Related
ok nvflashed, everything went well and successfull, then i get the boot loop. I read on the stickey that the way to fix this is to enter cw and repartition the sdcard, but when i try to get in (by holding power and volume) it just goes to a black screen with a white triange and "!" .....please help?
I would guess you need to install cwm again using an SD card as thenvflash cleared it out.
ok, sweet, how do i go about that? sorry still a little bit of a newb on this kind of stuff
vballrkc said:
ok, sweet, how do i go about that? sorry still a little bit of a newb on this kind of stuff
Click to expand...
Click to collapse
there is a guide in the Dev section for ClockworkMod.... check there. Or search for ClockworkMod or CWM in the gTablet forum...
http://forum.xda-developers.com/showthread.php?t=865245
When i was trying to boot into recovery mode it failed and it gave a superuser error. At this moment i had leedroid rom evo 3d gsm that is s-off. When i still had stock rom i never had this error but it seems like it was there all the time with the leedroid rom. Well so i was trying to boot into recovery. Tried it with power button and volume down button at same time, but this was failing. So i did it with rom manager. I used rom manager before when i installed leedroids rom. But now it didnt boot into recovery. I tried installing superuser again but it didnt seem to make any difference. with rootchecker i checked if i had root acces but it seemed i lost root acces :S. after retrying a couple of times my phone didnt boot back to the leedroid rom. I was trying a lot of things, with and without sd and sim. After about 20 reboots i tried power and volume down to go to bootloader and know it loaded. At bootloader start it loads some things and i saw no image blalbla dont really know what it meant. I tried to go to recovery but it wont boot, i get a white screen with htc and wont load anything. I tried all other options in bootloader too, to check if anything works but even a factory reset failed.
For me it looked like somehow my rom is f*cked and now i cant go to recovery mode somehow. I have rom on my sd so if i could go to recovery i could still flash. Does anyone know how i still might get to recovery mode or is there another way to still flash another rom. Maybe there are some people who can tell me more about leedroids rom, are there more people who got trouble with root acces?
anyone who might be able to help plz let me know, im so frustrated right now because i cant use my phone, i even need to think about a way to wake me up this morning because i always used my phone for alarm
That is a very easy to fix problem. First, download Clockworkmod recovery for your device (evo 3D GSM) or another recovery.
CWM 5.2.0 Shooteru: http://www.mediafire.com/?5kdr0c7xux2c64p
After download/finding the recovery, rename it to PG86DIAG. (or whatever it tries to scan for in bootloader. If its 2 things, it is the bottom one)
Place the file on your SD card somehow. (in your case you would need to take out the SD card and put it in another phone/adapter)
Boot into bootloader with volume down + power and it should scan for the file. When it asks if you want to do the update, press yes. After the recovery is installed, press power to reboot.
Do a battery pull while you are on the splash screen. Reboot back into bootloader with vol down + power and click on recovery. Wipe everything and flash the rom again. Reboot and you should be able to load the ROM with root and everything.
thx, im so happy to here your solution. Know lets search for my sd adapter, i know its somewhere . I will let you know later if it has worked
stonyhawk said:
thx, im so happy to here your solution. Know lets search for my sd adapter, i know its somewhere . I will let you know later if it has worked
Click to expand...
Click to collapse
You're welcome! I'll be watching the thread.
Oke i did what you said but when i boot into bootloader nothing has changed. It doesnt ask if i want to update anything. And if i go to recovery and try to boot it keeps hanging at the white screen with htc
btw, you said this:after download/finding the recovery, rename it to PG86DIAG. (or whatever it tries to scan for in bootloader.
Do you mean it might be other name i have to make it? How do i know this?
stonyhawk said:
Oke i did what you said but when i boot into bootloader nothing has changed. It doesnt ask if i want to update anything. And if i go to recovery and try to boot it keeps hanging at the white screen with htc
btw, you said this:after download/finding the recovery, rename it to PG86DIAG. (or whatever it tries to scan for in bootloader.
Do you mean it might be other name i have to make it? How do i know this?
Click to expand...
Click to collapse
It is probably a different name.
When you boot into bootloader, it scans for 2 files and says not found, right?
The second file it scans for is the one you want to rename it to.
hmke, ye it scans for files but its going fast so cant see it very well. I see about 5 things get scanned
oke first thing it scanned is called PG86DIAG.zip, 2nd is PG86DIAG.nbh, 3th is PG86IMG.zip, 4th is PG86IMG.nbh, 5th is PG86IMG.tar, 6th is PG86IMG.aes, 7th is PG86IMG.enc
All this things are scanned and then it says no image
From what I can read if you lost root then you are s-on on the bootloader right? if so installing recovery through bootloader wont work... check if you have S-on or S-off on bootloader if you have s-on you will need to use a official update to restore your phone...
stonyhawk said:
hmke, ye it scans for files but its going fast so cant see it very well. I see about 5 things get scanned
oke first thing it scanned is called PG86DIAG.zip, 2nd is PG86DIAG.nbh, 3th is PG86IMG.zip, 4th is PG86IMG.nbh, 5th is PG86IMG.tar, 6th is PG86IMG.aes, 7th is PG86IMG.enc
All this things are scanned and then it says no image
Click to expand...
Click to collapse
Do PG86IMG. Also, if it says S-On at the top of the bootloader, you will need to get S-Off with revolutionary again.
1107963 said:
From what I can read if you lost root then you are s-on on the bootloader right? if so installing recovery through bootloader wont work... check if you have S-on or S-off on bootloader if you have s-on you will need to use a official update to restore your phone...
Click to expand...
Click to collapse
No im still s-off, but when my phone was less ****ed as it is now and i could still boot normaly, i already had some strange things with leedroid rom. superuser never seems to be working well. i couldnt give root acces, it gave an error when i try. even through root chekker it says no root, but i thought that might have something to do with superuser.
stonyhawk said:
No im still s-off, but when my phone was less ****ed as it is now and i could still boot normaly, i already had some strange things with leedroid rom. superuser never seems to be working well. i couldnt give root acces, it gave an error when i try. even through root chekker it says no root, but i thought that might have something to do with superuser.
Click to expand...
Click to collapse
Instead of renaming to PG86DIAG, rename to PG86IMG and see if that works.
yousefak said:
Do PG86IMG. Also, if it says S-On at the top of the bootloader, you will need to get S-Off with revolutionary again.
Click to expand...
Click to collapse
do you mean name the file PG86IMG and not PG86DIAG?
lol your answer came faster
Oke still no difference, but it is chekking for a .zip file right? Im not sure if its .zip right now, is this the reason why its failing?
Ummmmm I dont see any other choice but this... you can follow this tutorial to get your phone working...
Code:
http://forum.xda-developers.com/showthread.php?t=1262457
You are going to need to revert back to stock
I had the same problem a month back and was able to fix it.
Also don't worry if you can still get to the boot loader its fixable.
stonyhawk said:
do you mean name the file PG86IMG and not PG86DIAG?
lol your answer came faster
Oke still no difference, but it is chekking for a .zip file right? Im not sure if its .zip right now, is this the reason why its failing?
Click to expand...
Click to collapse
So it acts as if there is no .zip at all? Like it says "No image found"?
Double check if its a zip and the file is named properly. If it doesn't recognize it, there is a problem with your SD card/bootloader.
Oke when i put the .zip in a clockworkmod folder it didnt see it but now it shows parsing behind the PG86DIAG.zip and the PG86DIAG.img says no image or wrong image. All other thing still say no image
I tried the .zip you uploaded and now it could load the image , trying to flash now
stonyhawk said:
Oke when i put the .zip in a clockworkmod folder it didnt see it but now it shows parsing behind the PG86DIAG.zip and the PG86DIAG.img says no image or wrong image. All other thing still say no image
Click to expand...
Click to collapse
I see what you're doing wrong. Don't put the zip in a clockworckmod folder. Put it on the root of your sd card.
(just directly on the sd card)
yousefak said:
I see what you're doing wrong. Don't put the zip in a clockworckmod folder. Put it on the root of your sd card.
(just directly on the sd card)
Click to expand...
Click to collapse
Good catch on that one.
If you don't put it directly on the root of your sd card then the boot loader will not be able to find the zip and flash it.
Oke thx, i finally booted into recovery . I first had to delete the .zip again because it was trying to update again when i didnt. Im so happy now , couldnt done this without your help so i will push the thx button few times^^
stonyhawk said:
Oke thx, i finally booted into recovery . I first had to delete the .zip again because it was trying to update again when i didnt. Im so happy now , couldnt done this without your help so i will push the thx button few times^^
Click to expand...
Click to collapse
You're welcome!
Also, one thank is enough
Dear all,
Here is the situation. I decided to root my evo 3d gsm (hboot 1.5++) today, and all went well until I flashed a rom (virtuous). Now whenever I boot on the phone, it shows me this "V" logo and loads for more than 10minutes or so. I can go into my bootloader, but when I attempt to do anything from my clockworkmod recovery, when I press the power button to select different options, I get blank menus and I can attempt nothing. I am an unexperienced user, and can anyone out there who is experience render some assistance? I am at my wits end...
Thanks
Well I'm not too familier with the gsm version... the "V", is that part of the boot animation? and does it just loop over and over? maybe try reflashing clockworkmod and re wipe and install?
netwokz said:
Well I'm not too familier with the gsm version... the "V", is that part of the boot animation? and does it just loop over and over? maybe try reflashing clockworkmod and re wipe and install?
Click to expand...
Click to collapse
The "V" is the part of the boot animation. And the "V" just glows again and again, yeah so i guess it loops. Why I am so worried is because I saw a window of my HTC sense booting to life earlier on, but I saw the words "Unfortunately... has... crashed..." but it was very brief, and after which the animation began again. Is it because I waited for too short a period of time? (around 15 minutes or so) or because it really boot looped? And how do I reflash clockwordmod when I can't access my phone and sd card? Will appreciate your kind help...
I've never had to wait more than 5 minutes for something too boot, and it should really never take longer than that. Can you tell me the steps you took to flash the rom(not to root it). and could you give some more info about your phone? are you s-on or s-off? And what do you mean by blank menus in clockwork mod? Do you know how to boot into your hboot menu? from there you can boot to fastboot and install the recovery from your pc. connect your phone to the pc while in fastboot mode and get your recovery.img file and type the following command from the command line:
Code:
fastboot flash recovery /path/to/<recovery>.img
netwokz said:
I've never had to wait more than 5 minutes for something too boot, and it should really never take longer than that. Can you tell me the steps you took to flash the rom(not to root it). and could you give some more info about your phone? are you s-on or s-off? And what do you mean by blank menus in clockwork mod? Do you know how to boot into your hboot menu? from there you can boot to fastboot and install the recovery from your pc. connect your phone to the pc while in fastboot mode and get your recovery.img file and type the following command from the command line:
Code:
fastboot flash recovery /path/to/<recovery>.img
Click to expand...
Click to collapse
Ok, here is the infomation. I live in Singapore, which is a part of Southeast Asia, my phone is the GSM version with HBoot 1.530007(i cant remember the decimal placing).
I firstly used HTCDEV to unlock my bootloader, which went well, then I went to evohacks to get the conventional rooting method, which went well too. And it all came when I was careless, and I accidentally forgot to wipe the data and cache of my evo before i flashed the rom. And now it gets stuck in the "V" logo loading phase. If the hboot menu is the menu where I have to press the powerbutton and the volume down button then yes. I can also get into my recovery, but the problem is that it shows a blank menu in (clockwordmod specifically), thus rendering whatever me helpless. i have downloaded the PG86IMG.zip and Im waiting for it to finish. So how do I go about solving this matter? This phone is my only asset and I really want to save it...
Blank menu as in for example when I click "Reboot", or "Factory Reset" or perhaps "Restore" in the CWD Recovery, it just shows me a blank menu with the CWD logo in the background, with no options or drop down words or whatsoever. And the sad thing is that I did not make any recoveries at all.... So I plucked my sd card out, and now im waiting to finish downloading the PG86IMG.zip to put on my sd and into my phone, and flash it to revert it back to stock and stuff..... I hope this works
Ok, well as long as you can get to either hboot or recovery you'll be ok. I would recommend flashing 4ext recovery, as it has never failed me and seems to help others. here is the link to it. Download that and pull the recovery.img out and flash that from your pc with the command I gave above. It sounds like you are either pushing the wrong button in the recovery or it might just be messing up for some reason. Is it the touchscreen version of clockworkmod?
netwokz said:
Ok, well as long as you can get to either hboot or recovery you'll be ok. I would recommend flashing 4ext recovery, as it has never failed me and seems to help others. here is the link to it. Download that and pull the recovery.img out and flash that from your pc with the command I gave above. It sounds like you are either pushing the wrong button in the recovery or it might just be messing up for some reason. Is it the touchscreen version of clockworkmod?
Click to expand...
Click to collapse
The recovery is the free version, so it shouldn't be the touch one. May I ask, what do you mean by recovery.img? I emptied my SD card so that I can put the PG86IMG.zip into it later. Any more specific steps you can give? Sorry but Im really a newb in the android world
mrkittyhawk said:
The recovery is the free version, so it shouldn't be the touch one. May I ask, what do you mean by recovery.img? I emptied my SD card so that I can put the PG86IMG.zip into it later. Any more specific steps you can give? Sorry but Im really a newb in the android world
Click to expand...
Click to collapse
The recovery.img is the image that the phone flashes to install the recovery. If you look in the zip I posted in the link you'll see that file in there. the one I posted is the 4ext touch recovery. you can manually flash that file to your phone in case you can't get it to boot(like your case). I would suggest trying the 4ext recovery I linked, or maybe try to boot to recovery again and see if its touch based. Were the menus working when you flashed the virtuous rom, and then it stopped working?
OH stupid me. Whoops. Actually I CAN navigate. Ive been pressing the wrong button all this while. I pressed the power instead of the camera, which is the select button. Whoops. seems like CMD was working after all. sorry...
ok but still, can I just attempt to install the RUU file I downloaded in the CWD menu? Will it work? Will my phone be reverted back to its original unrooted state? I saw someone say it could...
There is something bugging me though. My SD card is now completely empty. Will it have any negative effects on what i do?
I thought something like that was happening, glad you got it sorted. Try to wipe everything and reinstall your virtious rom again first. yes the PG86IMG.zip will return you back to complete stock, recovery and all. So if you do that you might have to re-root all over again.
mrkittyhawk said:
There is something bugging me though. My SD card is now completely empty. Will it have any negative effects on what i do?
Click to expand...
Click to collapse
no it won't.
thank you so much! So since now everything is clean, you recommend another shot at the virtous? I just drag it and put it in my sd card right? Neat! Will go try, if i encounter another problem will come back here. Thanks a lot! It really means a lot to me!
mrkittyhawk said:
thank you so much! So since now everything is clean, you recommend another shot at the virtous? I just drag it and put it in my sd card right? Neat! Will go try, if i encounter another problem will come back here. Thanks a lot! It really means a lot to me!
Click to expand...
Click to collapse
I would recommend trying it before you go back to stock just to re-do it all, but its up to you. yeah if you need more help just come here or pm me. glad you got it working again!
Thank You!
Oh ok! I thought by clearing the data using recovery on the phone and sd will render the root useless. Will try redoing it again. Will update you on the further details
Many thanks!
mrkittyhawk said:
Oh ok! I thought by clearing the data using recovery on the phone and sd will render the root useless. Will try redoing it again. Will update you on the further details
Many thanks!
Click to expand...
Click to collapse
If you only wipe /data/ you will still have root. sdcard doesn't matter.
mrkittyhawk said:
Oh ok! I thought by clearing the data using recovery on the phone and sd will render the root useless. Will try redoing it again. Will update you on the further details
Many thanks!
Click to expand...
Click to collapse
So theoretically flashing the ROM shouldn't take more than... around 15 minutes?
correct
Its now 10 minutes and so far my phone had made 2 major vibrations. So if this doesn't work, can i just wipe all the data again, put the PG86IMG.zip in my phone, go to recovery to install it, and then I just press reboot right?
mrkittyhawk said:
Its now 10 minutes and so far my phone had made 2 major vibrations. So if this doesn't work, can i just wipe all the data again, put the PG86IMG.zip in my phone, go to recovery to install it, and then I just press reboot right?
Click to expand...
Click to collapse
Sometimes sense roms can take a bit, but if its vibrating than it should be working. if not just put the PG86IMG.zip on the root of your sdcard and boot into hboot and let it do its thing. no need to wipe data for that.
After downloading this rom and thinking everything would be just fine when moving to CM7 on my brother's rooted Photon, I come to a boot loop! I tried to use RSDLite to flash a SBF over to the phone, it fails, I try to use Android' Recovery to flash a new rom, fails, and then I try to factory reset and wipe the phone, FAILS! I have no clue what to do here.
I am so used to my Sensation 4G and everything is so much simpler on it, but I have no clue what I am doing with this Photon. Can someone please point me in the right direction of what I need to do? I need some real answers! I've tried tons of guides here on the forums but nothing seems to work!
Normally I could use CWM to fix it all up, but I never could find it for this phone!
Help!
bump. Please, need help.
ClipTy said:
After downloading this rom and thinking everything would be just fine when moving to CM7 on my brother's rooted Photon, I come to a boot loop! I tried to use RSDLite to flash a SBF over to the phone, it fails, I try to use Android' Recovery to flash a new rom, fails, and then I try to factory reset and wipe the phone, FAILS! I have no clue what to do here.
I am so used to my Sensation 4G and everything is so much simpler on it, but I have no clue what I am doing with this Photon. Can someone please point me in the right direction of what I need to do? I need some real answers! I've tried tons of guides here on the forums but nothing seems to work!
Normally I could use CWM to fix it all up, but I never could find it for this phone!
Help!
Click to expand...
Click to collapse
if you dont have cwm installed, i assume that you flashed that rom while in bootstrap recovery because you didnt state that the phones bootloader was unlocked.That particular rom is an unlocked only rom, which is why you're stuck in that loop. If I'm right and you flashed that rom via bootstrap, you should be able to get back into it by powering down the phone, holding power and volume down, then using the volume down key to cycle through the options until you hit 'android recovery', then press volume up to boot into it.
At that point, go to mounts and storage, mount usb storage while phone is plugged into your pc, and place this rom:
http://forum.xda-developers.com/showthread.php?t=1648297
On your sd card. After this, go back into mounts and storage and wipe data, system, and cache. Flash the rom you just placed onto your sd card and reboot.
Again, this is all asuming you installed bootstrap recovery, if I'm wrong let me know and ill try to help you further.
I forgot to add, you're also going to need to download a stock blur kernel and place that on your sd card aswell, flashing it after you flash the rom. I can't remember where to find the stock blur kernel but give me a second and ill try to find it for ya.
I don't find that very professional. I think the best you can do is tell me which section it belongs in. At least Acvice offered help...
Thanks you so much! I knew I would have to flash the stock stuff, but I just couldn't find it! Yes, I used bootstrap as I thought it was the only means of getting into cwm. I wont be screwing around after this. Only problem is, the phone is dead! I need to charge it again lol. Thanks for helping. Ill let you know the outcome later.
Acvice said:
*snip*
Click to expand...
Click to collapse
So I am downloading that rom you gave me, seems like a good one, now I am just waiting on the Kernel, have you found it yet? Oh, and I couldn't mount my phone through recovery, so I just took the SD card out and did it myself.
EDIT: I tried to install the rom, I got an E: signature verification failed and the installation aborted. I've also tried this with other roms before. What is making this happen?
ClipTy said:
So I am downloading that rom you gave me, seems like a good one, now I am just waiting on the Kernel, have you found it yet? Oh, and I couldn't mount my phone through recovery, so I just took the SD card out and did it myself.
EDIT: I tried to install the rom, I got an E: signature verification failed and the installation aborted. I've also tried this with other roms before. What is making this happen?
Click to expand...
Click to collapse
Meh, you just flashed something you shouldnt have is all. It honestly happens to all of us. You learn the most by screwing up your phone haha.. Figured i would have you try that method as it would have gotten you a nice fast rom and also fixed your problem. But it looks like youre just unlucky. Were just gonna have to get ya back on stock by flashing an SBF.
1) Download the Windows Moto drivers and install them. Make sure you choose 32bit or 64bit, respectively. (quick google search)
2) Download RSD Lite (quick google search)
3) Download the SBF located here and unzip it.
Use this video to guide you through. Some of his links are outdated which is why i linked the one above. If you are used to ODIN on Samsung devices, you'll probably already know what to do as it's the same kind of program. Good luck. Let me know how it goes.
I've tried RSDLite with an Sbf before, it never succeeded.
Sent from my HTC Sensation using xda app-developers app
Is it possible to flash an sbf with a low battery? If not, how can I charge this thing?
Yo.
So nothing whatsoever seems to be able to make this phone boot into recovery. Whether its a soft or hard boot, it just will not happen. It will always boot as normal. I'm so frustrated and completely stumped.
Any ideas?
James Bartlett said:
Yo.
So nothing whatsoever seems to be able to make this phone boot into recovery. Whether its a soft or hard boot, it just will not happen. It will always boot as normal. I'm so frustrated and completely stumped.
Any ideas?
Click to expand...
Click to collapse
How did you install recovery?
How are you trying to boot into recovery?
blueether said:
How did you install recovery?
How are you trying to boot into recovery?
Click to expand...
Click to collapse
Ah man, you've got me. This is all in the hope of installing a custom rom. Installing the recovery was one of a few things I hadn't done before. I think I did it using Fastboot. I've got a head like a sieve. More frustratingly, my own PC died a death a few days ago, so A) I haven't got whatever stuff I downloaded so cant refer to that to see what I did, and B) anything from here on would ideally be done without a computer, although I could probably borrow one if needed. Can you use Fastboot to install a custom recovery? If so, then thats how I did it. I remember downloading a .img file on the PC and doing something from there. Sorry I couldn't be more clear, and thanks for your help buddy.
Sorry, I missed the second question there. I have tried a number of ways to boot into recovery. Holding vol-up or vol-down while powering on, or a handful of apps that have a boot into recovery option. I've tried using CWM's Rom Manager to install the PA rom .img I have saved on the phone, but that is telling me I need to install CW recovery, and then says its not available for my device. Confused as hell about that one. I feel that once I'm in recovery I'm golden. I don't know if this is relevant, but at the minute, I don't have write access to /system, so I guess this would be a half root job.
You still having issues? I can help and yes you will need a computer and you will need to download the android SDK and set that up.. Let me know