[Q] T959 Phone doesn't load - Vibrant Q&A, Help & Troubleshooting

I am pretty sure that someone has posted something similar to my problem, but I can't find anything that gives a straight up answer or seems to kind of deviation of the problem.
So I do have cyanagen mod 10 stable installed on my phone and it has been great... No problems what so ever. I'm not sure if something happened or if it was something that I had changed, but the only thing system wise that I had changed was under the ROM Tool Box, I had edited the screen settings to change the dpi of the screen. However, everything worked fine after it changed and rebooted. In fact, I loved the fact that screen was now "bigger..." Meaning that it made the icons and text smaller.
So, now the problem comes, now the phone doesn't load up. The battery died and I plugged the phone into charge it and it turned on like normal with the little loading image of a circle (like the one you seen when a flash file is loading) and then it blinked and did it again, but then nothing. Normally if you let it sit for a second and press the power button, it would show an image of the battery charging. But it doesn't. If I press and hold the power button, it starts to laod up and says "Samung Vibrant" then goes black, and then repeats Samung Vibrant again and again....
Now I am not a super genius on the android thing, but I have flashed many different ROMs and thought I had bricked my phone many times as well, but always have been able to bring it back to life. I am actually starting to think of my phone as "Frankenstien" since it has died and came back so many times...
Now, I have tried to reboot into recovery mode but doing the volume + and - and power, didn't work.
I have tired to boot into download as well...
The phone can be plugged into the computer and it recognizes it as far as sending out a charge to "charge" the phone, but it does not recognize it in Kies or in Odin. I reinstalled the drivers as well and still not recognized... I know the phone is "old" as far as that goes, but it was working fine and currently unemployed, so every penny counts.
Suggestions?

Related

[STICKY THIS] Solution to Fix Any Brick

If your phone was bricked in any way, but still shows something on the screen when powered on or plugged in, try this.
1. Take out battery, put it back in. (to turn the phone fully off)
2. Don't turn it the phone on!
3. Plug the phone into your PC, do not hit the power button!
4. See if the phone shows anything on the screen
IF the phone screen does show the battery charger or something else on the screen after being plugged in without you hitting the power button, so far so good.
5. Now while it's on like this, hold the volume up and volume down buttons.
6. Hold the power button as well as the volume buttons until the screen goes black.
7. As soon as the screen goes black, let go of the power button! But DON'T let go of the volume buttons!
When done properly, this will always get you into Download mode. After that you should be able to use Odin to revert to stock, tar and instructions here:
http://forum.xda-developers.com/showthread.php?t=734475
This fixed my 'odd' bricks. Over and over again.
I'd say it's impossible to truly brick this phone.
I have been researching this most of the day, due to some testing I was doing, and the one thing I have come to realize is that this phone recovers well from "brick" it's not a true brick it's just scary. One of the posts I read, here on xda, said that unless the blue progress bar started advancing while using Odin, you can unplug, pull battery fairly safely.
davbran said:
I have been researching this most of the day, due to some testing I was doing, and the one thing I have come to realize is that this phone recovers well from "brick" it's not a true brick it's just scary. One of the posts I read, here on xda, said that unless the blue progress bar started advancing while using Odin, you can unplug, pull battery fairly safely.
Click to expand...
Click to collapse
Haha well that's exactly what happened to me. I flashed wrong with Odin and it failed halfway through, and I had no choice but to reboot the phone.
And when I did I got a truly odd screen. All I could see was a picture of a phone connected to an exclamation point connected to a laptop. That's it. Lol.
And I fixed it by doing this.
omg, i love you This totally fixed my problem XD
Everyone kept saying go to download mode, but no one ever said to "7. As soon as the screen goes black, let go of the power button! But DON'T let go of the volume buttons!"
super life saver... thanks alot
I actually did find someone else say to do that but it was out of luck as it was deeply buried. Don't remember where it was here lol
Its nice to have people who help us newbies
andershizzle said:
Haha well that's exactly what happened to me. I flashed wrong with Odin and it failed halfway through, and I had no choice but to reboot the phone.
And when I did I got a truly odd screen. All I could see was a picture of a phone connected to an exclamation point connected to a laptop. That's it. Lol.
And I fixed it by doing this.
Click to expand...
Click to collapse
Yea, last night I was messing around with the latest lag fix, but it ending up causing a lot of FC's, so I had to revert to stock a few times. I tried to make it work using ext2 and ext3, but it still wasn't stable enough. I didn't enjoy the noticeable speed increase, but it wasn't worth it since launcher pro was one of the programs that was FCing.
Anyways, so after I gave up for the 3rd time, I flashed stock using ODIN and it got stuck. I left it there for awhile with no progress and the phone's screen actually just went completely black. I pulled the battery and got the weird cell phone pointing to computer icon. I almost crapped my pants at that point. Very scary moment since I had not seen that screen before.
A quick google search for "bricked Vibrant" led me to this thread and voila! My Vibrant is alive and well again.
Thanks a bunch.
PS: After reflashing stock that many times, I still find it strange that after a fresh flash, I still get a noticeable speed boost by wiping the phone through the privacy setting. Not sure if it's a placebo effect, but I swear it makes a noticeable difference every time.
Maverick777 said:
Yea, last night I was messing around with the latest lag fix, but it ending up causing a lot of FC's, so I had to revert to stock a few times. I tried to make it work using ext2 and ext3, but it still wasn't stable enough. I didn't enjoy the noticeable speed increase, but it wasn't worth it since launcher pro was one of the programs that was FCing.
Anyways, so after I gave up for the 3rd time, I flashed stock using ODIN and it got stuck. I left it there for awhile with no progress and the phone's screen actually just went completely black. I pulled the battery and got the weird cell phone pointing to computer icon. I almost crapped my pants at that point. Very scary moment since I had not seen that screen before.
A quick google search for "bricked Vibrant" led me to this thread and voila! My Vibrant is alive and well again.
Thanks a bunch.
PS: After reflashing stock that many times, I still find it strange that after a fresh flash, I still get a noticeable speed boost by wiping the phone through the privacy setting. Not sure if it's a placebo effect, but I swear it makes a noticeable difference every time.
Click to expand...
Click to collapse
Glad I could help!
And that's intersting. I'll make sure to wipe the privacy settings. I actually haven't ever wiped them yet.
No go for me.
I used the stupid partition tool in rom manager. partitioned the internal memory not the sd card.
Saw a few others did this, and this worked for them, either right away or after flashing eugene's froyo rom then reverting back, but that rom just hangs on cache.fsd or something like that.
Trying to repartition through odin, with no download files selected right now. It does not appear to be doing anything, just set pit file, then do not turn off target in odin.
Will leave it for a bit, maybe try to flash this again, i think the issue might be deeper for me though. need kernel and everything else.
I did that but my phone locked up and now all I get is a picture of a yellow cation sign next to a little phone and pc pic.. anything I can do at this point or??
tried going into recovery and download mode but it wont let me past that screen.
Thank you so much for this, I received a replacement set 2 days ago and was playing around the the phone and I bricked it, it thought it was frozen so I pulled the batter and it bricked.
I followed your instructions and it works like a charm. What I did find though is that i can't seem you use odin on a mac even with a virtual machine. I had to use an actual PC.
tweezit said:
I did that but my phone locked up and now all I get is a picture of a yellow cation sign next to a little phone and pc pic.. anything I can do at this point or??
tried going into recovery and download mode but it wont let me past that screen.
Click to expand...
Click to collapse
This is exactly the screen I had. Follow my instructions exactly and you'll get into download mode (at least i did)
This should be made a sticky.
thank you thank you thank you
Sticky this thread.
Sent from my SGH-T959 using XDA App
Great find for all.
has anyone found a way to unbrick a flashed EU rom then the person flashed to US rom? and then the power wont come on? But the unit does get hot when plugged in?
Im trying to see if i need to jtag this thing. or if anyone had success?
Thanks
ok so my vibrant gave me the cell phone and computer screen i got it back in download mode. started odin to get it back to stock but no matter how long i let odin go nothing happens i got the files that i need for odin out of a thread on these forums and i have followed the directions to the letter and still nothing. any help some one can give would be great. thank you for your time.
How do I know if my phone is being picked up by Odin or being flashed?
did the same thing the clockwork partition wiped my internal memory
F**k!
woop guess im going to tmobile in the a.m. and playin the whole
idk what happened it wont turn on
thank god for the 14 day return policy!
I ran into "brick mode" myself 2 nights ago and could not get my phone into download mode. Any possible combo of volume key up/down and power had no effect. Just that phone exclamation point pc icon slowly blinking in the center of the screen. I did finally get it into download mode but it wasn't using any of the previously mentioned methods, so I'll add one more to the growing list to try. This one worked for me after almost 4 hours of experimenting.
BTW....my phone would never display the battery charging image when powered off and plugged in. Just this same annoying image.
Pull the battery. Put it back in. Hold the just the volume down button. Do not hold the power button. Plug in either a wall charger or USB cable. The cable will power up the phone and voila. I was in the download screen.
I also highly recommend the stock ROM from the thread
"[ROM] OFFICIAL T-Mo Vibrant JFD ODIN/Nandroid Backup Images 7/29/10 (Tested/Working)" In Vibrant > Vibrant Android Development
I tried another ROM found out on the internet and ended up with a shell that crashed and restarted every 60 seconds.
For those running into Odin stuck on a message about verifying the file system, I had no luck when the phone used COM3. I suggest moving your USB cable into different ports on your PC. Each new port will "install" a new instance of the phone using different COM ports. COM5 and COM6 both worked as I was reflashing the day away yesterday.

[Q] Xperia X10 won't turn on.

Hi. The phone application was not functioning well and the F/C dialog showed up. I powered off the phone and from that point, the phone won't turn on.
The battery was fully charged before this happened.
When I press the power button, the phone vibrates for half a second, the screen brightens up but does not show anything but a black screen.
I removed SIM and SD cards, removed the battery and performed the above steps but nothing happened.
I also tried to put on the charger to see what's going on. Once I plug the charger, the phone's screen brightens but shows only blank (even without pressing the power button)
When connected to the charger, the green light for charging is on for some minutes, then goes off automatically.
I tried to connect it to the PC, and PC Companion finds the device as usually. It even shows the dialog on the pc screen to mount the device.
I tried a hard reset, but does not work
On some point, the sony logo appeared and then a dialog saying: "sorry process system is not responding". The first time I pressed Force Close and the phone turned off. Immediately after that, the phone turned on and showed the exact message. I pressed "Wait" but nothing happened in the next 15 minutes.
I called Sony's support center and they suggested a software update. Did the process exactly as it should, but again, even after the software update the screen shows nothing but black. It is all the time brightened for some reason.
I tried to turn off the phone for some time by removing the battery, but as soon as I put the battery back on, the phone's screen brightens and stays that way forever.
The phone was functioning perfectly up until this issue. The only application I had installed apart from some games, was AWDLauncher. On the screen I had only a TASK widget and a battery status widget.
The phone is 3 months old and has been always in perfect condition.
ANY help would be appreciated!!!!
Many Thanks
Try to format phone with this method hope it should work as it seems the issue is with OS only ..
http://forum.xda-developers.com/showthread.php?t=717949
Many thanks for the prompt reply. I will try to do so and let you know how it goes!
o0k00l said:
Try to format phone with this method hope it should work as it seems the issue is with OS only ..
Click to expand...
Click to collapse
I tried the steps found in the link you gave me, but I couldn't go any further after step no (5) from the tutorial, as it would require to enable Debugging mode and I cannot access the OS (since the device won't turn on).
Is there a way to format all the contents of the device and have them replaced by running SEUS (as it always says that my device is up to date now)?
Was it this:
http://www.sonyericsson.com/cws/sup.../detailed/updateservice/xperiax10?cc=gb&lc=en
That Sony Ericsson told you to do?
If not, use that.
Download it, follow the steps when it says you have the latest version, press "Install Anyway".
Hope this works.
Hi itTim. thanks for the response
this is what i did but no improvement at all ((
Sounds like you broke your LCD screen somehow.
That would suck because I broke mine and it cost me $200 to fix.
Hi Hypercore.
Yes that could be the problem. The thing is that I always took rally good care of the phone, always carried in a leather pouch and never droped it. How sensitive is this lcd anyway?? Did you notice any cracks on your lcd or was the problem simillar to mine?
Thanks
When you turn on the phone does the lcd backlight turn on?
If so, look for any faint lines of color (usually a hairline size). If you see any of those then your screen is cracked.
the backlight is on, but there are no lines of colour on the lcd screen.
another weird thing is that the green light on the top blinks one or two times every time i put on the battery. even if the phone is off, once I insert the battery turns on automatically after a couple of seconds.
If all else fails you could try to flash back to your original fw with the tools here:
ht tp://forum.xda-developers.com/showthread.php?t=683793
AyDee said:
If all else fails you could try to flash back to your original fw with the tools here:
ht tp://forum.xda-developers.com/showthread.php?t=683793
Click to expand...
Click to collapse
That won't do anything.
I had almost the same issue. Nothing worked. But, when I removed the battery and left it for a day (24h) without it, it just started working again. Still working without issues..
Good luck!
Devtone said:
I had almost the same issue. Nothing worked. But, when I removed the battery and left it for a day (24h) without it, it just started working again. Still working without issues..
Good luck!
Click to expand...
Click to collapse
Phones are very wierd pieces of technology. I once bricked my k610i and that's a phone that's supposed to be impossible to un-brick, but out of nowhere a month or so later i picked it up, hit power and it turned on perfectly. Made no sense at all, but it worked.
Taking the battery out for a long time probably took all the electrical charges from it (kind of like how a computer power supply / monitor can hold power charges) and reset your handset.
Hypercore said:
Phones are very wierd pieces of technology. I once bricked my k610i and that's a phone that's supposed to be impossible to un-brick, but out of nowhere a month or so later i picked it up, hit power and it turned on perfectly. Made no sense at all, but it worked.
Taking the battery out for a long time probably took all the electrical charges from it (kind of like how a computer power supply / monitor can hold power charges) and reset your handset.
Click to expand...
Click to collapse
Indeed. It could be a frozen chip, memory fault, power-regulator and so on.
Hypercore said:
That won't do anything.
Click to expand...
Click to collapse
Ah, debug mode needed- I see now
tasaki said:
I tried the steps found in the link you gave me, but I couldn't go any further after step no (5) from the tutorial, as it would require to enable Debugging mode and I cannot access the OS (since the device won't turn on).
Is there a way to format all the contents of the device and have them replaced by running SEUS (as it always says that my device is up to date now)?
Click to expand...
Click to collapse
if you have done this and did not worked , then it is the LCD.
send it to workshop and check it there.
Guys i Really need the solve of this problem , my xperia has blank screen now without backlight and the phone completely doesn't work . when i put the battery and prees the switch botton it gives me 3 red signals , i've updated and hard reset but it didn't work , and btw the LCD is fine , any idea. did removing the battery worked???? . please answer
After a looooot of time since my latest post, finally my Xperia came back to life. There was a battery failure which means the phone was ok all the time. Weird thing is that the led light showed that the battery was charging ok. I removed the battery and after a lot of time it is working ok again. This was really really odd.
FYI for anyone else that gets this issue.
I just had this for the past hour after trying to change my baseband....could not get it back for anything.
What I did finally try was run another baseband via flash tool, connected to usb and it started flashing....after flash phone powered on again...yeah I agree with everyone, that is freaking scary when it happens.

[Q] Vibrant won't boot - USB appears to be stuck on

I picked up a used Vibrant last week and it initially worked fine. However, it still had 2.1 installed so I decided to update to 2.2 with Kies Mini. After 4 hours of screwing around and with it and much searching of forums, I finally got it upgraded, but something seems to have happened to the phone in the process.
The phone acts like the USB is permanently on, even if no cable is attached. The USB plugged in notification stays on even when the cable is unplugged. After I charge the phone and unplug it, the battery indicator continues to show that it is charging. The main problem is that the phone gets stuck in some kind of loop when the phone is turned off and never truly turns off. Initially, what would happen was that the little loading circle indicator would appear then the battery charging icon would pop up for a moment. However, since there was no cable plugged in, it would disappear. After several seconds of a black screen, the loading circle would come back up. This loop would simply continue over and over. Pulling the battery and putting it back in did nothing; the loop would just start over again the moment the battery was inserted. The phone would not respond to the power button while this loop was going.
At this point, I was still able to get the phone to boot by plugging in the USB cable, waiting until it started to charge (with the green battery icon) and then hitting the power button. This went on for several days. Today, I decided to take the battery out for several hours to see if anything would reset. However, things only got worse. The loading icon still pops up but now the charging icon doesn't come up, even if the USB is plugged in. I just get a loop where the loading circle pops up, disappears, comes back, and so on. I am now also not able to power on the phone with the power button.
I am still able to get into download mode (but not recovery mode) so I flashed everything back to stock using Odin and the instructions on this forum. This does get the phone booted back up, but as soon as I turn it off again everything starts all over.
So now I have a phone that, if it is ever turned off or loses power, has to be reset, wiping everything in the process. Does anyone have any idea how to fix this? Is it some kind of bootloader issue?
Odin, put 2.1 stock rom back.
Like the post before me mentioned, Odin back to stock 2.1
And personally, I'd much rather install stock froyo with ODIN rather than KIES.
Or just use a Custom ROM altogether.
As I mentioned in the original post, I've already restored the phone with Odin several times and it has absolutely no effect. It allows the phone to boot once but as soon as it is turned off again the loop starts over.
mordrid52 said:
As I mentioned in the original post, I've already restored the phone with Odin several times and it has absolutely no effect. It allows the phone to boot once but as soon as it is turned off again the loop starts over.
Click to expand...
Click to collapse
I have heard of KIES updates screwing phones before! I would contact T-mobile and tell them the situation....letting them know its used and had stock T-mo 2.1 and after using KIES to upgrade to 2.2 it screwed your phone.
Eventhough its used and You didnt buy it from them, they would probably fix it for you for free since their update program caused the issue...If it was a stock phone then they will probably fix it.
edit: in your story to them, leave out the part about you using ODIN...i am sure they will call that a void of the warranty.

S3 Reboot Issue

I'm afraid she's dead, Jim.
I've got the SCH 1535, Verizon version, 16 GB, and was running an older version of Cyanogenmod (10.something)
Phone when into the "Samsung display" loop last night. Removed the battery, and tried to boot into recovery mode.
Phone would vibrate when all three buttons were pushed... and then nothing. I'd hold it for several minutes, and it never kicked into the recovery mode.
When I'd release the buttons, it would vibrate and then reboot into the Samsung Display again.
On one occasion, it vibrated and flashed the Samsung logo and the blue text in the upper left corner- but then rebooted into the Samsung Display, where it stayed.
After a few hours, I then moved into trying to boot it into to Download mode. Same response... nada.
Now, it won't respond at all- won't power up, (seemingly) won't take a charge (plugged in, but no light indicated).... Bleh.
I've already ordered a replacement (was shopping for the N6P yesterday, maybe it knew?), but I'm just looking to see if there's a way to get into it long enough to grab some of my data that wasn't backed up or on my SD card.
Thoughts, oh wise Android wizards?
Its CM10.1 man. It might be that your s3 already got old and a part of its hardware suddenly fails (If you only installed CM10.1 and did not tweak the ROM after [i.e editing build.prop]). It's normally happening to a few I9300's everyday. It was yours that was chosen to be taken today.
Jericho Arcelao said:
Its CM10.1 man. It might be that your s3 already got old and a part of its hardware suddenly fails (If you only installed CM10.1 and did not tweak the ROM after [i.e editing build.prop]). It's normally happening to a few I9300's everyday. It was yours that was chosen to be taken today.
Click to expand...
Click to collapse
Yup... good times.
What's interesting is that the computer "recognizes" it when it's plugged in (I get the comforting "ding" when it's connected), but other than that... nothing.

Bootloop/black screen on non-rooted Cubot Power

I bought a Cubot Power at the start of December, and I was quite happy with it for a while. Two days ago, I decided to install Greenify to test it out on a non-rooted phone, but when I tried to restart the phone, during the boot screen the phone froze for a moment and after that I couldn't do anything else other than stare at the black screen. Surprisingly enough, the next day my phone had it's screen on (had to insert PIN from restarting), and got to use it for a couple of hours. Then it froze again, and after that I haven't gotten it to work.
I'm not exactly sure what happened to it, unlike my previous phones it does not vibrate when turning on so it's hard to tell whether it's stuck in a bootloop. But when I do connect it to my PC with an USB cable, my PC starts making the device connect sound, only to disconnect a couple of seconds afterwards. When I open up device manager, I can even see MediaTek driver in there, which disappears with the device disconnection sound. I can't get into recovery, I've tried using the volume up + power button combination, but with no results (screen still remains black).
I've tried to use getdroidtips guide to install stock ROM on my Cubot Power, but no matter which stock firmware version I use, flash tool gives me an error "STATUS_DA_HASH_MISMATCH".
Does anyone have any suggestions what else can I try? It would be a hassle to send it back to get it fixed, as I ordered it from half across the world.

Categories

Resources