Related
Hi guys, i'm using sk17a , i bought my phone in usa,
i cracked my bootloader and rooted my phone, try to use a custom rom,
i installed it, but i do'nt like it when i reboot my phone and try to rom again
i made a mistake and used a rom for x10mini pro ( my old phone)
i used cm7 v20 for xperia x10 mini pro.
now i can enter fastboot mode and recovery mode on my mini pro, but i can't rom my rom,
my phone gives some errors, (STATUS 7 error)
i attached the pics of these errors, how can i fix this problem ?
please help me ?
i used cm mango v20, i worked before, but now when i try to install , i got error message, i take pic of the error message
i tried to recovey but there's still problem
i tried 3 different sd card, normally i m using team class 10 8gb micro sd,
i tried to flash new kernel, and try to use the new update form freexperia procejt via fastboot mode ( use as admistrator mode to install new flash )
please help me and say what should i do,
sorry for my bad english , and thanks for ur help
i attached the pics of attached message, please help me,
ok i solved my problem , now i'm using my new rom but now i have a problem to
i cant acess to market,
i run the market.apk,
it runs, it says" u need sign in" then when i say ok, the app closed..
please help me how can i access market ?
Hi!
My device will not boot (Stuck at Sony Ericsson-logo)
with this ADB message:
?:??: W/?(?): - exec '/system/bin/sh' failed: No such file or directory (2) -
So i figure i need to reflash
boot.img
system.img
recovery.img
Could anyone make my day and provide these?
Or any other possible solutions?
btw. Flashtool gives this error:
14/019/2012 13:19:39 - INFO - Searching Xperia....
14/019/2012 13:19:39 - ERROR - USB\VID_0FCE&PID_ADDE\6&3B2ADAA6&0&1
14/019/2012 13:19:40 - INFO - Searching Xperia....
14/019/2012 13:19:40 - ERROR - USB\VID_0FCE&PID_ADDE\6&3B2ADAA6&0&1
14/019/2012 13:19:41 - INFO - Searching Xperia....
14/019/2012 13:19:41 - ERROR - USB\VID_0FCE&PID_ADDE\6&3B2ADAA6&0&1
do you use the original SE USB cable?
or a cheap one?
also I know that XPERIA active is water resistant.. did you bathed your phone?
and try to flash with wotan =)
Try with wotan server or flashtool.
Sent from my ST17i using XDA
Hi! It worked, I am now able to boot into stock rom, but now I have an issue of the touchscreen not working..
Any past experiences?
Left side of the screen does not respond to touch, and the right side responds poorly.
wulltd said:
Hi! It worked, I am now able to boot into stock rom, but now I have an issue of the touchscreen not working..
Any past experiences?
Left side of the screen does not respond to touch, and the right side responds poorly.
Click to expand...
Click to collapse
Check out this thread.
Hello guys,
I´m new here, and before everyone starts throwing stones on me , I´ve already tried some steps and got stuck (the welcome video is awesome! hehe).
Well, I tried to update my android on my phone, and after the reboot, got stuck on sony ericsson title screen.
1. I searched over the internet same issues, and i got this thread : http://forum.xda-developers.com/showthread.php?t=1602489 .
2. I followed Someguyfromhell indications at this thread : http://forum.xda-developers.com/showthread.php?t=1568792
3. I got the flash tool , PC companion, base drivers, and the ftf file for flashing.
4.After install flash tool, selected the ftf file, and got this message :
05/019/2012 14:19:47 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
I think the rom file is not compatible with my phone (2010 production date).
I tried to find other ftf files, without success.
Anyone can help me with that?
Thanks in advance
Use the repair option in PC Companion to restore your stock firmware if at all possible.
After that, you can tell us how you tried to update the android on your phone, like: what did you want to update it to, which rom did you choose, what steps did you take...
By the way... the links you provided were for 2011 devices, Experia Mini and Mini Pro
the 2010 devices are Experia x10 mini and x10 mini pro. Different hardware altogether, I know it's confusing but please be careful where you choose your new software from
Don't feel too bad though, we've all made mistakes, just try to be a bit specific as to what you did first that made your phone get stuck, we can go from there.
well
Hello Guys,
After a loong search i found one ROM who fits with my cellphone - kind of old one.
I followed the steps on flashtool and "recovered". Sometimes it acts strange : if I turn off, it's very difficult to turn on in normal ways.. i need to plug on usb or re-flash... and if I switch the sim card, sometimes works, sometimes not...
Now its stable, but I think something is wrong.
and i got this information about my current version status :
Model : U20i
Firmware Version : 1.6
Kernel : 2.6.29 [email protected] #1
Compilation Number : 1.1.A.0.8
Is there any possibility to upgrade my android version?
use the upgrade option in PC Companion
Again... what rom did you download, what steps did you take.. be specific when you ask questions, and please, let us know if you tried the advice given when you ask a question
gzanelatto said:
Hello Guys,
After a loong search i found one ROM who fits with my cellphone - kind of old one.
I followed the steps on flashtool and "recovered". Sometimes it acts strange : if I turn off, it's very difficult to turn on in normal ways.. i need to plug on usb or re-flash... and if I switch the sim card, sometimes works, sometimes not...
Now its stable, but I think something is wrong.
and i got this information about my current version status :
Model : U20i
Firmware Version : 1.6
Kernel : 2.6.29 [email protected] #1
Compilation Number : 1.1.A.0.8
Is there any possibility to upgrade my android version?
Click to expand...
Click to collapse
are you have try use SEUS new version to get SE original rom+kernel , its work to me when i downgrade my E10i from MiniCM9 to SE original stock.
if you want to upgrade your phone to android 2.3 you can try MiniCM7 for U20i or for MiniCM9 for android 4.0.4.
I already try used MiniCM7 and MiniCM9 with nAa kernel, and its work fine to my E10i.
Help
i have the same problem i try to install MiniCM9 and it get stuck what should i do?
ivaneirox said:
i have the same problem i try to install MiniCM9 and it get stuck what should i do?
Click to expand...
Click to collapse
Where do you get stuck? What steps did you take? Give us some information to work with, otherwise no one can help you.
What device do you have?
Did you install the proper kernel?
What does your phone do when you turn it on after flashing?
I had the same problem for a long time aswell, wat u need to do is use pc companion to upgrade to firmware 2.1 and then root ur fone using superoneclick and then search for a video on youtube on "how to install xrecovery on x10 mini pro" and then choose ur rom from xda then falsh it
stucked while installing rom
SmG67 said:
Where do you get stuck? What steps did you take? Give us some information to work with, otherwise no one can help you.
What device do you have?
Did you install the proper kernel?
What does your phone do when you turn it on after flashing?
Click to expand...
Click to collapse
i hve xperia x10mini u20i.. i was installing cynogen mod through xrecovery and i also selected the wipe factory reset option.. now m stucked on the boot screen (sony erricson) nothings working.. plzz help... m dieing for solution..
xperia x10 mini pro u20i
Hello i also have a x10 mini pro.
first rooted it with superoneclick.
then i unlocked the bootloader via cmd. with these programs :s1tool i got via youtube a video and the programs msm7227_setool2 and msm7227_semc.
then copied the cm-11-20140320-NIGHTLY-LegacyXperia-mango to my phone sd card.
and the gapps-kk-20150412-minimal-edition-signed.
after that i installed this cwm : CWMInstaller-Windows-v5. that i got from here:
Links:
Original X10 Mini CWM Thread: http://forum.xda-developers.com/showthread.php?t=1105745
Original X10 Mini Pro CWM Thread: http://forum.xda-developers.com/showthread.php?t=1106146
then i used flashtool at least i tryed to fastboot. but i couldent seem to get my phone in fastboot mode only flashmode.
and i dident see the option reboot into fastboot mode (via abd) but now i do see it.
so i dident flash ore fastboot the x10 mini pro u20i. i just restarted it in cwm and started to delete the davik and factory reset. then i got in mounts and storage and formated all i could format. becouse on a previous phone i had the galaxy s2 i did the same and i could do a clean install on that phone. but on this x10 mini pro after i did all this. i tought instead of installing the roms via cwm. i rebooted the system.
and now its stuck at the sony ericsson name and wont go in cwm. only flashmode works. also i tried xperia companion.
at the pc companion i got this error after entering flashmode and trying to repair it:
Software repair error
An error occurred while repairing your device.
Please try again. If the problem persists, please contact Sony support.
Error code: UEGetPhoneInfoMissingInfo
U20i 0123 1237-9318 R2B 2.1.1.A.0.6
then with the flashtool i tryed to reset it to a official rom witch i downloaded named : U20i_2.1.1.A.0.6_X10 Mini Pro_2.1-upd1-ITA
so i go in flashmode also and got this error :
19/055/2016 16:55:03 - INFO - Flashtool Version 0.9.18.1 built on 08-25-2014 23:00:00
19/055/2016 16:55:03 - INFO - Executing search strategies to find proxy selector
19/055/2016 16:55:03 - INFO - No proxy found for IE. Trying next one
19/055/2016 16:55:03 - INFO - Strategy firefox failed trying next one : No Firefox installation found
19/055/2016 16:55:03 - INFO - No proxy found for java. Trying next one
19/055/2016 16:55:03 - INFO - Syncing devices from github
19/055/2016 16:55:03 - INFO - Scanning devices folder for changes.
19/055/2016 16:55:14 - INFO - Pulling changes from github.
19/055/2016 16:55:15 - INFO - Devices sync finished.
19/055/2016 16:55:19 - INFO - Device connected in flash mode
19/055/2016 16:55:31 - ERROR - root : this bundle is not valid
19/055/2016 16:55:31 - INFO - Selected Bundle for X10miniPro-U20i. FW release : 2.1-upd1. Customization : SE-StockROM-ITA
19/055/2016 16:55:31 - INFO - Preparing files for flashing
19/055/2016 16:55:33 - INFO - Please connect your device into flashmode.
19/055/2016 16:55:34 - INFO - Opening device for R/W
19/055/2016 16:55:34 - INFO - Reading device information
and this is how far it goes. i can leave it all day like this but nothing happends. after trying to flash this rom : U20i_2.1.1.A.0.6_X10 Mini Pro_2.1-upd1-ITA
so all the phone dous now is be stuck in sony ericsson screen.
cant enter cwm.
flashing dousent work.
repairing with offical xperia companion dousent work.
cant enter fastboot mode.
can enter flashmode.
and thats about it....
if anyone have a solution for my problem i would love to hear it! becouse i cant seem to find a way out of this to get my phone back working again!
Cheers!
hey,
i have xperia p with build number 6.1.1.B.1.54 ICS .. and i followed this method http://forum.xda-developers.com/show....php?t=2107775 to root my phone .. after i connected my phone to flashtool and tried to flash a different build number .. it says DEVICE DISCONNECTED .. now the phone won't turn on! i tried to flash another zip with my same old build number .. same thing happened .. what is the prob ?
plz help me ... thnks
now the computer won't recognize the phone !!! and won't boot as well
it gives this error : 01/018/2013 15:18:25 - ERROR - Error in processHeader : 2 : The system cannot find the file specified.
01/018/2013 15:18:25 - ERROR - Error flashing. Aborted
Dear Forum,
I've done somethiung stupid. I rooted mij Experia, no prblem. Installed TWRP recovery, but not the good version. When i came in recovery modus i could not do anything. Perhaps the phone version insteda of the tablet version. After restrat my GoLauncher was disapeared and i run titanium backup to restore lost programs and systemconfiguration. After that my tablet stay in de startscreen. Now i have read all de fora, tried everything i find but nothing works. With de flashtool i canb start the instalattion from a FTFStockRom but it stops with the follow error:
27/008/2014 17:08:21 - INFO - Checking header
27/008/2014 17:08:21 - ERROR - Processing of amss_fs_2.sin finished with errors.[/COLOR]
27/008/2014 17:08:21 - INFO - Ending flash session
27/008/2014 17:08:21 - ERROR - Error in processHeader : Read error :31 : Een apparaat dat op het systeem is aangesloten, werkt niet.
27/008/2014 17:08:21 - ERROR - Error flashing. Aborted
27/008/2014 17:08:21 - INFO - Device connected in flash mode.
Is there someone who has the golden tip for me because i think the tablet is very ill at this moment .
Thanks a lot,
Herman.
hk291053 said:
Dear Forum,
I've done somethiung stupid. I rooted mij Experia, no prblem. Installed TWRP recovery, but not the good version. When i came in recovery modus i could not do anything. Perhaps the phone version insteda of the tablet version. After restrat my GoLauncher was disapeared and i run titanium backup to restore lost programs and systemconfiguration. After that my tablet stay in de startscreen. Now i have read all de fora, tried everything i find but nothing works. With de flashtool i canb start the instalattion from a FTFStockRom but it stops with the follow error:
27/008/2014 17:08:21 - INFO - Checking header
27/008/2014 17:08:21 - ERROR - Processing of amss_fs_2.sin finished with errors.[/COLOR]
27/008/2014 17:08:21 - INFO - Ending flash session
27/008/2014 17:08:21 - ERROR - Error in processHeader : Read error :31 : Een apparaat dat op het systeem is aangesloten, werkt niet.
27/008/2014 17:08:21 - ERROR - Error flashing. Aborted
27/008/2014 17:08:21 - INFO - Device connected in flash mode.
Is there someone who has the golden tip for me because i think the tablet is very ill at this moment .
Thanks a lot,
Herman.
Click to expand...
Click to collapse
Unless somebody else can come up with a better idea, you could try Sony's Emma flash tool to completely re-install the software on your tablet. (It is for tablets & phones)
NOTE
- THIS IS FOR DEVICES WITH UNLOCKED BOOTLOADER
- THIS WILL WIPE ALL YOUR DATA ON INTERNAL SD !
You can find instruction & downloads here
Thanks for your reply. I have tried Emma but Emma couldn't flash because the Tablet is Locked. I tried the sony unstructuions for unlocking, received an unlock code, but if i want to unlock the tablet the instruction in the CMD on my Desktop can't find the device. So i stopped with this option.
Perhaps you have some other options i can try. The easy options you can find in the fora i have already done without succes .
Herman.
hk291053 said:
Thanks for your reply. I have tried Emma but Emma couldn't flash because the Tablet is Locked. I tried the sony unstructuions for unlocking, received an unlock code, but if i want to unlock the tablet the instruction in the CMD on my Desktop can't find the device. So i stopped with this option.
Perhaps you have some other options i can try. The easy options you can find in the fora i have already done without succes .
Herman.
Click to expand...
Click to collapse
redownload stock ROM, it seems that your is corrupted. Also use latest flashtool, as earlier ones won't flash kitkat without errors.
Thanks again for your reply.
I use Flashtool version 0.9.18.1. As i can find this is the latest version. And i have used at least 10 Stock Roms but no one was succesfull.
Do you have an idea which Stock Rom should work for mij Sony Tablet SGP312 with in wordking status versio 4.4.2 on it. I am getting a bit nervous with the idea that my tablet form € 400,= is finished and i never can use it anymore (and i realy love the sony tablet).
In the worse case do you know if there is a last escape to get the tablet started again?
Greetings,
Herman.
hk291053 said:
Thanks again for your reply.
I use Flashtool version 0.9.18.1. As i can find this is the latest version. And i have used at least 10 Stock Roms but no one was succesfull.
Do you have an idea which Stock Rom should work for mij Sony Tablet SGP312 with in wordking status versio 4.4.2 on it. I am getting a bit nervous with the idea that my tablet form € 400,= is finished and i never can use it anymore (and i realy love the sony tablet).
In the worse case do you know if there is a last escape to get the tablet started again?
Greetings,
Herman.
Click to expand...
Click to collapse
try to flash any existing firmware for SGP312 from 4.1.2 to 4.3 and see if it works. Also check for all drivers to be properly installed.
But first of all check your usb cable, i know it sounds strange, but i got all kinds of errors while flashing with one cable, when i changed it, flash process finished successfully.
My Sony SGP312 works again!!
I have done, after yor suggestions, the next things:
Started with the latest version of the flashtool on a Windows XP Desktop;
Installed the drivers via the Flashtool;
Downloaded the custo rom, again via the Flashtool (versio 18);
Started the Flash procedure.
And after 10 minutes the flashprocedure ended succesfully and my Sony styarted again.
I'm so happy it was succesfull and that i can use my Xperia tablet again because i love the sony sgp312 .
Thanks for your help,
Herman.