex-in-android-complete-guide/
Q: What is sideloading?
A: Sideloading lets you install any applications, regardless of carrier or market restrictions. This is also sometimes called "Unknown sources." It can be enabled several different ways. Both the GladiAtrix (for 4.1.26, 4.1.52,, 4.1.57, and 4.1.83) and GingerBlur ROMs contain it. You can also enable it using the GladiAtrix Enabler.
Q: <app> in the market doesn't work! Help!
A: There are several applications still that have not been updated to support the Atrix. It uses a lot of new hardware, and does things a little differently. Before jumping on and making a thread saying Motorola sucks for your app not working, contact the developer first and ask them to update.
User Submitted Questions - Updated 04/27/2011
Q: Is there a way to install an apk without finding it and tapping on it? Maybe through terminal emulator and if so what would the command lines be? (submitted by drock212)
A: Yes! You can install applications through ADB on your PC with the command 'adb install <app>.apk' where <app> is the filename of the app you want to install. You can also use a file manager, or as [email protected] mentioned, the Android Market website. Finally, there is a command line that you can use to install: pm install <app>.apk
Q: I have a Bell Atrix (unlocked to work with Rogers). Are there any precautions I need to keep in mind when flashing ROMs, installing the new 1.5.7 update and rooting it all using the At&t files in the Dev forum? (submitted by TareX)
A: Absolutely. As far as I know, you cannot flash any of the AT&T firmwares on a Bell Atrix. This will cause a brick and you will be unable to recover since there isn't a Bell firmware SBF available right now. If anyone has been brave enough to try and flash a Bell Atrix with AT&T firmware and has SUCCEEDED, please let me know.
Q: The atrix has 1GB of ram. Is all of that memory used on the phone or is it like what was rumored and some of it is reserved for the webtop? (submitted by RacecarBMW)
A: The webtop shares memory with the phone side. There is about 800mb free for use by both, with roughly 200mb reserved for system processes.
Q: Are more ROMs in the works? (submitted by danboard)
A: I've been working hard at getting GladiAtrix 2 to a point where I feel comfortable releasing it in CWM format. Unfortunately, I can't speak for other developers. The tools available for the Atrix are relatively limited, and we don't have a very strong base of talented people like other Motorola phones do. I'm pretty proud of what we've managed to accomplish even with such a small userbase.
Q: Can I use my phone on a carrier other than AT&T or Bell? (submitted via PM by [email protected])
A: You can, but you need to make sure that the carrier you want to use the phone on supports the same frequencies as AT&T/Bell. There are a few different ways you can get the phone unlocked. The easiest, and honestly best, way to do it is to call the carrier and ask them for an unlock code. If you're persistent and polite enough, make your case as to why you need the phone unlocked, there's a good chance they'll accommodate. Getting mad and upset rarely works. You can also get an unlock code through several different online sites. This thread talks about sites with unlock codes, and gives you a good idea which to trust. General consensus seems to be that cellunlock.net worked for most users and has a 20$ rebate coupon code: android50
Q: Can I use the Webtop without a dock? (submitted via PM by [email protected])
A: You sure can. It requires modifications to the system files, so if you don't fee comfortable making permanent changes to your phone's OS, you shouldn't be doing this. This thread has a very detailed explanation on how to get it working on your phone, but make sure you match up the proper firmware version or can potentially brick your phone.[/B]
Q: Is there a way to install a full version of linux on the Webtop? (submitted via PM by [email protected])
A: There is a project running to unlock the Webtop OS and allow you full access to install anything you wish. You can read about the progress here: http://forum.xda-developers.com/showthread.php?t=1000316
Q: I don't use the webtop. Is there any way to remove it completely to regain the space on the phone? (submitted by Girgizzlemuf)
A: Unfortunately, you cannot. The Webtop is directly integrated into the Android OS, so removing it would render your phone inoperable. I'm unsure if an unlocked bootloader will allow it to be removed either, as the entire build of Android running on the Atrix was built around the Webtop.
Q: Do I need to unlock before rooting, or are the two completely independent from eachother? (submitted by dropshipinc)
A: Unlocking and rooting are not tied together. You can root without unlock, and you an unlock without root. Unlocking is, in most cases, referring to the ability to use the phone on any carrier. This is called SIM unlocking. Rooting gives you root access to your device. On the Atrix, you cannot unlock your phone by having root. Some devices this is the case, but the Atrix is not one of them.
Q: Will installing a rom prevent OTA updates? If so, can they be easily removed so that we can install OTA updates? (submitted by ratkid2271)
A: Installing any of the currently available ROMs will prevent the phone from applying an OTA update. You should still be able to download them, but the installation will fail. As for uninstalling, you should be making a nandroid backup of your phone with CWM before installing any of them. A simple restore of that backup will prep you for an OTA update.
Special Thanks
Thanks to: drock212, TareX, RacecarBMW, danboard, [email protected], Girgizzlemuf, ratkid2271, and dropshipinc for their submissions. ​
Is there a way to install an apk without finding it and tapping on it? Maybe through terminal emulator and if so what would the command lines be?
Sent from my MB860 using XDA Premium App
It is possible through site of Android Market. Just log-in and you can search and install any app on your phone
That's the problem market doesn't work. I have the apk on an sd card but phone I need to install apk on does not have a file explorer.
Sent from my MB860 using XDA Premium App
So propably you need to enable sideloading and apply root then instal this .pak or just use the adb tool (search for "instal apk adb")
drock212,
The Atrix has a default file manager in the app menu called "Files". Once opened, just navigate to "SD card" and click the .apk.
-Opish
Yeah lol the issue isn't with my Atrix its for another phone that im trying to port stuff from my Atrix to it but the other phone is all messed up and the market wont connect and it has no file explorer lol
Sent from my MB860 using XDA Premium App
I have a Bell Atrix (unlocked to work with Rogers). Are there any precautions I need to keep in mind when flashing ROMs, installing the new 1.5.7 update and rooting it all using the At&t files in the Dev forum?
I bought it off ebay so if I brick it, it's over.
The atrix has 1GB of ram. Is all of that memory used on the phone or is it like what was rumored and some of it is reserved for the webtop?
drock212 said:
That's the problem market doesn't work. I have the apk on an sd card but phone I need to install apk on does not have a file explorer.
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
there is a file explorer on the phone, it's called "Files"
Please take the discussion to a new thread. I understand you're trying to help, but send a PM. This is Q&A only. Thanks. Updating first post with answers to the questions shortly.
Are more ROMs in the work? Correct me if I m wrong (as I don't know all that much about what the bootloader limits) but since we now have a CWM of sorts, we're able to pretty much change most parts of the android OS excluding the kernel and radio.
In this post:
http://forum.xda-developers.com/showpost.php?p=12710040&postcount=6
Kenneth stated that the Milestone had more tools and devs than the atrix to get custom roms like miui to work; the dev part I can understand but which tools exactly was he referring to? A few of the things I could think of were the script mods that were available in the open recovery for the milestone but I believe the Atrix already have these features (just not in the CWM).
So I m just wondering is the Atrix at a point where devs are able to mod it as much as the milestone? or is there still quite a ways to go?
Updated first post! Check it for your answers.
So I understand the awesomeness that is the webtop. However, I have no use for it other than to say 'HAY i got a netbook in my phone wanna see??'
Having said that... is there a way to *remove* the webtop entirely, or is this something we are going to have to wait for in the form of a custom rom / unlocked bootloader?
Girgizzlemuf said:
So I understand the awesomeness that is the webtop. However, I have no use for it other than to say 'HAY i got a netbook in my phone wanna see??'
Having said that... is there a way to *remove* the webtop entirely, or is this something we are going to have to wait for in the form of a custom rom / unlocked bootloader?
Click to expand...
Click to collapse
Unfortunately, you cannot. The Webtop is directly integrated into the Android OS, so removing it would render your phone inoperable. I'm unsure if an unlocked bootloader will allow it to be removed either, as the entire build of Android running on the Atrix was built around the Webtop.
I've accidentally partitioned my internal SD storage rendering my phone useless. Had to flash and tried all three AT&T SBF files to no avail. Bottom inch of my touch screen is horrendously off.
Anyway to get this back to the OEM settings? Flashing is no help and I'm getting daemon errors in ADB when I try manually formatting and partitioning it. Any way I could commission you to write a script? Talking to a couple others with this problem too. You'd be a hero!
Nice OP Ririal Thanks for being oh so helpful and contributing to the Atrix! Keep up the good work! I wish I can play with your ROMs Hoping that the Bell's SBF will be leaked one of these days (yes I know...wistful thinking...)
bongd said:
I've accidentally partitioned my internal SD storage rendering my phone useless. Had to flash and tried all three AT&T SBF files to no avail. Bottom inch of my touch screen is horrendously off.
Anyway to get this back to the OEM settings? Flashing is no help and I'm getting daemon errors in ADB when I try manually formatting and partitioning it. Any way I could commission you to write a script? Talking to a couple others with this problem too. You'd be a hero!
Click to expand...
Click to collapse
Unfortunately, I'm not sure what you all changed, but this is something that should not have been messed with. Especially with a locked bootloader, you should NOT be repartitioning your device. I would assume that flashing the SBF would fix this, but again, as I'm not sure what you all did I don't really know for sure.
Ririal said:
Unfortunately, I'm not sure what you all changed, but this is something that should not have been messed with. Especially with a locked bootloader, you should NOT be repartitioning your device. I would assume that flashing the SBF would fix this, but again, as I'm not sure what you all did I don't really know for sure.
Click to expand...
Click to collapse
Thanks. I know it was erroneous but it was late at night and my contacts were all gunky. I clicked on the wrong thing and the way I was holding my device I had already gotten too far into the menu by clicking too fast
Internal SD was partitioned. Flashing didn't help. Was hoping you may know but that's okay... I'll keep trying.
bongd said:
Thanks. I know it was erroneous but it was late at night and my contacts were all gunky. I clicked on the wrong thing and the way I was holding my device I had already gotten too far into the menu by clicking too fast
Internal SD was partitioned. Flashing didn't help. Was hoping you may know but that's okay... I'll keep trying.
Click to expand...
Click to collapse
Yeah, I wish I could be of more help If you do find out a way to fix it, be sure to let me know or post here, I'll add it up to the FAQ just in case anyone else makes the same mistake. Hope you get it sorted out!

[Q] Rooted?

So, I got an Atrix a few days ago and decided that it would be a good idea to root it. I ran the GingerBreak.exe file that i found on this site. I followed the instructions to the letter and got a reboot when it was done. It now has an app on there called Superuser, as it is supposed to. To the best of my knowledge the root was sucsessfull, however, I try and install CWM recovery, so that i can install something other than MotoBlur, and when i click the app to install from my sd card it tells me that for my own protection i can only run apps from trusted places. I have seached through as many forums as my eyes can handle and if anyone can tell me how to get this damb thing to work the way i want it to.
Roche173 said:
So, I got an Atrix a few days ago and decided that it would be a good idea to root it. I ran the GingerBreak.exe file that i found on this site. I followed the instructions to the letter and got a reboot when it was done. It now has an app on there called Superuser, as it is supposed to. To the best of my knowledge the root was sucsessfull, however, I try and install CWM recovery, so that i can install something other than MotoBlur, and when i click the app to install from my sd card it tells me that for my own protection i can only run apps from trusted places. I have seached through as many forums as my eyes can handle and if anyone can tell me how to get this damb thing to work the way i want it to.
Click to expand...
Click to collapse
Be right with you one sec...
Ok, sorry, first check to see if you have the option to check unknown sources, under the settings -> Application Settings.
Furthermore, I think the best way for you to do it and also get you comfortable with the file structure of your new phone would be to download Root Explorer & SQLite Editor from the market. Yes, I know they cost a few $$ but you will use them both in the future, and they are well worth it.
Once those are installed, use Root Explorer to navigate to /data/data/com.android.providers.settings/databases/settings.db
Click on settings.db and it will open with SQLite Editor.
Select "secure"
Change the value of "instal_non_market_apps" from 0 to 1, by holding down on 0 and selecting edit field. Save Changes, and back out to Root Explorer and exit.
Phone may require a re-boot.
You should now be good to go for installing non market .apk files.
Plus, now that you know how to do all that, you can also try this:
http://forum.xda-developers.com/showthread.php?t=980636
After getting CWM installed, I would suggest installing a P-ROM, such as Gingerblur or GladAtrix. These will de-odex your system and get rid of the bloatware:
Gingerblur:
http://forum.xda-developers.com/showthread.php?t=991595
GladAtrix:
http://forum.xda-developers.com/showthread.php?t=1019097
Also, you may want to attempt to unlock the boot loader (if your on a US AT&T Atrix), that way once true ROMs start coming out, you can flash them too.
http://forum.xda-developers.com/showthread.php?t=1136261
Roche173 said:
So, I got an Atrix a few days ago and decided that it would be a good idea to root it. I ran the GingerBreak.exe file that i found on this site. I followed the instructions to the letter and got a reboot when it was done. It now has an app on there called Superuser, as it is supposed to. To the best of my knowledge the root was sucsessfull, however, I try and install CWM recovery, so that i can install something other than MotoBlur, and when i click the app to install from my sd card it tells me that for my own protection i can only run apps from trusted places. I have seached through as many forums as my eyes can handle and if anyone can tell me how to get this damb thing to work the way i want it to.
Click to expand...
Click to collapse
You gotta get something enabled called sideloading working. look for something called gladenable http://forum.xda-developers.com/showthread.php?t=1017373 that'll do it or grab droid explorer http://de.codeplex.com/ that will force the install from your comp without sideloading enabled.
You can also check you have root by using the following free app from the Market:
Root Checker
Rooted with Gingerbreak
Roche173 said:
So, I got an Atrix a few days ago and decided that it would be a good idea to root it. I ran the GingerBreak.exe file that i found on this site. I followed the instructions to the letter and got a reboot when it was done. It now has an app on there called Superuser, as it is supposed to. To the best of my knowledge the root was sucsessfull, however, I try and install CWM recovery, so that i can install something other than MotoBlur, and when i click the app to install from my sd card it tells me that for my own protection i can only run apps from trusted places. I have seached through as many forums as my eyes can handle and if anyone can tell me how to get this damb thing to work the way i want it to.
Click to expand...
Click to collapse
Hi can you unroot ?
I was like you at first. I rooted a couple days ago but I couldn't download any untrusted sources apps. I was gonna go the sideloading route or use gladenabler or something. But I ran out of time near a pc to load all that stuff. So I was searching root android apps on the market and came across one called Non-Market apps enabler. It costs $1.39 or something. I was skeptical of it but I said since so cheap, let me try it out. I downloaded n installed. The app works flawlessly n like a charm. It brought the option into settings to check off allow untrusted sources download n install. It works. Ever since then, I'm now downloading any n every app I want. From the market or not. This is the fastest way to get the option checkbox untrusted sources into your rooted phone. I thought it was b.s. Bit it really works and I don't have to do all that sideloading or putting glandenabler or all that into my phone. I have the checkbox marked off now n I download what I want. Good luck. N remember, it's called Non-market apps enabler. I'm on froyo 2.2.2 build 4.1.8.3 , rooted using gingerbreak and it worked for me instantly!

[Q] Best method!?

Hey guys I'm pretty new here and i wanted to get some feedback, did not find any similar topics around.
I want to root my NT 16gb but i see a lot of different methods and ways to perform it, whats the best way of going?
CM9 or CM7?
Easiest method to do it?
i got a 16gb microSD also!
Any opinions?
THANK YOU!
Rooting and applying a custom rom like cm7 or cm9 do not necessarily go together, an unfortunate assumption many new android users make. The former allows you root access and thus you can do things with the device you otherwise would not have been able to do. Flashing a custom rom will literally change the operating system entirely. Both are also completely reversible. So the question is, what do you want? Root access or a new OS entirely (note that custom roms almost always have root access).
Sent from my NookTablet using Tapatalk
ooojnrooo said:
Hey guys I'm pretty new here and i wanted to get some feedback, did not find any similar topics around.
I want to root my NT 16gb but i see a lot of different methods and ways to perform it, whats the best way of going?
CM9 or CM7?
Easiest method to do it?
i got a 16gb microSD also!
Any opinions?
THANK YOU!
Click to expand...
Click to collapse
I'm fairly new at this also, got my 16G NT (1.4.1) a couple days ago, and I'll tell you what I did. At first, I rooted it because I wanted (at least) access to the Kindle reader, but the google market/play is not available so B&N could control it. Rooting AND installing google apps (aka gapps) give you the market and more. From there you can install the go launcher and have a pretty nice overlay that looks ICS-like. Here's what I used and it seemed to go pretty smooth:
Part 1:
This thread by the developer Indirect shows how to do the root along with gaaps:
http://forum.xda-developers.com/showthread.php?t=1466583
And here is an invaluable video from albertwertz that goes along with it. This helped me get the confidence to do it:
http://www.youtube.com/watch?v=I403bagL9rw
He has an update to this show at the beginning of the video, but I did not use that.
The secret sauce is in making a bootable SD card with both the image that gives you CWM (clockworks mod), which is basically a loader that allow you to then load the .zip file which contains the root and gapps files.
After I went through the process, nothing seemed to have changed at all on the NT, but after some head scratching I realized that gapps is the key and it had in fact been loaded. So hit the home button and then search and type in market. Voila, the google market is now there and you can download anything that is compatible with the NT (like kindle and the go launcher).
Part 2.
The go launcher is great, but everytime I hit home, I had to navigate to the go launcher and launch the nicer ics-like skin, so I decided to go for CM9. I'm not at all disappointed that I did. Netflix does not work, but seemingly everything else does and does nicely. Here's how:
Basically, you just need to get the CM9.003 file, and "flash" that just as you flashed the root and google apps zip. I'm sure you have figured out by now that flashing just means loading the new program into "flash" memory, which is just a read/write memory that is non-volatile. (does not erase at power down).
What I wound up up doing is placing the CM9 zip file on a separate SD card, then used the one I originally used for rooting to get into the CWM recovery program. Once there, pop it out and insert the CM9 zip and run that one from CWM. Reboot and you're running Android 4.0.4.
Here's the link for the CM9 install, courtesy of developer chrmhoffmann:
http://forum.xda-developers.com/showthread.php?t=1534192
Here's a link to the CM9 zip:
http://goo.im/devs/chrmhoffmann/cm9/update-cm9-acclaim-alpha0.03-fullofbugs.zip
One more thing: You actually should put two zips on that 2nd SD, the 2nd one being google apps (aka gapps), as for some reason it is not included in the CM9 zip as it was in step 1. Here's the link to that file:
http://wiki.cyanogenmod.com/wiki/Latest_Version/Google_Apps
It's the app for CM9, and just in case, here's the download link:
http://cmw.22aaf3.com/gapps/gapps-ics-20120317-signed.zip
So now you have 2 zips on the 2nd SD card. Run them both, first the CM9 zip and then the gapps zip, reboot.
Sorry that's so long, but that's what I did and it worked out well for me once I figured it out...
---------- Post added at 04:13 PM ---------- Previous post was at 04:07 PM ----------
One more thing. When you get into the CWM recovery program (the one you'll see when you boot from the 1st SD card, don't forget to run a backup of the original ROM, IE the factory version in case you want to go back.
I'm not an expert on the backup and recover process, and there apparently other ways to restore to the original NT 1.4.0 or 1.4.1, but I would do that anyway...
I wanted to say "very good" ! . and a note that i think should be added... is the importance of wiping the dalvik and the data cache within the flash process. . lots of people get clobbered by this ommission.
georgia boy said:
One more thing: You actually should put two zips on that 2nd SD, the 2nd one being google apps (aka gapps), as for some reason it is not included in the CM9 zip as it was in step 1.
Click to expand...
Click to collapse
Allow me to explain. Gapps, or google apps are a seperate package of apps created by google. They are not apps that are included with "pure" Android and thus Google does not want them included with roms for whatever legal reasons. They were included in the step 1 you gave because that is simply rooting. Rooting and throwing apps onto a rom like the stock version is not flashing a custom ROM. In fact its no different than if a developer were to release a custom rom that didnt have root access, but someone wrote a script that gave you root access and installed those google apps.
tl;dr gapps are legally required to be a separate package from custom roms.

Categories

Resources