Screen blink - Galaxy S III Q&A, Help & Troubleshooting

Hello Friends,
I bought SGS3 few months back, it was working fine. yesterday when i was in Contact app screen blinked once (i.e. after viewing a contact and return back to contact list screen goes off and come back within a second), after this i see the blink every time i view a contact.
some time on home screen the wallpaper scrolls left/right a little and come back to normal... I have not done any thing like tweek/flashing/rooting.
is there any issue? or it is usual in all SGS3?
please suggest

Backup data and factory reset . jje

Related

In stock image "Gallery", when zooming a pic, screen goes black

In stock image "Gallery", when zooming a pic, screen goes black .
After the ICS update, the image gallery also suffered a problem. Sometimes while viewing a pic and you double tap to zoom in, suddenly the screen goes black...no pic. Start to zoom back out and the image comes back..zoom in again..image black screen again. This happens with random pics and wont fix itself unless you Force Stop the app in Control panel. It wont always be the same pics..anyone else get this? Its not important, I just wondered if this is just something on my phone..
After updating to the OTA, everyone has problems until they do a factory reset. It clears out all the GB crap that messes it up.
Backup your data and then power off your phone. Take out the battery and put it back in. Then press power and volume down until you see he white screen. Use the volume keys to highlight and power to select "factory reset".
Forgot I wrote this, sorry. Already did a reset long ago as per suggestions by others for other problems since the update. So the problem never fixed itself. Its some crap with ICS. Its annoying because now I keep getting this problem.
Has anyone else experienced this before?
Ok..obviously nobody knows about this. I'm going to take a short video and i'll have it up within a couple days. This photo browser is pissing me off! Is there a better or just as good (FREE) app out there in the market or on XDA? Something that doesnt have this bullsh** problem in it? Thanks ahead of time for any replies.

[Q] Problem when my phone is recovering from Sleep mode

Hi everyone !
I'm new here (and not a native english speaker, so apologies in advance for any grammar mistakes)
Before making this thread, I looked for info here, but I'm not sure for what to search.
I'll try to explain my problem here.
I bought a Galaxy SIII from my provider 3 weeks ago and everything looked fine, till last week.
Some times to time, with no apparent reason or cause, while my phone is on sleep mode, on my desk, or in my pocket, playing music, I have the following problem: when I push the on/off button to wake up my phone, my screen is turning on, taking me to the lock screen.
But, my screen brightness is very low, like set to the minimum.
And when I draw my unlocking pattern, screen goes black.
Bottom buttons are lit and my phone seems to be OK, I can feel haptic feedbacks.
But the screen is black.
If I push the on/off button again, screen stays black and bottom buttons are not lit anymore, as a usual Sleep Mode.
If I push on/off again (depending on how much I wait between 2 on/off):
- My phone awakes from Sleep and takes me again to the unlock screen, brightness still very low. And after the unlocking pattern traced, black screen again
- If I didn't wait enought after putting it into sleep mode, in this case, I don't have to redraw the unlocking pattern. I'm back to my home screen...
for 1/4 of a second, stilll with brightness at the minimum. And screen goes black.
And after a serie on onoffonoff, boom, my screen is back to full and normal brightness and everything is OK.
At the beginning, my phone did that once in a while. I thought at the time ti was after pushing the on/off button while using a CPU/RAM hungry app, my phone struggling to recover....
But now, it's totally random.
Depending on .... I don't know what, I have to do the onoffonoff thing 2, 5, 10, 50 times in a row so my phone can recover from is half comatose.
Yesterday, I could not use my phone for half an hour ...
and if someone calls me, I hear the ringtone, but screen stays black.
I can answer the call (but not knowing who's calling) by sliding on the part of the screen where the slider normally is.
Funny thing is about removing the battery. It doesn't solve my problem.
When I do so, my phone boots, I see the "Samsung Galaxy SIII" boot screen, on low brightness (whih is not normal ...)
After that, I normally have another boot screen with my provider's logo and tone. But screen goes black again (but I still here the tone)
Then I realized it started to happen when my phone proposed me a Samsung update.
I tried to reset my phone to factory settings but it didn't work, the update was still here.
For a while I thought my problem was solved, because my phone behaved normally for 3 or 4 hours, without problem.
But it came back.
I found on the internet several "almost-same-problems" without proposed solutions.
Like checking if the proximity sensor was blocked by a protective transparent plastic sheet, or a case.
I tried to to remove mine.
Didn't work.
Some people said it was linked to their phone trying to acquire a wifi network.
My wifi on or off, withiin or without the range of a wifi router didn't work ...
I tried to note things down about what I did, when, how, app launched before the problem appears.
I checked battery info (temp, voltage, etc).
No pattern emerged.
So.
Hs anyone of you enountered the same problem ?
Do you have ideas, solutions I can use ?
Or maybe a voodoo prayer ?
I could sent it back to my provider which will bounce it back to Samsung. But it will take ages (3 to 4 weeks ...) :'(
Thanks in advance !
do a factory reset, go completely stock
if that doesn't help, send it in
Glebun said:
do a factory reset, go completely stock
if that doesn't help, send it in
Click to expand...
Click to collapse
That's what I did.
I tried by going into the Parameters menu, and reseting.
I tried by booting my phone with Vol+ / Home / Power buttons to access a console mode and do a wipe data/reset.
The problem is that my phone got an update like one week ago from a 4.?.? to 4.1.2.
And even with a reset, my phone reboot with the 4.1.2 version, which seems to cause this problem.
Or maybe not, but I can't be sure.
As I said, after a factory reset I did yesterday, everything went well for 3 or 4 hours and the problem reappeared.
send it to the service

Freakish Sudden Issue with AT&T Note...

This phone has never been modified, no custom ROMS, never rooted, using the latest OS from AT&T ...
And today, for whatever reason, when making originating a phone call, and once I've hit "dial" ... the phone screen goes completely black except for the status bar at the top (the one you can swipe down). I'm saying that whereas usually, after hitting "dial" and as the phone dials, you can actually see a screen full of information (hang up botton, number/name of who your dialing, etc.) ... in this case and now, there is just a black screen.
Though there is a black screen (other than the status bar at top), I can still hear the phone ring and even have a conversation should somebody answer. But when the call is over (the person on the other end has to end the connection because I have no screen interface to do such), the screen remains blank (other than the status bar at top) and none of the bottom, permanent keys are operative either ("home" / "back" / settings / etc.). To get back to the home screen, I have to pop the battery and re insert it and re start the phone. But even then, it's acting weird: when booting, at the "Reimagine Possilbe" screen (I think that's what it says) it hangs there for about 45 seconds (usually only about 5 when functioning correctly) and will eventually end up at the home screen.
But if I originate a call, the cycle repeats.
I've completely reset the phone to factory defaults at least three times, formatted the USB storage and the whole nine yards but it remains glitched as described above.
...
So... has anyone seen/heard of this?
I'm thinking of just warrantying the phone as it's only about 5 months and I figure AT&T should have no issue as it's such a replicable problem and it certainly doesn't seem to be software related as it's completely stock and multiple factory resets have not worked but wanted to put a line out here first to see if anyone else has experienced this.
Thanks in advance for any information.
Best,
Joel.
I think the network is fugazi right now, as I had issues with the phone, and read about another user having same troubles. I'd give it a little time.
rangercaptain said:
I think the network is fugazi right now, as I had issues with the phone, and read about another user having same troubles. I'd give it a little time.
Click to expand...
Click to collapse
I sure hope so. Even though I've reset the phone (which sucks) ... I'd prefer that over having to go to the store and all...
Odd that a network problem could cause such, though ....
Thanks for the word ...
Best.
.joel
Just a llittle update ...
I changed the "Proximity Sensor" to OFF and now the normal iin-call screen appears but it never goes away, which can be problematic.
In general, I've always had the proximity sensor set to ON as this allows the in-call screen to blank after a few seconds (complete blank with no status bar at top) and then reappear when I remove the phone from my ear.
But when I re enable the proximity sensor, now ... the screen blanks immediately (excepting the status bar at the top) and never comes back ... even after my call recipient ends the call ...
I'm just gonna warranty at at the local service center; at this point (two days now with all my friends AT&T phones working fine) I'm pretty sure something is glitched with the internal sensor that manages the proximity settings ...
Thank God for warranty.

[Q] Black screen when accessing Camera-> Pixellated screen instead of Nokia logo

Hi All,
I had an issue with my phone giving a black screen when accessing the camera application till Saturday.
I tried the volume down+ power option, but to no avail. Reset the phone after backing up the data.
Still camera not working, it was blurry sometimes and sometimes the bottom icons worked to switch to the front which was working fine.
I was using the phone as it is till today as I was not able to give it to service center today and wanted to give it tomorrow but sometime back, the phone went into a pixellated screen and the phone wont give any video.
whenever I restart the phone, instead of the nokia logo, it gives a completely pixellated screen.
Not sure what to do. Looks like only option remaining is to take it to a Nokia Care center here in hyderabad.
Any suggestions???
Regards,
Bhaskara
twitter.com/bhaskarav
.
Sounds like a hardware issue. Not something that could be fixed with a wipe or anything. Send it back, that is what a warranty is for. See if they can give you a loan phone while they have yours. Most providers will do that if you have a warranty.

[Q] N9006 Note 3 problem touch-solve for time, return problem

Dear friends, see this, see in the youtube:
watch?v=ixWozCI8sek
I activated the phone in their own settings of android to show screen touches and strokes that you can see in the video above, and installed YAMTT app to better show the problem.
The Problem on mobile touch in the middle of the screen there is a track that is not recognized touch, but if I press the screen sinking, she returns to work temporarily, and now recognizes the touch - but after a few minutes the problem back and touch is not recognized again.
The screen is perhaps dished up, and when I press down her back to be in contact with the part of the cell that recognizes the touch, but with time the screen should be getting back dished up (this is my guess, not i'm sure).
Detail, not always when I press is running, sometimes I press the screen to the center of the touch again be recognized, but it seems that the phone is registering touches alone.
What would be a solution, and change the screen (it does not mean that changing the screen the problem solved), want to try other alternatives before changing the screen.
Perhaps heating up the screen with hot air, in theory it will expand and become more pliable, and then if I press down the center panel of the phone with something for a while until it cools, in theory the screen would remain indefinitely, and if that is the problem could solve -
Anyone have any thoughts, has been there?
Thanks in advanced!

Categories

Resources