Hello everyone, I could not find a good title for my issue but I will try to explain as well as I can. I own a GT-I9300 (International), but since last official Samsung's firmware update(Jelly Bean 4.3) I am not able to get my phone recognized by my computer. Phone is connected and it charges, but neither Windows or Ubuntu recognizes it as a portable device. I am concerned about UMS is not available on device, but my phone it does not even get detected! I also own a Galaxy SII (4.1.2) and it does get detected by my PC. I think that flashing a custom ROM could solve the problem, since it appeared when I updated official firmware, but the thing is that I cannot root my phone! Tried ODIN but since my phone does not get detected, ODIN does not do its job. I also tried rooting with framaroot and towelroot, but no success: first one says "Failed , try another exploit" but there is only one. And the last one says my phone is not currently supported, even if I change modstrings.
So here is my question: how do I root my phone? I don't know what else I could try. I have already reinstalled Kies and Samsung USB drivers but still not working. Also hard-resetted but no luck.
Hope you guys can help me out because this is really getting on my nerves
Thanks in advance!
jalt96 said:
Hello everyone, I could not find a good title for my issue but I will try to explain as well as I can. I own a GT-I9300 (International), but since last official Samsung's firmware update(Jelly Bean 4.3) I am not able to get my phone recognized by my computer. Phone is connected and it charges, but neither Windows or Ubuntu recognizes it as a portable device. I am concerned about UMS is not available on device, but my phone it does not even get detected! I also own a Galaxy SII (4.1.2) and it does get detected by my PC. I think that flashing a custom ROM could solve the problem, since it appeared when I updated official firmware, but the thing is that I cannot root my phone! Tried ODIN but since my phone does not get detected, ODIN does not do its job. I also tried rooting with framaroot and towelroot, but no success: first one says "Failed , try another exploit" but there is only one. And the last one says my phone is not currently supported, even if I change modstrings.
So here is my question: how do I root my phone? I don't know what else I could try. I have already reinstalled Kies and Samsung USB drivers but still not working. Also hard-resetted but no luck.
Hope you guys can help me out because this is really getting on my nerves
Thanks in advance!
Click to expand...
Click to collapse
Try with other port and USB cable.
Have you Degugging Android activated in Deceloppers options ?
the other day i tried for hours to get my phone recognised. what did it in the end was trying it on a different pc and it worked
KeTuRr74 said:
Try with other port and USB cable.
Have you Degugging Android activated in Deceloppers options ?
Click to expand...
Click to collapse
I have already tried with every port on my PC. I'm using the USB cable that actually came with the device and it is working when I plug in another phones.
And yes, I have activated USB debugging
sosolid4u09 said:
the other day i tried for hours to get my phone recognised. what did it in the end was trying it on a different pc and it worked
Click to expand...
Click to collapse
The thing is that my phone is the only one that do not get detected every single time I connect it. I have already connected one GT-I9100 and GT-S6790L and both get detected. I already tried on 3 different Virtual Machines with Windows XP, Ubuntu, Windows 8.1 but no luck.
As I said in the first post, I think it's a firmware problem since it appeared when I did the official update, which was this one:
Model GT-I9300
Model name GALAXY S III
Country Argentina
Version Android 4.3
Build date Wed, 05 Nov 2014 20:33:08 +0000
PDA I9300UBUGNK1
CSC I9300UVOUGNK1
MODEM I9300UBUGNK1
jalt96 said:
Hello everyone, I could not find a good title for my issue but I will try to explain as well as I can. I own a GT-I9300 (International), but since last official Samsung's firmware update(Jelly Bean 4.3) I am not able to get my phone recognized by my computer. Phone is connected and it charges, but neither Windows or Ubuntu recognizes it as a portable device. I am concerned about UMS is not available on device, but my phone it does not even get detected! I also own a Galaxy SII (4.1.2) and it does get detected by my PC. I think that flashing a custom ROM could solve the problem, since it appeared when I updated official firmware, but the thing is that I cannot root my phone! Tried ODIN but since my phone does not get detected, ODIN does not do its job. I also tried rooting with framaroot and towelroot, but no success: first one says "Failed , try another exploit" but there is only one. And the last one says my phone is not currently supported, even if I change modstrings.
So here is my question: how do I root my phone? I don't know what else I could try. I have already reinstalled Kies and Samsung USB drivers but still not working. Also hard-resetted but no luck.
Hope you guys can help me out because this is really getting on my nerves
Thanks in advance!
Click to expand...
Click to collapse
I can see your frustration Now a few things technically it is a misconception that you need root to flash a custom rom you can actually flash a custom recovery with Odin full wipe and then flash a custom rom from custom recovery (only thing is you will lose all your data because you need root to back up your data)
Now I know the above statement is not very helpful because as you said Odin doesn't detect it (but I thought I would mention it anyway )
The reason framaroot and towelroot, didn't work is because at the moment the only way to root S3 is with Odin.:crying:
You may have tried this but I will mention it anyway first uninstal Kies and all Samsung drivers from your computer ( kies can interfere with Odin) Then try installing these drivers here >> http://developer.samsung.com/techni...Lhp1GqlWRy92Q60CX6PP1mF!80806326?v=T000000117 << If you have tried this then sorry.
Also when you connect the phone go to Device manager in Windows and try to look for your device ( it may say unkown device) it should have a warning triangle right click on it select update driver software and then select browse from my computer and point to the drivers that you have downloaded see if that works.
Another thing to note is if you are using Windows 8 you need to disable Driver signature in start up options ( Google it) for Windows to recognize the drivers.
tallman43 said:
I can see your frustration Now a few things technically it is a misconception that you need root to flash a custom rom you can actually flash a custom recovery with Odin full wipe and then flash a custom rom from custom recovery (only thing is you will lose all your data because you need root to back up your data)
Now I know the above statement is not very helpful because as you said Odin doesn't detect it (but I thought I would mention it anyway )
The reason framaroot and towelroot, didn't work is because at the moment the only way to root S3 is with Odin.:crying:
You may have tried this but I will mention it anyway first uninstal Kies and all Samsung drivers from your computer ( kies can interfere with Odin) If you have tried this then sorry.
Also when you connect the phone go to Device manager in Windows and try to look for your device ( it may say unkown device) it should have a warning triangle right click on it select update driver software and then select browse from my computer and point to the drivers that you have downloaded see if that works.
Another thing to note is if you are using Windows 8 you need to disable Driver signature in start up options ( Google it) for Windows to recognize the drivers.
Click to expand...
Click to collapse
I already tried uninstalling Kies and Samsung drivers. Also I tried looking for device on Device Manager but it does not appear when I plugin my S3, but it does appear when I connect other devices like S2 or Galaxy Fame Lite. They appear as portable devices.
I'm using Windows 7 on my PC and have already tried with different OS over Virtual Machines and still doesn't work.
And thanks for that note, didn't know there was possible to flash a Custom Recovery without root, but I can't since ODIN doesn't detect device :crying:
Then it looks like you are running out of options I would use another computer not Virtual Machines
Okay I'll give it a try but as I said before, looks like an firmware issue, not computer's. Why would my computer detects two another Samsung devices but not mine (which used to work until last update)
Me, too!
I'm having a similar problem. Last week my GS3 stopped working, and I bought another one from Ebay with a cracked screen and swapped out motherboards. The phone seems to work as well as a stock Verizon phone on Jellybean would, but I can't get my Linux, Win 8, or Win XP computers to even recognize that it's attached. Different cables, each and every one of the USB ports, not even a blip. Device Manager in Windows doesn't even see it, and yes I got the developer options unlocked and have enabled USB debugging.
I've got the Samsung drivers installed, and tried to install the CWM device drivers from the SAMSUNG GALAXY S3 TOOLKIT V9, but there was an error and that didn't work, either.
USB connection issues are usually due to Windows conflicts, driver problems or the lead itself. If all these have been excluded then you have either a firmware issue in the bootloader, which is very uncommon, or a hardware problem. The usb port is easily worn/damaged/dirty also the motherboard might be the cause.
There is no silver bullet to cure, test each possible thoroughly.
boomboomer said:
USB connection issues are usually due to Windows conflicts, driver problems or the lead itself. If all these have been excluded then you have either a firmware issue in the bootloader, which is very uncommon, or a hardware problem. The usb port is easily worn/damaged/dirty also the motherboard might be the cause.
There is no silver bullet to cure, test each possible thoroughly.
Click to expand...
Click to collapse
I'm 100 percent sure that it is not due a Windows issue, I have already test every option. I have not considered the usb port to be damaged or worn, which could be possible but phone charges every time I connect it to computer. It just does not get detected as a device. But in order to assume it is a motherboard issue I will have to put away my feeling that the problem is caused by last OTA official update, since this problem started there.
If it is a firmware update issue, is it any option to flash another ROM?
Sent from my GT-I9300 using XDA Free mobile app
try to install usb drivers on windows and factory reset the mobile before using odin but if u want to root there is al ot of program that dont need comp like root master and towel . search for them in google and if u want a rom i recommend cm rom resurrection
peter wagih said:
try to install usb drivers on windows and factory reset the mobile before using odin but if u want to root there is al ot of program that dont need comp like root master and towel . search for them in google and if u want a rom i recommend cm rom resurrection
Click to expand...
Click to collapse
Sorry but the only option that works to root the S3 international is Odin no apps work at the moment:crying:
tallman43 said:
Sorry but the only option that works to root the S3 international is Odin no apps work at the moment:crying:
Click to expand...
Click to collapse
no man how is it ?? believe me it works try frameroot.apk
peter wagih said:
no man how is it ?? believe me it works try frameroot.apk
Click to expand...
Click to collapse
Not on I9300 international version on other variants yes. Believe me if it worked it would be all over the forums post a link showing who it as worked for thanks..
peter wagih said:
try to install usb drivers on windows and factory reset the mobile before using odin but if u want to root there is al ot of program that dont need comp like root master and towel . search for them in google and if u want a rom i recommend cm rom resurrection
Click to expand...
Click to collapse
As I said on previous posts, I have already installed and reinstalled Samsung USB drivers and made a factory reset -one from config. option and another one from Android stock recovery 3e (since I cannot install any advanced recovery -or even root it- to flash a custom rom). Doing those factory reset did not downgrade my last firmware update (when all my problems started).
I also said on previous posts that I tried towelroot and framaroot with no success. As tallman43 says, seems like international version of S3 does not support those kind of one-click to root apps.
-----------------------------------------------------
So far the only options available (if my theory about latest firmware update is the problematic one) are:
● downgrade firmware: [Q] How? Odin is not working since my phone does not get detected;
● root my phone in order to install an advanced recovery and flash a new ROM: [Q] Any way of rooting phone without computer (apart from towelroot or framaroot because I have tried and do not work for me)? I read one XDA post from 2 years ago to root S3 via console apk but latest comments assumes that method stopped working.
● install an advanced recovery without odin or root: [Q] How?
● fix USB firmware issue: [Q] I have completely no idea how to do it. (Already played with *#7284# and *#0808# but did not get my phone detected)
Please I need help, this is really irritating me and I am running out of ideas
Sent from my GT-I9300 using XDA Free mobile app
I guess I have found out what the problem was. It was not firmware (as I thought). It was the micro USB port (as boomboomer said) which seems to not be firmly attached to the PCB. AC charging just seems to work okay, but not USB connections. I managed to figure it out by forcing the USB in a specific position to get it detected for 5 seconds, but then it disappeared.
Yeah, it was not as complex as I thought! I will try to replace that micro USB port as soon as possible, thanks everyone for your help!
Related
Hello all, I have a GS3 international GT-I9300
I'll try to go through the story as fast as I can and give as much detail so you guys can understand how I got here.
Bought the phone unlocked, I was stock, I rooted and then I decided to install a new ROM. I went with Resurrection Remix, it was working great. I did this on a desktop back home. They released a new update to RR so I did a OTA update with "Update Me" apparently the thing flashed but it didn't, the phone still worked but NFC wasn't working as well as having lost root access and some other stuff wasn't working correctly, but I lived with it.
I moved to Florida (home is in NY) and I have a laptop with me, for some reason my laptop used to be able to transfer files to my S3, but it wasn't doing it any more after a while. So it would just charge it. I was in a hotel room last week trying to tether via USB but the PC wasnt having it, it could not locate the phone. This week I moved to a different hotel with internet and decided I would flash stock on my S3 to get rid of all these bugs and get root again, I tried flashing stock through recovery and it wasn't going, so I tried flashing RR again (this time downloaded from the site RR site) and it worked. Still no USB connection but I had root back. I looked around my PC and apparently the Samsung drives are not installing or something on my PC. I installed Kies, but nothing, I tried a stand alone driver install and nothing, so I just gave up and bought Mobile Odin pro from Gplay to try to flash again.
Mobile Odin for some reason (I blame it on myself) wasn't finding/flashing stock so again I decided to try and flash RR and see what would happen. It flashed RR and turned on fine. Then I just decided to look for an NFC fix on XDA. Once I found my NFC fix (http://forum.xda-developers.com/showpost.php?p=32029713&postcount=8367) I decided to just copy the files to the system folder, NFC still not working, rebooted and NFC still no working, so I figured I would try to flash the fix through mobile odin seeing as how I can't get my PC to pick up on the USB. I tried flashing but MO just kept bouncing it back and re-booting into RR. Tried again and no flash. So I decided to again try and flash stock. I tried going into Recovery, the phone shut off like it always does, came back on but stayed in the Galaxy S3 GT-I9300 logo and would not move. I shut it off again, tried turning it on again and still stuck on the galaxy logo. Now, if I leave the phone off and plug in the USB, it won't show the battery charging image, it will actually turn straight onto the galaxy logo again and stay there. I can get the phone into download mode, but like I said my pc won't recognize the drivers.
Now, here are my questions:
What happened?
Can this be fixed?
Am I an idiot?
If I can get the drivers installed on another PC as well as Odin (1.85), will the new PC "see" the S3 or are the drivers on the phone deleted as well? (if that sort of thing can happen, idk.)
I'm going to see if I can borrow a buddy's PC and download the drivers as well as odin to try and bring my S3 back to life, I just want to know, what happens if I can't get the other PC to pick it up ether because the drivers on the phone are deleted (if that's a thing) or what I can expect if it is connected.
What are the steps or guides to follow here? I just got it into Download mode and it says on the top of the screen:
ODIN MODE
Product name: GT-I9300
Custom Binary Download: Yes (2 counts)
Current Binary: Custom
System Status: Custom
sorry , i am sometime getting headache reading long english text so i just briefly look over.
your PC doesn't recognize your S3 ? is that correct ? hmmm , is it possible that your PC (Microsoft Windows I assume?) system is damaged due to something like virus or some reasons ? i have encountered that kinda problem before and be OK after i reinstalled the system.
If it's a soft brick, then it can defiantly be fixed. You might, however, lose your data along the process.
Be glad it's not hard bricked
It happened to me many times, USB error "unknown device" connected. Only fix for it was reinstalling Windows so better if you can use different PC or laptop. Install Kies and other USB drivers. Restart computer, download and run Odin v 3.0x. Flash your phone.
If this doesn't work then maybe your phone have a problem with USB port?
Sent from my GT-I9305 using xda app-developers app
djembey said:
It happened to me many times, USB error "unknown device" connected. Only fix for it was reinstalling Windows so better if you can use different PC or laptop. Install Kies and other USB drivers. Restart computer, download and run Odin v 3.0x. Flash your phone.
If this doesn't work then maybe your phone have a problem with USB port?
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Don't forget to delete kies as you only need the drivers
Sent from my GT-I9300 using Tapatalk 2
Thanks for the replies guys. I'll try to fix tit today, I didn't get a chance to do it last night. If anything I'll update you guys with what's going on.
Like I was saying, I'll try using a different PC to fix it. Now, if I can't get Odin to recognize the phone, what would be the next step?
So I soft bricked my S II plus and I when tried to access ODIN to flash an official ROM , ODIN doesnt detect it , i've tried installing all the drivers ,changing USB cables and even pc's still it doesn't work , I got a fried to bring his S III to test with my pc and ODIN doesnt register even his device .
is there any way i can flash to stock ROM and just turn everything back to normal using CWM ? I just dont wanna root my phone no mpre
There was a reply to a thread in Q&A a couple of hours ago where someone listed the troubleshooting steps for when 'Odin doesn't work'. Search for that thread (skim similar threads in Q&A over the past 12 hrs or so), go through the steps.
MistahBungle said:
There was a reply to a thread in Q&A a couple of hours ago where someone listed the troubleshooting steps for when 'Odin doesn't work'. Search for that thread (skim similar threads in Q&A over the past 12 hrs or so), go through the steps.
Click to expand...
Click to collapse
Thanks I'l search it up , if anyone finds that post please do share it and thanks
Pretty sure it was Immortalneo, so have a look at his posts specifically; should help you to narrow it down a bit.
MistahBungle said:
Pretty sure it was Immortalneo, so have a look at his posts specifically; should help you to narrow it down a bit.
Click to expand...
Click to collapse
It was me, but it was actually you.
"To err is human, to forgive is divine"
Sent from my SGS II
Nothing seems to be working to get ODIN to detect it :/
I tried to flash ROM with CWM it just says "(bad)"
If you've tried everything (and I mean everything. Not 2 or 3 things) including trying with different PC's, without a screenshot/pic of the Odin output we'd have absolutely no idea why it's failing. However, if you'd care to give us a pic/screenshot of the Odin output when you try & flash, maybe we can figure out why.
MistahBungle said:
If you've tried everything (and I mean everything. Not 2 or 3 things) including trying with different PC's, without a screenshot/pic of the Odin output we'd have absolutely no idea why it's failing. However, if you'd care to give us a pic/screenshot of the Odin output when you try & flash, maybe we can figure out why.
Click to expand...
Click to collapse
well sorry for being a noob :/ but is this what your asking for?
Well vick...that is Download mode...
Push vol up and se if your pc sees it.
Sent from the little guy
I would have thought my post was pretty clear. You're obviously out of your depth & shouldn't be messing with your phone. What we need is a pic/screenshot of the Odin screen from your PC when it's failing like this
I just got too excited when everyone was rooting their phones , shouldn't have done it at all :/
My problem is no (yellow bar) is coming out from odin when i plug in download mode at first it could but after i formatted my phone from CWM it couldnt detect anymore , and I tried with two other laptops and even a different cable
Im so sorry to take up your time :/
(ODIN just looks like normal when i plug everything in :S)
OK. I thought Odin could detect OK but the flash was failing at that stage. So you still can't get the phone & PC to recognise each other given everything you've tried.
Honestly, I can't think of anything else you can do. I'd suggest you keep trying tho. Not a lot else you can do beyond that (Unless there's something really simple/obvious we're all missing here).
Edit -Right. List everything, and I mean everything you've tried to try and get the phone & PC to recognise each other/get Odin to work. Every single little step. Details. The more details you provide, the better the chance you get your phone fixed. The less details you provide, the less likely that is to happen.
MistahBungle said:
OK. I thought Odin could detect OK but the flash was failing at that stage. So you still can't get the phone & PC to recognise each other given everything you've tried.
Honestly, I can't think of anything else you can do. I'd suggest you keep trying tho. Not a lot else you can do beyond that (Unless there's something really simple/obvious we're all missing here).
Click to expand...
Click to collapse
This gonna sound CRAZY but I'l give it a try , maybe I reformat my pc and try again ? :3
I'l get back to you guys when I tried that?
Don't do that just yet. That's a little drastic. Read my edit to my PP first.
MistahBungle said:
Don't do that just yet. That's a little drastic. Read my edit to my PP first.
Click to expand...
Click to collapse
Ok , I have tried
-Installing Kies , samsung Usb drivers and every driver i could fine for samsung (ADB)
- I tried both ODIN v1.85 ,3.04
-different USB cables
-Diferent pc's (2 laptops)
-Friends S III ( sadly even his wasn't detected)
-Formatting every single option there was in CWM
-tried flashing using CWM (failed with installation aborted *bad*)
- I even ended Kies processor before running ODIN
- windows update
You missed:-
Different USB ports (and different USB ports on different PC's - you must use a 'mainboard' port, if you don't know what it is, Google it).
Try Odin V1.3
Have you used the USB cable that came with the phone ? Uninstall Kies. Reboot. Redownload Kies from Samsung website. Reinstall. Reboot. Run Odin as administrator in Windows (R-click the Odin .exe & choose 'run as administrator').
That's all I got given it's almost 3.30am here.
MistahBungle said:
You missed:-
Different USB ports (and different USB ports on different PC's - you must use a 'mainboard' port, if you don't know what it is, Google it).
Try Odin V1.3
Have you used the USB cable that came with the phone ? Uninstall Kies. Reboot. Redownload Kies from Samsung website. Reinstall. Reboot. Run Odin as administrator in Windows (R-click the Odin .exe & choose 'run as administrator').
That's all I got given it's almost 3.30am here.
Click to expand...
Click to collapse
ah yes i changed port to , to the back of my pc (motherboard) , yup usb cable that came with the phone and my friends one , I'l try it after I wake up , got work :3
Thank you so much for dealing with me man <3
(its 2 a.m here in malaysia hahah)
Vick4272 said:
Ok , I have tried
-Installing Kies , samsung Usb drivers and every driver i could fine for samsung (ADB)
- I tried both ODIN v1.85 ,3.04
-different USB cables
-Diferent pc's (2 laptops)
-Friends S III ( sadly even his wasn't detected)
-Formatting every single option there was in CWM
-tried flashing using CWM (failed with installation aborted *bad*)
- I even ended Kies processor before running ODIN
- windows update
Click to expand...
Click to collapse
There, your friend's SIII wasn't recognised. You wanna pay a friend a visit to use his/her pc with no kies pre-installed. You go and get it's latest version and repeat all steps.
When you say "kies processor" you mean one kies application running or all 4 that there are actually running?
Sent from the little guy
Well now I have reinstalled Kies , but this time when i plug the usb be in , I can hear my pc detecting it but ( Mobile USB Modem 1.0) fails to install in windows update .
and i've tried with my 2 other laptops without kies installed
oh and I end task for KiesPDLR.exe (said by someone in a post here in Xda)
Are you hitting 'end process tree' when you close Kies in Windoze Task Manager ? It's important anything associated w/Kies is closed, not just the main application.
I have an unrooted Samsung S3, i just received yesterday the notification of the jelly bean 4.3 update (originally ran on 4.1.2) so i went for it OTA via wifi, long story short, after download was finished and the phone automatically rebooted itself, it got stuck on samsung logo, i have waited for hours beside it (since i have modest experience about this) and finally nothing happened, so i started researching the issue, i have tried wipe data/factory resetting (didn't work) along with wipe cache partition, and no use, i have tried kies emergency firmware upgrade and initialization, but it can't see the phone in Download mode, i tried flashing the phone with Odin307 but it also cannot see my phone in Download mode, and i have heard that if the phones usb debugging was active, the phone would be seen, but i never used it, my phone was stock all the way, please help me get my phone working again.
Make sure kies is completely shut down and retry. You could also try reinstalling driver's and Odin and different USB lead or different PC/laptop
please check in device manager if you can see your device , try reinstalling the device drivers, try different cable or it could be charging port .. Good luck ..
andrewwright said:
Make sure kies is completely shut down and retry. You could also try reinstalling driver's and Odin and different USB lead or different PC/laptop
Click to expand...
Click to collapse
actually i have done all of that, i ran odin while kies was completely shut down (killed all kies from task manager) and downloaded latest drivers from samsung and installed them, tried 3 different wires on 2 different PCS, still my phone cannot be seen inside odin or kies
that is why i'm frustrated
is it possible to use the option "apply update from external storage" from system recovery menu? since my phone cannot be seen by any software, and if possible to use that option, what are the files that i should add to my MicroSD Card? and from where should i download them?
In download mode is the product name blank?
Sent from my GT-I9300 using Tapatalk
herculese911 said:
actually i have done all of that, i ran odin while kies was completely shut down (killed all kies from task manager) and downloaded latest drivers from samsung and installed them, tried 3 different wires on 2 different PCS, still my phone cannot be seen inside odin or kies
that is why i'm frustrated
is it possible to use the option "apply update from external storage" from system recovery menu? since my phone cannot be seen by any software, and if possible to use that option, what are the files that i should add to my MicroSD Card? and from where should i download them?
Click to expand...
Click to collapse
i guess problem is in charging port than , try fixing charging port , have you checked if you can see your device in device manager ???
Brownpanda said:
i guess problem is in charging port than , try fixing charging port , have you checked if you can see your device in device manager ???
Click to expand...
Click to collapse
before the update, the charging port worked just fine, the phone was recognized in windows in device manager, and inside KIES, now both of them can't see it, so how could it be faulty?
and for the record guys, i'm not lazy, i never post a thread until i have exhausted all other researching methods
boomboomer said:
In download mode is the product name blank?
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
no its not, showing GT-I9300
In that case try a different pc, lead, version of odin. Either your problem is with the pc (most common) or your bootloader is corrupt, which is very unusual and difficult to fix.
Sent from my GT-I9300 using Tapatalk
Try ODIN v1.85. It always worked fine for me, other versions don't.
Here is a compatibility list for what is worth it.
Brownpanda said:
please check in device manager if you can see your device , try reinstalling the device drivers, try different cable or it could be charging port .. Good luck ..
Click to expand...
Click to collapse
Can you get into recovery still??
boomboomer said:
In that case try a different pc, lead, version of odin. Either your problem is with the pc (most common) or your bootloader is corrupt, which is very unusual and difficult to fix.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Thank you so much for your suggestions, but actually none of the above, i have done the fix that i was asking about (recovering from external card), its a twisted fix but it worked for eventually, i have added the Android 4.3 file (1.43 GB) to my Micro SD Card, and started recovery mode, and went for that option, the device started reading it, and then restarted itself but still stuck on samsung logo, but what i have noticed is that this time when i hooked up my phone to pc, the sweet sound of discovering my phone played, so i know that now i could use odin or even kies, so i went for odin, it recognized the phone, flashed it with the version i downloaded, and it worked. what a relieve
thanks to all of you guys for your help, i hope that this thread would help someone else who hit a dead end.
Best Regards,
herculese911
herculese911 said:
Thank you so much for your suggestions, but actually none of the above, i have done the fix that i was asking about (recovering from external card), its a twisted fix but it worked for eventually, i have added the Android 4.3 file (1.43 GB) to my Micro SD Card, and started recovery mode, and went for that option, the device started reading it, and then restarted itself but still stuck on samsung logo, but what i have noticed is that this time when i hooked up my phone to pc, the sweet sound of discovering my phone played, so i know that now i could use odin or even kies, so i went for odin, it recognized the phone, flashed it with the version i downloaded, and it worked. what a relieve
thanks to all of you guys for your help, i hope that this thread would help someone else who hit a dead end.
Best Regards,
herculese911
Click to expand...
Click to collapse
Thanks for sharing your experience
Hey, i have the same issue.
Can you please link me to the recovery from external sd??
Thanks.
Shahar.
Hello guys,
I have Galaxy S4 I9500, I have rooted this phone many times, but since i removed root and i update to 4.4.2. I cannot root it with ODIN, ODIN reads my phone normally, but when i enter in Download Mode(Odin Mode) Odin application in my computer doesnt recognize my phone.
I tried to change the cables, i tried in a different computers, i tried to chang the prots of usb cable in computer and its the SAME PROBLEM.
I would appreciate really if smbd would help me
Best Regards, :angel:
P.S. in Download Mode I can see Samsugn Official, Official Version, Knox Warranty: 1
Hi,
It's kinda weird that ODIN isn't recognizing your device, KNOX wouldn't be a problem there. You said you tried different cables, different USB ports and different computers, but did you try a different ODIN version? It may be the main cause of your issue.
By the way, for further help with more experienced people I recommend you checking this thread:
http://forum.xda-developers.com/showthread.php?p=53610680
~Lord
LeuritR. said:
Hello guys,
I have Galaxy S4 I9500, I have rooted this phone many times, but since i removed root and i update to 4.4.2. I cannot root it with ODIN, ODIN reads my phone normally, but when i enter in Download Mode(Odin Mode) Odin application in my computer doesnt recognize my phone.
I tried to change the cables, i tried in a different computers, i tried to chang the prots of usb cable in computer and its the SAME PROBLEM.
I would appreciate really if smbd would help me
Best Regards, :angel:
P.S. in Download Mode I can see Samsugn Official, Official Version, Knox Warranty: 1
Click to expand...
Click to collapse
If you wish to root your device just visit my thread on how to root any android device (no computer required)
http://forum.xda-developers.com/showthread.php?t=2797330
This tells you how to root with nothing but your android device.
XxLordxX said:
Hi,
It's kinda weird that ODIN isn't recognizing your device, KNOX wouldn't be a problem there. You said you tried different cables, different USB ports and different computers, but did you try a different ODIN version? It may be the main cause of your issue.
By the way, for further help with more experienced people I recommend you checking this thread:
http://forum.xda-developers.com/showthread.php?p=53610680
~Lord
Click to expand...
Click to collapse
Thanks for answering Lord,
I have tried in different ODIN same problem, do u have any other idea ?
P.S. I didnt find my problem there in that topic
The topic can now be closed, it was working perfectly after i tried sometimes
Thank you very much guys :angel::angel:
Guys I have already rooted my sgs3 and used many other roms. but few months earlier i put 4.3 stock rom to my device.
even now my phone is getting detected via odin(when it is turned on) and kies. But when i put it into the download mode phone isnt getting detected by odin. what i actually need to do it install custom recovery and root this device.
but now framaroot is not working and i have tried many other apks. please help me out
SLDarKprince said:
Guys I have already rooted my sgs3 and used many other roms. but few months earlier i put 4.3 stock rom to my device.
even now my phone is getting detected via odin(when it is turned on) and kies. But when i put it into the download mode phone isnt getting detected by odin. what i actually need to do it install custom recovery and root this device.
but now framaroot is not working and i have tried many other apks. please help me out
Click to expand...
Click to collapse
Aren't you just missing some drivers? Maybe try to reinstall them: http://forum.xda-developers.com/showthread.php?t=961956
Also make sure to allow drivers to interact with your device if anything prompts while in Odin.
Android Debugging activated?
blint6 said:
Aren't you just missing some drivers? Maybe try to reinstall them: http://forum.xda-developers.com/showthread.php?t=961956
Also make sure to allow drivers to interact with your device if anything prompts while in Odin.
Click to expand...
Click to collapse
Have you tried installing Sammy's USB driver?
And I'm presuming the device IS on download mode already (I don't believe it appears on Odin while on normal mode)
1. yes i have already installed drivers and phone is detecting via KIES and ODIN when it is turned on.. it suddenly disconnect whenever i put into download mode.
2. yep usb debugging is activated...
3. Im using 4.3 stock rom.. arent there any other way to root this device without pc .. coz i checked lot of forums but none helped me..
4. my pc - windows 10. but i dont think that it will be a issue coz it's detected when it's turned on (means not using download mode).
SLDarKprince said:
1. yes i have already installed drivers and phone is detecting via KIES and ODIN when it is turned on.. it suddenly disconnect whenever i put into download mode.
2. yep usb debugging is activated...
3. Im using 4.3 stock rom.. arent there any other way to root this device without pc .. coz i checked lot of forums but none helped me..
4. my pc - windows 10. but i dont think that it will be a issue coz it's detected when it's turned on (means not using download mode).
Click to expand...
Click to collapse
Bumping Up this thread since i have really same issue, as in literally the same.
Anyone can help me/us?
xaiury said:
Bumping Up this thread since i have really same issue, as in literally the same.
Anyone can help me/us?
Click to expand...
Click to collapse
mate you have to try a different PC or a port. I have fixed my issue using another PC
Download vroot PC Latest Version VRoot 1.7.8
http://www.vrootdownload.com
Downloading mode only..
I have tried 10000000000000000000000000000 tips tricks and almost everything in this and other websites.. but there is no solution for this:
I have GT-I9300 Pathetic galaxy SIII and since I tried flashing recovery to this it goes into download mode... and its been there ever since.. i have downloaded 32 different kind of drivers claiming Samsung drivers.., buying and trying 8 different USB Cables, formatted my laptop 3 time in order to get it detected by ODIN 3.04 to 3.12... or kies or Smart switch.. working on this piece of crap since 3 weeks day and night but getting nowhere,... If any one knows a way to get it fixed... EVEN IF IT NOT DETECTED BY ODIN OR KIES.
PLZ HELP....
Gr8mobiPro said:
I have tried 10000000000000000000000000000 tips tricks and almost everything in this and other websites.. but there is no solution for this:
I have GT-I9300 Pathetic galaxy SIII and since I tried flashing recovery to this it goes into download mode... and its been there ever since.. i have downloaded 32 different kind of drivers claiming Samsung drivers.., buying and trying 8 different USB Cables, formatted my laptop 3 time in order to get it detected by ODIN 3.04 to 3.12... or kies or Smart switch.. working on this piece of crap since 3 weeks day and night but getting nowhere,... If any one knows a way to get it fixed... EVEN IF IT NOT DETECTED BY ODIN OR KIES.
PLZ HELP....
Click to expand...
Click to collapse
Relax.. I understand how frustrating it can be.
I need a detail explanation of what you did to get it into that state and what you've tried. A bullet point list will suffice. I just need to know so I can work out how buggered it is and where to go from here.
I need to know which PC operating system you're using, which variant of s3 you have including its region (this can be determined by the sticker in the battery compartment unless you already know.
There is a possibility it is your os not detecting the device because of drivers but if you've tried formatting and starting over then it shouldn't have any issues. The only other option is to manually edit the drivers ".cat" file with the s3's actual physical address before installing the drivers, but this is in extreme circumstances when the os is not "playing ball".
Also remove kies or at least stop all of its running processes when using odin.
My advice at this stage is to manually remove all drivers from the pc OS regarding the s3 and wait until we figure out where the s3 is at. I have a gdrive with some useful stuff that I know works on Windows XP flawlessly. https://drive.google.com/folderview?id=0B4vTiHTBB629ZW5vQndpbjFnblk
One question though.. When you pull the battery out and reinsert it. Does the phone automatically boot to download mode, is it stuck there permanently or does it boot loop?.
Beamed in by telepathy.
shivadow said:
Relax.. I understand how frustrating it can be.
I need a detail explanation of what you did to get it into that state and what you've tried. A bullet point list will suffice. I just need to know so I can work out how buggered it is and where to go from here.
I need to know which PC operating system you're using, which variant of s3 you have including its region (this can be determined by the sticker in the battery compartment unless you already know.
There is a possibility it is your os not detecting the device because of drivers but if you've tried formatting and starting over then it shouldn't have any issues. The only other option is to manually edit the drivers ".cat" file with the s3's actual physical address before installing the drivers, but this is in extreme circumstances when the os is not "playing ball".
Also remove kies or at least stop all of its running processes when using odin.
My advice at this stage is to manually remove all drivers from the pc OS regarding the s3 and wait until we figure out where the s3 is at. I have a gdrive with some useful stuff that I know works on Windows XP flawlessly. https://drive.google.com/folderview?id=0B4vTiHTBB629ZW5vQndpbjFnblk
One question though.. When you pull the battery out and reinsert it. Does the phone automatically boot to download mode, is it stuck there permanently or does it boot loop?.
Beamed in by telepathy.
Click to expand...
Click to collapse
1st of all I want to thank you bro for reply...
Now..
I am using Windows 10 64bit, using Samsung galaxy sIII GT-I9300 Indian single sim varient.
I rooted it using KingoRoot successfully but I found I wasn't able to get SuperSU and without that I was not able to use root fun properly so I tried to flash the same with flashFire.. it failed as it require SuperSU. So I tried installing TWRP recovery from playstore and it started flashing and after reboot, It stuck on the Downloading mode.. No matter how many buttons I tried pushing combined it stuck on downloading mode...
I tried almost all method on YouTube and websites but it still don't work. Worst thing .. I tried fixing the same by Kies as well as ODIN but .. I never detect my phone.. when i connect my phone after uninstalling and Or installing the samsung driver and Kies as well.. windows didn't recognise it.
I am about to give up n this and almost ready to smash the phone with wall hammer and throw it under my car tyres but I committed myself not to do that before 14th May.
The problem is most likely Windows 10 64bit. I'm quite sure the drivers don't agree with them.
You're going to have to find an older OS and try it. Either use a virtual machine or dual boot and load up a real OS like XP. Then we can begin the proper problem solving. I hate putting percentages on things but I'm 90% confident that windows 10 is an issue here, mainly for the fact it is 64bit and the drivers aren't made for that.
As for button combo's if they don't work while booting and it goes straight to download mode then there is a big problem and it could be bricked. You can try holding just the power button for about 15 seconds while in download mode and it "should" attempt to reboot. If not then as I said, big issue ahead.
No matter what you need to get it seen by odin so get yourself xp somehow and use the stuff on my gdrive. You need to get yourself a copy of the latest firmware for your phone, ready to flash via odin should you get it to see the phone.
Beamed in by telepathy.
Windows 10 to win7
shivadow said:
The problem is most likely Windows 10 64bit. I'm quite sure the drivers don't agree with them.
You're going to have to find an older OS and try it. Either use a virtual machine or dual boot and load up a real OS like XP. Then we can begin the proper problem solving. I hate putting percentages on things but I'm 90% confident that windows 10 is an issue here, mainly for the fact it is 64bit and the drivers aren't made for that.
As for button combo's if they don't work while booting and it goes straight to download mode then there is a big problem and it could be bricked. You can try holding just the power button for about 15 seconds while in download mode and it "should" attempt to reboot. If not then as I said, big issue ahead.
No matter what you need to get it seen by odin so get yourself xp somehow and use the stuff on my gdrive. You need to get yourself a copy of the latest firmware for your phone, ready to flash via odin should you get it to see the phone.
Beamed in by telepathy.
Click to expand...
Click to collapse
I have moved to windows 10 to win7.. and tried all over again (in the process to downgrade the same i formatted by all drive.. thanks to my idiot brother)..
i tried all the same thing again but still no luck..
now trying windows XP 32 bit in virtual machine.
i will let you know..
and i am thinking to hand it over to samsung service center.. lets see what they can do?
Gr8mobiPro said:
I have moved to windows 10 to win7.. and tried all over again (in the process to downgrade the same i formatted by all drive.. thanks to my idiot brother)..
i tried all the same thing again but still no luck..
now trying windows XP 32 bit in virtual machine.
i will let you know..
and i am thinking to hand it over to samsung service center.. lets see what they can do?
Click to expand...
Click to collapse
If you can afford to have them look at it then it's up to you but you will be billed for it as the s3 is out of warranty. They haven't made the s3 for about 3 years now.
Beamed in by telepathy.
shivadow said:
If you can afford to have them look at it then it's up to you but you will be billed for it as the s3 is out of warranty. They haven't made the s3 for about 3 years now.
Beamed in by telepathy.
Click to expand...
Click to collapse
I know.. hopefully it will be done under my expectation.. or last thing I know to donate the same to hammer and trash bin :cyclops: