my problem:
I have motorola razr maxx xt910
I can not flash baseband image file (bp.img) using boot menu manager: trying flash bp.img 24,5 mb.
log:
-- flashing: /ext/bp.img
finding update package....
opening update package....
installing update...
assert failed: motorola.motoflash(getprop("firmware.path"))
E:Error in /script/radio.zip
(Status 7)
Flashing aborted.
attached screenshot
and I can not flash the radio.img 14 mb using fastboot. logfile attached
i using U_04.11.01P now
OTWEJlbHIK said:
my problem:
I have motorola razr maxx xt910
I can not flash baseband image file (bp.img) using boot menu manager: trying flash bp.img 24,5 mb.
log:
-- flashing: /ext/bp.img
finding update package....
opening update package....
installing update...
assert failed: motorola.motoflash(getprop("firmware.path"))
E:Error in /script/radio.zip
(Status 7)
Flashing aborted.
Click to expand...
Click to collapse
HI, everyone! I have the same problem on my xt912, I mean I'd love to flash the baseband, but I only have exactly the same Status 7 error trying to flash it as a firmware using BMM. No matter wich baseband I pick up to flash, it's all the same and I'm still forced to use CDMA_N_05.21.00R LTEDC_U_09.1D.00. Actually I don't mind at all using this baseband, but there is one little BUT. I've bought the device to be able to use gprs-internet and I really can't on this baseband. BTW, I'm on JB 4.1.2 stock and It doesn't matter even if I flash other custom ROM on JB..the problem appears at start. And it's a quite weird one: there is a letter E in the notification bar and there is a connection sometimes, but it is very unstable and I only can send a few kilobytes, then nothing. So, this made me think the cause of this problem is a wrong baseband.
As for flashing it using motoflash it's getting even more weird. No mistakes on the PC screen, everything's fine until then device reboots to the stock recovery without my help and after about 30 seconds It reboots one more time and all I see after the rom loads is...yeah, wright, the same baseband I've been trying to change ((
Any ideas??
Maybe someone can make an update.zip with only the baseband for me to install it from the BMM as zip?? That'd be just great!!!!
Thanks for your participation!!!
attached the log from BMM
rename the file to bp.img and make sure that you have no space in the path.
ex: clockworkmode/firmware/bp.img
Ihad the same problem flashing kernel and it was that I had a space in the path
hope this helps
i have baseband "bp.img" in internal storage. i haven't folder "clockworkmode" anywhere. I get the common phrase in stock recovery and BMM:
searching for flash devices...
unable to find flash devices
retry flashing
script aborted
OTWEJlbHIK said:
i have baseband "bp.img" in internal storage. i haven't folder "clockworkmode" anywhere. I get the common phrase in stock recovery and BMM:
searching for flash devices...
unable to find flash devices
retry flashing
script aborted
Click to expand...
Click to collapse
I guess you must have folder clockworkmod into your internal memory as long as you have installed BMM
Mine was an example. Open the file manager and see if there is no space into the path of bp.img. If it is, rename it deleting only the space
I repeat: I don't know if this works, I had this problem with kernel and I had a space into the path
Also you can make a backup of your kernel/baseband and see where it is and how the path looks like
You can check post no 55 for other example in this thread:
http://forum.xda-developers.com/showthread.php?t=2149286
baseband can not backup by BMM - no such function. from ext/clockworkmode/firmware/bp.img don't flash too.
weird... maybe uninstall/reinstall BMM
I've seen that your file has 14 MB It must have around 25. Did you downloaded correctly?
otherwise my knowledge regarding this issue stops here. sorry mate
edit: My mistake about size of baseband
it's a pity. i reinstall BMM many times...it does not help
I'm having the same problem on my xt910, I can not update the baseband, I'm no gps and 3g. Feedback I have the exact same error.
sakitari said:
HI, everyone! I have the same problem on my xt912, I mean I'd love to flash the baseband, but I only have exactly the same Status 7 error trying to flash it as a firmware using BMM. No matter wich baseband I pick up to flash, it's all the same and I'm still forced to use CDMA_N_05.21.00R LTEDC_U_09.1D.00. Actually I don't mind at all using this baseband, but there is one little BUT. I've bought the device to be able to use gprs-internet and I really can't on this baseband. BTW, I'm on JB 4.1.2 stock and It doesn't matter even if I flash other custom ROM on JB..the problem appears at start. And it's a quite weird one: there is a letter E in the notification bar and there is a connection sometimes, but it is very unstable and I only can send a few kilobytes, then nothing. So, this made me think the cause of this problem is a wrong baseband.
As for flashing it using motoflash it's getting even more weird. No mistakes on the PC screen, everything's fine until then device reboots to the stock recovery without my help and after about 30 seconds It reboots one more time and all I see after the rom loads is...yeah, wright, the same baseband I've been trying to change ((
Any ideas??
Maybe someone can make an update.zip with only the baseband for me to install it from the BMM as zip?? That'd be just great!!!!
Thanks for your participation!!!
Click to expand...
Click to collapse
I have the same issue with my xt909.
baseband 05.21 all the time and losting gsm signal at all.
OTWEJlbHIK said:
my problem:
I have motorola razr maxx xt910
I can not flash baseband image file (bp.img) using boot menu manager: trying flash bp.img 24,5 mb.
log:
-- flashing: /ext/bp.img
finding update package....
opening update package....
installing update...
assert failed: motorola.motoflash(getprop("firmware.path"))
E:Error in /script/radio.zip
(Status 7)
Flashing aborted.
attached screenshot
and I can not flash the radio.img 14 mb using fastboot. logfile attached
i using U_04.11.01P now
Click to expand...
Click to collapse
take a look here:http://forum.xda-developers.com/showthread.php?t=2412416
in third post baseband thread
i had the same problem,i solved flash from fastboot the stock jb,but you can flash the baseband like a normal zip using bbm or ss
did u try to go on firmware flashing in BMM?Go t o BMM,frimware flashing and flash bp.img
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Vallerino WR said:
take a look here:http://forum.xda-developers.com/showthread.php?t=2412416
in third post baseband thread
i had the same problem,i solved flash from fastboot the stock jb,but you can flash the baseband like a normal zip using bbm or ss
Click to expand...
Click to collapse
This or any other known methods to flash radio image to xt910 doesn't work with the error in OP. This is like, it is radio partition is corrupted and cant be flashed with correct image.
Hope to find a solution, still diggin' !
Related
Im trying to update to a new 2.2.2 update that bell just released for canadian users.
I download it, I press install, it reboots my phone into android recovery.
It begins to install the update, then it shows me this:
verifying current system...
assert failed: apply_patch_check ("/system/app/AccountAndSyncSettings.apk". "a bunch of numbers", "A bunch of numbers", E:Error in /cache/Blur_Version.0.37.4.MB860.BellMobility.en.CA.zip
(Status 7)
Installation Aborted.
Can anyone help? Its really frustrating not being able to update.
My phone was rooted, deodexed, and I flashed a few .zip's to it. I factory reset it before I attempted to do this update.
HELP WOULD BE GREATLY APPRECIATED
This is the menu I'm in when I talk about "android recovery"
However, this is not my phone. This picture is just to jog your memory if you dont know what im talking about.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Just reboot El phone
Sent from my MB860 using XDA App
neer2005 said:
Just reboot El phone
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Remove my battery and reboot it? The update said it would reboot itself.
Also, what does the picture I'm describing mean?
Thanks.
are we talking about 2.3.4 or what kind of update?
It means your phone is rooted and you need to do an SBF flash
Pretty sure that is the recovery screen. If I remember correctly if you touch above the search button it should take you into the recovery menu
samcripp said:
are we talking about 2.3.4 or what kind of update?
Click to expand...
Click to collapse
He's talking about the update from Bell that came out today. Its similar to the 4.1.83 update from At&t
Sorry guys its the 2.2.2 update released for bell atrices (in canada)
There is no menu unfortunately.
It looks like the bottom portion of this image, there is no menu.
Try pressing the bottom left and right corners, should bring up that screen.
Cheers!
Since it's 43MB is size, I am guessing glad root or my util should be able to preserver root using frozenfish in /osh/sbin.
Downloading it now, Blur_Version.0.37.4.MB860.BellMobility.en.CA.zip in /cache, I'll upload it to my dropbox for folks when it's done.
Cheers!
How can those who have flashed 2.1.1 get this update?
You would need stock Bell firmware for an update to apply I would think. Probably not much different that what you have anyway, I'll see if I can nab the radio from it though.
NFHimself said:
Try pressing the bottom left and right corners, should bring up that screen.
Cheers!
Since it's 43MB is size, I am guessing glad root or my util should be able to preserver root using frozenfish in /osh/sbin.
Downloading it now, Blur_Version.0.37.4.MB860.BellMobility.en.CA.zip in /cache, I'll upload it to my dropbox for folks when it's done.
Cheers!
Click to expand...
Click to collapse
Thanks so much. That brought up the screen.
However, my update failed. I'll post the exact error or PM you if I can't figure it out for myself.
Will that update be flashable via CWM? And where can I find your dropbox.
Regards,
Mag
I'll post when I get it done.
Here you go:
http://dl.dropbox.com/u/23800522/Blur_Version.0.37.4.MB860.BellMobility.en.CA.zip
http://dl.dropbox.com/u/23800522/Blur_Version.0.37.4.MB860.BellMobility.en.CA.crc
/cache/recovery/command = --update_package=CACHE:Blur_Version.0.37.4.MB860.BellMobility.en.CA.zip
Frozenfish works to get root access again, in fact your su and shsu binaries stay in the system folder, all you have to do is chmod 06755 /system/bin/shsu etc.
Cheers!
NFHimself said:
You would need stock Bell firmware for an update to apply I would think. Probably not much different that what you have anyway, I'll see if I can nab the radio from it though.
Click to expand...
Click to collapse
(n00b question) Why would the radio be useful and how would I install it?
DELETE POST NFHimself is too damn fast
My error log while updating in android recovery haas been posted on my original post!
Please help! Thanks!
IrshaadH said:
(n00b question) Why would the radio be useful and how would I install it?
Click to expand...
Click to collapse
Well, if you are using a Bell Atrix in Canada and it's working right, then why not? How is unknown to me right now, the files are in the zip, might be able to do a swap in an sbf, not sure.
Just got 1850 in a speed test for upload indoors, fastest I've had yet, previous was ~1780, that could be a good reason.
Cheers!
Magnetox said:
My error log while updating in android recovery haas been posted on my original post!
Please help! Thanks!
Click to expand...
Click to collapse
I had the same error, I odexed my system and copied the zip and crc back to cache, and did the update again, it asked me if I wanted to install it, and as it was doing that I grabbed the command file from /cache/recovery and put it on my sdcard. So really, all you need to do is have those 3 files in /cache and reboot into android recovery and you should be good to go.
I am thinking that it's the patch files that need to have the original files in order to work.
Cheers!
y2whisper said:
zip is here if for some reason you have a bell rom and have trouble downloading.
http://db.tt/eo1hyTK
Click to expand...
Click to collapse
So, with this zip, would I be able to install on a 2.1.1 sbf from recovery mode?
This thread doesn't belong here.
372.8 MB
How to install video by TheRazrGuy:
www.youtube.com/watch?v=-TCgj5gbmf0
How to install from another ICS leak (same carrier, model, etc.):
Put the leak on your external SD card.
Fastboot a patched boot.img using the boot.img.p from this leak's /patch/ folder and the boot.img from the latest official version's fastboot files. (See my thread on patching boot images here: http://forum.xda-developers.com/showthread.php?p=27211509 )
NOTE: If someone posts a reply with a boot.img they patched, you can use that one as well. Only one person has to make one and post it.
Fastboot the system.img and preinstall.img from the latest official version
Boot to recovery and install the newer ICS leak.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Mattlgroff's Notes:
Upgraded CDT.bin, so no going back to GB after this.
Android 4.0.4 ICS - "RTGB/XT910_RTGB/umts_spyder:4.0.4/6.7.2-180_SPU-19-TA-11.2/1339215326:user/release-keys"
HOW TO ROOT: http://goo.im/apps/mattlgroff/DroidRazrRoot404.zip ---- Run the batch file in this. Be connected via USB (MTP Mode recommended), and have USB Debugging Enabled (Settings>Developer Options)
Build date 9/6/2012
If you have Superuser left over and root is failing use this: http://rombot.droidhive.com/ROMs/spyder/ROOT/DroidRazrRoot404(IfYouAlreadyHaveSuperUser).zip
Must be on 651.167.26.XT910.Retail.en.EU stock rooted to install.
Updating post as more info comes along.
Download: http://goo.im/roms/mattlgroff/Blur_Version.651.167.26.XT910.Retail.en.EU.zip
MD5: CD65E827089384FB7D7FE1158E5E0AB3
[Guide] How to updrade from T-Mobile ICS to 672.180.17(33).XT910.Retail (UNBRICK) --- By HSD-Pilot
http://forum.xda-developers.com/showthread.php?t=1738769
----------------------------------------------------------------------------------------------------------------------------------------------------------------
Be on STOCK 651.167.26.XT910.Retail.en.EU. No frozen apps. No custom recoveries, etc.
Install instructions are using ES File Manager and Rom Manager (free) from the Play Store download these and be rooted on 651.167.26.XT910.Retail.en.EU.
open rom manager free, hit OK, now press the home button.
open es file explorer, press YES, press menu, open settings, scroll down to Path settings and under Root settings: Enable
Up to Root (path settings)
Root Explorer (root settings)
Mount File System (root settings)
"DOWNLOAD THE ICS UPDATE ZIP AND PLACE INTO YOUR PHONES /CACHE DIRECTORY (not /system/cache, but in the root of the phone)"
open ES FILE EXPLORER, locate your /cache directory and then select the Blur_Version.651.167.26.XT910.Retail.en.EU.zip
(now choose Open With ROM MANAGER)
phone will restart, and begin installation of the ICS leak (takes 10-15minutes)
phone restarts, boot animation begins, Android is upgrading :: Profit success!! Celebrate!!!
----------------------------------------------------------------------------------------------------------------------------------------------------------------
LOL, Motorola server must be busy with your download activity..
I can foresee a need for offline patching tool.
Yes Whirleyes, offline patching tool would be great
I'll try to add it to my BootMenu Manager app
whirleyes said:
I'll try to add it to my BootMenu Manager app
Click to expand...
Click to collapse
Hi mate do it as an apart tool. Many doesn't know howto manually patch.
This sounds really usefull.
Cheers
Sent from my XT910 using xda premium
Passed as 100 names of Firmware for the RAZR, I hope you get them all lol
Sorry my bad english xD
pedrotorresfilho said:
Hi mate do it as an apart tool. Many doesn't know howto manually patch.
This sounds really usefull.
Cheers
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
Indeed. Will call it MotoPatcher
Pzyduck said:
Passed as 100 names of Firmware for the RAZR, I hope you get them all lol
Sorry my bad english xD
Click to expand...
Click to collapse
You still missing XT909,XT910S&XT910K firmwares
Blur_Version.65.3.58.XT910K.KT.en.KR
65.88.12.XT910.ChinaRetail.en.CN
Blur_Version.651.167.3370.XT910.Movistar.en.01
Blur_Version.651.73.250.XT910.AmericaMovil.en.01
Blur_Version.651.167.3370.XT910.Brasil.en.BR.zip
:good:
lol
is it for 167.26 en.eu ?
sevenup30 said:
is it for 167.26 en.eu ?
Click to expand...
Click to collapse
Must be on 651.167.26.XT910.Retail.en.EU stock rooted to install.
Yup
whirleyes said:
LOL, Motorola server must be busy with your download activity..
I can foresee a need for offline patching tool.
Click to expand...
Click to collapse
Good foresight
I'll leave it to you XT910 folks to make that tool lol
sevenup30 said:
is it for 167.26 en.eu ?
Click to expand...
Click to collapse
exaclty. it's the new ics ota. and looks like the real thing.
cheers
so if we are already on the earlier stock en.eu leak, the .17 one, will we be able to install it? And if so, how? Thanks.
ales100i said:
so if we are already on the earlier stock en.eu leak, the .17 one, will we be able to install it? And if so, how? Thanks.
Click to expand...
Click to collapse
You have to patch the boot.img from previous gb and flash it with system_signed from the same gb version.
Sent from my XT910 using xda premium
Hi all guys.
I'm on ICS leak 672.152.27.Retail.en.EU.
Can I update using .26 patched file (2.3.6) from here, put new leak in my ext-sd and start update by stock recovery after a wipe cache?
Verifying current system...
assert failed: apply_patch_check("MTD:boot:8388608:0b5........
E:Error in /tmp/sideload/package.zip(status 7)
i flash boot_new.img then system_signed from right GB like i used to do with the previous EU leak.
sevenup30 said:
Verifying current system...
assert failed: apply_patch_check("MTD:boot:8388608:0b5........
E:Error in /tmp/sideload/package.zip(status 7)
i flash boot_new.img then system_signed from right GB like i used to do with the previous EU leak.
Click to expand...
Click to collapse
Reinstall preinstall of 2.3.6
Pzyduck said:
Reinstall preinstall of 2.3.6
Click to expand...
Click to collapse
that what i did, but no luck... i reflash the previous enEU leak and it passed great.
It seems that new ota dont only check system but also the boot partition.
Pzyduck said:
Reinstall preinstall of 2.3.6
Click to expand...
Click to collapse
Nah man thats a boot.img problem. He needs to flash the boot.img for THIS update. Which I am not sure if someone made it or not yet.
Hi everyone,
Like always, I've to have a few troubles when I'm trying to upload software in my mobile... Well, the thing is, I have a Galaxy SII i9100 with android 4.1.2. I tried for the first time in my life installing a ROM (I'm root and have CWM). The first time I tried installing the last software of CM 10.1 for the galaxy S2 (cm-10.1-20130602-NIGHTLY-i9100.zip), but I couldn't for some signature errors. I wiped data and it didn't work neither. I found out that the problem was cause by the version of CWM, so I installed the last Phil Z edition of CWM (Phil Z Touch 4). Cool! No more signature problems..! Nope, but now I've another one. This error says: "E: Error in /sdcard/cm-10.1-20130602-nightly-i9100.zip" (Status 7) Installation aborted".
I kept reading forums and it said it could be a "PhilZCWM-thing", so I thought I could try installing the "Siyah" one. But I restarted the phone so that I could put the Siyah zip inside and the phone won't start. It is stuck on the Samsung logo. You've any idea of what I could do ??
P.S: I tried to do it with Odin but it doesn't recognize the device cause it doesn't appear COM in yellow. The CWM is working. Regards and thanks in advance...
P.S.2: I managed to install the CWM Siyah, but it keeps appearing the same error...
EDIT: I used the original firmware with Odin and now the phone is back. But I still don't know how to put Cyanogenmod on it..
Cloudsev said:
Hi everyone,
Like always, I've to have a few troubles when I'm trying to upload software in my mobile... Well, the thing is, I have a Galaxy SII i9100 with android 4.1.2. I tried for the first time in my life installing a ROM (I'm root and have CWM). The first time I tried installing the last software of CM 10.1 for the galaxy S2 (cm-10.1-20130602-NIGHTLY-i9100.zip), but I couldn't for some signature errors. I wiped data and it didn't work neither. I found out that the problem was cause by the version of CWM, so I installed the last Phil Z edition of CWM (Phil Z Touch 4). Cool! No more signature problems..! Nope, but now I've another one. This error says: "E: Error in /sdcard/cm-10.1-20130602-nightly-i9100.zip" (Status 7) Installation aborted".
I kept reading forums and it said it could be a "PhilZCWM-thing", so I thought I could try installing the "Siyah" one. But I restarted the phone so that I could put the Siyah zip inside and the phone won't start. It is stuck on the Samsung logo. You've any idea of what I could do ??
P.S: I tried to do it with Odin but it doesn't recognize the device cause it doesn't appear COM in yellow. The CWM is working. Regards and thanks in advance...
P.S.2: I managed to install the CWM Siyah, but it keeps appearing the same error...
EDIT: I used the original firmware with Odin and now the phone is back. But I still don't know how to put Cyanogenmod on it..
Click to expand...
Click to collapse
First of all,calm down.Please tell me what ROM and kernel are you using now.Make a screeshot of settings.
With some kernel like Dorimanx, in recovery mod, usb storage could work and your pc can "see" your phone.
Have you got an sdcard ? You will can download a new rom and copy to sdcard with your computer. After, plug in the GS2 and try again to install after do all wipe (data, dalvik, cache). You can fix permission after flashing.
Ok well. As I just told, my mobile is working again... So I can transfer files again. Here it is the info you guys need:
Mode Nº: GT-I9100
Android Version: 4.1.2
Baseband Version: I9100XXLS8
Kernel Version: 3.0.31-889555 [email protected]#3 SMP PREEMPT Thu Jan 31 KST 2013
Compilation Number: JZO54K.I9100XWLSD
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
EDIT: I think I just solved the problem... In the web page of CyanogenMod they've uploaded two files. One of them today, and the other one yesterday. With the one from yesterday it's working..
EDIT 2: The yellow triangle appeared, so I tried to use Odin with the original software again cause I think I know how to solve it. Now the logo of Samsung keeps appearing and the phone doesn't start again...just GREAT pfff
EDIT3: Wiped cache and data and now works.. let's see how this goes.. (Apparently the phone doesn't connect to the wifi signal, this is new )
EDIT4: Finally the mobile is working again but I cant manage to install PhilZ Kernel for the mod. I've tried this from the SC card but now I get the error "failed to verify the whole-file signature". I think the solution is again setting the kernel PhilZ or Siyah with Odin, and then getting rid of the triangle with an app, but I would like to avoid flashing again. Any idea..?
EDIT5: I finally flashed it and I got CM, but when I got in there, there were a lot of things missing in the status bar and I didn't have any google apps despite having installed them. I'm just sick of CM, I'm back to v4.1.2 and that's it. Thanks for everything...
Hi, guys!
I have a problem with SP Flash Tool. I'm trying to install CWM Recovery into Fly IQ444 Quatro (it is the same, as Gionee Dream D1/GN878), using this manual
After starting of flashing i got this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What does it mean? What can I do to solve this issue?
I am not sure if it was the same error, but I had something similar with my Allview P6 Stony. I fixed it by using a different (in my case older) version of SP Flash tool.
May be trying another version will help you too??
My phone is not the same as yours, but in the end I used the version of SP Falshtool I posted here: http://forum.xda-developers.com/showpost.php?p=43678784&postcount=46
I hope this might help you.
Regards,
Salvolin
flash tool problem
scan4u said:
Hi, guys!
I have a problem with SP Flash Tool. I'm trying to install CWM Recovery into Fly IQ444 Quatro (it is the same, as Gionee Dream D1/GN878), using this manual
After starting of flashing i got this:
What does it mean? What can I do to solve this issue?
Click to expand...
Click to collapse
The problem is with the scatter file and you have to alter a line in it.
Take a look on this post from a greek forum (use google translate)
http://www.myphone.gr/forum/showthread.php?p=4807552
Find th error on SP_FLASH_TOOL.log and then copy the anticipated value to the scatter file .
Save the file and reload it to flash tool.
thanx it works but u need to change quiet a few values.. before it finally works
Pakistani_1 said:
thanx it works but u need to change quiet a few values.. before it finally works
Click to expand...
Click to collapse
Same problem here. Can you tell me how you fixed it please?
e1911_v77_ht_6628_s3_v20
HRSB said:
Same problem here. Can you tell me how you fixed it please?
Click to expand...
Click to collapse
same problem
same here, i cant restore my tab tried nearly all versions of sp flash tool uploading screenshots and log file now
Go here http://www.phcorner.net/threads/fix-error-8038-in-sp-flash-tool.64302/
sunu792002 said:
Go here http://www.phcorner.net/threads/fix-error-8038-in-sp-flash-tool.64302/
Click to expand...
Click to collapse
Didn't work, mtk droid tool creates a wrong scatter file, this is the error i got in sp flash tool log file
Thank You
Salvolin said:
I am not sure if it was the same error, but I had something similar with my Allview P6 Stony. I fixed it by using a different (in my case older) version of SP Flash tool.
May be trying another version will help you too??
My phone is not the same as yours, but in the end I used the version of SP Falshtool I posted here: http://forum.xda-developers.com/showpost.php?p=43678784&postcount=46
I hope this might help you.
Regards,
Salvolin
Click to expand...
Click to collapse
Thank You, my phone is back
can someone explain what this is asking me to do?
NOT MATCH: load item key(PRELOAD), value(0x3d40000), target item key(ANDROID), value(0x3d40000).(.\NandLayoutParameter.cpp,139)
still having the same problem!
Salvolin said:
I am not sure if it was the same error, but I had something similar with my Allview P6 Stony. I fixed it by using a different (in my case older) version of SP Flash tool.
May be trying another version will help you too??
My phone is not the same as yours, but in the end I used the version of SP Falshtool I posted here: http://forum.xda-developers.com/showpost.php?p=43678784&postcount=46
I hope this might help you.
Regards,
Salvolin
Click to expand...
Click to collapse
i am using canvas juice a177. my device imei has got invalid. got flash the stock rom but when am trying....i am having the same problem tried using the version of flashtools u gave in the ink.. but when am loading from there it is showing invalid scatter file format! what should i do? plz help me?
scan4u said:
Hi, guys!
I have a problem with SP Flash Tool. I'm trying to install CWM Recovery into Fly IQ444 Quatro (it is the same, as Gionee Dream D1/GN878), using this manual
After starting of flashing i got this:
What does it mean? What can I do to solve this issue?
Click to expand...
Click to collapse
Hey, i have got this too but it's gone by using another flashtool version and trying to hit upgrade firmwork instead of Download
solution
scan4u said:
Hi, guys!
I have a problem with SP Flash Tool. I'm trying to install CWM Recovery into Fly IQ444 Quatro (it is the same, as Gionee Dream D1/GN878), using this manual
After starting of flashing i got this:
What does it mean? What can I do to solve this issue?
Click to expand...
Click to collapse
solution.... 1)download all the files drom the link below
https://www.facebook.com/l.php?u=ht...tsuV2-cHhqSzdqTmEtYkU&usp=sharing&h=4AQHo6U2x
2) now unrar it to extract it
3) open sp flash tool recommended version from http://androidxda.com/smart-phone-flash-tool
4) now open it and chose the scatter file from rom folder that you extracted before
5) now from left choose firmware update option rather than download
6)now press download button on the top
7) final and very important thing plug your phone( with battery ) to the usb cable nd ur r gud to go
8) let the bar complete changing colour from red to blue to violet to yellow and u will see a green circle at the end
thats all njoy your stock rom again :highfive::good::victory:
---------- Post added at 06:09 AM ---------- Previous post was at 06:04 AM ----------
scan4u said:
Hi, guys!
I have a problem with SP Flash Tool. I'm trying to install CWM Recovery into Fly IQ444 Quatro (it is the same, as Gionee Dream D1/GN878), using this manual
After starting of flashing i got this:
What does it mean? What can I do to solve this issue?
Click to expand...
Click to collapse
solution.... 1)download all the files drom the link below
https://www.facebook.com/l.php?u=ht...tsuV2-cHhqSzdqTmEtYkU&usp=sharing&h=4AQHo6U2x
2) now unrar it to extract it
3) open sp flash tool recommended version from http://androidxda.com/smart-phone-flash-tool
4) now open it and chose the scatter file from rom folder that you extracted before
5) now from left choose firmware update option rather than download
6)now press download button on the top
7) final and very important thing plug your phone( with battery ) to the usb cable nd ur r gud to go
8) let the bar complete changing colour from red to blue to violet to yellow and u will see a green circle at the end
thats all njoy your stock rom again :highfive::good::victory:
They can help, values must be changed exactly?
Please would be so kind as to tell me I have to change the settings?
Exactly what I have to move
thank you
Hi everyone trying to install a new ROM (cm12 hopefully) to my phone, the phones boot loader in unlocked ive installed TWRP 2.8.5.0 every time i select the 2 rom and gapps zip files for flashing i get error message saying failed and back to the main menu.
Please can anybody help its driving me mad.
David Thompson.
dave0147 said:
Hi everyone trying to install a new ROM (cm12 hopefully) to my phone, the phones boot loader in unlocked ive installed TWRP 2.8.5.0 every time i select the 2 rom and gapps zip files for flashing i get error message saying failed and back to the main menu.
Please can anybody help its driving me mad.
David Thompson.
Click to expand...
Click to collapse
use cm-12.1 make sure you full wipe everything (except data/media you can still format data without nuking the internal sd partition)
Make sure you select the rom FIRST then gapps, also please for the love of jesus remember to flash the boot.img once you've finished flashing the rom + gapps.
If that still fails, give me the recovery.log file.
Getting knowhere just getting FAILED message in red as per your instructions ...
it fails after the rom and g apps install i dont even get to the boot.img
dave0147 said:
Getting knowhere just getting FAILED message in red as per your instructions ...
it fails after the rom and g apps install i dont even get to the boot.img
Click to expand...
Click to collapse
Per my instructions I also said get the recovery.log for me
go to ADVANCED > COPY LOG TO SD
once you have gotten the "fail" message.
then pull it off and upload it for me.
Recovery file see attached.
dave0147 said:
Recovery file see attached.
Click to expand...
Click to collapse
I see the problem, easy fix mate.
script aborted: This package is for device: endeavoru; this device is enrc2b.
Download the ENRC2B One which is the ONE X+ not the ONE X version
https://www.androidfilehost.com/?w=files&flid=28732
The latest one is at the bottom. I also suggest you read this : http://forum.xda-developers.com/htc-one-x2/help/wifi-data-cm-roms-read-posting-t3158955
Done as you stated above but my phone is now stuck on the CM12 loading screen the animation is running but it just stays this way (left the phone for over an hour and no change).
dave0147 said:
Done as you stated above but my phone is now stuck on the CM12 loading screen the animation is running but it just stays this way (left the phone for over an hour and no change).
Click to expand...
Click to collapse
Did you flash the bootimage?
Hi Lloir,
Not sure if i did this in the right order
1. added cm12 rom zip
2. added gapps file
3. swipped and installed the two files above no error message.
4. this is where it may have gone wrong i extracted theBOOT.ing file from the CM12.zip file and added that to TWRP recovery and installed.
5. Re Booted the phone and thats where it does nothing but run the animation.
David.
dave0147 said:
Hi Lloir,
Not sure if i did this in the right order
1. added cm12 rom zip
2. added gapps file
3. swipped and installed the two files above no error message.
4. this is where it may have gone wrong i extracted theBOOT.ing file from the CM12.zip file and added that to TWRP recovery and installed.
5. Re Booted the phone and thats where it does nothing but run the animation.
David.
Click to expand...
Click to collapse
You didn't read the link I gave you. Click the Here in my signature, and follow them step by step.
dave0147 said:
Hi Lloir,
Not sure if i did this in the right order
1. added cm12 rom zip
2. added gapps file
3. swipped and installed the two files above no error message.
4. this is where it may have gone wrong i extracted theBOOT.ing file from the CM12.zip file and added that to TWRP recovery and installed.
5. Re Booted the phone and thats where it does nothing but run the animation.
David.
Click to expand...
Click to collapse
The boot.img isn't supposed to be installed within TWRP. You have to manually flash it through fastboot
Holy crap GRRRRR
done what you said followed your instructions and flashed the boot.img from your link re started the phone and now im getting the white HTC quietly brilliant boot screen then nothing happens.
thanks for your help so far.
David
dave0147 said:
Holy crap GRRRRR
done what you said followed your instructions and flashed the boot.img from your link re started the phone and now im getting the white HTC quietly brilliant boot screen then nothing happens.
thanks for your help so far.
David
Click to expand...
Click to collapse
Ok lets go through this in easy steps.
0) open the ROM ZIP with winrar/7zip and pull out the boot.img
1) reboot into recovery and Wipe system/cache/data in recovery
2) Flash rom + gapps
3) make sure the phone is CONNECTED to the pc and assuming you read the instructions from the other post you have the android adb tools
4) reboot into fastboot it will show this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(random image off the internet)
5) open up the cmd on the pc and go cd to the folder where adb is, in that folder make sure the boot.img is in there and do the following :
fastboot flash boot boot.img
fastboot reboot
sorted.
I know the rom's all boot I test them before releasing.
All done thanks so much for the help one x plus is now update my accounts and apps.
is there a way of checking if theres new ROM updates for the phone?
thanks david thompson
dave0147 said:
All done thanks so much for the help one x plus is now update my accounts and apps.
is there a way of checking if theres new ROM updates for the phone?
thanks david thompson
Click to expand...
Click to collapse
Just check the forum dude. CM-12.1 is unofficial.
Glad your all sorted now, at least you learnt something from this
Can you help with this problem ... i can change my voice mail settings from 901 to 443 it say it wont change.