I love my new DNA, my only gripe is some light leakage problems.
When I'm viewing a dark or black image or anything, the three capacitive buttons leak light onto the screen. Is this a big issue and should I consider exchanging the device?
Same here
Sent from my HTC6435LVW using xda premium
Pretty sure all lcd's that have capacitive buttons will have that. All the devices I have seen or used have it to some extent.
Sent from my ADR6425LVW using Tapatalk 2
No light leakage here... I went into a pitch balck room turned the brightness all the way down and I see no light from the buttons... On an all black screen that is... I did the opposite turned the brightness all the way up and still no light from the buttons
Sent from my HTC6435LVW using xda premium
.torrented said:
No light leakage here... I went into a pitch balck room turned the brightness all the way down and I see no light from the buttons... On an all black screen that is... I did the opposite turned the brightness all the way up and still no light from the buttons
Sent from my HTC6435LVW using xda premium
Click to expand...
Click to collapse
Hmmm, so it appears to be an issue affecting some other users also, so now I decide if its worth it to try and tell the VZW guys... Thank you!
I am in the same boat. Although I am impressed with HTC's response to many of their trademark issues with the release of this device, there is still some light leak at the bottom left corner of the screen on my DNA. I did notice though, the light leak I am seeing on mine is still present when the capacitive back lighting is off. I believe mine is from the actual screens back lighting. These little issues do bug the sh*t out of me, but it is much improved from their previous models. Contemplating trading up to see if I can luck out and get a better model...
Related
Anyone else's have really bad light leakage at the bottom??
Sent from my PG86100 using XDA App
keeperskeep said:
Anyone else's have really bad light leakage at the bottom??
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Seems so.
http://forum.xda-developers.com/showthread.php?t=1138266
keeperskeep said:
Anyone else's have really bad light leakage at the bottom??
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
can you post a pic please?
my first one did took it back. second one is decent.
Between light leakage and dead pixels I would say there are a few with cosmetic issues out there. I had to take my first phone back in for an exchange because it had a dead pixel in the right hand corner and also had dust underneath the camera lens. Looked over my replacement in the store and checked for dead pixels with the Dead Pixel Test app and it was fine. Failed to notice this eye sore near my search button. When capacitive buttons are lit up this thing is hard not to notice. Called Customer Service and they are supposed to call me tomorrow to let me know about yet another exchange...
I have some too. It's nothing to care about tho, my buttons and 2D-3D switch are solid unlike some who are having over sensitivity issues. If I am anal about my phone id be spending too much time with sprint customer service and less time enjoying a great device. If i complained I'd probably get a phone with other issues. I have warranty and insurance, if something REALLY goes wrong, ill just get a replacement. My real goal is not to drop this baby
In your picture, the white "dot" near your search button...is that where the light sensor is on your hardware? Mine is located just above and to the left of my "back" button...that would be weird if it was actually in two different locations. Or is it just a reflection from somewhere?
...just to be clear, I am referring to the first picture that was posted.
Antagonistt said:
In your picture, the white "dot" near your search button...is that where the light sensor is on your hardware? Mine is located just above and to the left of my "back" button...that would be weird if it was actually in two different locations. Or is it just a reflection from somewhere?
...just to be clear, I am referring to the first picture that was posted.
Click to expand...
Click to collapse
Light sensor is always located on the top of the device.
On the 3vo its to the right of the HTC logo on top of your phone
From working in a plastic injection molding company it looks as if the white glowing spec is where it wasn't fully painted or molded (aka short shot) before the layer of glass was placed over it... Causing a leak of light
All speculation don't qoute me on it
Sent from my PG86100 using XDA App
itsallsubliminal said:
I have some too. It's nothing to care about tho, my buttons and 2D-3D switch are solid unlike some who are having over sensitivity issues. If I am anal about my phone id be spending too much time with sprint customer service and less time enjoying a great device. If i complained I'd probably get a phone with other issues. I have warranty and insurance, if something REALLY goes wrong, ill just get a replacement. My real goal is not to drop this baby
Click to expand...
Click to collapse
what HW version do you have? I have some small light leakage at the bottom too BUT i think the big thing different from the evo4g screens is that the screens are very tight, when you try to push them down they dont budge. With the 4G you could pinch the screen and the light leakage would go away some. With the 3d thats not the case.
Now as far as your 2d/3d button. how is it play wise front to back? mine wiggles a bit front to back but is very solid top to bottom(direction to switch to 2d-3d).
Guys,
Use screen filter from the marker. Set transparency to 100% it won't filter anything but will dim the capacative buttons to almost off. Just a band aid for now but it will help.
No light leakage here, but I headache a case that would hide out I'd there was, so for right now I'm not worried.
sent from my Shooter.
dteze88 said:
Guys,
Use screen filter from the marker. Set transparency to 100% it won't filter anything but will dim the capacative buttons to almost off. Just a band aid for now but it will help.
Click to expand...
Click to collapse
This is a good idea except my search button doesn't turn off lol
Mine is very small but still sucks knowing Is there.
itsallsubliminal said:
I have some too. It's nothing to care about tho, my buttons and 2D-3D switch are solid unlike some who are having over sensitivity issues. If I am anal about my phone id be spending too much time with sprint customer service and less time enjoying a great device. If i complained I'd probably get a phone with other issues. I have warranty and insurance, if something REALLY goes wrong, ill just get a replacement. My real goal is not to drop this baby
Click to expand...
Click to collapse
That is exactly what mine looks like. I'm using that screen filter app and trying to forget that it's there for now. I'll make a switch if anything near the end of the 30 days. What I'm really trying to get used to after my nova screen EvO4G is the yellowish hue over everything. Seems like an Epson panel all over again
HTC just needs to dim those capacative Buttons down. No reason for it to be that bright. So annoying useing it at night/ in the dark.
That would be awesome if someone could write an app to control the light of the capacitive buttons. I mean if screen filter can shut them on/off....
i got a little bit, and although id rather it not be there, i really dont mind it at all...
reason is, that unlike the one the OG EVO had which looked like a mess because its random spots where it leaks where it looks ugly, but on the E3D it looks like a slight (very very slight) glowing ring around the bottom which doesnt look that bad IMO
It's not light bleed LOL those are so bright its a reflection . So don't worry not light leaking .
reaper24 said:
It's not light bleed LOL those are so bright its a reflection . So don't worry not light leaking .
Click to expand...
Click to collapse
LoL I'm about to email the dev of screen filter to see if he can add control of the capacitive buttons.
Speaking of light leakage is anyone else's 2d/3d button kind of wobbly?
Sent from my PG86100 using XDA Premium App
Just wondering if anyone else has noticed this on their RAZR. While in landscape mode (I first noticed this while watching Netflix). In the corner near the search capacitive button I noticed the lighting for the capacitive button seeps out a little, like a very small amount. It doesn't overwhelm the screen or anything. When holding my phone upright and looking down towards the capacitive buttons, I do notice some light coming out from the left and right corners. Just wondering if this is because of the design and is normal? Or is it a flaw in the phone? Thanks!
I have noticed this as well on my unit. I have also noticed black blotches on the screen that can be seen when the screen is completely black.
Sent from my DROID BIONIC using XDA App
Not evident on mine.
Sent from my DROID RAZR using xda premium
garywojdan81 said:
Not evident on mine.
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
Hmm. It is somewhat hard to notice, I'm still wondering if it is a design thing or flaw.
I have exchanged my Razr and there is still light bleeding from the capacitive button (search). Also the black blotches remain when the screen is black and the backlight is on.
KENMAN OH YEAH said:
I have exchanged my Razr and there is still light bleeding from the capacitive button (search). Also the black blotches remain when the screen is black and the backlight is on.
Click to expand...
Click to collapse
Thanks for confirming this.
droid razr
My screen also has the blotches when the screen is black and in low light conditions.my capacitive buttons also bleed into the screen in the corner but its not something i notice only when i really scrutinise the device.
I have a small streak or two of the blotches but they're only noticeable during the black boot up screen, not when using Netflix or YouTube.
There's absolutely no leaking from the white light of buttons though..
I also have the black bloches, it's like the screen isn't AMOLED; the black's aren't completely black, i compared it to the Galaxy S 2 and on the Galaxy you can hardly see where the edge of the screen is because it is completely black but on the RAZR it's as if the screen is more greenish where the Galaxy would be completely black.
The black's look better on the first Galaxy S than they do on the RAZR
I first noticed when i started using NOLED, i like it better than the led notification light on the RAZR
In any case, quite dissapointing
BTW i don't have light bleeding from the capacative buttons
Hmm. So some units have it and some don't? I do confirm the black blotches when watching netflix and the screen goes black you notice it. The light bleeding i noticed while watching a full HD movie and I was like eh.. What's this tiny flash moving in the corner. That's when I noticed the light bleed, and it occurs only when the capacative buttons are on. Another member stated that he exchanged his RAZR and his replacement one has the same issue as well. I've looked around and it seems other devices also have this issue as well. Not sure if it's just a design flaw or defect.
@Dusanzk you might actually have a defective unit if that's the case, cause some people were complaining about a green tint on the phone. My blacks and black, why whites are white, I have no problem with colors at all. Just that bleeding ;(.
It's quite hard to notice at first, i only notice in the dark and when the screen is completely black.
I downloaded an app called Burn In Tester, you can adjust the colours on your screen to see what they look like and when i choose black that's when i notice it.
Regarding the green tint, i'm not sure that's the problem i'm having because it's only a problem when something black is showing on screen and it's dark, in all other situations the screen looks amazing, like my Galaxy S 2
Is anyone else noticing uneven backlighting on their note? I can see it when the background is white. It seems like there is an area that is darker.
backtothemac said:
Is anyone else noticing uneven backlighting on their note? I can see it when the background is white. It seems like there is an area that is darker.
Click to expand...
Click to collapse
SuperAmoled screen does not use backlighting. If you think it is a flaw, you can exchange it from att.
Sent from my SCH-I500 using XDA App
Can't see it and I don't think SAMOLED uses backlighting.
Sent from my SAMSUNG-SGH-I717 using XDA App
I exchanged it today. The new one is so much better.
Glad you were able to get a new one.
My entire panel is even, no light bleed, no unusual banding, dead pixels etc. Very happy w/ mine
I can see a row of lights - looks like LEDs - emanating from the bottom of my screen. They're underneath the buttons. Almost like a row of tiny flashlights.
Are these the button's LED backlights? Is this expected or defective? Definitely didn't see anything like them on my last phone.
you mean the capacitive buttons lighting up? thats totally normal. in fact, in the past the backlights use to spill into the LCD but they fixed it with the LTEvo. the only thing is that since the display is so brilliant, the buttons almost look blue but thats normal too
ImaWinRAR said:
you mean the capacitive buttons lighting up? thats totally normal. in fact, in the past the backlights use to spill into the LCD but they fixed it with the LTEvo. the only thing is that since the display is so brilliant, the buttons almost look blue but thats normal too
Click to expand...
Click to collapse
No I believe hes talking about the light leakage from between the bottom of the LCD panel and where the black starts above the buttons. The OG Evo and Thunderbolt also suffered from this, the 2 EVO 4G LTEs I've seen ironically still suffer the same problem. Only really noticeable when you see it and then you just know its there.
Yes definitely light bleed, spilling onto the bottom of the screen. Normal?
when i go into setting and backout
all my app keep reloading(widgets) on home screen
is anyone having this issue?
kenpen said:
when i go into setting and backout
all my app keep reloading(widgets) on home screen
is anyone having this issue?
Click to expand...
Click to collapse
Sent from my EVO 4G LTE using xda premium
Found other similar posts in Q&A. I have to cover the light sensor or be in pitch black to get the buttons to light up. Anyone else? One guy already swapped for a new phone but same problem.
Yep its pretty much hit and miss with this phone. I had to exchange my first one for a different issue, but the capacitive buttons on both don't light up unless in really low light. Personally I like this as I would turn button backlights off with CM based Roms on other phones. I know where the buttons are, don't need them to light up.
Sent from my Nexus 7 using Tapatalk 2
I was wondering the same thing. Mine only light up in very low light or dark. Unless there is a control for it, it is a bug
Sent from my HTC6435LVW using xda premium
I'm not so sure it is a bug. It seems equally possible that they only turn on in extremely low light by design. HTC might assume (and rightfully) that you know where the buttons are after a while and don't need them illuminated unless it is dark enough to not see the phone very well or at all.
Personally, I'm glad they don't light up a lot. I know where they are, I can see them fine in low light and I don't like when capacitive buttons are always shinning at me when I don't need them.
Sent from my HTC6435LVW
I think it is a battery saving feature. Why would you need them on in the light anyway. They are not invisible like on the note 2.
Sent from my HTC6435LVW using xda premium
rupret27 said:
I think it is a battery saving feature. Why would you need them on in the light anyway. They are not invisible like on the note 2.
Sent from my HTC6435LVW using xda premium
Click to expand...
Click to collapse
I agree but I have still wondered about it. Sometimes mine won't light up at all in dark. But not bothering enough to take it back lol
Sent from my HTC6435LVW using xda app-developers app
mgladden2 said:
Found other similar posts in Q&A. I have to cover the light sensor or be in pitch black to get the buttons to light up. Anyone else? One guy already swapped for a new phone but same problem.
Click to expand...
Click to collapse
I've got the same problem. The phone has a problem. I installed AndroSensor on the dna and my razr. The dna consistently gives me false readings. If there's any light at all it gives a 200 lux reading. If you are in total darkness it will reset. That's why your work around works. The phone has a light sensor that, either by design or defect, doesn't differentiate light levels between 2 to 200 lux. It defaults to the higher figure and the cpu apparently uses this figure to shut the lights down.
Personally, I find this to be a little too convoluted to be an energy saving design. I believe it's a bug that a future update will deal with.
Same here. Also.........they arent bright enough!! Lol we need a mod for this. Ill get right on it.
RATTLED FROM MY ONE XL USING ICS TAPATALK 2
Mine light up all the time no matter how dark or light it is. They always seem to work on my end.
WilliamStern said:
Mine light up all the time no matter how dark or light it is. They always seem to work on my end.
Click to expand...
Click to collapse
Well mine work, just has to b pretty dark. Btw, theres an app in the one xl forums to dim, or turn off completely that works for our DNA. Ill link u guys to it.
RATTLED FROM MY ONE XL USING ICS TAPATALK 2
Anyone who consistently uses the phone in a dimly lit room will want it fixed. I watch movies with a single low-watt lamp on, and I like to use the phone periodically. Having the lights off means that every third button press doesn't land exactly on the capacitive part. If I force the lights on by covering the sensor, I never miss. There's very little play on the sensor area, so you either land perfectly or not at all. Definitely looking forward to a fix. I just hope it's not a hardware glitch that can't detect 2 to 200 lux.