Related
Well i ma new on this and dont know what to do. I have updated my cellphone to the newest oficial from samsung mobile but i want to root it now but cant find the nesesary files to do it there is a image of the android information any help is welcome
hebyo1990 said:
Well i ma new on this and dont know what to do. I have updated my cellphone to the newest oficial from samsung mobile but i want to root it now but cant find the nesesary files to do it there is a image of the android information any help is welcome
Click to expand...
Click to collapse
Flash Siyah kernel from www.gokhanmoral.com.. the latest version is 3.5.2...... download the tar file on your pc, search for Odin (PC software), and download it.
Make sure your device has USB debugging enabled.
Reboot into download mode. To do it, turn off your phone, then hold power button + home button + volume down simultaneously. Connect your phone to your PC via cable.
On your PC, make sure kies isn't running (check from task manager and kill all services related to it), open Odin, there should be a yellow highlight which will indicate your phone has been detected. Only f.reset and auto reboot should be ticked, NOTHING ELSE. Click the PDA button and navigate to your siyah kernel .tar file.
Flash and have fun
Edit: you can find Odin attached at the end of the first post of this thread: http://forum.xda-developers.com/showthread.php?p=14283342
Just download it on your PC. No need to read that thread.
Hope all goes well.
Sent from my GT-I9100 using xda app-developers app
hebyo1990 said:
Well i ma new on this and dont know what to do. I have updated my cellphone to the newest oficial from samsung mobile but i want to root it now but cant find the nesesary files to do it there is a image of the android information any help is welcome
Click to expand...
Click to collapse
rooting guide
http://forum.xda-developers.com/showthread.php?t=1501719
Spiralzz said:
Flash Siyah kernel from www.gokhanmoral.com.. the latest version is 3.5.2...... download the tar file on your pc, search for Odin (PC software), and download it.
Make sure your device has USB debugging enabled.
Reboot into download mode. To do it, turn off your phone, then hold power button + home button + volume down simultaneously. Connect your phone to your PC via cable.
On your PC, make sure kies isn't running (check from task manager and kill all services related to it), open Odin, there should be a yellow highlight which will indicate your phone has been detected. Only f.reset and auto reboot should be ticked, NOTHING ELSE. Click the PDA button and navigate to your siyah kernel .tar file.
Flash and have fun
Edit: you can find Odin attached at the end of the first post of this thread: http://forum.xda-developers.com/showthread.php?p=14283342
Just download it on your PC. No need to read that thread.
Hope all goes well.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
neerajganga said:
rooting guide
http://forum.xda-developers.com/showthread.php?t=1501719
Click to expand...
Click to collapse
thanks both of you at final i think will instal a new rom even with the guide u gave cant install the program thanks anyway
i have s duos s7562 phone....rooted...the problem is im stuck on boot animation....
i already reset my phone but nothing happen im still in bootanimation...
last thing i remember is i change the 'LCD density' in ROM toolbox lite..hehehe ...and when i reboot it...stuck on bootanimation...
im planing to repair it to samsung tech but i want to know if someone know the solution..
thnks.
NHOman14 said:
i have s duos s7562 phone....rooted...the problem is im stuck on boot animation....
i already reset my phone but nothing happen im still in bootanimation...
last thing i remember is i change the 'LCD density' in ROM toolbox lite..hehehe ...and when i reboot it...stuck on bootanimation...
im planing to repair it to samsung tech but i want to know if someone know the solution..
thnks.
Click to expand...
Click to collapse
You can flash the original firmware using odin search in xda or google
thnks but how??
sangalaxy said:
You can flash the original firmware using odin search in xda or google
Click to expand...
Click to collapse
can you tell me the exact ways to do that...
thnks.
NHOman14 said:
can you tell me the exact ways to do that...
thnks.
Click to expand...
Click to collapse
download your firmware from Samsung-updates.com or sammobiles.com
download kies or Samsung mobil drivers and install close kies after install(confirm)
download odin and start it place the pda modem csc files according to your firmware if it is a single file place it in pda
switch off your phone then press vol down+hom+power button you will get a screen press vol up for downloading connect it to pc
odin will show the com port connected no start it will finish in 3 min
phone will restart now it is good that you wipe data and cache from recovery mod
also without flashing you can try aroma fm and try to edit the build.prop
check arom fm here http://forum.xda-developers.com/showthread.php?t=1646108
install it in cwm go to system and edit build.prop you will find a line with lcd density there change it to your correct density that will do
nice!...
sangalaxy said:
download your firmware from Samsung-updates.com or sammobiles.com
download kies or Samsung mobil drivers and install close kies after install(confirm)
download odin and start it place the pda modem csc files according to your firmware if it is a single file place it in pda
switch off your phone then press vol down+hom+power button you will get a screen press vol up for downloading connect it to pc
odin will show the com port connected no start it will finish in 3 min
phone will restart now it is good that you wipe data and cache from recovery mod
also without flashing you can try aroma fm and try to edit the build.prop
check arom fm here http://forum.xda-developers.com/showthread.php?t=1646108
install it in cwm go to system and edit build.prop you will find a line with lcd density there change it to your correct density that will do
Click to expand...
Click to collapse
gonna try it...thnks a lot!!!...
not flashing recovery...
sangalaxy said:
download your firmware from Samsung-updates.com or sammobiles.com
download kies or Samsung mobil drivers and install close kies after install(confirm)
download odin and start it place the pda modem csc files according to your firmware if it is a single file place it in pda
switch off your phone then press vol down+hom+power button you will get a screen press vol up for downloading connect it to pc
odin will show the com port connected no start it will finish in 3 min
phone will restart now it is good that you wipe data and cache from recovery mod
also without flashing you can try aroma fm and try to edit the build.prop
check arom fm here http://forum.xda-developers.com/showthread.php?t=1646108
install it in cwm go to system and edit build.prop you will find a line with lcd density there change it to your correct density that will do
Click to expand...
Click to collapse
hi sir...is there video in doing that??..bcause i dont know what file should i use...
and another problem is: i cannot flash my recovery... so i cant do the two ways you give...
NHOman14 said:
hi sir...is there video in doing that??..bcause i dont know what file should i use...
and another problem is: i cannot flash my recovery... so i cant do the two ways you give...
Click to expand...
Click to collapse
-first download stock rom as per your region from here http://samsung-updates.com/device/?id=GT-S7562
-then download odin from here http://www.mediafire.com/?p83ya3h8smy19m6
-start odin place the stock rom on pda of odin (if it is single file)
-switch off your phone
-press voldown+home+power button to enter to download mode
-then press vol up to go to download
-connect your mobile to pc odin will show the port connected
-press start wait for finish and a pass in odin
P.S you need to install Samsung drivers inorder to recognize your device or simply install kies
- close kies before starting odin else it will not work properly
thnks
thnks your sir for helping me...i appreciate your help to me...
thnks.
gonna try it...
what if ?..
sir..what if i use the file:
Samsung-Updates.com-KERNEL-GT-S7562-XTE-S7562XXBMD2-1365752402.tar
can i use the same procedure you gave to me??
thnks.
hi
sangalaxy said:
-first download stock rom as per your region from here http://samsung-updates.com/device/?id=GT-S7562
-then download odin from here http://www.mediafire.com/?p83ya3h8smy19m6
-start odin place the stock rom on pda of odin (if it is single file)
-switch off your phone
-press voldown+home+power button to enter to download mode
-then press vol up to go to download
-connect your mobile to pc odin will show the port connected
-press start wait for finish and a pass in odin
P.S you need to install Samsung drivers inorder to recognize your device or simply install kies
- close kies before starting odin else it will not work properly
Click to expand...
Click to collapse
sir..what if i use the file:
Samsung-Updates.com-KERNEL-GT-S7562-XTE-S7562XXBMD2-1365752402.tar
can i use the same procedure you gave to me??
thnks.
NHOman14 said:
sir..what if i use the file:
Samsung-Updates.com-KERNEL-GT-S7562-XTE-S7562XXBMD2-1365752402.tar
can i use the same procedure you gave to me??
thnks.
Click to expand...
Click to collapse
yes you can use the same procedure place it in pda
Hello.
I cand find my s5830i in odin. I use the cable in download mobe but my pc have a messege to write . "Usb device not recognised" why my pc cant find my ace? I istall and unintsall kies smasung drivers and odin many, many times and I do all thins in win 7 ,8.1 and xp . I use for all this 2 computers. I have use odin again and I have not any problems before. Can anybody help me?
manos_mand said:
Hello.
I cand find my s5830i in odin. I use the cable in download mobe but my pc have a messege to write . "Usb device not recognised" why my pc cant find my ace? I istall and unintsall kies smasung drivers and odin many, many times and I do all thins in win 7 ,8.1 and xp . I use for all this 2 computers. I have use odin again and I have not any problems before. Can anybody help me?
Click to expand...
Click to collapse
It's usually the drivers. Please reinstall them again and try to see if your device can recognize it. Also make sure the usb cable is a working one. Do post the results. Hope I Helped
download latest samsung usb drivers, just search for it in google, in case you are using the latest version of Odin, i attached Odin3 v1.84 i've been using with my Ace-i since the latest version of Odin doesn't recognize my phone [silly really]
Just download a Stock ROM if you're device is bricked and do as follows
1. Run as Admin
2. locate .pit file [included in .zip file]
3. set proper files
MODEM = PHONE
CSC = CSC
PDA = PDA
4. Boot Ace-i to Odin / Download Mode [Vol Up + Vol Down + Power]
5. Press Volume Up
6. Flash
7. Wait patiently [it took seconds for me to flash Stock ROM]
8. Reboot Device
now you're good
Hit Thanks if i helped
xlSKYFiRElx said:
download latest samsung usb drivers, just search for it in google, in case you are using the latest version of Odin, i attached Odin3 v1.84 i've been using with my Ace-i since the latest version of Odin doesn't recognize my phone [silly really]
Just download a Stock ROM if you're device is bricked and do as follows
1. Run as Admin
2. locate .pit file [included in .zip file]
3. set proper files
MODEM = PHONE
CSC = CSC
PDA = PDA
4. Boot Ace-i to Odin / Download Mode [Vol Up + Vol Down + Power]
5. Press Volume Up
6. Flash
7. Wait patiently [it took seconds for me to flash Stock ROM]
8. Reboot Device
now you're good
Hit Thanks if i helped
Click to expand...
Click to collapse
I have use odin again. I have experience with that. LoL
*I have allready test it with 3a cables
manos_mand said:
I have use odin again. I have experience with that. LoL
*I have allready test it with 3a cables
Click to expand...
Click to collapse
Are you sure you have the latest drivers?
mahithm said:
Are you sure you have the latest drivers?
Click to expand...
Click to collapse
For odin yes.
For samsung drivers not.
Can you give me a link.
manos_mand said:
For odin yes.
For samsung drivers not.
Can you give me a link.
Click to expand...
Click to collapse
You can download all the drivers from the useful guide by @brijeshep. Head to the "How to install Stock Firmware?" part of the guide to access all the necessary parts of the download. Here is the link,
Know your Device:Galaxy Ace GT-S5830i ~Root~Odin~CWM~ROM LIST
Do post the result. Hope I Helped
manos_mand said:
I have use odin again. I have experience with that. LoL
*I have allready test it with 3a cables
Click to expand...
Click to collapse
Here's the www.4shared.com/rar/YEW-Bh1S/Samsung_Galaxy_Ace_GT-5830_USB.htm?locale=en
Press Thanks If I Helped...
Sk.vignesh said:
Here's the www.4shared.com/rar/YEW-Bh1S/Samsung_Galaxy_Ace_GT-5830_USB.htm?locale=en
Press Thanks If I Helped...
Click to expand...
Click to collapse
Thenx a lot ..
But if all this not work? What I can do?
manos_mand said:
Thenx a lot ..
But if all this not work? What I can do?
Click to expand...
Click to collapse
So did it work?
mahithm said:
So did it work?
Click to expand...
Click to collapse
No work
hi first uninstall kies and
try Samsung drivers package and then restart the pc ..
now download different version of odin and try ..it Will recognised ...
if error persists explain the type of error showing on the display ...
Sk.vignesh said:
hi first uninstall kies and
try Samsung drivers package and then restart the pc ..
now download different version of odin and try ..it Will recognised ...
if error persists explain the type of error showing on the display ...
Click to expand...
Click to collapse
the error is "usb device not recognised"
i have install and uninstall many times kies and drivers.
Can i install stock rom from CWM or stock recovery?
anything other of odin?
manos_mand said:
the error is "usb device not recognised"
i have install and uninstall many times kies and drivers.
Can i install stock rom from CWM or stock recovery?
anything other of odin?
Click to expand...
Click to collapse
Sadly you can't install stock rom from recovery
manos_mand said:
the error is "usb device not recognised"
i have install and uninstall many times kies and drivers.
Can i install stock rom from CWM or stock recovery?
anything other of odin?
Click to expand...
Click to collapse
Why to install many times kies, doesn't required
As i see that your device is not recognised by the drivers ,
So now download PDA net drivers (search it on google )
After downloading and installing
Just connect your device to your PC and wait for a min to detect ( you ll get to see in Task Bar right corner icon)
Then Open Odin and try the rest.
Hitesh2626 said:
Why to install many times kies, doesn't required
As i see that your device is not recognised by the drivers ,
So now download PDA net drivers (search it on google )
After downloading and installing
Just connect your device to your PC and wait for a min to detect ( you ll get to see in Task Bar right corner icon)
Then Open Odin and try the rest.
Click to expand...
Click to collapse
new messege for me from PdaNet
error...
"Please make sure your phone is attached to the computer and usb debugging is enabled on the phone"
I am sure ...
manos_mand said:
new messege for me from PdaNet
error...
"Please make sure your phone is attached to the computer and usb debugging is enabled on the phone"
I am sure ...
Click to expand...
Click to collapse
Before getting brick , your usb socket was working fine ?
Your PC was detecting your device ?
Better to give your device to service center .
Hitesh2626 said:
Before getting brick , your usb socket was working fine ?
Your PC was detecting your device ?
Better to give your device to service center .
Click to expand...
Click to collapse
i format my coputer and then i brick my device!
before fomat it work fine.... then not
i mast uninstall kien?
i mast have install only pda net and samsung drivers install?
Hitesh2626 said:
Before getting brick , your usb socket was working fine ?
Your PC was detecting your device ?
Better to give your device to service center .
Click to expand...
Click to collapse
i have somthing now!!!
i flash a kernel nad i can get in the fierst mobile rom.
but i can flash anything other. i i flash other rom it stop at samsung logo!
if i flash again this kernel i get in this fierts rom!
nothing new from debugging
manos_mand said:
i have somthing now!!!
i flash a kernel nad i can get in the fierst mobile rom.
but i can flash anything other. i i flash other rom it stop at samsung logo!
if i flash again this kernel i get in this fierts rom!
nothing new from debugging
Click to expand...
Click to collapse
Ok so you now your on Stock Rom , so just now get into recovery > flash CWM > and take Backup
Then reboot your phone, after again get into recovery mod (e3 red one ) and do wipe data/cache then Reboot your device , After doing all , then flash custom Rom which ever you wanted.
Hi All,
Need some help. My Samsung S3 mini i2800L was flashed with the wrong firmware in an attempt to upgrade to Jellybean 4.2.2 using odin and it failed . It remained in download mode and I did a battery pull ,now the phone is absolutely dead. Black Screen for all the following:Recovery Mode and Download Mode .The phone wont power on at all. The only sign of life , is when I plugged into my girl friend's Toshiba laptop via usb cable and it searched and installed the drivers.In addition Windows makes a sound when the device is plugged in and unplugged, but is not being recognized by Kies or Odin. I also tried a USB JIG with no success.
Is there any debrick file that I can use for to place on my SD card and attempt to boot from SD, or is JTAG the only option left?
yes!!! you can UNBrick it!!!
OK ... good news for you is it can still be read by the comp when connected (prompts by audio signal) ... it wont take more than 2 min to unbrick your phone... tell me have if you have a stock ROM available for your device?
unbrick Samsung galaxy s3 mini
omkarfrozen said:
OK ... good news for you is it can still be read by the comp when connected (prompts by audio signal) ... it wont take more than 2 min to unbrick your phone... tell me have if you have a stock ROM available for your device?
Click to expand...
Click to collapse
Yes I have downloaded a stock ROM from the internet that can be used. My phone is unlocked so I just downloaded a open firmware , please guide me on the steps required and thanks for responding BTW.
Leon bernard said:
Yes I have downloaded a stock ROM from the internet that can be used. My phone is unlocked so I just downloaded a open firmware , please guide me on the steps required and thanks for responding BTW.
Click to expand...
Click to collapse
have you downloaded SP flash tool along with it??? if not then search for that tool on needrom website... now turn off your phone by removing the battery... now open the SP flash tool and select the Scatter-Loading file present in your stock ROM folder... now click download button... then quickly connect your phone via USB... wait for 5 min ... you will get a message box with green circle and you are done!!! use your phone as you used to earlier...
will try it
omkarfrozen said:
have you downloaded SP flash tool along with it??? if not then search for that tool on needrom website... now turn off your phone by removing the battery... now open the SP flash tool and select the Scatter-Loading file present in your stock ROM folder... now click download button... then quickly connect your phone via USB... wait for 5 min ... you will get a message box with green circle and you are done!!! use your phone as you used to earlier...
Click to expand...
Click to collapse
Wow. Im going to try this when I reach home from work today, I will let you know if it works. Thanks a million
how to access scatter loading file
Leon bernard said:
Wow. Im going to try this when I reach home from work today, I will let you know if it works. Thanks a million
Click to expand...
Click to collapse
Hi ,
So I have the stock rom but its in md.5 format so I cant access the directories. Is their anyway I can convert it so I can access the scatter loading file ?
omkarfrozen said:
have you downloaded SP flash tool along with it??? if not then search for that tool on needrom website... now turn off your phone by removing the battery... now open the SP flash tool and select the Scatter-Loading file present in your stock ROM folder... now click download button... then quickly connect your phone via USB... wait for 5 min ... you will get a message box with green circle and you are done!!! use your phone as you used to earlier...
Click to expand...
Click to collapse
Hi ,
So I have the stock rom but its in md.5 format so I cant access the directories. Is their anyway I can convert it so I can access the scatter loading file ?
Leon bernard said:
Hi ,
So I have the stock rom but its in md.5 format so I cant access the directories. Is their anyway I can convert it so I can access the scatter loading file ?
Click to expand...
Click to collapse
OK if you have stock ROM in md5 then follow these steps
1) copy the md5 file on desktop
2. Download Odin 3.07
3. Switch off your phone and boot Galaxy S3 Mini I8200L into Download
Mode by pressing and holding the Volume Down+Home+Power buttons
(long press until the boot screen appear), now press Volume Up key to
proceed to Download Mode .IN CASE IT doesn't WORK TRY EVERY COMBINATION SO AS TO ACHIEVE 6TH STEP... IF NOTHING WORKS THEN JUST CONNECT THE PHONE WITHOUT PRESSING ANY COMBINATIONS...
4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe
file as an administrator (Right click on the .exe file and click on Run as
administrator)
5. Now connect your Galaxy S3 Mini I8200L to your computer via USB
cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at
ID:COM section and “Added!” text at the message box. This means your
device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are
checked.
8. Now, extract the downloaded firmware .zip file, you’ll find a firmware file
with extension .tar.md5
9. In Odin screen, click on PDA button and select the firmware file with
.tar.md5 extension (The firmware file look something like:
I8200LXXDLJ5_I8200LODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few
moments.
11. Once completed, you would see “PASS!” message in ID:COM port having
green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish.
omkarfrozen said:
OK if you have stock ROM in md5 then follow these steps
1) copy the md5 file on desktop
2. Download Odin 3.07
3. Switch off your phone and boot Galaxy S3 Mini I8200L into Download
Mode by pressing and holding the Volume Down+Home+Power buttons
(long press until the boot screen appear), now press Volume Up key to
proceed to Download Mode .IN CASE IT doesn't WORK TRY EVERY COMBINATION SO AS TO ACHIEVE 6TH STEP... IF NOTHING WORKS THEN JUST CONNECT THE PHONE WITHOUT PRESSING ANY COMBINATIONS...
4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe
file as an administrator (Right click on the .exe file and click on Run as
administrator)
5. Now connect your Galaxy S3 Mini I8200L to your computer via USB
cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at
ID:COM section and “Added!” text at the message box. This means your
device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are
checked.
8. Now, extract the downloaded firmware .zip file, you’ll find a firmware file
with extension .tar.md5
9. In Odin screen, click on PDA button and select the firmware file with
.tar.md5 extension (The firmware file look something like:
I8200LXXDLJ5_I8200LODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few
moments.
11. Once completed, you would see “PASS!” message in ID:COM port having
green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish.
Click to expand...
Click to collapse
Sigh , unfortunately odin is not detecting my phone at all. Remember that the phone is completely dead, which means it cant power on or go any mode . I think the SP Flash tool would work but I need the scatter file
Leon bernard said:
Sigh , unfortunately odin is not detecting my phone at all. Remember that the phone is completely dead, which means it cant power on or go any mode . I think the SP Flash tool would work but I need the scatter file
Click to expand...
Click to collapse
Download Samsung mobile drivers... Because you had said your friends laptopts prompts when you connect your mobile to his laptop. So remember 1thñg your phone is not completely dead yet. try if flash ROM from his laptop
omkarfrozen said:
Download Samsung mobile drivers... Because you had said your friends laptopts prompts when you connect your mobile to his laptop. So remember 1thñg your phone is not completely dead yet. try if flash ROM from his laptop
Click to expand...
Click to collapse
Ok so update: I downloaded Keis and installed all drivers. I recognized now that the phone is connecting as EMEI on PC. I clicked on it uninstall the drivers and re install it , but ODIN nor Keis still does not recognize phone , only computer recognizes phone as EMEI. Let me know your views.
Leon bernard said:
Ok so update: I downloaded Keis and installed all drivers. I recognized now that the phone is connecting as EMEI on PC. I clicked on it uninstall the drivers and re install it , but ODIN nor Keis still does not recognize phone , only computer recognizes phone as EMEI. Let me know your views.
Click to expand...
Click to collapse
get your Samsung usb drivers from here developer.samsung .com /board/download.do?bdId=0000000700&attachId=0000000001 (remove the spaces in between). give me some time so that I can find scatter file for your phone.
omkarfrozen said:
get your Samsung usb drivers from here developer.samsung .com /board/download.do?bdId=0000000700&attachId=0000000001 (remove the spaces in between). give me some time so that I can find scatter file for your phone.
Click to expand...
Click to collapse
drivers downloaded and installed. I await the scatter file. thanks for your efforts .
Leon bernard said:
Hi All,
Need some help. My Samsung S3 mini i2800L was flashed with the wrong firmware in an attempt to upgrade to Jellybean 4.2.2 using odin and it failed . It remained in download mode and I did a battery pull ,now the phone is absolutely dead. Black Screen for all the following:Recovery Mode and Download Mode .The phone wont power on at all. The only sign of life , is when I plugged into my girl friend's Toshiba laptop via usb cable and it searched and installed the drivers.In addition Windows makes a sound when the device is plugged in and unplugged, but is not being recognized by Kies or Odin. I also tried a USB JIG with no success.
Is there any debrick file that I can use for to place on my SD card and attempt to boot from SD, or is JTAG the only option left?
Click to expand...
Click to collapse
follow this brick
Help me too
Leon bernard said:
drivers downloaded and installed. I await the scatter file. thanks for your efforts .
Click to expand...
Click to collapse
I got the exact same issue.. my phone is samsung galaxy s3 mini. i will be very happy if you would also find the scatter file (although i still have no idea what is that) for my phone too, while i google it. i'm newbie, i'm not really sure what to find.. help me.. :crying:
tebegaya said:
I got the exact same issue.. my phone is samsung galaxy s3 mini. i will be very happy if you would also find the scatter file (although i still have no idea what is that) for my phone too, while i google it. i'm newbie, i'm not really sure what to find.. help me.. :crying:
Click to expand...
Click to collapse
Hey guys am using samsung s3 mini GT I8190, i recently flashed cyanogenmode 5.1.1 on my device, it was working fine but i decided to do a nandroid back up and in the process my phone died. it cannot power on or go to downloading mode. When i connect to my laptop there is a sound that its connected but then it disconnects help please..
omkarfrozen said:
OK if you have stock ROM in md5 then follow these steps
1) copy the md5 file on desktop
2. Download Odin 3.07
3. Switch off your phone and boot Galaxy S3 Mini I8200L into Download
Mode by pressing and holding the Volume Down+Home+Power buttons
(long press until the boot screen appear), now press Volume Up key to
proceed to Download Mode .IN CASE IT doesn't WORK TRY EVERY COMBINATION SO AS TO ACHIEVE 6TH STEP... IF NOTHING WORKS THEN JUST CONNECT THE PHONE WITHOUT PRESSING ANY COMBINATIONS...
4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe
file as an administrator (Right click on the .exe file and click on Run as
administrator)
5. Now connect your Galaxy S3 Mini I8200L to your computer via USB
cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at
ID:COM section and “Added!” text at the message box. This means your
device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are
checked.
8. Now, extract the downloaded firmware .zip file, you’ll find a firmware file
with extension .tar.md5
9. In Odin screen, click on PDA button and select the firmware file with
.tar.md5 extension (The firmware file look something like:
I8200LXXDLJ5_I8200LODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few
moments.
11. Once completed, you would see “PASS!” message in ID:COM port having
green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish.
Click to expand...
Click to collapse
Hello, i need some help. I have tried all but always shows faild...i even use a recovery.tar and the bar goes all the way to the end but when the procces its almost finish it shows FAIL.
What can i do?
I do have the firmwarew file and it does not work, thx
An error has occurred while updating the device software Use the Emergency recovery in the Smart Switch PC Software. An I cannot get it into d/l mode to odin the new firmware. Anyone know how to get it back into d/l mode? Tried pwr vol- bixby, I get to the menu to choose vol up or vol down and no matter the choice I go back to the light blue scrren with that same msg.
Please help!
Thanks
total7kaos said:
An error has occurred while updating the device software Use the Emergency recovery in the Smart Switch PC Software. An I cannot get it into d/l mode to odin the new firmware. Anyone know how to get it back into d/l mode? Tried pwr vol- bixby, I get to the menu to choose vol up or vol down and no matter the choice I go back to the light blue scrren with that same msg.
Please help!
Thanks
Click to expand...
Click to collapse
Try running odin from that screen
Sent from my God Mode 8
louforgiveno said:
Try running odin from that screen
Sent from my God Mode 8
Click to expand...
Click to collapse
I did and it forced it and now works great. Thanks!
What is a god mode 8??
total7kaos said:
I did and it forced it and now works great. Thanks!
What is a god mode 8??
Click to expand...
Click to collapse
Lol, its my Rooted Note 8 (galaxy note 8 - god mode 8) just a play on words.
Sent from my God Mode 8
total7kaos said:
I did and it forced it and now works great. Thanks!
What is a god mode 8??
Click to expand...
Click to collapse
I could not. I have the same problem and I hate odin in setuppconnection. how did you do it?
Thanks
louforgiveno said:
Try running odin from that screen
Sent from my God Mode 8
Click to expand...
Click to collapse
Did not realize this screen actually was download mode, just for Oreo. Thanks I got flashed in Odin!
AaronCompNetSys said:
Did not realize this screen actually was download mode, just for Oreo. Thanks I got flashed in Odin!
Click to expand...
Click to collapse
I tried to do this method and fail o odin when i tried to run odin and flash the sock firmware on that error screen just got fail
any help please
osk4rin said:
I tried to do this method and fail o odin when i tried to run odin and flash the sock firmware on that error screen just got fail
any help please
Click to expand...
Click to collapse
Maybe try other versions of Odin and firmware? Ensure your drivers on PC work. That's all I've got.
AaronCompNetSys said:
Maybe try other versions of Odin and firmware? Ensure your drivers on PC work. That's all I've got.
Click to expand...
Click to collapse
I fixed the problem. I reinstall the drivers and flash the stock firmware from the error screen.
Thank you!
i am also here, can anyone help me pls
kuddi said:
i am also here, can anyone help me pls
Click to expand...
Click to collapse
Uhm.. Did you read what @louforgiveno said? He gave the answer right at the top of the thread.. Just run odin in the warning screen window It'll still go!!
kuddi said:
i am also here, can anyone help me pls
Click to expand...
Click to collapse
I tried to flash my J7Pro and I got this same problem, I have updated all drivers and I tried others version of odin without any success, sometimes odin with crash and at times I would get this from odin, it would not pass setup connection (image submitted)
Django64 said:
I tried to flash my J7Pro and I got this same problem, I have updated all drivers and I tried others version of odin without any success, sometimes odin with crash and at times I would get this from odin, it would not pass setup connection (image submitted)
Click to expand...
Click to collapse
In your case i would try changing the COM port number assignment (to something low such as 1, 2 or 3.
Basically you open Device manager (while phone is plugged in, in download mode) and find the COM port (under COM/LPT) double click to open properties and go to advanced tab (if i remember the naming right) and then change the port assignment number to a low number as i stated above.
Then reboot PC and try to run odin again.
Good luck
Sent from my God Mode 8
Samsung J7 pro
louforgiveno said:
In your case i would try changing the COM port number assignment (to something low such as 1, 2 or 3.
Basically you open Device manager (while phone is plugged in, in download mode) and find the COM port (under COM/LPT) double click to open properties and go to advanced tab (if i remember the naming right) and then change the port assignment number to a low number as i stated above.
Then reboot PC and try to run odin again.
Good luck
Sent from my God Mode 8
Click to expand...
Click to collapse
Hi now I am getting Re-Partition operation failed
Django64 said:
Hi now I am getting Re-Partition operation failed
Click to expand...
Click to collapse
Have you unchecked re-partition on the odin Options tab? Be sure to check or un-check the required options based on what your are flashing.
Sent from my God Mode 8
odin failed for J7pro
louforgiveno said:
Have you unchecked re-partition on the odin Options tab? Be sure to check or un-check the required options based on what your are flashing.
Sent from my God Mode 8
Click to expand...
Click to collapse
Hi yes I did. my phone cannot turn off, lucky for me I have the LCD off so can disconnect the battery and retry
I have also tried changing the ports
(image submitted) this is what I am getting now.
Django64 said:
Hi yes I did. my phone cannot turn off, lucky for me I have the LCD off so can disconnect the battery and retry
I have also tried changing the ports
(image submitted) this is what I am getting now.
Click to expand...
Click to collapse
So the first thing i notice....if you look under "FAIL" (red box) it shows your com port as 16.....this com number should be changed to a single digit number 1-9 (preferably 1,2,3,4 or 5).
Google "change COM port assignment" for details with pics.
Sent from my God Mode 8
Oh yeah and duh!! I forgot another thing to try ...
Remove the (.md5) from the name of the odin files so they end with (.tar).
Hopefully one of the two "tricks" will work for you
Sent from my God Mode 8