Hello,
I tried to upgrade my SPV M1000 to WM5. I followed the procedure and ran the device in bootloader mode. I put the device on the cradle and it displayed USB and V1.06. Ok sounded good.
I started then the HimaUpgradeUt.exe program on the PC. The problem is HimaUpgradeUt.exe didn't find the mobile device at all. After maybe 1 minute looking to it displayed an error 101 message.
I tried different things : install ActiveSync 3.8, 4.2, 4.5 (no change)
I tried to connect the device with mty and it worked !
I tried to run HimaUpgradeUt.exe with the SPV running WM2003 and it found the device. I didn't try to upgrade in this mode anyway.
Any help is very welcome.
is your machine with win vista also?
as you said that you tryed to install ActiveSync 3.8, 4.2, 4.5, guess its WinXP. if its 2000/WinXP/win2003 then use only 4.2 version of ActiveSync. don't know why but i can only have sucess with that version. check for any security software that may block COM. with ActiveSync-Pocketpc.
that HimaUpgradeUt.exe you use is for your model? as im not an expert on this matter, don't know if your precise phone is a himalaya, maybe thats the prob. ehehhe then maybe not as im not aware of all the brands this peace of tech can became!
do right click on my computer and select manage, goto device manager and see for a mobile entry there, while your pocket is connected in serial/usb boot mode. there must be a windows ce device there for this to happen, and you should, not a must, but try to shut activesynch down while doing this detection with HimaUpgradeUt
Yes I'm running Windows XP Pro SP2. I installed activesync 4.2 again and disabled the firewall. I can see windows detecting the device when I put it on the cradle. But there is still the 101 error message when I try to run the update.
Vista and upgrade
Firstly thanks to marcjero for guiding me to this thread...
secondly... I had no probs at all, syncing my device with vista's WMDC(Windows mobile device center), apparently I tried to flash my device... and yes its an i-mate XDA II, currently running on C_ShekharAKU3.5.R40.P24_public_ROM and want to update to the latest one... apparently, connected my device to my system in bootloader mode... and well since then my system has a prob detecting my device... and I cannot even sync now... when i try to run HimaUpgrade, get the same 101 error code... :-(
any ideas how to get this thing working again?
PS: its seriously frustrating for me
use the "HimaUpgradeUt_noID.exe " instead the "HimaUpgradeUt.exe"
download it HERE!
install the latest Active Sync...version 4.5
Syncing in Vista is no problem but as i said from other thread...i tried but not working...you cannot flash the device except in winxp...
Regards!
jojo
syncing not working either...
xda2jojo said:
you cannot flash the device except in winxp...
jojo
Click to expand...
Click to collapse
The prob is that now a normal sync does not work either... so I cannot synchronize my device with my system at all :-(, any ideas at all... on how to get it to work?
xda2jojo said:
use the "HimaUpgradeUt_noID.exe " instead the "HimaUpgradeUt.exe"
download it HERE!
install the latest Active Sync...version 4.5
Syncing in Vista is no problem but as i said from other thread...i tried but not working...you cannot flash the device except in winxp...
Regards!
jojo
Click to expand...
Click to collapse
I tried both (as 4.5) and HimaUpgradeUt_noID.exe without any success.
daWidoW said:
The prob is that now a normal sync does not work either... so I cannot synchronize my device with my system at all :-(, any ideas at all... on how to get it to work?
Click to expand...
Click to collapse
marcjero said:
I tried both (as 4.5) and HimaUpgradeUt_noID.exe without any success.
Click to expand...
Click to collapse
what OS you are using while flashing and synching? xp? vista?
I'm running XP SP2
About Vista...
Read this thread
Could worth to try.
I tried to flash using my work laptop and it's working now
44% processed, finger are crossed...
Related
Hi .
I'm planning on upgrading the rom on my MDA Vario II (Dutch).
First I want to unlock the CID. I've got a 1.04 bootloader.
Recently I upgraded to MS Vista (RTM).
When I try to run the patched radio upgrade I always get a ERROR 150.
Yes.. I'm in bootloader mode. It's says IPL-1.01 and HERM300 SPL-1.04.
Could it be Vista??
yes its vista its had something to do with the sync tool in vista they will fix it according to a earlier post next time use the search function there is a thread about Vista and Ruu
I don't think they have released Mobile Device Center for Vista RTM yet... Right now, you see the phone as a drive... Or did you install the beta MDC?
both. I access the phone through the explorer. And I have the beta MDC setup for syncing with outlook etc.
This has been posted a million times, but here we go...upgrading ROMs will not work on Vista until manufactuers update their usb driver code on the installer; until then, use XP/2003. By the way, is that pirated Vista you have?
cant he just upgrade the rom from SD? I have a (legit) final of vista, but havent tested it yet, since i dont see the need for an uprade atm.
I have the Mobile Device Center installed and it all works perfect.
So, if you cannot do it, due to a bug in Vista, maybe the SD works
You have to be careful as if the program crashes during the upgrade of the rom you can brick your device, so I will stay with XP or SD card way to flash a rom.
aquasesh said:
cant he just upgrade the rom from SD? I have a (legit) final of vista, but havent tested it yet, since i dont see the need for an uprade atm.
I have the Mobile Device Center installed and it all works perfect.
So, if you cannot do it, due to a bug in Vista, maybe the SD works
Click to expand...
Click to collapse
I have Vista RTM and I confirm that the MDC is not stable enough for all these update work... it failed for me a few times and I'm lucky with my 8525 and it is still working OK after reflashing it with another PC (XP).
Aha. That explains that.
I've just managed to get my JasJar stuck in bootloader mode after trying many times to upgrade the ROM. This, despite the upgrade tools telling me there are errors.
Curses.
Apparently people don't know how to read what I posted...
ITS SAFE
I already flashed my Universal with Vista
-First need to install MDC, could be beta from MSDN, because it will update.(still don't know why it's not included on RTM)
-Run compability mode WIN XPSP2
-Run as Adm
thats it...
ISN'T Safe!
phamoui said:
I already flashed my Universal with Vista
-First need to install MDC, could be beta from MSDN, because it will update.(still don't know why it's not included on RTM)
-Run compability mode WIN XPSP2
-Run as Adm
thats it...
Click to expand...
Click to collapse
I am testing vista since CTP (Community Technology Preview), then RC1 (Release Candidate), RC2, now RTM (Ready To Market) as Technet Plus Member.
I can't say is safe to use it even for day by day syncing, I have always unpredictable results; my TyTn sometimes is a Smartphone, sometimes Pocket PC, syncing? may be, every time you connect you have to guess...
This happens because Windows Mobile Device Center (WMDC not included in Vista RTM) is still in BETA 3 stage, not even RC!
LESSON LEARNED
If you plan to install VISTA and you are a WM expert or just business user DON'T upgrade your XP, just install VISTA on a second HD and use your XP to solve the VISTA problems. Even Virtual PC 2007 (good to have with XP installed to have available some appz still not VISTA upgraded) couldn't use USB port, so no way to have a safe "old style" USB connection
Isn't VISTA fault, is a new tecnologies-early adopters problem
One of the most common source of problems with vista are USB drivers (no way in my knowledge to have a simple webcam working with VISTA)
This has great importance when you are doing something "uncommon" and "mission critical" like flashing something!
how possible is to do the upgrade thing over windows vista?
i did had same prob with HimaUpgradeUt not detecting pocket when i tryed to upgrade with beta version of activesynch 4.5 on the previous windows xp.... right now i use my syster's xp machine (during the idle time, of course ) to do this operations.. but its prety anoying!
is there any trick? or HimaUpgradeUt will be updated for vista compatibility?
thanks alot for the amazing forum, the amazing help!
Do you think I have the same issue ?
http://forum.xda-developers.com/showthread.php?t=307828
яι¢αя∂σ said:
how possible is to do the upgrade thing over windows vista?
i did had same prob with HimaUpgradeUt not detecting pocket when i tryed to upgrade with beta version of activesynch 4.5 on the previous windows xp.... right now i use my syster's xp machine (during the idle time, of course ) to do this operations.. but its prety anoying!
is there any trick? or HimaUpgradeUt will be updated for vista compatibility?
thanks alot for the amazing forum, the amazing help!
Click to expand...
Click to collapse
i tried but still not working on vista...
guess must be a thing from some win vista api! now i'm back to WinXP because i use lots of other progs for mobile that not work properly under winVista...
marcjero:
is your machine with win vista also?
as you said that you tryed to install ActiveSync 3.8, 4.2, 4.5, guess its WinXP. if its 2000/WinXP/win2003 then use only 4.2 version of ActiveSync. don't know why but i can only have sucess with that version. check for any security software that may block COM. with ActiveSync-Pocketpc.
that HimaUpgradeUt.exe you use is for your model? as im not an expert on this matter, don't know if your precise phone is a himalaya, maybe thats the prob. ehehhe then maybe not as im not aware of all the brands this peace of tech can became!
do right click on my computer and select manage, goto device manager and see for a mobile entry there, while your pocket is connected in serial boot mode. there must be a windows ce device there for this to happen, and you should, not a must, but try to shut activesynch down while doing this detection with HimaUpgradeUt
edit: but hey, nice for the replys! thanks!
sorry but i have to locked this thread to avoid redundant thread...
please continue HERE!
Thanks!
jojo
I would also like the PDAViet 4.0.0.0.6 Touch, but I must be dumb - because I cant get anything to work.
1. Tried with Vista
a. Works up until USB RUU mode - Vista cant see the XDA
b. Got told to forget trying with Vista
2. Tried with Windows XP cannot detect the PDA
a. Used the RNDIS-USB-Kit_05 - no instructions or doesnt work
3. Tried unlocking the SIM - my number appeared as Wingdings
4. Tried unlocking the CID - could not communicate with the XDA
No guides work for me, I am begging for help
have you tried a hard reset? I suppose you have but just asking...
Hi Chavdar,
Yes I tried hard, soft and factory resets.
I also tried many different rom updaters.
Still without any progress.
soldado said:
I would also like the PDAViet 4.0.0.0.6 Touch, but I must be dumb - because I cant get anything to work.
1. Tried with Vista
a. Works up until USB RUU mode - Vista cant see the XDA
b. Got told to forget trying with Vista
2. Tried with Windows XP cannot detect the PDA
a. Used the RNDIS-USB-Kit_05 - no instructions or doesnt work
3. Tried unlocking the SIM - my number appeared as Wingdings
4. Tried unlocking the CID - could not communicate with the XDA
No guides work for me, I am begging for help
Click to expand...
Click to collapse
I am using vista but flashing temp rom is not possible with vista.
I use windows xp with vmware to flash temp rom first, then I upgrade to any wm6 rom.
have you installed activesync 4.5 to windows xp?
as far as I know, it is the only thing you have to install for you prophet to be detected by XP.
gokhanmoral said:
I am using vista but flashing temp rom is not possible with vista.
I use windows xp with vmware to flash temp rom first, then I upgrade to any wm6 rom.
have you installed activesync 4.5 to windows xp?
as far as I know, it is the only thing you have to install for you prophet to be detected by XP.
Click to expand...
Click to collapse
Hi gokhanmoral,
Yes it was Windows XP with Activesync 4.5.
And it is a rebradn : 02 XDA Neo
soldado said:
Hi gokhanmoral,
Yes it was Windows XP with Activesync 4.5.
And it is a rebradn : 02 XDA Neo
Click to expand...
Click to collapse
Can you get any connection with activesync or mobile device center in vista going at all? Heve you ever synced it with a PC at all?
soldado said:
I would also like the PDAViet 4.0.0.0.6 Touch, but I must be dumb - because I cant get anything to work.
1. Tried with Vista
a. Works up until USB RUU mode - Vista cant see the XDA
b. Got told to forget trying with Vista
2. Tried with Windows XP cannot detect the PDA
a. Used the RNDIS-USB-Kit_05 - no instructions or doesnt work
3. Tried unlocking the SIM - my number appeared as Wingdings
4. Tried unlocking the CID - could not communicate with the XDA
No guides work for me, I am begging for help
Click to expand...
Click to collapse
just reset and hold camera button?
Chris1974 said:
Can you get any connection with activesync or mobile device center in vista going at all? Heve you ever synced it with a PC at all?
Click to expand...
Click to collapse
OK Vmware seems to have done the trick.
Upgrade worked on NVID
Then it seems the 4.0.0.6 touch upgrade worked also - 1 error onscreen of XDA - Cannot execute repllog.exe
Finished clean, but stuck on load screen.
IPL 2.1.5.0001
SPL 2.20.000
GSM 02.47.21
OS 4.0.0.0
I followed the instructions exactly :S
soldado said:
OK Vmware seems to have done the trick.
Upgrade worked on NVID
Then it seems the 4.0.0.6 touch upgrade worked also - 1 error onscreen of XDA - Cannot execute repllog.exe
Finished clean, but stuck on load screen.
IPL 2.1.5.0001
SPL 2.20.000
GSM 02.47.21
OS 4.0.0.0
I followed the instructions exactly :S
Click to expand...
Click to collapse
somehow upgrade_rom.bat fails under my vmware, too.
so, after upgrading to nvid under vmware/xp, detach the usb from vmware and upgrade to wm6 under vista.
just make sure you have copied the files to C: and try to keep the directory length small (for example extract to c:\temp)
gokhanmoral said:
somehow upgrade_rom.bat fails under my vmware, too.
so, after upgrading to nvid under vmware/xp, detach the usb from vmware and upgrade to wm6 under vista.
just make sure you have copied the files to C: and try to keep the directory length small (for example extract to c:\temp)
Click to expand...
Click to collapse
VMware to do NVID
Another XP PC to do the install from c:\xda
IT WORKED!
/deepbow
Upgrade in Vista
i've upgraded all my ROMs in Vista Ultimate using VMWare 6.0 with xp pro SP2, Just DONT TOUCH IT when it starts step2 and dont forget to format it after each step (reset with the 3 buttons pressed), BTW i use full screen mode when flushing in VMWare.
gokhanmoral said:
somehow upgrade_rom.bat fails under my vmware, too.
so, after upgrading to nvid under vmware/xp, detach the usb from vmware and upgrade to wm6 under vista.
just make sure you have copied the files to C: and try to keep the directory length small (for example extract to c:\temp)
Click to expand...
Click to collapse
So where do I find the touchflo application?
soldado said:
So where do I find the touchflo application?
Click to expand...
Click to collapse
it's not an application, it's a technology.
it's simply sampling the touches or sweeps on the screen and giving you iphone-like features, like scrolling with your finger.
htc home is an application. 3dcube is an application.
just keep on reading the threads and you'll learn what they are and in which rom they are present or not.
adamsuail said:
i've upgraded all my ROMs in Vista Ultimate using VMWare 6.0 with xp pro SP2, Just DONT TOUCH IT when it starts step2 and dont forget to format it after each step (reset with the 3 buttons pressed), BTW i use full screen mode when flushing in VMWare.
Click to expand...
Click to collapse
Silly question maybe, but where can I find vmware?
rondol1 said:
Silly question maybe, but where can I find vmware?
Click to expand...
Click to collapse
http://www.vmware.com/
a comprehensive information about vmware products and differences: http://en.wikipedia.org/wiki/VMware
I use vmware workstation 6.0 which provides usb 2.0 support. I guess vmware server or player 1.x versions provide only usb 1.1 support but that should be enough and they are free. I am not sure about vmware player 2.x.
gokhanmoral said:
http://www.vmware.com/
a comprehensive information about vmware products and differences: http://en.wikipedia.org/wiki/VMware
I use vmware workstation 6.0 which provides usb 2.0 support. I guess vmware server or player 1.x versions provide only usb 1.1 support but that should be enough and they are free. I am not sure about vmware player 2.x.
Click to expand...
Click to collapse
Thanxx I'll dive in to it!
Hello @ all. I'm new here and my English is not that good that it should be, so please excuse my mistakes.
I have got a problem I want to install a new ROM on my PDA Phone (XDA Wiza200 G4). I started with this HardSPL. The winwo popped up i pressed "Check DOC", than i got an white screen on my Phone. After this the Tutorial is starting, when I agree to all the questions, the prog should install this SoftSPL, right? But then i am always getting an ERROR, Vista says that this prog is not working normal, and vista is searching for an solution. At the end Vista is closing the Prog and all the Installation is ****.
I am hoping you can understand my Problem and give me an solutuon. Thanks
WinXP is highly recommended,Vista still has problems.You better try it on WinXP.HardSPL will only get installed on WinXP.
Now I've got a problem. Is there any other solution?
Use microsoft "Virtual PC" and install XP ??
Dual boot and install XP?
Sorry posted this in the wrong topic
right click on the ruuupdate.exe file and click properties then click on the compatability tab and click run this program in compatability mode for xp sp2 and make sure the run as administrator tab is ticked too.
Works great for me and i have vista ultimate sp1 and i have had no problem installing roms. I would also enter bootloader mode manually before flashing, i do because certain roms come back with a 260 connection error
Hi, first of all I would like to apologize for my English.
After installing this ROM dynamics7 2.0 ZUNE longer detect my phone. I tried to reset the phone but it did not work. The USB cable is definitely good because he installed the ROM.
I tried different roms but it did not work. Trying on another computer or do not give. The phone is not detected by the Zune. mistake can be seen in the computer drivers. the system can not retrieve them. I will add that the installation of Roma do not have any problems.
What could it be?
freebo21 said:
Hi, first of all I would like to apologize for my English.
After installing this ROM dynamics7 2.0 ZUNE longer detect my phone. I tried to reset the phone but it did not work. The USB cable is definitely good because he installed the ROM.
I tried different roms but it did not work. Trying on another computer or do not give. The phone is not detected by the Zune. mistake can be seen in the computer drivers. the system can not retrieve them. I will add that the installation of Roma do not have any problems.
What could it be?
Click to expand...
Click to collapse
Restart the device in bootloader mode and look for the word "serial" to change to "USB". If so, you have a connection to your PC
berrywr said:
Restart the device in bootloader mode and look for the word "serial" to change to "USB". If so, you have a connection to your PC
Click to expand...
Click to collapse
It's not that but thanks. Loading a bootloader mode by rom without any problem.
Zune does not detect my phone when connected nothing happens. I'm only in device manager two errors:
1.The Windows has stopped this device because of the reported problems. (Code 43)
2.driver this device are not installed. (Code 28)
To find a driver for this device, click Update Driver.
Please help because I do not know what to do with this phone.
I think that when I go into a different mode vol-+ power zune starts but displays an error (the device can not be restored to a previous version)
Of course, before installing custom roms I did not have this problem.
freebo21 said:
It's not that but thanks. Loading a bootloader mode by rom without any problem.
Zune does not detect my phone when connected nothing happens. I'm only in device manager two errors:
1.The Windows has stopped this device because of the reported problems. (Code 43)
2.driver this device are not installed. (Code 28)
To find a driver for this device, click Update Driver.
Please help because I do not know what to do with this phone.
I think that when I go into a different mode vol-+ power zune starts but displays an error (the device can not be restored to a previous version)
Of course, before installing custom roms I did not have this problem.
Click to expand...
Click to collapse
What is your Zune version number and OS version?
berrywr said:
What is your Zune version number and OS version?
Click to expand...
Click to collapse
Zune is the latest version from the download of microsoft (4.8.2345.0). zune is installed on Windows 8 I would add that before the original ROM (before flashing custo rom) everything worked. I tried on another computer without success. I have uploaded a clean Tango, without effect.
freebo21 said:
Zune is the latest version from the download of microsoft (4.8.2345.0). zune is installed on Windows 8 I would add that before the original ROM (before flashing custo rom) everything worked. I tried on another computer without success. I have uploaded a clean Tango, without effect.
Click to expand...
Click to collapse
What about putting your phone in bootloader mode and will it read USB below when connected to pc?
bery you dont get it man have problem syncing the titan with zune, go to your ROM thread and read all, thats the only solution or use google
nikola92 said:
bery you dont get it man have problem syncing the titan with zune, go to your ROM thread and read all, thats the only solution or use google
Click to expand...
Click to collapse
I've inserted a correction here...I restarted by device in bootloader mode and plugged it into my laptop; Zune did not start; however, the letters "USB" do appear in the center-bottom. Rest of post remains the same...You may view your device from your PC's File/Windows Explorer by changing 3 zune driver entries via your PC registry editor and when the device is on wi-fi, you may also view other folders that are on your windows phone. My PC is running Windows 8 Professional. It is important to check if your computer and its drivers are compatible with what you're attempting to do. I don't use Zune for my multi-media copying to and from my device. I use the professional version of Windows for it's easier compatibility such was WMDC 64-bit. I don't pretend to know whether I get, don't get, have or do not have your problem; what I do know is leave no stone unturned; double check everything on your PC for compatibility...are all your drivers updated for example. I have an older 32-bit Dell Inspiron E-1505 I upgraded to 4 GB RAM and upgraded it from XP to Windows 7 Enterprise Edition (not Home Premium) and from time to time whether it was my device or my Win 8 PC; sometimes they wouldn't play nice, thus I have the same setup on my Win 7 machine and if that didn't work; pull out my Hiren's Boot Mini XP Thumb drive and enjoy some old school computing; maybe I don't get it, where I'm from, we call it Plan B...improvise!
berrywr said:
Your phone uses both Zune and WMDC when you are in Bootloader mode. You may view your device from your PC's File/Windows Explorer by changing 3 zune driver entries via your PC registry editor and when the device is on wi-fi, you may also view other folders that are on your windows phone. My PC is running Windows 8 Professional. It is important to check if your computer and its drivers are compatible with what you're attempting to do. I don't use Zune for my multi-media copying to and from my device. I use the professional version of Windows for it's easier compatibility such was WMDC 64-bit. I don't pretend to know whether I get, don't get, have or do not have your problem; what I do know is leave no stone unturned; double check everything on your PC for compatibility...are all your drivers updated for example. I have an older 32-bit Dell Inspiron E-1505 I upgraded to 4 GB RAM and upgraded it from XP to Windows 7 Enterprise Edition (not Home Premium) and from time to time whether it was my device or my Win 8 PC; sometimes they wouldn't play nice, thus I have the same setup on my Win 7 machine and if that didn't work; pull out my Hiren's Boot Mini XP Thumb drive and enjoy some old school computing; maybe I don't get it, where I'm from, we call it Plan B...improvise!
Click to expand...
Click to collapse
I tried on windows 7 pro 64 bit and win 7 home premium. It did not work. In bootloader mode to install the drivers successfully but the Zune does not detect the phone in this mode. Including the phone in normal mode, the driver installation error pops up device not recognized. Zune without the driver does not detect the phone. Previously the phone was detected under the name HTC Titan X310 is now htc eternity.
please help
I have exactly the same problem. Please help: (
vakos8 said:
I have exactly the same problem. Please help: (
Click to expand...
Click to collapse
I'm running Windows 8 Pro on my desktop; both WMDC and Zune will run when I plug my Titan into the laptop; by that I mean I'm at my Start Menu and Tiles; not Bootloader or USB Host Mode. I know that because the HTC Titan appears twice in my File Explorer on my laptop. Though my device is HSPL, I did restart my device in bootloader mode and plugged it into my laptop; it did not start Zune but it did read USB center-bottom. I may in due time get me another Titan I to play with but there's no way I'm risking my device to any further experimentation now that she's unlocked all the way and running 7.8 and runs as smooth as a baby's butt.
berrywr said:
I'm running Windows 8 Pro on my desktop; both WMDC and Zune will run when I plug my Titan into the laptop; by that I mean I'm at my Start Menu and Tiles; not Bootloader or USB Host Mode. I know that because the HTC Titan appears twice in my File Explorer on my laptop. Though my device is HSPL, I did restart my device in bootloader mode and plugged it into my laptop; it did not start Zune but it did read USB center-bottom. I may in due time get me another Titan I to play with but there's no way I'm risking my device to any further experimentation now that she's unlocked all the way and running 7.8 and runs as smooth as a baby's butt.
Click to expand...
Click to collapse
Does anyone have any ideas what it could be? Please help solve the problem.
freebo21 said:
Does anyone have any ideas what it could be? Please help solve the problem.
Click to expand...
Click to collapse
This may or may not help...I don't have my W8 laptop with me now...but there is an option in Windows that lets Windows search for the driver through WIndows Update...and it will automatically install it from the internet?
Is windows update checked to automatically search and download / install new updates?
HTC TITAN
xconomicron said:
This may or may not help...I don't have my W8 laptop with me now...but there is an option in Windows that lets Windows search for the driver through WIndows Update...and it will automatically install it from the internet?
Is windows update checked to automatically search and download / install new updates?
Click to expand...
Click to collapse
help someone? Zune still does not see the phone. The system can not install the driver why are these problems (it does not recognize the phone)
Did not you guys try to play with USB to Video function? If yes - switch it off and reboot.
HTC TITAN
AndrewSh said:
Did not you guys try to play with USB to Video function? If yes - switch it off and reboot.
Click to expand...
Click to collapse
It's not possible. Windows does not recognize the phone. Install different ROM and nothing. Even on a clean TANGO same
+1
Hy every Body,
I have the same problem , and i know one other person with the same problem !!
This default appears with the Rom Deepshinnig V2 (The DeepShining v2 Works Well). After I have flash with 3 different roms, the stock rom tango and the last Eburon 7.8 Rom (in use now). But i still can't connect My titan on diferents Computers where Mozart connect normally.
I can't Switch Usb Video Out
Thanks alls for ideas or directions to follow !!
Domipasc
problem
help someone?
domipasc said:
Hy every Body,
I have the same problem , and i know one other person with the same problem !!
This default appears with the Rom Deepshinnig V2 (The DeepShining v2 Works Well). After I have flash with 3 different roms, the stock rom tango and the last Eburon 7.8 Rom (in use now). But i still can't connect My titan on diferents Computers where Mozart connect normally.
I can't Switch Usb Video Out
Thanks alls for ideas or directions to follow !!
Domipasc
Click to expand...
Click to collapse
you have a very old rom. dotcompt came out with V3 awhile back. other than that I havent used usb video out.
xconomicron said:
you have a very old rom. dotcompt came out with V3 awhile back. other than that I havent used usb video out.
Click to expand...
Click to collapse
I've never used the Dynamic ROMs but I can't stand using Zune so I tweaked my registry to make my Titan visible via Windows/File Explorer, I'm curious as to whether any of you with this problem can connect your devices to the developer tools with Windows Phone 7.x for side loading apps.