Bricked System - Please Help! - Galaxy S III Q&A, Help & Troubleshooting

I tried to flash a googy kernel, and the flash failed. I (apparently wrongly) assumed I since it failed my old kernel was fine and I could just restart the phone....
Now my phone doesn't boot at all, no display, no graphics, nothing. The best I can do is get it to show up as Qualcomm HS-USB QDLoader 9008 in windows.
Is there anything I can do to fix it?

A guess you are in the wrong forum this is I9300 phone .
jje

yep wrong forum, sorry.

Related

huawei s7-721u Need help

I have a s7-721u,after updating rom in sd mode device has bricked and it is in qdloader 9008 now.
Is there any solution or a qfill rom for it?
Need help,thanks
I have the exact same problem but it seems no one knows how to fix it
See here and try to retrace the steps with your device's firmware AND emmcswd archive that usually comes bundled with official firmwares.

[HELP] LG V10 H960A BRICKED, Qualcomm HS-USB QDLoader 9008

Hello everyone,
after putting my phone in download mode, I flashed the wrong kdz, so now it doesn't boot in anyway:
I have no fastboot, no download mode, it does not switch ON.
I found several guides on the internet , but none of them seems to work.
Can you help me? Thanks
eagle93 said:
hello everyone,
after putting my phone in download mode, i flashed the wrong kdz, so now it doesn't boot in anyway:
I have no fastboot, no download mode, it does not switch on.
I found several guides on the internet , but none of them seems to work.
Can you help me? Thanks
Click to expand...
Click to collapse
i have this same problem
Hi,
same issue - Unbrick LG V10 (H960a) stuck in Qualcomm HS-USB QDLoader 9008 mode
Ive searched and find several solutions, buitr not for H960a.
Like:
https://forum.xda-developers.com/tm...ent/debrick-phone-h901-qualcomm-9008-t3440359
Do anybody have IMG for SD card to boot to downloadmode and fix this brick?
Mayby any familiar version wioll work too (Ive tried already H9012j, H81120o, and H901)
This also did not worked
http://www.droidsavvy.com/unbrick-qualcomm-mobiles/
hai friends please help me.. my v10 is F600L but my friend by mis falshed with h961N that one dual sim and my F600L is single sim after flash no network so I tried to falsh back to F600L but my phone dead now after 90% flash.
only vibrate when i press power button
pc also not detecting anything like qhsusb or nothing
no download mode nothing
please any expert here help me...
hope any guy know about it
thanks in advance
Lg v10 h960a
Hi, I have the same problem, could you fix it? Thank you
I'm fighting with my fiends phone for over 3 days now, same as yours 960A. What i did is, try to heat the CPU up, rly rly high, and then try to turn on/fastboot it. If its not working, put it into freezer, and try to boot it inside a freezer. After 2 days i managed to get to fastboot few times, flashed stock firmware and right now im stuck on bootloop, but that is fixable. Just play around with heat, this phone is bricked anyways so dont be scared to take of heat sink and just blow your hair dryer straight to CPU.
xsoft said:
Hi,
same issue - Unbrick LG V10 (H960a) stuck in Qualcomm HS-USB QDLoader 9008 mode
Ive searched and find several solutions, buitr not for H960a.
Like:
https://forum.xda-developers.com/tm...ent/debrick-phone-h901-qualcomm-9008-t3440359
Do anybody have IMG for SD card to boot to downloadmode and fix this brick?
Mayby any familiar version wioll work too (Ive tried already H9012j, H81120o, and H901)
This also did not worked
http://www.droidsavvy.com/unbrick-qualcomm-mobiles/
Click to expand...
Click to collapse
Pls share the lg v10 H9012j.img file pls.

LG D820 (Nexus 5) Hard Brick - Need help, guys!

Hi!
I have nexus 5 (d820)
I've replaced battery and in a time EMMC. But the problem still remains.
The problem:
Before now the phone was continuously rebooting on an on. It does not depends what app I'm in or where I am in OS. But now it's comletely brick) And it doesn't want to boot.
So I have QHSUSB_BULK in device manager and have installed drivers. Now I have Qualcomm HS-USB QDLoader 9008 there. Then I used BoardDiag software and got broken sectors (when writing laf.mbn, boot.mbn, tz.mbn)
rgho.st / 8zDGFMtd4 (Admins, please allow me to post the link here)
The questions:
1. Can I get it working? However I really like nexus
2. Can I may be remap sectors?
3. Can I at least recover my files?
Thanks in advance, people)!

Bricked Samsung S III SGH-I747 (AT&T

Hello all.
I found my old Samsung S III SGH-I747 (AT&T) that I had hard bricked many years ago. The phone won't turn on at all. Can't get into recovery mode or download mode. Just a black screen and the charging light will turn on. I plugged it into my PC to see if I could fix it and too my surprise it came up as Qualcomm device (Qualcomm HS-US QDLoader 9008) in device manager. I found a program called QFIL that also detects it as a Qualcomm device.
Does anyone have or know where to get the proper files to to fix this issue? This QFIL program needs a .mbn file and a .xml file.
If anyone has any other ways that could possibly fix this issue please let me know.
In all honesty I think its buggered and stuck in the state before the factory flashes the os. How you get out of it.. I dont know.
This may help: https://forum.xda-developers.com/showthread.php?t=2525902
AT&T s3 forum is here: http://forum.xda-developers.com/galaxy-s3-att

Lg G5 H850 won't turn on

Hello,
I have huge problem with LG-H850.
I need recover data from this phone.
LGUP can't find it, in device manager is HS-USB QDLoader 9008.
I tried use z3x, axiom process, another programmer for qualcomm and reballing of UFS chip but still nothing.
https://forum.xda-developers.com/lg-g5/how-to/bring-lg-g5-to-life-download-mode-lgup-t3565508 <- it doesn't work
in hydra is like here: https://forum.xda-developers.com/android/help/lg-g5-h850-qualcomm-9008-hydra-error-t4043329
I need make memory dump for data recovery.
Please for help, Regards

Categories

Resources