Hi there,
I've had my Zenwatch 2 (WI501Q) for a couple of weeks now and everything was fine, but a couple of days ago my phone (Nexus 5, latest stock android) bricked, so I had to factory reset. I had to also factory reset the watch to get it to pair with my phone again. After doing this, the watch now has an annoying quirk, in that when it goes to ambient/always on mode, there is a weird screen/colour pop after about a second. It will first drop to ambient and then the whole screen will pulse/blink (sometimes there will be a horizontal line across the whole screen too) and then it will settle back to ambient mode, however the ambient it finally settles on has slightly less definition (jaggier lines) and any colours are slightly less vibrant than the ambient it goes to before the pop.
I've also just noticed that when it wakes it goes in reverse, there is less of a noticable pop, but the colours get better and there is slightly more definition for 1/2-1 second before it fully wakes up.
The more jagged lines/less vibrant colour aren't a problem really, it's more the 'pop', just thought i'd give as much detail as possible. Phone is on 5.1.1, wear is 1.3.0.2442001. I have tried an additional factory reset on the watch, but the problem persists.
Any one have a similar issue?
Thanks.
I'm not noticing that on my watch. You might want to factory reset your watch and see if the problem persists.
Yes, I am having the same problem -- very annoying. It started from when I first set it up, I have already factory reset it once but it didn't help. Unfortunately, where I live customer service is poor and I'm afraid that the store where I bought it will just say that is the way it is meant to work and refuse to replace it.
Annoying that it's happening to others (but i guess good to know it's not just me). I'll have a go at Asus support and see what they say.
cmactavish said:
Annoying that it's happening to others (but i guess good to know it's not just me). I'll have a go at Asus support and see what they say.
Click to expand...
Click to collapse
Please let us know what they say. I'm not looking forward to sending mine in for servicing as it could take well over a month to get any results.
Could it be related to the watch face you're using? I've not seen this with the couple of watch faces I've tried.
I stumbled across this thread yesterday and thought nothing of it. Then last night I installed Apollo Launcher and noticed this happening on my Zenwatch 2. To my knowledge, this was not happening before that and now that I have seen it, it cannot be unseen and its bothering me. I tried uninstalling Apollo Launcher and restarting the watch but neither solved the issue. It also persists through different watch faces. I have tried the ASUS built in faces and faces from Watchmaker.
neezy13 said:
I stumbled across this thread yesterday and thought nothing of it. Then last night I installed Apollo Launcher and noticed this happening on my Zenwatch 2. To my knowledge, this was not happening before that and now that I have seen it, it cannot be unseen and its bothering me. I tried uninstalling Apollo Launcher and restarting the watch but neither solved the issue. It also persists through different watch faces. I have tried the ASUS built in faces and faces from Watchmaker.
Click to expand...
Click to collapse
It bothered me so much that in the end I returned the watch and got a LG Urbane instead (even though it cost more) -- I'm glad I did though as the screen is perfect so far and the watch is great in general.
kanga10 said:
It bothered me so much that in the end I returned the watch and got a LG Urbane instead (even though it cost more) -- I'm glad I did though as the screen is perfect so far and the watch is great in general.
Click to expand...
Click to collapse
I don't know if it bothers me that much. I specifically bought this watch because it is my first smart watch and I liked the features for the entry level price point. I did a full wipe through recovery last night and that didn't fix it. For now I've just started using a watch face that its less noticeable on. My current face only shows the hour and minute hands in ambient so it just dims and switches to displaying just the hands and then a split second later, brightens slightly and switches to the low rez ambient mode. I haven't noticed the horizontal line as much, but it does still happen occasionally.
I logged it with ASUS and this was their reply:
Thank you for contacting Asus technical support, my name in Ana and I’m happy to assist you regarding the issues you have with our device.
Concerning your problem because you already tried the factory reset and the situation did not change I’m afraid it might be a hardware issue.
Asus as the manufacturer doesn’t offer repair for accessories due to our company’s policy but because you recently purchased it I kindly recommend you return it to the retailer to get a refund /replacement (depending on their return policy).
Best regards
Asus Technical Support UK
Click to expand...
Click to collapse
That feels like a bit of a cop out.
I sent another reply saying that it has been happening to other people and pointed them to this thread.
I have the opposite problem.
When it goes into ambient mode it first dims down too much, then quickly pops back to the normal ambient mode.
So kind of actual answer:
Dear user,
This is normal situation for ZenWatch 1 LCA43 version. It use to protect panel from burn out. And we will improve this on next system firmware update.(Not ZenWatch Manager update.)
Thank you for your feedback.
Asus ZenUI Team
Click to expand...
Click to collapse
Although, I've only just noticed that they are referring to the ZenWatch 1...
I'll reply again to make sure they know it's happing with the ZenWatch 2.
Great, I didn't even notice it before and now I do. However, it definitely doesn't bug me. I still like the watch.
Related
Hi
I am having problems with my screen. Looks like the LCD is faulty. Trying to resolve with Samsung Support, but thought I would ask here if this is a known problem or if there is a simple fix.
It looks like the grayscale colors are not right, I installed a screen tester and the grayscale bars have a red tint. all other tests in the appl look ok. however pictures/video's all look like they are 16bit color and icons look like they are bleeding
Here is a picture of the problem
imageshack.us/photo/my-images/836/atab1large.jpg
Any thoughts?
Eric...
Looks like a faulty panel !
Take it back to where you bought it and have them exchange it.
Sent from my Galaxy10.1 TouchWiz/ADWex equipped Starship.
I have exactly the same problem Tablet has been bought in the United States and now I am in Europe. Samsung won't repair/replace it anywhere in Europe. Only US Samsung offered to help me but the tablet needs to be at a United States address. Now I have to send it back to someone I know.. will take months
Well my problem disappeared.... not really sure why/how, but I have been playing with different ROM's etc. and I THINK it might of been when I did a permissions repair, but...
Plus i'm 99.3% sure I had the problem before I rooted/ROM'd
Another reason to stop loading these 3rd party ROMs. I dont understand why people are installing these 3rd party ROMs to begin with. The stock ROM is by FAR the most stable and error free ROM you can use. Most of the issues people are starting threads about would have NEVER occurred if they just stuck with the stock ROM.
I get this too now. I've been pootin' around with different roms for a while, no problems. Then a few days ago while I was running GalaxyTask 8.0 the "bleeding" started slowly. First around the edges of things, but then the entire screen. The colors seem to color-cycle into the end result. I figured it might be the rom so I tried a stock one. And then I tried a complete stock reset with stock recovery and factory reset - the works. No change. It's still like this. And in the bootloader and the recovery too. Sometimes it gets moments of clarity, everything is fine, but only for a few seconds.
Busted tablet? I bought it while in the US this summer, so taking it back will be an issue. Getting a Transformer Prime late next week *fingers crossed* but still. I was hoping to sell this fully functioning :|
Example:
http://dl.dropbox.com/u/120921/IMG_20111214_214938.jpg
I had the same issue. Also bought in US while I live in Hungary. I had to send it back to my relatives who took it back to Samsung and they replaced it in warranty. Fortunately, I was travelling there by the time we got the new one and I could take it back home with me. This seems to be a weakness of the tablet. My replacement unit has been working nicely ever since.
I had the same issue with an August build stock tablet from the US.
Thankfully Samsung UK took it in for repair and ended up replacing it as it was apparently unrepairable.
My issue used to show up with 60+ minutes of continued use. I think it was thermal related as the warmer it was the quicker it seemed to develop the fault. putting it on standby for a few minutes used to clear it, but the problem would come back quickly as it was warm.
Anyone know how Samsung handles this issue if the device it out of warranty? Mine is acting up pretty bad and I haven't been able to find anything on here about repairing the issue on your own. It will be clean view for a few minutes and then the color bleeding some background effects kick in making the tablet a large paperweight. I've been looking for and excuse to get the 10.1 Note, but it sure would be nice to get a few bucks for this since it's in perfect condition... besides the screen.
My 10.1 is starting to develop the same issue. Never been rooted, always on a stock rom. I've never dropped it or banged it around. It also seems to start happening afternlonge usage. First imsee a few purple lines across the screen and then the entire scren turns to 8bit colors, etc. Once I turn it off and back on it goes back to normal. Annoying, especially simce I bought it 13 months ago so I'm guessing it's past the warranty period.
Sent from my GT-P7510 using Tapatalk 2
Jnowak1981 said:
My 10.1 is starting to develop the same issue. Never been rooted, always on a stock rom. I've never dropped it or banged it around. It also seems to start happening afternlonge usage. First imsee a few purple lines across the screen and then the entire scren turns to 8bit colors, etc. Once I turn it off and back on it goes back to normal. Annoying, especially simce I bought it 13 months ago so I'm guessing it's past the warranty period.
Sent from my GT-P7510 using Tapatalk 2
Click to expand...
Click to collapse
I'm with you - mine has never been rooted or tampered with. Other than getting heavy usage, I've taken perfect care of it. I've been unable to find a fix.
Ed Riverside said:
Anyone know how Samsung handles this issue if the device it out of warranty? Mine is acting up pretty bad and I haven't been able to find anything on here about repairing the issue on your own. It will be clean view for a few minutes and then the color bleeding some background effects kick in making the tablet a large paperweight. I've been looking for and excuse to get the 10.1 Note, but it sure would be nice to get a few bucks for this since it's in perfect condition... besides the screen.
Click to expand...
Click to collapse
If you're out of warranty you're on your own. Samsung won't repair or replace it for free.
At this point I'd just like to know how to fix it and what it would cost, ballpark. I haven't been able to find anyone who's delt with it, bar throwing their tablet.
Sent from my cellular telephone that has internet connectivity.
Ed Riverside said:
At this point I'd just like to know how to fix it and what it would cost, ballpark. I haven't been able to find anyone who's delt with it, bar throwing their tablet.
Sent from my cellular telephone that has internet connectivity.
Click to expand...
Click to collapse
My 10.1v just went.
Guys, I'm having the same issue today. And here is the fix:
1. Take out the back cover.
2. Look for the black cable that have SET printed on the end.
3. Removes both ends and then reconnect.
4. Push/rub at both ends while the screen is on. You'll notice the tint-colour of the LCD will change. Stop when it looks normal again then put a tape on top to hold the cable in that position
4. Put the cover back and enjoy your Note 10.1 again
Good luck!
Dear all,
I've been waiting a little before rooting and installing a new ROM to make sure I don't need to return my phone for any reason. (So, it is stock now, no root, locked bootloader, KNOX still there, etc.)
So, far I've noticed three small problems, which I don't know if they are universal or just mine:
Sometimes when I get a call, the touch screen is irresponsive. If I press the lock/power button twice, it seems to work again. (I now have set up to press home to answer.)
It often feels a bit warm, more than I'd expect. (I have it in a case, though, a Spigen Slim Armor. It fits perfectly though.) But this happens sometimes when it is just sitting, not playing games. It is not really hot, but I can feel it warm in my pocket.
Sometimes I get a pop between songs. See this post
(So, at least one person also has the last problem.)
I can live with any of the problems above, but I'd hesitate to have a defective unit which can have bigger problems later on. Is any of the above an issue for you? Any suggestions if I should exchange the phone?
Thanks!
Luis
Do you remember when were the times when the screen was unresponsive?
I've read somewhere that sometimes when the screen is woken up and is under some pressure this will happen, and the only way is to do what you did. It's not uncommon in touchscreen phones though, so I wouldn't worry about it.
The verge app was broken until the most recent app update. Also, the s5 seems to refuse allowing Dashlane's accessibility service from working properly. So no more auto filling passwords for me. Ugh. I hoped rooting might help but it didn't. Now I really can't wait for custom ROMs to start appearing. Samsung, you make great hardware (like amoled displays) but your software sucks. Even the software on my Samsung TV is stupid.
Yes on two out of three!
finotti said:
Dear all,
I've been waiting a little before rooting and installing a new ROM to make sure I don't need to return my phone for any reason. (So, it is stock now, no root, locked bootloader, KNOX still there, etc.)
So, far I've noticed three small problems, which I don't know if they are universal or just mine:
Sometimes when I get a call, the touch screen is irresponsive. If I press the lock/power button twice, it seems to work again. (I now have set up to press home to answer.)
It often feels a bit warm, more than I'd expect. (I have it in a case, though, a Spigen Slim Armor. It fits perfectly though.) But this happens sometimes when it is just sitting, not playing games. It is not really hot, but I can feel it warm in my pocket.
Sometimes I get a pop between songs. See this post
(So, at least one person also has the last problem.)
I can live with any of the problems above, but I'd hesitate to have a defective unit which can have bigger problems later on. Is any of the above an issue for you? Any suggestions if I should exchange the phone?
Thanks!
Luis
Click to expand...
Click to collapse
The unresponsive screen is more than a little issue, it is being reported all over the web, and get's more severe over time. I'm thinking that it is a bad proximity sensor defect, either firmware, hardware or software. Some people are reporting along with myself that sometimes for no apparent reason, the screen will not turn on even though the phone is completely operational! This has happened to me four times now and I am stock with very few apps on my phone, five total games and Pandora. I do use a substitute launcher that I've used for years but I don't believe that would be the issue since others report the same issue with stock launcher.
The pop or skipping you speak of in sound happens to many of us who stream music in our automobiles. It even happens on the note3. The fix is simple for that one though! Turn the screen on. I was told that with many of the streaming software music programs that the phones CPU goes to sleep and does not offer enough processing power to the music program. I stream all day via bluetooth to my Auto's sound system and it will usually start to skip, click or whatever after the phone has been untouched for about twenty minutes. The second I turn the screen on the problem alleviates itself. You can find even more information by googling that one, in fact both of those! The heat one I have not had, both with stock battery and zero lemon high capacity battery. The phone very rarely get's warm. However, when I was using wireless charging it would get warm even after charging was complete but I believe that is a normal event with QI type tech.
I just received my Z3TC . Has anyone experienced any issues with the tablet? Usually the first batch that comes out has bugs so I wanted to know if anyone has noticed anything wrong with their tablet.
UPDATE:
Just noticed this. I tried plugging in some earbuds. I own the MDR-EX300LP which came with the Sony Walkman Z i bought 2 years ago. (The battery died out after 2 years). Well it seems that the Z3TC does not recognize the earbuds.. I tried some headphones and they are not recognized either. So I plug in the MDR-EX300LP earbuds into my friend's Galaxy S3 and they are recognized immediately. I wonder what is wrong maybe it is something obvious?
Have you? The only issue I have noticed is it is not available in Canada with no ETA and price point! Sony has been ever so helpful in ignoring requests for this info, but has now stated "some time in November".
Also, be wary of unlocking your bootloader as Sony might not fully disclose what may not work - they did that for the Z3 compact and now early unlockers are faced with a lower quality camera, in addition to the known software not working.
Sean09 said:
Have you? The only issue I have noticed is it is not available in Canada with no ETA and price point! Sony has been ever so helpful in ignoring requests for this info, but has now stated "some time in November".
Also, be wary of unlocking your bootloader as Sony might not fully disclose what may not work - they did that for the Z3 compact and now early unlockers are faced with a lower quality camera, in addition to the known software not working.
Click to expand...
Click to collapse
Haha that is an issue. I was lucky in receiving the tablet so quick. Others that preordered before me still haven't received their tablet. What I was worried about was of known problems with the tablet. After 30 days I'm stuck with it so maybe I will have no problems with my Z3TC. Hope you can order one soon I've barely had time to use it but it is really good looking. Here in the U.S they only have the 32GB White Wifi only version. No LTE option or 16 GB option. Also no black color option.
Got mine. I've been looking for an issue but none... Loving it. Can't wait for the lollipop update
androidkid311 said:
Got mine. I've been looking for an issue but none... Loving it. Can't wait for the lollipop update
Click to expand...
Click to collapse
+1
Let's talk about issue(?). I've found, that when i browse/see other sources of white background on my Z3TC 32gb Wi-Fi Only, something distrubs my eyes, like some RGB-colored thing. If i try to position the tablet with white background at some angle to my eyes, i'm starting to see some rainbow-like effect on screen(one, two), its easy to see here. Then, i've powered off my Z3TC, and THIS is what i've seen in REFLECTION of my PC monitor on the Z3TCs powered-off screen. Is this same for you guys? Sry, for bad english, its 3am in Russia, and o'm not that good at it even when i'm not that tired.
That is strange
iDielord said:
Let's talk about issue(?). I've found, that when i browse/see other sources of white background on my Z3TC 32gb Wi-Fi Only, something distrubs my eyes, like some RGB-colored thing. If i try to position the tablet with white background at some angle to my eyes, i'm starting to see some rainbow-like effect on screen(one, two), its easy to see here. Then, i've powered off my Z3TC, and THIS is what i've seen in REFLECTION of my PC monitor on the Z3TCs powered-off screen. Is this same for you guys? Sry, for bad english, its 3am in Russia, and o'm not that good at it even when i'm not that tired.
Click to expand...
Click to collapse
That does not look normal. I did the test with the white background and it does not look like that on mine. I might be wrong but your tablet might have a defective screen?
Same issue here with my Z3TC 16gb wifi black. It is the only problem with the tablet but i find it rather disturbing when reading on white background. Probably will exchange or return. I have tried your test with turned off screen and a reflection from the monitor, same rainbow effect. I repeated the test using my galaxy s4 mini and i saw similar but much less visible pattern of red-green/yellow stripes. I think it got something to do with anti-reflective coating or maybe some polarization of the glass?
They Leak
My 5 day old Z3 tablet just died after using in the bath, it wasn't submerged at any time just little bit of water on it from my hand. Used it for about an hour after when it said shutting down due to heat. Thought it was odd as it didn't feel hot then I noticed both camera lense is steamed up
Left it for a while and tried to turn it back on but it's dead
All doors securely closed and no signs of wet around the seals when I just opened them to check, had a Z1 for a year now and even had that under water in the sea with no issues. Very unhappy.
srichar3 said:
My 5 day old Z3 tablet just died after using in the bath, it wasn't submerged at any time just little bit of water on it from my hand. Used it for about an hour after when it said shutting down due to heat. Thought it was odd as it didn't feel hot then I noticed both camera lense is steamed up
Click to expand...
Click to collapse
After that dodgy screen it was totally dead, just black screen no lights no reaction to power button or reset.
Stuck it on the radiator for an hour with port covers open and eventually it started showing the charge light but when I pressed the power key it showed zero% charge. Did volume and power key reset and then it showed 63% charge and started up again. Seems fine at the minuet but already got replacement coming from O2 as its less than 14 days and still in cooling off period so will swap it anyway. Dont think ill be using it in the bath again pretty poor really as I literally only got few drops on screen so it must have got in round the screen somewhere or the speaker slot.
Can everyone do the dead pixel test and see if you get this rainbow effect when titling the screen. I did and have it. Just like someone mentioned in a few posts above
I haven't any issues jet but one concern. The phone signal ? bars some time it goes down to none almost never full but it works for Internet and calls so I don't
I've also found that 3rd party earbuds create a problem with it. I use v-moda earbuds (which have worked fine on iPads/iPhones/Galaxy phones (S2/Note2)) is giving me problems on this tablet compact. But what's even more interesting, is that it only happens when the tablet is experiencing vibration. E.g. Riding the bus. I was on the bus, and it keeps defaulting to a screen called, "Smart Connect." It always keeps jumping to the headset portion within that app with every vibration of the bus. It is very frustrating! Anyone know why or how to turn that off from happening? Give it a try, plug it in with 3rd party headphones, and start rattling the tablet compact as if your on a bus. Please let me know. Many thanks.
AirBruce said:
I've also found that 3rd party earbuds create a problem with it. I use v-moda earbuds (which have worked fine on iPads/iPhones/Galaxy phones (S2/Note2)) is giving me problems on this tablet compact. But what's even more interesting, is that it only happens when the tablet is experiencing vibration. E.g. Riding the bus. I was on the bus, and it keeps defaulting to a screen called, "Smart Connect." It always keeps jumping to the headset portion within that app with every vibration of the bus. It is very frustrating! Anyone know why or how to turn that off from happening? Give it a try, plug it in with 3rd party headphones, and start rattling the tablet compact as if your on a bus. Please let me know. Many thanks.
Click to expand...
Click to collapse
I'll give it a try and let you know.
Does anyone have issues with ghost touches, like a Z1 phone lineup has?
zOOOOmer said:
Does anyone have issues with ghost touches, like a Z1 phone lineup has?
Click to expand...
Click to collapse
Not at all! Your touchscreen might be faulty....
androidkid311 said:
Not at all! Your touchscreen might be faulty....
Click to expand...
Click to collapse
I don't own a tablet yet, that's why I'm asking, that's important for me.
As Z1 owner I don't want to have another device with such issues. And talking about Z1 - that's model-related problem affecting every device including Z1 and Z1C (dunno about Z2 and Z3), not a couple of faulty phones.
Before submerging your Z3 check it is air tight (and thus water tight) see here for how to test using the built in pressure sensor. Close ports properly, Press the screen gently in a couple of locations pressure should rise by 6-7 millibars. Do the same test with a port cover open, pressure will not change when you press screen. I have a Z3 phone service options are near identical. NB: no idea how to do this on non LTE version... Perhaps sideload the phone apk? http://forum.xda-developers.com/xperia-z2/general/guide-test-waterproofing-water-t2908333
Hi, just got the 32gb version, and noticed the screen has a slightly mpre yalloish hue on the bottom (the side opposite to the sony logo. A bbit disturbing...
Been having a weird issue.. Wifi is turned off when screen is off. I made sure I clicked Wifi is always on in wifi setting. I made sure i unclicked turning wifi off in stamina mode. Seems like a weird bug.
I walked into best buy at store opening on release day and picked up a still warm from the assembly line N9. I don't use it much so i never really put much thought into it. However i was playing Clash of clans one day and i was having a hard time getting troops to deploy. I did little investigation and was able to reproduce this touch screen issue. Its might be one out of 20 times but then i can click a few times in the same spot with no response. Its really inconsistent but its there. I contacted HTC they first had me factory reset and yep its still there. Then they had me mail it into them on my dollar.... fine whatever i just want it fixed. They receive it, say its good and send it back.
Thoughts on what i should do?
Buy another at best buy and return the defective one with your receipt. Quick and no BS to deal with.
Actually I encountered a similar issue while playing Uplink; sometimes the screen just stops reacting to touch inputs. My workaround would be to rotate the device by 180° with Auto-rotate activated. When the new orientation kicks in it works again.
I've so far attributed that to some Lollipop bug, but if it turns out to be a hardware issue it would be pretty severe. For now I'll stick with my device and I hope your new one, should you replace it, will work properly.
OK. So I'm sure as this tab gets out there more and more, there will be rumblings and grumblings with this generally awesome device. I've had mine (SHT-AL09) for three weeks here in the U.S. and while overall I am very happy, nothing is above some criticism and there are some things I could use some help with.
I've already mentioned in another thread having issues with the position of the volume rocker and power button as well as the overall shape. This device is not boxxy like the X2 I'm replacing and it takes some getting used to.
With this, I am deathly afraid of dropping it because of the shape. I did buy a folio wallet; but ultimately, I want a semi stiff gel case to absorb some shock. I have ordered one from China; but it looks like it could take up to 6 weeks to get it here in the US. So, I can use any advice or links for a gel case for this tab in the US. Also any recommendations for a quality gel case is likewise desired.
Secondly, this tab annoyingly begins playing music ANY TIME it connects to a blue tooth device (not sure if this is Huawei or Android.) This is real annoying when I get into my car first thing in the morning and I am met with Ronnie James Dio blaring at me before I've had my coffee. Anyone know how I can stop this from happening? My sanity demands it (BTW, deleting RJD from my library is not an option.)
Otherwise, I'm loving this tab and totally psyched to have a giant screen with LTE capability and a dialer!! Hopefully, this will set a trend and show the world we are a market best not ignored.
I had been having trouble getting Aquamail to activate the LED indicator on new messages. Supposedly, Huawei is known to make it hard for non-stock apps to activate the LED. However, in this case I eventually realized that the issue was that the LED didn't support the light blue color that was set by default in Aquamail. I changed it to red and new e-mails now trigger the LED.
I have noticed that when I adjust screen brightness via a 3rd party app - i.e. HD Widgets or Setting Profiles Lite - the screen brightness reverts to something different after I turn the screen off and back on again. This might not turn out to be an annoyance, as I kind of like the way auto brightness works on this device.
Is this thing supposed to be VOLTE capable? If so, I imagine it can be enabled via the build.prop file. I don't get VOLTE, nothing I care about too much but it would be nice.
I'd love to be able to customize the appearance/structure of the notification bar and quick settings. I used 'Color Status Bar' for this on my Sony Z3TC and it worked really well. It doesn't seem to work with Oreo.
What opens up automatically to play music when you connect a bluetooth device? That has gotta be an easy problem to solve. Also, I think it has to do with your car stereo more than anything else.
Hey, it's the stock music player. I tried changing the default music player but the stock one still starts playing every time I connect to my car radio. I heard there is a third party app to address this but I'd prefer to stay within the stock system if possible.
What I really find annoying is the bug with keyboard attached: Brightness Controll pops up randomly, interrupting my typing ... really annoying ...
(M5 Pro, Germany)
There are some differences between emui 8 on the M5 and emui 8 on the Mate SE. Didn't expect that. Not pleased about it, as they are things that get used frequently. An AOSP rom would change that of course.
I didn't find the sharp edges very comfortable when typing. Found a soft tpu case that makes things a lot better. Not a fan that the main camera sticks out a bit which seems like it would get damaged when putting the tablet down on a hard surface. Again, the case helped with that.
Didn't like that the navbar was eating up screen space but found an option to use the finger print scanner as the nav bar, which I prefer after getting used to it.
Overall I'm enjoying the tablet, love the display.
Okay, since we're airing grievances
I think the design of their hardware for phones is awesome, works perfectly. I don't think the same design translates to tablets. Tablets are held and used differently than phones, thus need an appropriate sized bezel, weight etc.
Just my .02
AsItLies said:
Okay, since we're airing grievances
I think the design of their hardware for phones is awesome, works perfectly. I don't think the same design translates to tablets. Tablets are held and used differently than phones, thus need an appropriate sized bezel, weight etc.
Just my .02
Click to expand...
Click to collapse
I generally agree - but really the only thing I would change on the 8.4 version is the placement of the fingerprint sensor, which is too easy to press on accident when holding the tablet in landscape orientation and typing or what not. It should be nearly to the far right of the tab's bottom area, not dead center.
And really, this would be obvious to any ux designer testing the product, the problem is there is too much emphasis on blindly copying Apple and Samsung. Apple is a cult and Samsung makes extremely high quality hardware that isn't always user friendly.
My two issues right now is that 3rd Party Music apps don't show the album cover and stuff on the lockscreen. And that my device vibrates like twice after rebooting it.
Couldn't find a workaround so far
Here's a minor annoyance - try sending a text message to a number without typing a '1' before the number...you'll get an error message: '(555) 555-5555' is not a valid recipient.' Instead, you have to type out 1-555-555-5555.
Just checkng in. Brought this up when I started the thread, but has anyone found a way to stop the stock music player from starting up every time the tab is connected to any bluetooth audio device?
steveyal said:
Just checkng in. Brought this up when I started the thread, but has anyone found a way to stop the stock music player from starting up every time the tab is connected to any bluetooth audio device?
Click to expand...
Click to collapse
Music doesn't start playing automatically for me when I connect bluetooth headphones. Maybe it has to do with my config.
Here are some threads that might help you:
https://forum.xda-developers.com/mate-10/help/bt-auto-plays-music-t3700769
https://forum.xda-developers.com/mate-10/help/disable-stock-music-player-stop-auto-t3718770
No updates since March on my M5 8.4" Uk wifi?? WTF Huawei, you never change
@kedge probaly you would like to have a look at HFF, there are several new updates available. Either do a manual update using HFF or wait another few days until the update arrives via OTA.
Only update there seems since the one I have is 151 but not approved.
Still really not a good sign not having monthly security updates.
kedge said:
Only update there seems since the one I have is 151 but not approved.
Still really not a good sign not having monthly security updates.
Click to expand...
Click to collapse
Now it seems that 151 is approved... Then it is probably coming
Inviato dal mio CMR-AL09 utilizzando Tapatalk
Anyone got any opinions on the screen/ratio for reading pdfs and web browsing? I'm on the fence about getting one of these.
I have firmware version .122 i found on FF that there is .123 available and approved for install so i use vpn to force update but during install it fails at few percent that it failed to verify. What to do?
Thanks
Also does the storage option for SD install of apps do something?
Still not able to figure out how to stop the damned music app from blaring every time I connect via bluetooth to my car stereo. I'm thinking the problem may be at the car stereo end as others are not having this issue. My latest nuisance is constantly turning on the screen accidentally. Wondering if there is any way to customize the screen wake up options. Maybe changing the behavior of the front facing button or something else. I was also having problems with applications shutting down mid text while using a third party keyboard. (Swype.) I finally had to delete the keyboard and go back to stock.
So for me the screen density was driving me nuts. Everything was way bigger than my previous tablet, even after setting the view mode to "small".
I fixed this by going into developer options and setting the smallest width to 750. More fits on the screen now. Much better.