Hi,
A friend has a brand new Redmi Note 2 and after few hours the phone been bricked, so I flash by following this tuto > en.miui. dot .com/thread-187696-1-1.html
It works !
2 weeks later the phone bootloop again, so we followed this tuto again but didn't worked. It was pretty hard to access the Flashboot menu, seems the vol buttons were not working. Sometimes we reached the boot menu, but the phone was freezing on the menu and booted again.
Finally I reached the flashboot, I wiped it successfully !
But nope, the phone is still bootlooping.
Any ideas ? Of course today he tried to go to the shop, but the "professional" said him he never heard about this brand and this problem, so he can't fix it...
Cheers
Use Flash Tool and flash Recovery again
I've flash again and still bootlooping ..
I can't access the storage part on the phone.
Is it possible to put a rom custom ?
The phone try to load something but still loading ...
Have you try a full wipe that means that all data is deleted ? What Firmware have you installed ? What Recovery is on your phone ?
Related
Hi guys, I really need your help.
I'm new at this rooting stuffs and I tried to root my Oppo Neo 5.
I tried so many softwares like OneClickRoot, FramaRoot, and Kingroot but none seemed to work.
So I resorted to an app called oppo tools
It worked at first but I got really annoyed when my status bar suddenly colored to red when my phone discharges to 15% so I unrooted my phone and rooted back again. I really thought that was going to fix my problem but that's where the bootloop issue started.
I tried to flash some custom recovery zip but it failed since I only have a stock recovery.
But the thing is, I found a guide that says to rename the clockworkrecovery img to PG86IMG.zip.
So I did tried that and as soon as I flashed the zip from my stock recovery, my phone hanged.
I long-pressed the power button to restart and boot into recovery mode but nothing seems to happen.
I'll try to explain a bit more on how it looks when I boot my device.
When it boots normally (I mean not pressing the volume to enter recovery mode) it will only show the logo but when I try to go into recovery mode it will show the logo with a little text on the lower left portion "Recovery Mode"
Before I flashed the PG86IMG.zip, recovery mode was still working and the charging screen when off is working too.
but after I flashed the zip, every time I try to recovery mode the logo shows up with the little text but RECOVERY MODE isn't working. When I charge my phone it automatically boots up and shows the logo and text like it's trying to go recovery mode (I'm just trying to charge? It's going to recovery mode)
I tried using "adb devices" on cmd but it's not detecting any devices.
I'm really out of ideas guys, I know not all people use this model but what would be your suggestion?
A suggestion on how to fix this would really be appreciated :good:
I'm sorry I'm really new at this, please correct me if I did something wrong starting this thread. :angel:
@DeepBricked please confirm your problem, Boot-loop and can enter into recovery.
Salman Al-Badgail said:
@DeepBricked please confirm your problem, Boot-loop and can enter into recovery.
Click to expand...
Click to collapse
Oh, I'm sorry, I didn't notice.
Lately I can't access the recovery mode but now
I'm currently on Boot-loop and I can enter into recovery.
The ColorOS recovery mode only have limited function that I can mess around.
It only has the apply update, wipe data and cache, reboot, power off and system file verification.
As always I already did wipe the data and cache but nothing happens. Still boot-loop.
What should I do?
DeepBricked said:
Oh, I'm sorry, I didn't notice.
Lately I can't access the recovery mode but now
I'm currently on Boot-loop and I can enter into recovery.
The ColorOS recovery mode only have limited function that I can mess around.
It only has the apply update, wipe data and cache, reboot, power off and system file verification.
As always I already did wipe the data and cache but nothing happens. Still boot-loop.
What should I do?
Click to expand...
Click to collapse
You made a soft brick, not to worry flash it with correct stock firmware, if the phone is in warranty than ask them to do flash, this will take approx 10-30min. If it isn't in warranty than you should try it own or else pay some amount and the rest they will do.
Salman.
how about bootloop, cant enter recovery, reboot continiously when turn on even going to recovery, only fastboot isnt rebooting automaticaly but pc days drivers not succesfuly installed, and when off it qont detect by pc because of rebooting auto,
where can i find a rom for my oppo neo 5
pls help me pls
Hello everyone.
I received my le max 2 x820 6gb, o have flash The RR rom, but my Phone freeze and boot loop. I tried to reflash The rom and apears an error "unable to mount /system". I tried to flash The pure nexus, but same error. When I tried to flash The cuoco rom, The Phone reboot and nothing apears on The screen and The Blue Led light shows up.
I tried The qfil process, but The Phone stay in The EUI logo.
What can I do to save my Phone?
Sorry about my bad english.
Thanks guys.
alexfernando said:
Hello everyone.
I received my le max 2 x820 6gb, o have flash The RR rom, but my Phone freeze and boot loop. I tried to reflash The rom and apears an error "unable to mount /system". I tried to flash The pure nexus, but same error. When I tried to flash The cuoco rom, The Phone reboot and nothing apears on The screen and The Blue Led light shows up.
I tried The qfil process, but The Phone stay in The EUI logo.
What can I do to save my Phone?
Sorry about my bad english.
Thanks guys.
Click to expand...
Click to collapse
Bro, did you installed custom recovery? Did you took backup or forgot to do it?
alexfernando said:
When I tried to flash The cuoco rom, The Phone reboot and nothing apears on The screen and The Blue Led light shows up.
Click to expand...
Click to collapse
I had blue light when used wrong twrp according to rom. Try flash stock ROM to see it is able to start.
Filozof71 said:
I had blue light when used wrong twrp according to rom. Try flash stock ROM to see it is able to start.
Click to expand...
Click to collapse
Didnt Work
kavinferrara said:
Bro, did you installed custom recovery? Did you took backup or forgot to do it?
Click to expand...
Click to collapse
I have custom recovery. I deleted my backup! Do You have one? Can You send to me?
alexfernando said:
I have custom recovery. I deleted my backup! Do You have one? Can You send to me?
Click to expand...
Click to collapse
Bro, mine is x821 4gb ram. Do a thing. Download the stock firmware, rename it to update and Put it on a USB. Open the recovery.
Stock frimwere mean, not the latest updated one. The first frimwere in wich the phone came out.
For TWRP, connect the USB as OTG after opening the recovery. go to mount, select the OTG option and check it's opening or not. If not, restart the recovery and do it again. No success means try different USB device. For me, it refused to connect wirh any of SD cards. I used HP pendrive. Go to advanced settings, select syatem, cache, dalvik cache, internal and wipe everything. Then go to instal, select the firmware. It will start installing. If notx then it's not a correct firmware. After install, reboot to system. It will take more time to start. Give enough time. It will work. Phone go above 45°c in this process. Try to cool it. Going above 42°c is not good for mobile.
Sideload didn't worked for me. I tried sideload the firmware, then tried to push the firmware to internal memory via sideload, it just rejected all the commands. Maybe you try it.
If all failed, you have to unbrick it. I didn't came across your phone's service ROM. You need services rom, flash software and qualcomm's drivers. There are lots of walk-through in there about unbrick the phone.
Check androidbrick.com for the guide. If they had, you no need to serch for service rom.
To do this, you have to put the phone in EDL mode. Pressing volume up and down while booting will do it. It won't show any sign of activity in that mode. Don't worry. If incase you thought of not doing it and wanted to reboot, press the power button for about 15 seconds. It take more then 9 seconds for hard reboot.
Okay, i found the guide in there. But they tried on 4gb version. Hope it works on 6tb too
http://www.androidbrick.com/leeco-letv-x820-max-2-qdloader-9008-unbrick-twrpguide/
kavinferrara said:
Bro, mine is x821 4gb ram. Do a thing. Download the stock firmware, rename it to update and Put it on a USB. Open the recovery.
Stock frimwere mean, not the latest updated one. The first frimwere in wich the phone came out.
For TWRP, connect the USB as OTG after opening the recovery. go to mount, select the OTG option and check it's opening or not. If not, restart the recovery and do it again. No success means try different USB device. For me, it refused to connect wirh any of SD cards. I used HP pendrive. Go to advanced settings, select syatem, cache, dalvik cache, internal and wipe everything. Then go to instal, select the firmware. It will start installing. If notx then it's not a correct firmware. After install, reboot to system. It will take more time to start. Give enough time. It will work. Phone go above 45°c in this process. Try to cool it. Going above 42°c is not good for mobile.
Sideload didn't worked for me. I tried sideload the firmware, then tried to push the firmware to internal memory via sideload, it just rejected all the commands. Maybe you try it.
If all failed, you have to unbrick it. I didn't came across your phone's service ROM. You need services rom, flash software and qualcomm's drivers. There are lots of walk-through in there about unbrick the phone.
Check androidbrick.com for the guide. If they had, you no need to serch for service rom.
To do this, you have to put the phone in EDL mode. Pressing volume up and down while booting will do it. It won't show any sign of activity in that mode. Don't worry. If incase you thought of not doing it and wanted to reboot, press the power button for about 15 seconds. It take more then 9 seconds for hard reboot.
Okay, i found the guide in there. But they tried on 4gb version. Hope it works on 6tb too
http://www.androidbrick.com/leeco-letv-x820-max-2-qdloader-9008-unbrick-twrpguide/
Click to expand...
Click to collapse
Didnt Worked. ;(
alexfernando said:
Didnt Worked. ;(
Click to expand...
Click to collapse
Then you didn't tried it perfect. How come unbrick goes not working.
it is easy to recover your phone, $$$
Originally posted by: Azpre
Hello
A while ago, I tried to root my Essential Phone using magisk. I unlocked the bootloader, flashed twrp, but when I tried to install the magisk zip file, it failed, and I was stuck in a bootloop.
Easy problem to solve right? I wiped everything from my phone (including the ROM), downloaded a stock ROM (.ZIP file, and I think that’s what ****ed everything up) and when I tried to install it, it failed once again. Therefore, I downloaded another stock ROM file (this time as a .img file) and tried to installed it.
But what I ended up doing, was installing some other .img file as the boot image (on twrp), and after that, my phone kept restarting endlessly. I couldn’t access the recovery mode (if I tried to press the vol down + start buttons, or just the start button, the process would repeat, so I leaved my phone there until it run out of battery, now its off).
I was despaired and tried to search every inch of the internet for a solution, and obviously, I could not find it.
Any help would be greatly appreciated
Thanks for your attention.
(Im not sure if this is really a soft brick, I named this thread wit my basic knowlage, sorry if Im wrong)
Hi , what is full Model of phone ? and did you tried with fastboot flashing ?
https://www.youtube.com/watch?v=RrMLqSXcxjI
Teddy Lo said:
Hi , what is full Model of phone ? and did you tried with fastboot flashing ?
Click to expand...
Click to collapse
going to give it a shot after I buy another type - C cable, because mine just broke ;-;
but I think that's not going to work, because I can't access the recovery mode menu
when I press the power + vol down keys the Essential's logo appears and get stuck in a bootloop
Thanks anyways
Hello and Servus,
I recently got a Homtom from my neighboor to look at because its full of bloatsoftware and seems to have battery issuses.
First I tried to install TWRP by this guide "https://romprovider.com/2018/10/homtom-zoji-z7-root/" and this one "https://www.getdroidtips.com/twrp-recovery-zoji-z7/"
I was able to "install" twrp using adb but I was stucked in a bootloop after this, couldnt even get to recovery /twrp, so I tried my way with the Smart Phone Flash Tool.
Some problems where persistent and I couldnt connect my phone with the tool until I had to format it via.
After formating the phone and installing the stock rom I got from here "https://rootmygalaxy.net/stock-rom-on-zoji-z7-official-firmware/" I am now stuck even worse. I dont even have a bootloop, the phone just starts and goes off.
Even worse was it, after I tried to flash to a "higher" version I got from this post "https://forum.xda-developers.com/general/general/zoji-z7-4g-smartphone-t3613364" - I just got a display bug and couldn't do anything, so I flashed the stock rom again.
Right now the only thing that works is fastboot. If I try to boot it in recovery or else it just goes off.
Is there someone who can help me there ?
Hello, so my phone is stuck in an infinite bootloop orange statefrom unlocking the bootloader and flashing the wrong version of TWRP....... It is a Wiko Tinno, SAS, U307AS... These are the names ive found looking for help. Its a government phone from assurance wireless... But basically i got this hone from my girlfriend i thought it was a wiko ride.... 30 minutes after given this phone i got it stucl in bootloop xD i found a tutorial on here i beleive to root a wiko ridge.... i unlocked the bootloader.... tried to install TWRP once, the phone rbooted to the setup as it factory reset from the bootloader unlock but when i went to recovery TWRP wasnt there.... Why? because it wasnt the right version for my phone..but as i am a little on the slow side i tried it again..... thats when it wouldnt even boot passed the orange state logo screen.... and since i tried to install a cust recovery guess what? i cant get into recovery mode..... the phone freezes and reboots back into bootloop. unlocking the bootloader im pretty sure assurance wireless wont like it and probably wont replace it..... i have been searching the internet and ive tried most things ive found ive tried flash tools sdk tools mtk tools flashing scatter files etc etc... i try and search for a way to fix it every couple days... its been about 3 months now.... im kind of running out of patience ive went as far as opening the back and replugging most of the films in hopes it would reset something to make it work.. if anyone has any ideas or anything please i would love to know...... on phone specs its tinno U307AS assurance its wiko life 2 and some weird gov. phone website its wiko SAS idk..
IMHO you're advised to re-flash phone's Stock ROM by means of Wiko Phone Flash Tool.
jwoegerbauer said:
IMHO you're advised to re-flash phone's Stock ROM by means of Wiko Phone Flash Tool.
Click to expand...
Click to collapse
i have. i just tried again. i cannot find a firmware or stock rom for my device. i have even tried to usea mt6739 scatter file.
im no beginner to phones here..but im seriously stumped.
Maybe this helps:
Unplug your phone from PC if it's connected. Shut down your phone by clicking and holding for approx 10 secs ALL THREE BUTTONS: VOL UP + VOL DOWN + POWER. If you do this properly, your phone should not self-boot into Orange State anymore.
jwoegerbauer said:
Maybe this helps:
Unplug your phone from PC if it's connected. Shut down your phone by clicking and holding for approx 10 secs ALL THREE BUTTONS: VOL UP + VOL DOWN + POWER. If you do this properly, your phone should not self-boot into Orange State anymore.
Click to expand...
Click to collapse
i fully charged my phone to test it out sadly it hadnt worked :\
Here ya go: https://rootmygalaxy.net/download-wiko-stock-firmware/
So I am having same issue after attempting to flash boot.img and now I cant access fastboot mode recovery mode I cant even hard reset it plus now I cant even get computer to recognize device HELP!!!