One of my customer wrongly flashed I9100G with I9100 Firmware and phone stuck on yellow triangle, Then i flashed it with Stock ROM I9100G 4.2.1 But Now it stuck on Recovery, Every time i power on the phone display yellow triangle and it goes in recovery mode. Is there any solution, i tried all solutions on xda but none of them help me, Please give me fresh solution.
Flash stock 4.1.2 with odin
Sent from my GT-I9100 using xda app-developers app
Dear lord!
There is a Q&A section if you'd bothered to actually look. Not hard to find.
I reckon mods will close this thread soon enough, so i recommend making a new thread but in the Q&A section.
Related
i tried rooting my samsung galaxy s 2 gt i9100G, i flashed the CF-Root-SGS2_XX_OXA_KG6-v4.1-CWM4 kernel using odin and everything was fine, when my phone restarted it was on the start screen with the yellow triangle at the bottom, i have rooted other samsung galaxy s2 GT-I9100, but not the one with GT-I9100G, any idea what i should do now? i can go into download mode, but just cant start up
its a 1900 G model you need to check that the kernel you installed is compatible with the model G first .
jje
Check this thread out for links to flash back the stock firmware with Odin. I did see a link posted for a chinese rooted kernel there as well, but be wary. You don't want a brick. Just concentrate on getting back stock working first, then go from there.
http://forum.xda-developers.com/showthread.php?t=1276105
I9100G same as I9100?
Sent from my GT-I9100 using xda premium
Do you remember your firmware so i can look for it?
Hello gurus,
I got a SGS2 I9100G. I tried to flash the CF-Root kernel in order to root but it failed.
I then went to download mode and tried to install Litening rom.
it always fail at the modem part.
I am so stupid that I did not first check the firmware version already installed !
I am now trying to re-install a stock version and none is working.
I tried vilain rom 1 (supposed to wipe everything) it completes with no error , but it stays stuck at the writing Samsung I9100G . (not the Samsung logo).
I can not go into the recovery mode.
I tried to flash a kernel and things got worse... now I have the 2 computers screen.... Please helppppppppppppppp
Thanks
Ok looks like what you've done is flash software meant for the I9100 model and not the I9100G.
Search through the threads till you find threads specifically about the G model. Read and read a lot. Not joking...read a lot.
Your gonna need Odin, gonna need to boot into download mode and gonna need to flash firmware for the I9100G model.
Hope this points you in the right direction.
Sent from my GT-I9100 using XDA App
You think that flashing a firmware for I9100G will solve the issue ?
thanks
pierreammoun said:
You think that flashing a firmware for I9100G will solve the issue ?
thanks
Click to expand...
Click to collapse
Yes. The I9100 and the I9100G are two different devices.
Heya guys!
I am a complete noob,and obv didn't spent enough time understanding the process,but please help and I promise I won;t be that stupid ;p
What I did :
Install Drivers,Odin,download CF-Root-SGS2_XX_OXA_LPH-v5.2-CWM5 kernel which seemed like the one for my phone.
Flashed it and it looked like there was no error,but the phone didn't restart automatically. It can go into download mode,but I am not sure what to do from there,completely lost and panicking. And the worst thing I forgot to do a backup.
Unleash the flame but please help. :fingers-crossed:
What you installed was probably not for your device and hence the bootloop.
Download a stock firmware for the i9100P model from sammobile.com (4.0.3 to avoid the emmc bug) and flash via Odin. That should get your device back to life to start with.
Once you've done so follow the procedure in this link to get rooted
http://forum.xda-developers.com/showthread.php?t=1501719
Good luck
Sent from my GT-I9100 using xda app-developers app
Download and flash stock I9100p firmware but you can flash normal i9100 rom but you will lose nfc.
Sent from my GT-I9100 using Tapatalk
HELLO ALL,
I BOUGHT AN SGSIII GT-I9300 IN CHINA RUNNING ANDROID 4.0.4 AND TRIED TO FLASH A HEBREW ROM ON IT THROUGH ODIN 3.0.4. THE WHOLE PROCESS HAPPENED BUT AT THE END THE ODIN REPORTED FAIL (IT DID SO WITH ANY OTHER ROM I TRIED AS WELL, NOT ONLY THE HEBREW ONE) SO I INSTALLED cCF ROOT ON IT AND TRIED TO FLASH A ROM THROUGH THE RECOVERY AND AGAIN, THE PROCESS FINISHED BUT WHEN IT REBOOTED THE PHONE GOT STUCK ON THE OPENNING SCREEN SHOWING "SAMSUNG GALAXY III" AND IT JUST WON'T BUDGE FROM THERE...
I CAN STILL GET INTO RECOVERY & DOWNLOAD MODES BUT I HAVE NO IDEA WHAT TO DO NOW!
PLEASE I NEED YOUR HELP 'CAUSE THE PHONE IS JUST USELESS NOW.
THANKS FOR ANY ASSITANCE YOU CAN GIVE ME
GUY
What model phone >>> look under the battery in case its yet another not a I9300 .
Should read .
SSN GT-I9300 GSMH
jje
hi, it does read i9300gsmh... what should i do?
Sent from my GT-I9100 using xda app-developers app
hi,
I need to return to stock because am facing alot of problem with custom rom.
plz guide me to do it safe am searched alot but confused about the steps so help me plz.
am on PACMAN 4.4.2 rom
I appreciate any help ^_^
Sent from my GT-I9100G using XDA Premium 4 mobile app
So you obviously missed the thread stickied near the top of Q&A titled 'Flash stock firmware' then ?
The only difference is you obviously need to get I9100G firmware from Samfirmware, not I9100.
This is basics, you should already know this stuff before you start flashing custom roms, and you're certainly not going to be spoonfed it.
MistahBungle said:
So you obviously missed the thread stickied near the top of Q&A titled 'Flash stock firmware' then ?
The only difference is you obviously need to get I9100G firmware from Samfirmware, not I9100.
This is basics, you should already know this stuff before you start flashing custom roms, and you're certainly not going to be spoonfed it.
Click to expand...
Click to collapse
last question :
I need to install 4.1.2 france.
the steps like this,flashing stock kernal through recovery ,unroot phone then flashing through odin stock firmware.
right or there other things.
thanks man I appreciate your response
Sent from my GT-I9100G using XDA Premium 4 mobile app
You REALLY should know this....
1) no need to flash a separate kernel.
2) no need to unroot.
Flash the correct firmware via Odin and your phone will be in an "as new, out of the box" condition.....
That's ALL you need to do.
Sent from my Markox powered KitKatted S2