Hello guys!
My Redmi 3 Pro didn't boot into TWRP so I followed the instructions in this post to fix it but I didn't notice that there is a file attached and used TWRP image instead. Now my phone is completely bricked, I can't put it into recovery, fastboot nor edl mode. There is no reaction after plugging charger. But when I connect it to a computer it's visible as Qualcomm HS-USB QDLoader 9008 so I thought it automatically runs into edl somehow and tried to flash using MiFlash but it always fails with "sahara read end error with status 9" even when using deep flash cable. I've never unlocked it's bootloader but was running LineageOS and then xiaomi.eu ROMs so I think it was unlocked inofficially by the seller I bought it from. Is there a way to fix it?
There is no ROM on the device, everything is deleted.
TWRP does not work anymore, but I'm still in fastboot mode.
The device is recognized by Windows as an unknown Android device.
When I install the Coolpad drivers, I can access them with the Flash tool YGDP.
Other flash tools do not work because the Qualcomm HS-USB QDLoader 9008 does not work when set up manually.
I have downloaded the Stock Rom (update zip) and get it with no Flahstool on the device.
Does anyone have the Stock Rom for the Leree Le 3 (C1-U02) in CPB format, I think that would work.
I am thankful for every help
Same here, please help.
Help is here
alkxx said:
Same here, please help.
Click to expand...
Click to collapse
Are you done with your problem??
Yes, I somehow managed to revive the phone by flashing a new boot image with coolpad download assistent.
But if you have a full image, maybe you can post it here to help other people.
Hi,
i am having trouble with flashing my device Huawei G630-U20. I can't boot it normally or into recovery mode. Also my bootloader is locked so I can't use fastboot to flash partitions and recreate android.
So I tried to use qualcomm Platform multi-download tool. Connected the device and got Com port: Qualcomm HS-USB QDLoader 9008. After that I clicked on Scan&Download but got error "Port isn't ready to download".
Can anyone help me with this?
Thank you
have same problem with LDN-AL30
how to fix
Hello everyone, a couple of months now are also thanks to you in the world of modding. Yesterday (i have a Xiaomi Mi A2 Lite) during the installation of a custom ROM using ADB, typing in the fastboot command "erase system", I wrote erase a_boot for error because before I was reading a post about it and I wrote it. Yes I know, I was too stupid. Result? The phone does not start up either in recovery or in fastboot mode, and from the PC it is recognized as COM port. I have already documented about it and tried to flash everything with the Qualcomm tool after installing the drivers but nothing. I tried the EDL by activating it manually to unlock port 9008, but still during the flash gives me error. I tried everything, do it all over again in a newly formatted and clean PC from any other driver, but nothing. During the flash, even if I put the firmware in the same directory, it still gives me error. Guys I'm desperate please. I do not know what else to do. I hope to receive your answers :crying::crying::crying:
I also have same problem.. if you find some solution then tell me also.. my device is different.. but problem is same.. device basically dead & can be recognised in com port
i try to flash pixel experience, the developer guide to flash firmware+vender zip after flashing the ROM zip, as per the guide I flash the ROM ZIP and firmware zip, after flashing the firmware, mobile rebooted and nothing to show in display. so i try to force boot in to recovery. the screen nothing to show. so i try to boot on fastboot. still nothing to show in mobile screen even the fastboot logo. i connect my mobile to computer, and i noticed the HS-USB QDLoader 9008 driver was installed. so guess it was in EDL mode, then try to flash the stock ROM using MI flash tool And get the error " cannot receive hello pocket." "object reference not set to an instance of an object " so i try to flash using QFIL , still not get any improvement, so kindly guide any possible to unbrick my phone.
Hey there I'm kinda having the same problem, any progress on your end ? I waited a few days for the battery to die and then connected to MiFlash but it keeps asking for an EDL authorized account, which is apparently a rarity. Exploring other options such as bypassing EDL authorization, long shot but what could be worse eh ...
freeze1994 said:
Exploring other options such as bypassing EDL authorization, long shot but what could be worse eh ...
Click to expand...
Click to collapse
Could you solve the problem? I have the same problem. Did you find information or a method to bypass EDL authentication?
Anandkrish40 said:
i try to flash pixel experience, the developer guide to flash firmware+vender zip after flashing the ROM zip, as per the guide I flash the ROM ZIP and firmware zip, after flashing the firmware, mobile rebooted and nothing to show in display. so i try to force boot in to recovery. the screen nothing to show. so i try to boot on fastboot. still nothing to show in mobile screen even the fastboot logo. i connect my mobile to computer, and i noticed the HS-USB QDLoader 9008 driver was installed. so guess it was in EDL mode, then try to flash the stock ROM using MI flash tool And get the error " cannot receive hello pocket." "object reference not set to an instance of an object " so i try to flash using QFIL , still not get any improvement, so kindly guide any possible to unbrick my phone.
Click to expand...
Click to collapse
got any solution? same thing happened to me too, help please
help I have the same error, any solution?
Syden! said:
help I have the same error, any solution?
Click to expand...
Click to collapse
What version of mi flash are you using? If it is the one from 2017 then it will not work as it isn't compatible with EDL.
Update miflash to latest or at least 2018 version to use EDL mode