after successfully installing TheBrainsROM FXP mod, i tried to restore the data from my backup. now im having errors like setup wizard has stopped, google+ stopped. i already tried wiping cache/dalvik cache. any help?
Help
donatdodat said:
after successfully installing TheBrainsROM FXP mod, i tried to restore the data from my backup. now im having errors like setup wizard has stopped, google+ stopped. i already tried wiping cache/dalvik cache. any help?
Click to expand...
Click to collapse
I dont have cm recovery also as its new, i am stuck @ setup wizard has stopped help!!
woah9=
Related
I have flashed cm7 and it worked successully, the stable version, minus that the google play store was getting a server error. Anyway im trying to upgrade to cm9, i flashed boot.img and in cwm i flashed cm9, and gapps. But when it starts and android upgrades etc i am stuck at "unfortunately setup wizard has stopped working"" any help? i dunno what to do
Did you make factory reset? Wiped dalvik cache?
Sent from my Xperia Arc S using xda premium
Someguyfromhell said:
Did you make factory reset? Wiped dalvik cache?
Sent from my Xperia Arc S using xda premium
Click to expand...
Click to collapse
yes i did :/
Just restart the phone and see if it works, else just reinstall the ROM, i.e. Do a factory reset + wipe cache partition + format system + wipe Dalvik cache, followed by installing the ROM followed by installing gapps and then reboot.
hmnk said:
Just restart the phone and see if it works, else just reinstall the ROM, i.e. Do a factory reset + wipe cache partition + format system + wipe Dalvik cache, followed by installing the ROM followed by installing gapps and then reboot.
Click to expand...
Click to collapse
ok thanks, also i have to flash the ftf file they said to use as baseband first right?
sutty23 said:
I have flashed cm7 and it worked successully, the stable version, minus that the google play store was getting a server error. Anyway im trying to upgrade to cm9, i flashed boot.img and in cwm i flashed cm9, and gapps. But when it starts and android upgrades etc i am stuck at "unfortunately setup wizard has stopped working"" any help? i dunno what to do
Click to expand...
Click to collapse
this happens randomly for CM9, the wizard will restart if it doesn't you can try my method(assuming you have all the files in your SD card)
1.Flash stock Rom (2.3.4)
2.install CWM and root
3.Flash Kernel
4.flash Baseband
5.Go to CWM, restore to factory defaults, clear cache and dalkiv(optional)
6. flash CM9 then G-apps then Accelometer fix(optional)
7. reboot
again the setup wizard my crash or stop but it'll restart and work
goodluck!
tokaides said:
this happens randomly for CM9, the wizard will restart if it doesn't you can try my method(assuming you have all the files in your SD card)
1.Flash stock Rom (2.3.4)
2.install CWM and root
3.Flash Kernel
4.flash Baseband
5.Go to CWM, restore to factory defaults, clear cache and dalkiv(optional)
6. flash CM9 then G-apps then Accelometer fix(optional)
7. reboot
again the setup wizard my crash or stop but it'll restart and work
goodluck!
Click to expand...
Click to collapse
thx for help, btw ermmm im installing gapps-ics-20120429-signed, is that correct?
well thats it i give up, thanks for all the help but i keep getting the same setupwizard stopped error, and it wont go away although i did exactly as u said step by step :/ damn...back to real ics 5.1
sutty23 said:
well thats it i give up, thanks for all the help but i keep getting the same setupwizard stopped error, and it wont go away although i did exactly as u said step by step :/ damn...back to real ics 5.1
Click to expand...
Click to collapse
Well all you have to do is change the gapps version... you downloaded the wrong version dude...
"Unfortunately Setup Wizard has stopped working" - after trying to install Gapps
So I've successfully managed to get the current CM nightly on my S2, after a few trials and tribulations.
I'd left my phone alone for a bit, all working fine.
Then I decide to get it sorted properly, and install the Google Apps.
Googling told me to use the 20120429 version. So I downloaded that (using the phone's browser), went into CWM and installed it. No joy.
Silly me, I didn't reset + clear cache. So I did that. Still no joy.
So now I've re-installed CM and done a reset + clear cache.
And still I'm stuck looking at the 'setup wizard stopped working' messages, in an endless soul-destroying loop
What can I do?
Would re-installing a stock rom and then re-rooting do the trick?
I can't get Odin to connect, and so I've copied the zipped 4.0.3 rom into the internal SD card, but CWM fails (is it because it has a .dll file alongside the .tar?)
I'm wishing I'd left the phone alone now
RostokMcSpoons said:
So I've successfully managed to get the current CM nightly on my S2, after a few trials and tribulations.
I'd left my phone alone for a bit, all working fine.
Then I decide to get it sorted properly, and install the Google Apps.
Googling told me to use the 20120429 version. So I downloaded that (using the phone's browser), went into CWM and installed it. No joy.
Silly me, I didn't reset + clear cache. So I did that. Still no joy.
So now I've re-installed CM and done a reset + clear cache.
And still I'm stuck looking at the 'setup wizard stopped working' messages, in an endless soul-destroying loop
What can I do?
Would re-installing a stock rom and then re-rooting do the trick?
I can't get Odin to connect, and so I've copied the zipped 4.0.3 rom into the internal SD card, but CWM fails (is it because it has a .dll file alongside the .tar?)
I'm wishing I'd left the phone alone now
Click to expand...
Click to collapse
What version of CyanogenMod are we talking about here? You need to be more specific.
themadba said:
What version of CyanogenMod are we talking about here? You need to be more specific.
Click to expand...
Click to collapse
Right, maybe I found the cause of the problem - I've installed cm-10.1-20130125-NIGHTLY-i9100 but when I wanted to find out which version of Gapps I needed I couldn't be sure what it was so I decided to just find the original download page again. But somehow I managed to find this page http://get.cm/?device=galaxys2 (a rather too easy mistake to make?) ...which has version 9! So I've tried to install the wrong Gapps file
RostokMcSpoons said:
Right, maybe I found the cause of the problem - I've installed cm-10.1-20130125-NIGHTLY-i9100 but when I wanted to find out which version of Gapps I needed I couldn't be sure what it was so I decided to just find the original download page again. But somehow I managed to find this page http://get.cm/?device=galaxys2 (a rather too easy mistake to make?) ...which has version 9! So I've tried to install the wrong Gapps file
Click to expand...
Click to collapse
I thought you might have! I'm not sure whether a simple flash of the correct gapps file will solve your problem or whether you will need to wipe data/factory reset, wipe cache and wipe dalvik cache, reinstall the CM10.1 nightly and then flash the correct gapps file which can be found here: http://goo.im/gapps/gapps-jb-20121212-signed.zip
Try just wiping your cache and dalvik cache in recovery and flashing the new gapps file I linked, if the flashing process doesn't last for atleast 20 seconds, then you may have to carry out the steps I listed above for a complete reinstall.
themadba said:
I thought you might have! I'm not sure whether a simple flash of the correct gapps file will solve your problem or whether you will need to wipe data/factory reset, wipe cache and wipe dalvik cache, reinstall the CM10.1 nightly and then flash the correct gapps file which can be found here: http://goo.im/gapps/gapps-jb-20121212-signed.zip
Try just wiping your cache and dalvik cache in recovery and flashing the new gapps file I linked, if the flashing process doesn't last for atleast 20 seconds, then you may have to carry out the steps I listed above for a complete reinstall.
Click to expand...
Click to collapse
Thanks but I've now tried the reset / wipes / reinstalls multiple times to no avail. And now when I connect my phone to my pc to try to put the correct gapps zip on there, Windows Explorer is only showing a few of the folders on Internal Storage. The stuff that I've already got at root isn't showing. Have I knackered my phone?
I'm going to have to leave it til the morning - the battery is nearly empty.
Edit: Damn, I couldn't get to sleep without fixing it first, and luckily I did: I rebooted my pc, and the explorer eventually did show the contents ok (just very slowly). I dragged the zip in, installed it with CWM and *huzzah* it's working! The only odd thing is the camera has disappeared from the applications...
I can wait until tomorrow to work that out.
Thanks for your help
RostokMcSpoons said:
Thanks but I've now tried the reset / wipes / reinstalls multiple times to no avail. And now when I connect my phone to my pc to try to put the correct gapps zip on there, Windows Explorer is only showing a few of the folders on Internal Storage. The stuff that I've already got at root isn't showing. Have I knackered my phone?
I'm going to have to leave it til the morning - the battery is nearly empty.
Click to expand...
Click to collapse
That's strange. I recently flashed a wrong gapps file and it led to some things not working, especially the Play Store. I tried just wiping the cache and dalvik cache and flashing, but that didn't work. So I did a wipe data/factory reset, wipe cache and wipe dalvik cache, reflashed the ROM and then flashed gapps. I think I may have wiped the cache and dalvik cache once more for good luck, and then repaired permissions in the advanced section of recovery. Phone booted up fine and all apps worked perfectly. I doubt the phone is knackered, perhaps try and different ROM just to make sure it boots fine, and then try flash CM10.1 again. Good luck
Samsung Galaxy s2 CM10 trouble Setup Wizard has stopped working
Im from Asia and I guess Samsung s2 int’l version has different features. I already updated my firmware to JB 4.1.2 (leaked) and since I am not satisfied with it,I rooted it and installed siyah as well as cm10 + gapps from XDA links. I followed everything according to the posts and vids.The problem is that after rebooting and CM start up showed up,the next prompt was UNFORTUNATELY,SET UP WIZARD HAS STOPPED WORKING. What’s wrong? I have tried 6x times and no one worked correctly. HELP me!
I was under the same problem few days ago...
flashed 4.2.2 gapps on 4.1.2..
and succumbed to 'unfortunately setup wizard has stopped' error, until i flashed the respective 4.2.2 gapps.
but sadly it ate away my internal memory (cant help )
So the point is
just flash the respective gapps
and then the ROM again
Hi I just installed cyangenmod and it works but setup wizard is crashing and I don't know how to fix this my phone its pretty much unusable. Need help urgently!
The key is to wipe regular cache partition after installing Gapp zip! :]
I think you have the key. I get my cm10.1.5 and I flashed a realy slim gapps (11mb), but after that I didn't wipe cache and dalvik. So the phone didn't woke up because it get stucked in the wizzard setup. So I have to do as u said. And like the other said, reinstall the rom and then the gapps.
Galaxy 5
After using android 2.1 update 1 in my samsung galaxy 5 (GT-I5503)
I updated it with 2.2 froyo then 2.3 then 4.0 then 4.1.
last time I updated to 4.2 CyanogenMod
Before that I could work good in others. But in 4.2 there were problem of contacts in SIM card, these contacts not showing in device.
Then after my device not detacting SIM card for last few months.
Now my phone showing "Unfortunately, Setup Wizard has stopped."
How can I start my phone?
Galaxy Grand CM12 error
Hi,
I have succesfully flashed my galaxy grand and installed CM12 as per instructions given. But i am constantly facing issue of "Unfortunately Setup wizard has stopped". I have tried all the methods mentioned, but still facing same.
Pls Help
fixed this error(setup wizard or google play service has stoped).first you must install cm13 after that install your gapps(use phliz toch recovery) then reboot device.you Will notic that device doesn't boot or you'll have the same problem(setup wizard).come back to recovery and install the other recovery(change phliz touch to CWM) then with wipe install the same ROM and after that install gapps.the gapps won't install so reboot the device.enjoy your ROM with gapps
fix
FOR ANY1 facing this problem on cm13 setup wizard stopped.
just do as i say it's actually funny but it worked for me for the very 1st time.
I tried all the fix given like clear cache or flash new gapps but nothing solved the problem.
So just do what i say.
when u see the setup wizard stopped error.
on that screen just touch all the corner of the screen of ur phone
staring from the top left corner then the top right and so to the bottom right corner and then at last the left most corner.
Just keep trying i doesn't happen for the first time.
Most of u would be thinking it's funny but it actually worked just give it a try.
it helped me might work for u as well
---------- Post added at 07:49 PM ---------- Previous post was at 07:43 PM ----------
dkarry said:
Hi,
I have succesfully flashed my galaxy grand and installed CM12 as per instructions given. But i am constantly facing issue of "Unfortunately Setup wizard has stopped". I have tried all the methods mentioned, but still facing same.
Pls Help
Click to expand...
Click to collapse
bro just start your phone and on the screen where u see the error
leave it as it is and do this:
touch the top most left corner twice like tapping on it nad then the right most corner then the right bottom corner then lastly the left most corner.
it helped me might help u as well
sir,
i have samsung galaxy star GT-S5282 model but i am unabble to start the Device because of error of unfortunately samsung setup wizard has stoppeed
Hi guys,
I have recently registered and was wondering if someone can help me please.
I have a rooted Galaxy S3 running PA 2.54. I used Goo Manager to install TWRP and download PA 3.0 and the latest Gapps to my SD card.
I booted into recovery. Did a factory reset, wiped cache, wiped dalvik. Then installed rom, gapps and did a reboot.
I get past the boot screen, but then I get two error messages: "Unfortunately, the process com.google.process.gapps has stopped" and "Unfortunately, Setup wizard has stopped". I keep pressing ok, but it doesn't allow me to progress any further. I can't access anything else and the only thing I am able to do is hold down the power button to reboot.
I have made a back up and restored my phone back 2.54 and everything works fine. I tried it one more time and the same thing happened.
Any help will be really appreciated.
shaz4215 said:
Hi guys,
I have recently registered and was wondering if someone can help me please.
I have a rooted Galaxy S3 running PA 2.54. I used Goo Manager to install TWRP and download PA 3.0 and the latest Gapps to my SD card.
I booted into recovery. Did a factory reset, wiped cache, wiped dalvik. Then installed rom, gapps and did a reboot.
I get past the boot screen, but then I get two error messages: "Unfortunately, the process com.google.process.gapps has stopped" and "Unfortunately, Setup wizard has stopped". I keep pressing ok, but it doesn't allow me to progress any further. I can't access anything else and the only thing I am able to do is hold down the power button to reboot.
I have made a back up and restored my phone back 2.54 and everything works fine. I tried it one more time and the same thing happened.
Any help will be really appreciated.
Click to expand...
Click to collapse
Can anyone help with this please?
I have installed CM10.1 rom in Galaxy S3 i9300 and later i had installed the gapps-jb-20121011-signed.zip. From then I am getting the error "Unfortunately, Setup Wizard has stopped. I guess the gapps is incompatible with the CM version.
I am unable to ROM again as the SDcard is not able to mount in CWM recovery.
Pl. help me to solve this by either uninstalling the current gapps or doing a fresh ROM, i am not able to proceed to do anything on the phone.
Thanks
wipe system, wipe data, flash CM, boot up, get the correct gapps
Glebun said:
wipe system, wipe data, flash CM, boot up, get the correct gapps
Click to expand...
Click to collapse
Got it done, i have booted the rom and works fine.
Thanks
I'm trying to install CM10 on my XP U but I can't get it to boot. It's stuck in the FreeXperia screen, any ideas?
I followed FreeXperia's steps
carlaba2 said:
I'm trying to install CM10 on my XP U but I can't get it to boot. It's stuck in the FreeXperia screen, any ideas?
I followed FreeXperia's steps
Click to expand...
Click to collapse
The xperia u codename is kumquat. Are you sure you installed that one?
Did you wipe via cwm cache, dalvik cache and did factory reset?
Problem solved
DaRk-L0rD said:
The xperia u codename is kumquat. Are you sure you installed that one?
Did you wipe via cwm cache, dalvik cache and did factory reset?
Click to expand...
Click to collapse
Yes I used kumquat and full wiped .
But the problem is solved now! It was my fault, I'm kind of a noob and I followed the instructions step by step. Problem is that, in the instructions, the wipe is listed after flashing and not before. I figured it had no sense to wipe system after flashing, so I did it before flashing and everything went well.
I just wanted to try CM10 anyway, but it's not yet ready for daily use, so I went back to CM9. Now I have a different problem :S. Yesterday, after flashing, everything was working well, but today some system apps were not opening (phone, messages, browser, etc.. not even keyboard). I just did a full wipe (yes, again ) and reflashed CM9 and GAPPS, hope it works well this time