i have a galaxy tab 10.1 that was having screen problems i found out that it was the lcd flex cable if i wiggle it the screen comes on. So its defiantly that cable and not the hardware my problem is i cant find a replacement anywhere just everything else beside the lcd cable i need!
any help will be greatly appreciated.
there's 3 cables i see on the galaxy tab 10.1 the charging port the digitizer and the lcd
lost896 said:
i have a galaxy tab 10.1 that was having screen problems i found out that it was the lcd flex cable if i wiggle it the screen comes on. So its defiantly that cable and not the hardware my problem is i cant find a replacement anywhere just everything else beside the lcd cable i need!
any help will be greatly appreciated.
there's 3 cables i see on the galaxy tab 10.1 the charging port the digitizer and the lcd
Click to expand...
Click to collapse
Same situation here.
Any luck?
It seems like we found a defect right? three people with the same issue between ten days or so ...
two month ago i have replaced the charging port flex, really annoying....
martocapo said:
Same situation here.
Any luck?
It seems like we found a defect right? three people with the same issue between ten days or so ...
Click to expand...
Click to collapse
Could be a defect.
The cable it self instead on being straight is bent 90 degrees to go up and im assuming the crease finally snapped in the cable
Guys,
Check the follwing thread Link .
I am following up the same issue there.
Regards
martocapo said:
Guys,
Check the follwing thread Link .
I am following up the same issue there.
Regards
Click to expand...
Click to collapse
i have the same problem what should i do? replace the lcd flex cable? also mine is overheating too? does that has to be with the flex to ?
Related
hi
i have a htc touch plus or as they call it htc touch dual.digitizer issue it stoped responding so i bought new one fitted in and still the same problem .i think is a software problem i guess driver software for touch screen .if any one can help please
thanks
Touch Dual digitizer
Hi Saliml2
Not convinced it is a software issue. My digitizer on T-Mobile Touch Plus did the same thing. It stated behaving erratically and then stopped responding altogether. I replaced the digitizer (via eBay) and it work for a few days and then stopped again.
I have read around the internet and have tried several ROM updates etc (currently running a WM 6.5.5 found in other area of this forum) but this has not solved the problem.
It seem to be an alignment issue - i.e. screen alignment is outside the screen area, but there seems to be no way of getting it back. Could be a fault on the phone mainboard (?) but there doesn't seem to be any info around apart from sending it to HTC for repair (not viable as the phone value negates this)
My phone is still not working, I might try opening it up again and reseating the digitizer cable but have done this twice already.
Have you try change the flex cable?
I had one to, with the same problem, and after changing the flex everything was ok...
Good luck!
Hi Amokh Just to clarify, what is the flex cable? The digitizer has a cable already attached to it that plugs in to a zif connector on the mainboard - I assume that this controls the data flow for the digitizer.
Any help would be appreciated.
deepthought2471 said:
Hi Amokh Just to clarify, what is the flex cable? The digitizer has a cable already attached to it that plugs in to a zif connector on the mainboard - I assume that this controls the data flow for the digitizer.
Any help would be appreciated.
Click to expand...
Click to collapse
Maybe this is helpfull http://www.pdacenter.ru/razborka/razbor_htc_touch_dual/
Goodluck
Flex cable, i was mean the cable between the mainboard and the lcd block, you can see it in the previous link, picture 20. Have you try it to change?
hello guys how did you manage to put the digitizer cable in place mine doesn t seem to get in place do i need something to hold the connector in place???
Hey there
So I changed my Xperia Neo's panel as carefuly as I could
I turned it on but the touch screen doesn't seem to be working although the ligh sensor is functioning properly and all the buttons but when I press the screen it doesn't register the touch could I have broken something or might this be some other reparable problem? :crying:
Thank you for your time.
I found the problem - I've cutted the cable of the digitizer :/
I would like to advice unexpirienced people like me to be very careful when replacing parts of their phones, watch for the tiny cables
Regards!
marinovm92 said:
I found the problem - I've cutted the cable of the digitizer :/
I would like to advice unexpirienced people like me to be very careful when replacing parts of their phones, watch for the tiny cables
Regards!
Click to expand...
Click to collapse
ya..dear have to be a very careful...with the hardware section....its too delicate ...:laugh::laugh::laugh:
So it turns out the i717 White Galaxy note I purchased is having issues with charging (Having to move wire and cautiously have to leave it so it will charge). I've already found a video tutorial here ---> http://www.youtube.com/watch?v=pD9R-YUT69Q <--- I'm concerned that if I buy one it will mess up my phone. I normally wouldn't act like this but because of the video's website it actually says there is a flex cable solely for the white version that is different from the black version of the note. That comes to my next dilemma... ---> http://www.durapowerglobal.com/Sams...ort-Flex-Cable-Replacement-REV-10_p_5083.html <--- It's been saying that they are on back order. Im not sure if anyone else has experienced this issue with the same thing and having the white note and all. Any suggestions? Has anyone tried using a flex cable for the white note that was intended for the black note and if yes had you any problems? Thank you for taking time to read this.
I had that same problem on mine when I bought it. I actually had no idea there were different charger flex boards. This is the one I got;
http://item.mobileweb.ebay.com/viewitem?itemId=120983752234
and it worked on my (white) phone up until now. It has to be replaced again. I think the charger flex board is one of those things that's a weak point on the i717.
Hi there,
I am looking for a way to charge my i9100 without using the usb port, as it is broken. I do know some phones have external charging pins hidden under the battery cover - my wife's Nexus S has those. Nonetheless I couldn't find them on my Galaxy S II. Anyone had some experience with this? I do know one can buy and replace the usb port together with the whole bottom circuit board, which would probably fix my problem. But I got the phone for free to use before buying a new one and I did not want to put any money into it
Best Regads
namarath said:
Hi there,
I am looking for a way to charge my i9100 without using the usb port, as it is broken. I do know some phones have external charging pins hidden under the battery cover - my wife's Nexus S has those. Nonetheless I couldn't find them on my Galaxy S II. Anyone had some experience with this? I do know one can buy and replace the usb port together with the whole bottom circuit board, which would probably fix my problem. But I got the phone for free to use before buying a new one and I did not want to put any money into it
Best Regads
Click to expand...
Click to collapse
Hi namarath,
I have the same problem. The usb flex cable I bought to exchange the broken one was broken itself, which is common. As a solution I bought an external battery charger for just 5 Euro on Aliexpress. Works fine since I have two batteries. The indicator light switches from pink to blue when charged. Be warned that this light is bright like disco lights
Cheers
Genmaizen said:
Hi namarath,
I have the same problem. The usb flex cable I bought to exchange the broken one was broken itself, which is common. As a solution I bought an external battery charger for just 5 Euro on Aliexpress. Works fine since I have two batteries. The indicator light switches from pink to blue when charged. Be warned that this light is bright like disco lights
Cheers
Click to expand...
Click to collapse
Buying a broken replacement USB port/board assembly is NOT common......buying the WRONG version of the board IS common....There are 4 different non interchangeable versions.
See this guide that I wrote for explanations.....
http://forum.xda-developers.com/showthread.php?t=2335961
But yes, I agree, an external charger and spare battery is a good option....I have done this for both my S2 and S5......
Sent from my rooted, debloated stocKK kn0x0 SM-G900F
Hi keithross39,
Well, unfortunately in my case everything but loading the battery did work with the new flex cable which indeed had the same version number. So I was one of the few to pick a broken one But thanks for your work in that area!
Cheers
Guys please help. The touchscreen still works on the checkered half when I touch it. I'm just not sure why this is appearing
Link to a picture I took:
https://drive.google.com/file/d/1K092kBzvTuA9ODTBZI060-R5ujtbIYxf/view?usp=drivesdk
none24 said:
Guys please help. The touchscreen still works on the checkered half when I touch it. I'm just not sure why this is appearing
Link to a picture I took:
https://drive.google.com/file/d/1K092kBzvTuA9ODTBZI060-R5ujtbIYxf/view?usp=drivesdk
Click to expand...
Click to collapse
That looks like a hardware issue. It could be a loose ribbon cable to the display. That would require a teardown to check and fix. If your tablet is still under warranty that would be the place to start.
jd1639 said:
That looks like a hardware issue. It could be a loose ribbon cable to the display. That would require a teardown to check and fix. If your tablet is still under warranty that would be the place to start.
Click to expand...
Click to collapse
I was able to open the backside and i reseated the LCD cable that runs to the board connector near the camera, but it still does the same thing.
Could it be possible that the opposite end of the ribbon cable is disconnected? i've never seen an android tablet that has 2 connectors for the display