I was trying to update my phone from gingerbread 2.3.3 to ice cream sandwich. but for some reason it did not go well, so i am all stuck. I tried so many things people suggested in here. Last thing i tried is to flash it with gingerbread firmware as explained in adroiddevicesdotcom. sorry its not letting me paste the full link of any third party website.
now i can see startup screen where it reaches up to big "S" sign with samsung galaxy 2 written at the bottom but its just looping at same screen.
Could anybody please suggest me what else i can try to install its original OS again.
Thanks,
If you need any other info please let me know
Use odin
I have tried odin to flash gingerbread firmware but still did't help, could you please send me the link where i can download the required files
i know how to use odin just looking for right file
Thanks for your reply
bindudhindsa said:
I have tried odin to flash gingerbread firmware but still did't help, could you please send me the link where i can download the required files
i know how to use odin just looking for right file
Thanks for your reply
Click to expand...
Click to collapse
You can find firmware here:www.sammobile.com
*coughs* Or funnily enough, you can find firmware here and here
Why are you even messing with ICS if you reallly have no idea what you are doing? Didn't you read?
Simple solution to boot loop is a factory reset. I have done this numerous times after flashing a new ROM. Works all the time.
Sent from my ThinkPad Tablet using XDA App
mattyh77 said:
Simple solution to boot loop is a factory reset. I have done this numerous times after flashing a new ROM. Works all the time.
Sent from my ThinkPad Tablet using XDA App
Click to expand...
Click to collapse
Works for many rom flashes and is always worth trying some just wont boot first time .
jje
I will try the firmware you guys provided and let you know. Any special instructions before i try this please let me know
I have already tried factory reset so many times but for some reason factory reset is not working.
Thanks a lot to all of you guys..
So you have a bootloop.... did you try the bootloop thread? lol
Want to make my SGS2 so that i can send it to Samsung
hello my problem is that i need a firmware and kernel version that i can send my SGS2 back to Samsung.
i want to set my SGS2 back to the moment when i bought it.
can me anyone send links etc. whit the firmware version and the other stuff(tutorials...)
thx
afura86 said:
hello my problem is that i need a firmware and kernel version that i can send my SGS2 back to Samsung.
i want to set my SGS2 back to the moment when i bought it.
can me anyone send links etc. whit the firmware version and the other stuff(tutorials...)
flash stock rom via Odin and how on earth can we tell what your firmware version is you pick one .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Click to expand...
Click to collapse
it is my first flash in my life and on my SGS2 sorry.
hello as other members suggested i tried both files in the link thru odin to flash my samsung galaxy 2 . my network is bell canada so i installed both .tar files from the link. As per odin instructions i added first file in PDA section and second file in Phone section. but after pressing start its giving me fail error in odin after complete process. please suggest if i can try anything else
Sent from my GT-I9100M using XDA App
bindudhindsa said:
hello as other members suggested i tried both files in the link thru odin to flash my samsung galaxy 2 . my network is bell canada so i installed both .tar files from the link. As per odin instructions i added first file in PDA section and second file in Phone section. but after pressing start its giving me fail error in odin after complete process. please suggest if i can try anything else
Sent from my GT-I9100M using XDA App
Click to expand...
Click to collapse
Was the com box yellow and does ur pc recognise ur phone?
Sent from my GT-I9100
Yes the ComBOx turned yellow when i connected my phone with odin and yes my pc recognize my samsung , i was able to do it full process but only at end it showed FAIL.
Related
i need to unroot my device to get it replaced under warranty as i am facing terrible heating and battery problems.
i have read a lot and tried all methods i could find... but i am unable to remove the Superuser and CWM apps.
i rooted with Chainfire's method.
PLease Help urgently.
flash a stock rom and you'll be unrooted , if the apps still there do factory reset
http://forum.xda-developers.com/showthread.php?t=1075278
nechmadi said:
flash a stock rom and you'll be unrooted , if the apps still there do factory reset
http://forum.xda-developers.com/showthread.php?t=1075278
Click to expand...
Click to collapse
i have read that already and tried to flash the stock firmware back using odin.. but no luck.
flash rom?? please elaborate...!!
the firmware i flashed was like 7 mb.
i would not want to factory reset my phone as the problem i am facing might stop for a day or two, cause thats what happened when i did it earlier. and i am going to get the phone replaced today itself.
vinaymieux said:
i have read that already and tried to flash the stock firmware back using odin.. but no luck.
flash rom?? please elaborate...!!
the firmware i flashed was like 7 mb.
i would not want to factory reset my phone as the problem i am facing might stop for a day or two, cause thats what happened when i did it earlier. and i am going to get the phone replaced today itself.
Click to expand...
Click to collapse
Look for intratech's thread in development. He even gives directions.
Sent from my GT-P1000 using XDA Premium App
Firmwares are well over 200mb.To flash a new rom go to samfirmware.com choose the original firmware you had or one similar and then extract the folder downloaded. Put the phone.in download mode. For PDA use.the file with PDA in etc. Click repartition and use ext4 pit file.
vinaymieux said:
i have read that already and tried to flash the stock firmware back using odin.. but no luck.
flash rom?? please elaborate...!!
the firmware i flashed was like 7 mb.
i would not want to factory reset my phone as the problem i am facing might stop for a day or two, cause thats what happened when i did it earlier. and i am going to get the phone replaced today itself.
Click to expand...
Click to collapse
Sent from my GT-I9100 using XDA App
OMG OMG FIRE FIRE!!!!
First, stop panicking, and post in Q&A where this belongs.
You need to do a full ODIN flash of a stock ROM. You would do this by going to Intratech's thread, and selecting the suitable firmware for your region and carrier/unbranded device.
Unzip the self extracting exe etc, and you will have the stock ROM file. ODIN it as a PDA.
This won't factory reset the phone, but if it won't boot, that might give you another example of something wrong with it... You can factory reset via stock recovery, if needed, by holding volume up + home + power, and choosing to reset.
FIRST AND FOREMOST...SUCCESS ... UNROOTED!
I WAS FLASHING THE FIRMWARE (7MB) NOT THE ROM (200MB)
AND NOW DONE!!
pulser_g2 said:
OMG OMG FIRE FIRE!!!!
First, stop panicking, and post in Q&A where this belongs.
Click to expand...
Click to collapse
:-D , tell me about it...lol..sorry for posting here i thought it belonged here due to rooting.
THANKS... EVERYONE! NOW I JUST HOPE THEY REPLACE MY PHONE EASILY.. ALSO HOPE THE NEW ONE DOESN'T COME OUT TO BE SAME!!
uhgyjguyhihiuiojm
bboylost said:
uhgyjguyhihiuiojm
Click to expand...
Click to collapse
Sent from my GT-I9100 using XDA Premium App
just have a look on android development and find the flashing stock firmwares thread
Let us know if they replace your phone as I assume your binary count would be at least 1?
Got the phone replaced yesterday! No problems til now, fingers crossed.
Thanks for the help guys!
Sent from my GT-I9100 using XDA Premium App
hey guys!
So I have had my phone for about 3 month, and today I had decided that I should see if they're any firmware updates since I had not checked in a while. So I did a search in my settings and it said I need to update so I did so. So it downloaded and it seemed to install but when it went to reboot, it just stayed on the boot screen.
I went into recover mode and set it back to factory settings, but still had no luck. Any ideas what to do as plan b?
Give it a few minutes (5-10 Mins) for the first time after updating... It may seem locked up but usually its not the case... After the first boot.. It will boot normally again....
If truly not working suggest downloading latest firmware package for your model and try flashing via odin
hope that helps^^
Sent from my SHW-M250K using XDA App
http://forum.xda-developers.com/showthread.php?t=1108499
jje
nah I had no luck. I left it a good hour after the update and it still did it.
Is it possible to find the official firmware online?
alexbrugs said:
nah I had no luck. I left it a good hour after the update and it still did it.
Is it possible to find the official firmware online?
Click to expand...
Click to collapse
Branded Provider roms post dev section
Stock Samsung roms .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Help out...Samsung galaxy can't boot
Hello Guys,
I am not sure whether I am putting right question in the right place or not? I hope you guys don't mind and apologize me as my mind not working due to my foolish act trying to fly even without wings.....
Here is the story
I got my galaxy s2 I9100 a week ago. I tried to go for root. for this I did it using Odin v1.85. My firmware KH5 as its not available here I tried a related one say KH4. I followed all instructions carefully. Successfully brought in download mode. selected the download mode. connected with odin and browse the PDA .tar file. my mobile was recognized by yellow indicating and I starting. It showed the process running and also showed yellow bar turning in green saying "Pass". But soon mobile stucked at boot page and a yellow triangle appeared. Now I realized I made something wrong in eager of rooting. I tried other .tar files like KH1, KH3 and even KF- etc. But same problem. I tried to solve it by bringing recovery mode but It can't go to recover mode even. Now I can only go to download mode can try flashing via odin but can't get my mobile ahead of boot logo. Please helppppppppppppppppppppppppppp
@ habeebrasheed,
Flash stock firmware from Intratech thread via Odin with phone in download mode.
Then you will have a working phone and can start fresh.
Sent from my GT-I9100 using xda premium
Thanks anyway
@UpInTheAir
Thank you for the suggestion
I have submitted it as the warranty still void ... lets see if they do it or reject straigh forward. Thank you. I will sure keep in mind your solution,
Thankssssssssssssssssssss
Only one button, "Close program" is available to me. What do I do?
Further info:
I followed the steps in this post to the letter: http://forum.xda-developers.com/showthread.php?t=1671969 (which I also verified using a video on youtube)
The Odin window is fuzzy white but I can see it got to the stage Check MDF /// Please wait
I was in the process of flashing stock firmware taken from Intratech's androidfirmware.net site.
The phone is brand new, I was flashing back to stock from AOKP because of an issue with the phone calls not sending or receiving any sound
EDIT: After 5 minutes, I faced my fate and clicked it. I tried again with Odin v1.85 to no avail. The program also crashed 2 seconds into the process. Have I bricked my brand new phone? :crying:
Odin downloads nothing its an installer .
One stop Kies running via Task Manager
Two connect with Samsung USB cable to a mainboard port only .
Three i suggest you download a new copy of the firmware and also of Odin just in case .
Four start again following instructions as posted here .
http://forum.xda-developers.com/showthread.php?t=1671969
jje
kelevra7 said:
Only one button, "Close program" is available to me. What do I do?
Further info:
I followed the steps in this post to the letter: http://forum.xda-developers.com/showthread.php?t=1671969 (which I also verified using a video on youtube)
The Odin window is fuzzy white but I can see it got to the stage Check MDF /// Please wait
I was in the process of flashing stock firmware taken from Intratech's androidfirmware.net site.
The phone is brand new, I was flashing back to stock from AOKP because of an issue with the phone calls not sending or receiving any sound
EDIT: After 5 minutes, I faced my fate and clicked it. I tried again with Odin v1.85 to no avail. The program also crashed 2 seconds into the process. Have I bricked my brand new phone? :crying:
Click to expand...
Click to collapse
Hi again, if u can get into download mode you're OK. If not ,u need to buy a USB jig from ebay to get into download mode.
If u can get into download mode,do this..go to development forum and download "galaxy s3 toolkit v3" and Dl. To pc.
Now go to samfirmware.com and register. Go to galaxy s3 firmware and select LFB rom and download it to your PC. Extract the zip file so u end up with 3 files(maybe5) u need PDA, phone and csc files. Put in place on your PC so its easy to find. Now run the toolkit and follow instructions on how to flash.(use numbers to navigate and enter to select)
Ps. Password is samfirmware.com to extract the rom.
write me if u need assistance or here
JJEgan said:
Odin downloads nothing its an installer .
One stop Kies running via Task Manager
Two connect with Samsung USB cable to a mainboard port only .
Three i suggest you download a new copy of the firmware and also of Odin just in case .
Four start again following instructions as posted here .
http://forum.xda-developers.com/showthread.php?t=1671969
jje
Click to expand...
Click to collapse
Hi JJE, thanks for the reply!
This was indeed the guide that I was following. Yet I have repeated the steps to no avail. The phone now hangs at the SAMSUNG screen and glows when I try and switch it on normally.
This was in fact the second version of the same firmware I am trying to flash, the first being a hotfile download linked from this site. How should I proceed now?
kelevra7 said:
Hi JJE, thanks for the reply!
This was indeed the guide that I was following. Yet I have repeated the steps to no avail. The phone now hangs at the SAMSUNG screen and glows when I try and switch it on normally.
This was in fact the second version of the same firmware I am trying to flash, the first being a hotfile download linked from this site. How should I proceed now?
Click to expand...
Click to collapse
Have u tried to reboot into download mode again?
zodiaxe66 said:
Hi again, if u can get into download mode you're OK. If not ,u need to buy a USB jig from ebay to get into download mode.
If u can get into download mode,do this..go to development forum and download "galaxy s3 toolkit v3" and Dl. To pc.
Now go to samfirmware.com and register. Go to galaxy s3 firmware and select LFB rom and download it to your PC. Extract the zip file so u end up with 3 files(maybe5) u need PDA, phone and csc files. Put in place on your PC so its easy to find. Now run the toolkit and follow instructions on how to flash.(use numbers to navigate and enter to select)
Ps. Password is samfirmware.com to extract the rom.
write me if u need assistance or here
Click to expand...
Click to collapse
Hi again! Sorry to take up so much of your time Do you mind if I ask what the LFB rom is? I think I know how to get back to AOKP but I need to revert it to the stock firmware so I can return my handset.
kelevra7 said:
Hi again! Sorry to take up so much of your time Do you mind if I ask what the LFB rom is? I think I know how to get back to AOKP but I need to revert it to the stock firmware so I can return my handset.
Click to expand...
Click to collapse
Its just the latest firmware and samfirmware.com is "official" Samsung firmware site
You may want to try this
http://forum.xda-developers.com/showpost.php?p=28644811&postcount=2
Worked for me
I also wiped using stock recovery afterwards
zodiaxe66 said:
Its just the latest firmware and samfirmware.com is "official" Samsung firmware site
Click to expand...
Click to collapse
For_itembine said:
You may want to try this
http://forum.xda-developers.com/showpost.php?p=28644811&postcount=2
Worked for me
I also wiped using stock recovery afterwards
Click to expand...
Click to collapse
Thanks for the link but I cannot access CWM recovery. I have since fixed it by simply repeating the process with yet another version of the firmware. This time I followed it up with a factory reset that I accessed through [power+volume up+home] combination. I have used up my daily limit of thanks but will come back tomorrow to give credit where it's due. Thanks everybody.
Odin stop working when finally i click start button
Odin stop working after click start button and also i connect back panel usb port of cpu box
kelevra7 said:
only one button, "close program" is available to me. What do i do?
Further info:
i followed the steps in this post to the letter: http://forum.xda-developers.com/showthread.php?t=1671969 (which i also verified using a video on youtube)
the odin window is fuzzy white but i can see it got to the stage check mdf /// please wait
i was in the process of flashing stock firmware taken from intratech's androidfirmware.net site.
the phone is brand new, i was flashing back to stock from aokp because of an issue with the phone calls not sending or receiving any sound
edit: After 5 minutes, i faced my fate and clicked it. I tried again with odin v1.85 to no avail. The program also crashed 2 seconds into the process. Have i bricked my brand new phone? :crying:
Click to expand...
Click to collapse
I have the international edition of the S3 that a was messing around with, and I ended up installing some rom and now I can't even get into recovery. I've searched around and tried multiple methods of fixing it. The only thing I can access is download mode. Can anyone help?
same my condition ..... it's looks like sudden death ..... try flash any recovery files ... if not ... ur last hope doing PIT then if u failed to 100% successfully .... need a new MotherBoard ... replace it if warranty recover
ps: act like fool and tell them u have sudden Death and u didnt play with anything (dont mention ur flash custom rom/firmware ....it will cancel ur warranty)
sry for lose man , u not the only one ... i cant even replace it with warranty due to bought from another country
good luck
speedman2202 said:
same my condition ..... it's looks like sudden death ..... try flash any recovery files ... if not ... ur last hope doing PIT then if u failed to 100% successfully .... need a new MotherBoard ... replace it if warranty recover
ps: act like fool and tell them u have sudden Death and u didnt play with anything (dont mention ur flash custom rom/firmware ....it will cancel ur warranty)
sry for lose man , u not the only one ... i cant even replace it with warranty due to bought from another country
good luck
Click to expand...
Click to collapse
Do you know where I could find instructions on how to flash a PIT?
this is file come from sammobile.com website
providing u the right PIT file with flasher
http://www.mediafire.com/?ddfpfkk2pb8326k
connect ur mobile , open odin program and then press on PIT button and navigate PIT files then (as i think) choose the latest PIT file with name i9300 (ur mobile Model) and latest date and then hit start ..... good luck but i recommend u send it to ur Samsung repair center if warranty cover
good luck
stop!
before messing with pit files, which is extremely dangerous, flash a stock ROM through Odin and then do a factory reset from recovery
Glebun said:
stop!
before messing with pit files, which is extremely dangerous, flash a stock ROM through Odin and then do a factory reset from recovery
Click to expand...
Click to collapse
Exactly this^^^^....pit file flashing is an absolute last resort, not a first solution
did you tried flashing 4.0.4 stock rom with odin?
same thing happened to me 2 weeks ago, flashing 4.0.4 and after that flashing 4.1.2 fixed it.
try to do not mess with pit especially if you didn't backup your efs folder. it is not needed.
redstreetwalker said:
it is not needed.
Click to expand...
Click to collapse
moreover, it can render your phone irreparable
Ganjasaur said:
now I can't even get into recovery. The only thing I can access is download mode.
Click to expand...
Click to collapse
Glebun said:
stop!
before messing with pit files, which is extremely dangerous, flash a stock ROM through Odin and then do a factory reset from recovery
Click to expand...
Click to collapse
he cant go to Recovery mode ......(same like my condition) , he just can go to download mode
Glebun said:
stop!
before messing with pit files, which is extremely dangerous, flash a stock ROM through Odin and then do a factory reset from recovery
Click to expand...
Click to collapse
I've already tried to flash a stock firmware, but I still couldn't get it into recovery. I'm not sure if it was the right one though. I have a regular unbranded SIII, is there a specific firmware I should flash?
speedman2202 said:
he cant go to Recovery mode ......(same like my condition) , he just can go to download mode
Click to expand...
Click to collapse
okay? the first thing to do here is just flash a stock ROM, no need for pit files
Mine was stuck before than samsung logo, on the model number screen. Almost 1 second or less after opening the device.
Then i flashed 4.0.4 and magically it opened without any loop or something. Its useless to flash 4.1.2 or any other jb stock rom, for some reason it seems not fixing the loop issue.
Again, there is no problem related with pit files.
Sent from my GT-I9300 using xda premium
It's all individual, what worked for you might not work for others. Don't say that flashing JB is useless, because it's not
I flashed stock 4.0.4 firmware through odin. The operation was successful, but I was still unable to enter recovery. What am I doing wrong?
Ganjasaur said:
I flashed stock 4.0.4 firmware through odin. The operation was successful, but I was still unable to enter recovery. What am I doing wrong?
Click to expand...
Click to collapse
Follow the steps to root and flash your custom ROM again as if you just got your phone. The same thing happened to my T999, and it took me 3 tries doing this to finally get back into Recovery.
try to flash in odin stock rom then root use cwm then try to go to recovery..
My cousin's having the same exact issue and we've been unable to find the proper rom. Can anyone please tell me where to get one? I've downloaded some "international" ones but when i try to upload it it keeps telling me failed, i've tried at least 4 or 5 different roms.
ANY help would be greatly appreciated!!
Phone is:
GT-i9300
using it in the US with StraightTalk in the US (been working like a charm for ~6 months, all of a suddent when into this weird limp mode)
Phone was running jellybean 4.1.1 (through kies) and not rooted
Try several times before giving up. Sometimes it works after when the device feels that you've had enough stress and fear.
I mean the problem is common but it's solved in different ways or different repeats.
But it seems that your problem is a software problem that can be solved.
Glebun said:
It's all individual, what worked for you might not work for others. Don't say that flashing JB is useless, because it's not
Click to expand...
Click to collapse
Sorry for the misunderstanding, i mean flashing jb was useless for me in that situation. Thanks for the correction
Sent from my GT-I9300 using xda premium
Hello,
I'm having a strange problem since I'd flashed Cyanogenmod 10.2 on my device. I was running smooth for couple of days and then suddenly it restarted and stuck on Samsung bootlogo. Whenever I'd tried to power on it was stuck there. Then I tried odin flash stock latest NG3 rom and the phone asked for pit. After this it's not working anymore except the Download mode. It shows on odin but when I try flashing anything it fails all the time. Please if anybody can help me on this :crying:
I had never have a problem of this kind while flashing other devices hundreds of times but this one.
Pictures below:
Phone recognized by Odin 3.07 (also any version of Odin)
https://lh5.googleusercontent.com/pGJ2i4tHrJ793tZ8_QlExNjqrjp_7FgCFnhkJrRxqjQ=w339-h262-p-no
With only pit (also with ticked Auto Reboot and F. reset time)-
https://lh6.googleusercontent.com/4wvozjEM78d6gCxnjitqfTVeVq2mm-XKjUS0PBC4f-Y=w337-h262-p-no
With stock recovery-
https://lh3.googleusercontent.com/YAEeTv1yj3Mt8DOdVGKMlS3SkkcvKkdiWlvAH2XnUGA=w335-h262-p-no
With pit and stock image-
https://lh5.googleusercontent.com/YZEBDcmMnEyXZnPP7IS_a20LrqefqgsINUpYtG4K728=w338-h262-p-no
With Stock image-
https://lh3.googleusercontent.com/-IUCCLVJfPS5RfHpFW9_b2dI1-1rEanO0QzLnG0UaVg=w338-h262-p-no
Condition of the device now:
Power On-
https://lh4.googleusercontent.com/ieJG-aQEo7bTpCN4YdKTAWnwCcacIN1WNMNn9lkHqMw=w195-h260-p-no
Recovery Mode-
https://lh6.googleusercontent.com/6FCnGV--qLfFB92m-2PNmzd7h0bUdmJxcHfz_Ztc0kw=w195-h260-p-no
Download Mode 1-
https://lh3.googleusercontent.com/pa7FCzyC23KPRTeyNSDyG46KTA0XofHBby4uAMxJX8o=w195-h260-p-no
Download Mode 2-
http://forum.xda-developers.com/album.php?albumid=11597&pictureid=46943
>>please can anybody say whats problem is and can it be solved<<
Attachments: https://plus.google.com/photos/1105...ms/5923872824339082913?authkey=CLLZp-mf_LS7Ww
@mistermish2000, I'm not a pro but I believe that your partition is corrupted.
If you flashed with PIT selected then you can try to use a recovery firmware for your device from XDA. That would be a last resort though.
thanks RazorMC. I tried with stockrecovery file with no luck, but can u suggest any recovery firmware for the I9300 version please. I'm also looking but if u know any that worked before please suggest. thanks again
mistermish2000 said:
thanks RazorMC. I tried with stockrecovery file with no luck, but can u suggest any recovery firmware for the I9300 version please. I'm also looking but if u know any that worked before please suggest. thanks again
Click to expand...
Click to collapse
No this is a sign of complete eMMC failure see this post >> http://forum.xda-developers.com/galaxy-s3/help/problem-white-screen-black-lines-rain-t2467459 << I have never seen anyone recover from this and I have seen quite a few posts with the same problem. Service repair recommended :crying:
Try reading the 'dead boot repair solution' thread in general forum, a repair shop with a z3x box will be able to tell you if the emmc is totally fried.
mistermish2000 said:
Hello,
I'm having a strange problem since I'd flashed Cyanogenmod 10.2 on my device. I was running smooth for couple of days and then suddenly it restarted and stuck on Samsung bootlogo. Whenever I'd tried to power on it was stuck there. Then I tried odin flash stock latest NG3 rom and the phone asked for pit. After this it's not working anymore except the Download mode. It shows on odin but when I try flashing anything it fails all the time. Please if anybody can help me on this :crying:
Click to expand...
Click to collapse
You Have Nothing To Loss Try To ReROOT Your Device & Flash Stock ROM
Take a look at THIS
Sorry for the late response. Thank u very much guys for ur kind solutions. But I also thought it's about the hardware so nothing to do now it's a trash. But thank u anyway for showing the ways. Best wishes for all :thumbup::thumbup:
Sent from my SM-N9005 using XDA Free mobile app
mistermish2000 said:
Sorry for the late response. Thank u very much guys for ur kind solutions. But I also thought it's about the hardware so nothing to do now it's a trash. But thank u anyway for showing the ways. Best wishes for all :thumbup::thumbup:
Sent from my SM-N9005 using XDA Free mobile app
Click to expand...
Click to collapse
good luck man:good: