:?: I have read it allready some where but i forgott where. Could some one give me one ideea?
Place to go is...works fine and is free..
http://www.pdagold.com
Soory Wrong [email protected] windows..
www.penreader.com
the software to make your XDA show sms senders name
which software on the above url allows u to read the mane of the sms sender. i looked around and could not find it. would it be possible if you could give me the exact url for the page the software is on.
thank you shammy :lol:
try this link
http://www.penreader.com/PocketPC/SMS_Name.html
inter your email/name ..
its shammy again, what it is that i have downloaded the file and extracted all the content. know how do i active that software onto my XDA.
thanks shammy :!:
just transfer the file into your xda my document then click on it after
that it will ask u to restart(soft reset) the xda ,,,thats it
Hi I also could do with some help on this, I have done the same, I have recieved the file by email, i have then unziped it then unziped again and this gives me 3 files, i put all of then into the "my Docs" dir on the XDA but none of them will run if i click on them, Please tell me what i am doing wronge
Thanks
John
u have to connect your xda to your pc with microsoft activsync 3.5
unzip the file then copy them into xda ,click on the sutup file
then system wil ask u to soft rest/restart and thets it
Just copy the *.cab file (containing 3 files) to your XDA and run it from there. (double click on the *.cab file while using the explorer of the XDA)
Greetings, Kaputter :shock:
Thanks for your help on this, I have done what you said and it now works fine
Thanks
John
I have done all the above, i have tryed putting the compressed file into my XDa and the uncompressed but i am not able to open the files because i can find them on my xda. could you please me find the files. thank you
shammy
[email protected]
please guest could you tell me how to get the sms message up
please email me at [email protected]
- Unpack the compressed file on your PC (if you have a ".zip" file), you should end-up with a file with a ".cab" extension.
- Now transfer this file to your device with ActiveSync, don't worry about the directorie, just put it on the device.
- Now, on your device, find the ".cab" file using the file explorer.
- Double click the ".cab" file, it should install itself.
- After this you can delete the ".cab" file but don't be surprized if it is allready gone, that is normal.
Now it should work!
I emailed you the file + the instructions
Related
Can someone teach me how to install rar files in my xda2? thanks
best should be to unpack the rar-files on your PC (with WinRAR), afterwards install the software (formerly in the rar-file)via Activesync.
If you have a cab-file in your former rar-file you might copy this directly on your PPC to install it directly from there (disadvantage on WM2003(SE)): will be installed into main memory, you have no choice to select your SD-Card when using this way)
thanks for the reply...btw, whats a cab file anyway? Im not really into this tech stuff
CAB files are similar to that of a ZIP/RAR file where you compress and store things into a single file. In the case of pocketpc, the CAB files are used as a SETUP.EXE , where is has all the necessary instructions and stuff to install the program. I guess.
thanks guys, You've been of great help. I was able to download winrar to open the rar files for installation.
I am very sorry that I put the new one webview.dll file in my phone....
I can't using sms now....I only can receive sms but can't write new and reply any text message....
Anyone can give me the original webview.dll file??
thank you very much!!!
REALLY REALLY THANK YOU!!!
The original webview.dll is still in your ROM memory. Simply delete the file you copied to Windows-directory, the original will be restored automaticly.
PAPPL said:
The original webview.dll is still in your ROM memory. Simply delete the file you copied to Windows-directory, the original will be restored automaticly.
Click to expand...
Click to collapse
Its not allow me to delete the file!!!
it say:"Cannot delete 'webview': There has been a sharing violation. The source or destination file may be in use"
but I delete it after I reset the phone...
after reset, I never do anything....
Could you mind to teach me how to delete the file?
PAPPL, thanks for your information!!!
I rename the file, then I can write text message!!
thank you very much!!!
how do you rename the file?
How do you rename/delete the file?
I'm rather new to these kind of devices so please excuse the ignorance.
I have an XDA Atom Exec, I upgraded to WM6 with this site successfully.
I also would like to install HTC Home and Customizer as I like the big clock and icons, however I can't seem to find instructions on how to install them. I tried using the search function but nothing came up.
Can someone explain it to me please? Thank you.
Have you downloaded the cab files for HTC HOME and CUSTOMISER , if so just go copy them to your phone and then navigate from the file explorer of the phone to where you have pasted , and run (tap) Hope this helps.......
If you have not downloaded them ....find Ironeagles thread on this forum , to find the links
Or you can download the cab from http://www.pocketemu.com/download8.html
Regards,
Carty..
Hi, thank you for trying to help.
I think the problem is that I can't run the "setup". It opens in Internet explorer just like on my PC, I downloaded another copy from Carty's site and the same thing happens. Do I need a special program to open the setup XML file?
Thanks again..
Carty said:
Or you can download the cab from http://www.pocketemu.com/download8.html
Regards,
Carty..
Click to expand...
Click to collapse
Hey Carty, I would like to ask about your Ultimate Theft protection. If I flash a new ROM, will it still be there?
xda noob said:
Hi, thank you for trying to help.
I think the problem is that I can't run the "setup". It opens in Internet explorer just like on my PC, I downloaded another copy from Carty's site and the same thing happens. Do I need a special program to open the setup XML file?
Thanks again..
Click to expand...
Click to collapse
describe in steps how you did your installation. we don't usually deal with xml files for installation.
jiggs said:
describe in steps how you did your installation. we don't usually deal with xml files for installation.
Click to expand...
Click to collapse
Well after downloading the zip file to my PC, I unzipped it in a created folder.
Sync'd my atom exec with the PC.
Opened File Explorer from ActiveSync, opened Program files on Atom Exec and just moved created folder with unzipped file into Atom.
After opened the created file from within the device and click "setup" with the stylus.
It opens up Internet Explorer and I can only view it as a document of some sort.
Hope that makes sense
No mate , you dont have to ZIP it (you are actually zipping the cab file which runs directly on the ppc , copy the .cab file without zipping it to your PC and then run ..)
This is what you do wrong
xda noob said:
Well after downloading the zip file to my PC, I unzipped it in a created folder.
Sync'd my atom exec with the PC.
Opened File Explorer from ActiveSync, opened Program files on Atom Exec and just moved created folder with unzipped file into Atom.
After opened the created file from within the device and click "setup" with the stylus.
It opens up Internet Explorer and I can only view it as a document of some sort.
Hope that makes sense
Click to expand...
Click to collapse
if you will list the contents of your zip file, that would be helpful. we don't normally copy files to program files for installation.
Thank you everyone... the problem was exactly what udayrulz was describing. I merely had to just move the file over to the device and click it, instead of unzipping, create a folder etc.
Thanks again, this plugin is much easier on the eyes!
No Problem , glad it worked out
Alrighty, here we goo.
I was looking around for voice to text apps, and I came across one.. called "Tellme"
Now, I as I understand this wasn't exactly made for my LEO-usa.
BUT IT DOES WORK.
I have installed the .cab file for this app, installed it correctly the only way one could do it. Then there was a file I was told to download called NETCFv35.wm.armv4i.cab.zip
Framework im guessing? But I have a problem, I don't know how to install this.. its a zip file, and when I unzip the file it breaks down the cab structure into 192380192381203981203498712348971230489 freaking FILES!
How do I install a cab file that is compressed into a zip file? if you HD2 users want to try and pickup where I left off, here you go.
do a google search for "tellme for hd2" Click the result that has tmobile's forums on it.
Scroll down the forum replies till you see words and convo's regarding TELLME. and you'll notice there is two files needed, the framework, and the cab file for the app.
I got the app installed, but the NETCFv35.wm.armv4i.cab confuses me because its a cab file that is in a zip file..
lol, sorry if I'm sounding redundant. but damn.
Heres the two files, I'll attach them below.
delirium5 said:
Alrighty, here we goo.
I was looking around for voice to text apps, and I came across one.. called "Tellme"
Now, I as I understand this wasn't exactly made for my LEO-usa.
BUT IT DOES WORK.
I have installed the .cab file for this app, installed it correctly the only way one could do it. Then there was a file I was told to download called NETCFv35.wm.armv4i.cab.zip
Framework im guessing? But I have a problem, I don't know how to install this.. its a zip file, and when I unzip the file it breaks down the cab structure into 192380192381203981203498712348971230489 freaking FILES!
How do I install a cab file that is compressed into a zip file? if you HD2 users want to try and pickup where I left off, here you go.
do a google search for "tellme for hd2" Click the result that has tmobile's forums on it.
Scroll down the forum replies till you see words and convo's regarding TELLME. and you'll notice there is two files needed, the framework, and the cab file for the app.
I got the app installed, but the NETCFv35.wm.armv4i.cab confuses me because its a cab file that is in a zip file..
lol, sorry if I'm sounding redundant. but damn.
Heres the two files, I'll attach them below.
Click to expand...
Click to collapse
no worries. just download the .zip file, then unzip it into the the file "NETCFv35.wm.armv4i.cab". next copy this file and the tellme.cab file into your phone. run the NETCFv35.wm.armv4i.cab first and let it install. then follow by the tellme.cab. you're done.
yea, you have unzipped it twice, because winzip/winrar also see the .cab as a cabinet, or zip file, and opens it, when in fact that whole file is the windows mobile installer. extract the single cab file to desktop, copy it to your phone, click it in explorer on your phone.
Alrighty, I tried what you said..
I got the .cab file for the NET stuff on the device, attempted installation and it failed at the end, told me to close out of apps, and clear device space?
I have a little short of 1gb of Device memory left, and task manager did not have anything running.
Is it perhaps the ROM im using? I'm using the Energy ROM.
bumppp.
Hi guys, im new to smartphone, how can i convert files from .rar to .apk?
if this question has been asked before just send me the link, i did tried to search and i did not find similar request.
Thanks
A "rar" file is a compressed archive, like a ZIP file.
www.rarlabs.com to download the program.
I open it with winrar and i cannot find any .apk file on it, i only see some meta-inf folder and .dex .xml and .arsc file.
any advice from experts?
thanks
See the tutorials link in my sig.
i do it this way !! u can either do it thru any file managers thru ur phone ( which is always better) or thru ur system.
just change the .rar /.zip to .apk
eg:- angrybirds.rar to angrybirds.apk !! simple!!
xarchitect said:
i do it this way !! u can either do it thru any file managers thru ur phone ( which is always better) or thru ur system.
just change the .rar /.zip to .apk
eg:- angrybirds.rar to angrybirds.apk !! simple!!
Click to expand...
Click to collapse
Thanks, this one work for me