Dear
Friends
I need to help’s your.
a little while ago I upgradede my xda Atom rom.( from Xda-Atom-ENG-20060426 to Xda-Atom-Exec-ENG-20060721)
But not worked (in navigation pad )centre key.
I decided to downgrade my xda atom rom. I maked source this subject and find this page : Mr. tjs0509 wrote (member) http://forum.xda-developers.com/showthread.php?t=276664
tjs0509 said:
1. Download the 20060426 from www.seeo2.com
2. Run DSUU, after extracting the files in directory windows\temp DO NOT CLICK NEXT
3. Copy all 6 files into temporary or another directory
4. From that 6 files, copy 2 files with the extention nb0 (diskimage_ver.nb0 and eboot.nb0) to your mini SD
5. After copying into your mini SD, rename diskimage_ver.nb0 into diskimg.nb0
6. Now, you can run bootloader by pressing camera and soft reset ( you have to put your mini SD into your Atom so that the bootloader will boot from mini SD
7. Just wait and if there is some error message do not bother them, the most important that downloading OS Image and Eboot
8. After that your screen will blank, do not worry or panic
9. Pull out your mini SD and connect USB to PC and run bootloader again
( please make sure that your usb already connected to pc )
10. Now u can normally run the 20060426
Click to expand...
Click to collapse
I applied his descriptions. But my xda atom not worked ... not open... not work any keys... black screen ....
If have you knowledge about This subject , how can I repair it .?
Please ! please informe me....
Best wishes
Is anybody can help you.I have same problem.New atom exec software running properly on my device, but phone function is not running.
tatarogul said:
Dear
Friends
I need to help’s your.
a little while ago I upgradede my xda Atom rom.( from Xda-Atom-ENG-20060426 to Xda-Atom-Exec-ENG-20060721)
But not worked (in navigation pad )centre key.
I decided to downgrade my xda atom rom. I maked source this subject and find this page : Mr. tjs0509 wrote (member) http://forum.xda-developers.com/showthread.php?t=276664
I applied his descriptions. But my xda atom not worked ... not open... not work any keys... black screen ....
If have you knowledge about This subject , how can I repair it .?
Please ! please informe me....
Best wishes
Click to expand...
Click to collapse
you cannot fix yourself, you must send to O2, the method you used killed the bootloader.
As I couldn't find a MiniSD (less than 2Gbytes, impossible where I live) I worked on re-flashing my Comet back to the German ROM using USB.
1. Downloaded the Comet ROM + Extended Rom files that Scorpio had placed in rapidshare
2. Executed the DSUU for Atom Life (WWE 20070914) and cut the 12 header bytes from both "FLASH.dio" and "ExRom.img" and pasted those 12 bytes in the German Comet AL1.dio and ExRom.img, and renamed AL1.dio to FLASH.dio
3. Placed the patched German files in the DSUU temp directory, replacing the original WWE files (c:\windows\temp)
4. Instructed DSUU to proceed as normal
5. The deviced cold-booted after finishing and worked.
So, flashing vía USB can be achieved by means of re-using the 12 bytes of both headers (it might be needed depending on the original ROM, to either edit Pass.32 or to hold down the "arrow key" of the PC at the initial stages of DSUU to skip the CID check).
Of course, this has not cured my "Radio ROM" problem, as my XDA Comet still has the WWE Atom Life Radio Rom, which does not work on Comet devices.
I will now work in finding a way (shall it exist) to dump the Radio Rom (I have already got itsutils and executed pdocread a couple of times).
Best regards
Hi
Maybe you can dump the radiorom with haret.
Unfortunetly I have not the knowledge to help you in these job.
You flashed the complete update with replaced files ?
Or did you flash OS and ExtROM only ?
I flashed the complete upgrade.
I did so because I had already flashed the complete WWE Atom Life upgrade, so in my case it made no difference, to put all these extra files back into the device, as they were already there!!!
But if we manage to find out which files affect the GSM/Radio part (and we also find out how to dump radio roms), it might be that we end up with a clear process to update Comet/Life with different ROMs using USB.
P.D.
I did my best into getting a 512 Mbytes MiniSD, but MediaMarkt, Saturn and smaller shops did not have anything so small. They were basically focusing on SD or MicroSD. I think MiniSD may end up as a dead technology.
pepelu456 said:
P.D.
I did my best into getting a 512 Mbytes MiniSD, but MediaMarkt, Saturn and smaller shops did not have anything so small. They were basically focusing on SD or MicroSD. I think MiniSD may end up as a dead technology.
Click to expand...
Click to collapse
You can try a bigger card. If it will be recognized, you can flash with this one.
I don't think, that the device will be damaged.
But I haven't test it.
PS:
I played with pdocread and the following command dumps a part, contained the bootloader.
As I said I don't know how to use pdocread to dump a specified part, but maybe this is a small hint, how you can use this tool.
pdocread.exe -n 0 0x00000000 0xFFFFFFFF -b 0x100000 File_out.bin
Click to expand...
Click to collapse
I belive, if you can dump the bootloader, you can also dump the radiorom.
I hope you have success to lokate the Radiorom.
If I can help to dump the radio, PM me.
I'm not sure, but if you choose in BL:
(5) Burn MOT/BL via UART
and insert a MiniSD, it appered the messages "couldn't find parti.mbn , amsshd.mbn and amss.mbn.
amss.mbn must be the RadioROM.
Your pdocread command works in my mixed WWE-GER device too and dumps te bootloader.
Trying to access binary partition 1 delivers the following error:
"Invalid controler"
Trying to access binary partition 2 delivers the following:
-- Once again the same dump of the bootloader.
--------------------
I also think that it should be possible to dump the Radio ROM, as DSUU is able to report the "date" of the Radio ROM file, whereas WM6 is unable to communicate with the Radio Stack.
Of course, the obvious (not necessarily true) reasoning is that WM6 is trying to use standard API calls that are failing whereas DSUU is accesing the ROM files before going into bootloader mode (when the user decides to execute the upgrade)
HARET fails to dump anything over 4Kbytes with a "short write to disk detected" (it will sometimes not write a single byte down)
Both behaviours may be caused by lack of adaptation to this specific hardware platform.
Regards
P.D.
I really find it unbelievable that the Atom Life has had so little hacking, taking into account that it has been sold by O2 Asia for quite a while, but even looking at Chinese forums (no, I can't speak chinese), they don't seem to be any more advanced than we are.
pepelu456 said:
As I couldn't find a MiniSD (less than 2Gbytes, impossible where I live) I worked on re-flashing my Comet back to the German ROM using USB.
1. Downloaded the Comet ROM + Extended Rom files that Scorpio had placed in rapidshare
Click to expand...
Click to collapse
Pls help, where you can have that comet ROM and Extended Rom.
Thank you.
Dear pepelu456,
I got your same situation. Now, so sad cannot repair.
pepelu456 said:
As I couldn't find a MiniSD (less than 2Gbytes, impossible where I live) I worked on re-flashing my Comet back to the German ROM using USB.
1. Downloaded the Comet ROM + Extended Rom files that Scorpio had placed in rapidshare
2. Executed the DSUU for Atom Life (WWE 20070914) and cut the 12 header bytes from both "FLASH.dio" and "ExRom.img" and pasted those 12 bytes in the German Comet AL1.dio and ExRom.img, and renamed AL1.dio to FLASH.dio
3. Placed the patched German files in the DSUU temp directory, replacing the original WWE files (c:\windows\temp)
4. Instructed DSUU to proceed as normal
5. The deviced cold-booted after finishing and worked.
So, flashing vía USB can be achieved by means of re-using the 12 bytes of both headers (it might be needed depending on the original ROM, to either edit Pass.32 or to hold down the "arrow key" of the PC at the initial stages of DSUU to skip the CID check).
Of course, this has not cured my "Radio ROM" problem, as my XDA Comet still has the WWE Atom Life Radio Rom, which does not work on Comet devices.
I will now work in finding a way (shall it exist) to dump the Radio Rom (I have already got itsutils and executed pdocread a couple of times).
Best regards
Click to expand...
Click to collapse
hi,
u said that we can flash via usb i have atom life purchased from middle east it have wm5 pre-installed , i entered www.seeo2.com and saw that there is an upgrade to wm6 so i downloaded the file an started the update process when detecting device it says ID ERROR, is threr a solution for this problem , and something else i flashed the wm6 rom via SD i took from temp folder in windows and removed the 12 headers , it flashed nice , but i want from the usb so that i can flash the radio files , ext rom , boot loader ...etc.
thnx
Yoou can find sth here for yr upgrade http://forum.xda-developers.com/showthread.php?t=378616
it didnt work for me changed the pass.32 no use i think i cant upgrade via usb
Try this http://www.myxda.com/xda-atom-life_wm6_oct2007ara.aspx
hi i need hel.. plese
i have a o2 comet and mi radio is gone after rom update mwg... plese scorpio could u help me with the original o2 comet files to restore gsm module, i'll be forever in your dept... i sherched everywhere even on ur blog, rapidshare, google, tryed everi original atom life rom, bu evrithig works with other rosms exept radio gsm, plese help me with the files ... i try upgrading rom becouse batery life was lousy. plese help...
the same problem
ion_plugged said:
i have a o2 comet and mi radio is gone after rom update mwg...
Click to expand...
Click to collapse
I have exactly the same problem. Even already try to receive update from service centre... answer was: "we need you device to test and... for repair app cost 100eur and more"
If some one can help us... please help!!!
count me in this list i have the same issue lost radio and imei and i don't have O2 in my country
Hi, is there any way to extract today plug-in which shows baterry, free ram, free rom a backlight intensity.. from original HP rom???
i have installed wm6 rom (remake of atom exec rom) and there isn't this plug-in... help me I miss it!
Hi, look for a software called Today panel pro...its cool!
could somebody extract it??? it must be somewhere in hp windows folder....
kosmodisk said:
Hi, is there any way to extract today plug-in which shows baterry, free ram, free rom a backlight intensity.. from original HP rom???
i have installed wm6 rom (remake of atom exec rom) and there isn't this plug-in... help me I miss it!
Click to expand...
Click to collapse
you put WM6 in the iPAQ rw6815.
How do you do that, i am looking to do also....please help
I have the dutch version.
dont look at my english
onkeltje said:
you put WM6 in the iPAQ rw6815.
How do you do that, i am looking to do also....please help
I have the dutch version.
dont look at my english
Click to expand...
Click to collapse
hi there,
try the post PDAVIET in this atom mobile 6
hy... i'm having problems with my hp ipaq rw6815..home screen flashing
i tryed to make an update and the connection was lost since then it never started... it stays on home screen and it restarts....can anyone give me some help? ... thanks...excuse my english...
aleczar said:
i tryed to make an update and the connection was lost since then it never started... it stays on home screen and it restarts....can anyone give me some help? ... thanks...excuse my english...
Click to expand...
Click to collapse
Yes you still could have an choice to use your fone back in running condition
You can google the hp ipaq rw6815 Rom on xda forum you will found it then download the which can be installed by SD Card and do the further steps given below.
Step by step upgrade 68xx ROM via SD Card
Remember you should have fully charged battery !!!!!!!
1. Extract and copy diskimg.nb0 and cabs folder into a SD card (FAT32 and Blank SD Card are recommended, Kingstone MD-SD not recomended)
2. Press and hold 2 soft key( - ) and reset, Boot loader will show up.
3. Wait abut 10 ~ 20 Minutes
4. Align Screen, adjust time and date
5. Restart your 68xx
Hope your devive will work again.
Have a nice day
Hi, all.
I was missed the ROM Flashing. After I downloaded the SonBlack 20758 Rom and Run UpdateUtility, I found that I forgot to move all file to c:\windows\temp and I have the old rom for HP6828 stored in that folder. After I flashed my Atom Exec, now my boot screen is always flash every 3 seconds with HP screen. And I can't get into the bootloader by pressing camara+reset. Now I need to re-flash into Atom Exec, what can I do? Everybody please help me in this problem.
Pls use original rom from o2 . Cut 12 bytes in the first of diskinmage_ver.nb0 and rename to diskimage.nb0 , copy to miniSD card in original folder ( format in FAT or FAT 32 , < 512Mb ) , put your PPC in to boot loader . => wait for 15min it will be ok . After that you can up with any rom . PDA 20758 rom have very nice interface , but sometime you can not soft reset , and ram is little ( about 18Mb if use TouchFlo ) .
Where i can donwnload ext rom,in kc9 i can't download
please help me can u upload in media fire
Hi,
first ein tried the 6.1 professional ([PRO_V2] WM 6.1 Professional V2 by Erofich [XIP 5.2.19949, SYS 5.2.19591]) on my qtek 8500.. it works fine but i missed the button for "ok"... then i try to install the 6.1 standard... ([STD_V7b+Clean] WM6.1 Build 5.2.19593 AKU 1.1.7 by Erofich ) hang up at 36 % ... restart in bootloader... try again... hang up... reboot and now it freezes... i can only see the bridge with the skyline of a city and the htc logo... nothing happens... battery out, in, start... the same.. only the bridge with the skyline... and it won´t connect to the pc...
Please help...
Thanks a lot... cu gippy
p.s. : i am german so my english is bad, i know ;-)
i found it...
It is necessary to format your microsd card to FAT32 filesystem!
# Empty (erase the contents) of your microSD card from the Windows Mobile file explorer or format it in fat32 from your computer using a card reader (in some cases format doesn't work).
# Extract the .NBH file from your prefered ROM upgrade: In windows use winrar (right click) to extract the contents of the exe file. In Linux / ~MacOS use [cabextract | http://www.kyz.uklinux.net/cabextract.php].
# Rename the .NBH file to *STARIMG.nbh* and copy it to the root folder of your microSD card.
# With microSD card inserted on the phone, start the bootloader (The bootloader is invoked by pressing down the Record button and Camera button at the same time).
# You should see the screen with SD Card searching, then confirm flashing on screen by pressing Softkey.
# Flashing might hang after some time but this is normal. Just wait. Complete flash takes about 25 minutes, so check your battery or connect to charger before the flashing process starts.
cid unlock maybe?