I am trying to install Remix OS on VMware in a host with these specs:
CPU: AMD phenom x4 965 black edition
RAM: 8GB
GPU: Radeon 6670
After install the OS I get these errors:
intel_poweclamp: Intel powerclamp does not run on family 16 model 4
intel_rapl: driver does not support CPU family 16 model 4
Click to expand...
Click to collapse
After that the screen become black and stuck.
So I can't install Remix OS on AMD cpus? Is there any way to fix the problem with VMware?
ppp99 said:
I am trying to install Remix OS on VMware in a host with these specs:
CPU: AMD phenom x4 965 black edition
RAM: 8GB
GPU: Radeon 6670
After install the OS I get these errors:
After that the screen become black and stuck.
So I can't install Remix OS on AMD cpus? Is there any way to fix the problem with VMware?
Click to expand...
Click to collapse
Remix OS supports AMD processors. These errors occur also with Intel processors that are not Intel Core iX "don't support Power Clamp". I have AMD Athlon QL-62 and I also get this error but Remix OS works quiet good. Add DEBUG=1 to the kernel parameters in the bootloader and report back the errors.
---------- Post added at 02:29 PM ---------- Previous post was at 02:27 PM ----------
It's also most probably a video card issue.
After adding DEBUG=1 to kernel parameters I see the errors:
VFS: could not find a valid V7 on sda.
EXT4-fs (sda1): couldn't mound as ext3 due to feature incompatibilities
found at /dev/sda1
Type 'exit' to continue booting...
Running MirBSD Korn Shell...
Click to expand...
Click to collapse
after typing "exit" it writes:
modprobe: Couldn't find probe module 'pcc_cpufreq'
piix4_smbus 0000:00:07.3: SMBus Host Controller not enabled!
init: property_set("ro.serialno", "") failed
init: /dev/hw_random not found
... more property_set errors ....
Click to expand...
Click to collapse
And then black screen and stuck...
Just noticed that also Android x86 not working with the same problem... What should I do?
I'm having the same problem with an ASUS k50ij. Worked fine on 2.0.10x/2.0.20x but has not worked on any version newer than that. Real shame too as Remix quickly became my favorite OS for laptops after I discovered it.
Remix Devs: I'm an engineer at a group of radio stations, so I'm fairly technically competent. Anything I can do to help, please feel free to let me know.
---More info---
Main OS on laptop is Linux Mint. I've installed remix using the installer to both a separate partition on the HDD as well as in the android [date] folder on the OS partition. I've manually installed. I've manually gone through and verified that everything is owned by root I've used both data/system images and folders (with and without REMOUNT_RW=1).
Related
I have partition the hdd drive, copy all files addroid Remix OS into that new partition , but i cannot create a new uefi boot entry by using EasyUefi, when I create new entry, after i choose type: Linux or other OS, decription, I cannot select the partition which have android system file.
When i use UEFIInstallerv23-5800.exe in the post: http://forum.xda-developers.com/android/software/winapp-android-x86-installer-uefi-t3222483 it is no lucky too! When i run UEFIInstallerv23-5800.exe, it check and note that, no all require element met please see the log. And this is the log:
================Installer Info================
Installer Directory:C:\Users\Kien-Ha\AppData\Local\Temp\droidinst_efi
Installer Version:2.3.5800.0
Secure Boot ... Disabled
Manufacturer: Acer
Model: ICONIA W511
Product: ICONIA W511
BIOS info:
ACRSYS - 3
V2.0
INSYDE Corp. - 52230011
Available GPU(s):
GPU: Intel(R) Graphics Media Accelerator
=============[REQUIREMENTS CHECK]============
Administrator privilege ... ok
OS Type: 32-bit!
CPU Architecture: 0
CPU Name: Intel(R) Atom(TM) CPU Z2760 @ 1.80GHz
CPU Architecture is not supported!
==========================================
Are there any one can help me? Sorry for my bad english.
Did you ever get anywhere with this ? I'm trying to do the same, I think it's the clover trail chipset that is the obstacle. Freezes after grub regardless of manual commands .
Can you post some screenshots.
---------- Post added at 08:39 AM ---------- Previous post was at 08:38 AM ----------
And check what kind of bios you have, it might not be Uefi
try RMXinstaller
imadlatch said:
try RMXinstaller
Click to expand...
Click to collapse
Hello kind sir,
I too have a Z2760 cpu machine and RMXInstaller does not work. Seems that grub is not at the right location in the iso and also not sure things are compatible with Remix OS v3. System.img is now system.sfs so an error occurs.
Would you please consider updating RMXInstaller to support 64 and 32 UEFI environments,? Thank you so much for considering.
Want a bigger data.img? https://www.reddit.com/r/RemixOS/comments/40xy2o/how_to_make_large_internal_storage_for_remix_os/ Use the IMGTools.
cd "C:\RemixOS"
dd.exe iflag=count_bytes if=/dev/zero of="C:\RemixOS\unformatted_data.img" count=68719476736
mke2fs.exe -F -t ext4 "C:\RemixOS\unformatted_data.img"
pause
64gb of data.img
After you get Remix OS installed. Don't reboot. Do this first. For Hard Drives only.
Note: Change the paths on the commands above.
Hi, did anyone get the fix for that problem. I have an Ativ Tab 3 running on the same processor chip i cant get to install x86 project rom.
Hi
I'm trying to boot up remix OS in HDD on a Toshiba laptop of 2006 with those specification
Intel Celeron M370
ATI Graphics
512 MB of ram
80 GB HDD
After successful installation it normally reboot to boot manager and I can select remix os to boot, and then it says:
Booting 'Resident Mode - All your data and apps are saved'
(hd0,0)
Filesystem type is NTFS, partition type 0x7
[Linux-bzImage, setup=0x3e00, size=0x4f4480]
[Linux-initrd @ 0x1b9d9000, 0x4b65ae bytes]
early console in decompress_kernel
input_data: 0x01556101
input_len: 0x004eb268
output: 0x01000000
output_len: 0x00a30490
run_size: 0x00adc000
Decompressing Linux... Parsing ELF... No relocation needed... done.
Booting the kernel.
Click to expand...
Click to collapse
Then there is a problem, because after 2 seconds it says:
[ 1.959044] intel_powerclamp: Intel powerclamp does not run on family 6 model 13
[ 1.961135] intel_rapl: driver does not support CPU family 6 model 13
Click to expand...
Click to collapse
I know that hardware is much weak, but seems like there are problems with powerclamp and intel_rapl, somethings related to driver.
There is something I can do to boot up Remix OS on this PC?
I have the same problem. But mine says "Cpu family 6 model 23"...
My laptop is a Samsung R430 from 2010.
Core 2 duo T6600 2.2GHz
6GB RAM
I'm trying to run it form usb though.
Sent from my G760-L03 using Tapatalk
Maybe some CPUs families aren't currently supported.
I could boot Remix OS on Intel Celeron 1007U x64 and on an Intel Core i7 2nd generation.
Someone can confirm?
hmm..
I also see this at boot... : intel_rapl: driver does not support CPU family * model * (intel d525)
But RemixOS 32bit is booting/working fine
Its some kind of cpu throtle driver ( to keep heat down ) if I read correctly
https://wiki.ubuntu.com/Kernel/PowerManagement/ThermalIssues
My system.. however.. is running cool (so, the driver is not needed)
A thought::
Try booting with : DEBUG=1
mitchell4you said:
hmm..
I also see this at boot... : intel_rapl: driver does not support CPU family * model * (intel d525)
But RemixOS 32bit is booting/working fine
Its some kind of cpu throtle driver ( to keep heat down ) if I read correctly
https://wiki.ubuntu.com/Kernel/PowerManagement/ThermalIssues
My system.. however.. is running cool (so, the driver is not needed)
A thought::
Try booting with : DEBUG=1
Click to expand...
Click to collapse
Uhm, thanks I'll try.
Where I have to add it?
Hi everyone:
I install RemixOS on hard drive following some directions found on XDA (http://forum.xda-developers.com/remix/remix-os/question-install-remix-dedicated-hdd-t3316527) to installs the system directly to hard drive without dual boot.
What i did was the following: After pressing TAB on Resident mode, i removed everything after "quiet". Then i put INSTALL=1 and then format to ext4 to use all the disk space.
The installer finalizes without errors, but when i restart and choose normal init at GRUB, the system stucks on flashing screen, then never enters to graphic env.
The things changes when i boot in debug mode. The system boot up completely but to console. I know how to use Linux, but this distro its very different to an standard one, so i need some directions to diagnose and solve the problem.
In debug mode, when i grep dmesg for error or warning nothing is found. All the devices are detected and aparently installed.
The only thing that got my attention when i installed Remix was the following messages:
- intel_powerclamp: Intel powerclamp does not run on family 6 model 15
- intel_rapl: driver does not support CPU family 6 model 15
But these msgs i suppose that are normal because is an old CPU that not support all the features that the driver does, right?
Anyway, these are the specs of the intallation:
- RemixOS version: B2016071501.
- CPU: Intel Dual Core E2160 1.68Ghz
- MB: Foxconn 45CMX
- GPU: Intel integrated on MB. I don't know the exact model
- HDD: 60Gb SATA
Any ideas to solve this problem?
Many thanks in advance.
I'm getting:
[ 1.211195] Intel_powerclamp: Intel powerclamp does not run on family 21 model 2
[ 1.212128] Intel_rapl: driver does not support CPU family 21 model 2
Any ideas?
Please use search... it has been mentioned alot
*it just means your hardware has no working powersaving/cpu throttling/temp ctl
So, if Remixos runs.. your cpu will run full speed.. (on a laptop/tabled undesirable)
If RemixOs boots.. and you wish powersavings.. then do a search.. some grub cmd do help
Goodluck
Ps... its wize to post your full hardware setup, so we know what works..and what not
The last update of remix 3.0.207 presents the following error or problem and does not allow me to start the system.
early console in decompress_kernel
input_data: 0x0000000001d123b4
input_len: 0x0000000000503357
output: 0x0000000001000000
output_len: 0x0000000001203958
run_size: 0x0000000000e6a000
Decompressing Linux... Parsing ELF... done.
Booting kernel.
[ 0869281] intel_rapl: driver does not support CPU familly 6 model 37.
If someone else has appeared the same error or similar, please let me know XD
I use an HP EliteBook 8440p Core i5, 8GB of RAM and a 120GB SSD and I made a 30Gb partition and I wish I could upgrade my system and receive updates without problems in the future.
What I can do?
Thorous95 said:
The last update of remix 3.0.207 presents the following error or problem and does not allow me to start the system.
early console in decompress_kernel
input_data: 0x0000000001d123b4
input_len: 0x0000000000503357
output: 0x0000000001000000
output_len: 0x0000000001203958
run_size: 0x0000000000e6a000
Decompressing Linux... Parsing ELF... done.
Booting kernel.
[ 0869281] intel_rapl: driver does not support CPU familly 6 model 37.
If someone else has appeared the same error or similar, please let me know XD
I use an HP EliteBook 8440p Core i5, 8GB of RAM and a 120GB SSD and I made a 30Gb partition and I wish I could upgrade my system and receive updates without problems in the future.
What I can do?
Click to expand...
Click to collapse
Same here, on a custom-built desktop, will post full specs when I'll get to my room.
For now, it's on my 4th hard drive, a 3.5" 7200RPM 80GB made by Western Digital.
I have a i3 540 CPU, with 6GB of DDR3 RAM.