Hi there,
I have again troubles with my XDA-Display.
After Loading my XDA´the Display has many Strips in all Colors and will not return to normal-mode.
HW-Reset, SW-Reset, New Flashing brought no result.
After opening the equipment I had briefly again a normal picture, but since that have I again only strips on the XDA.
Synchronise is okay, Backup I can do, but I have still no CE-Screen, only stripes. it would be beautifully if someone the problem knows and me thereby help could.
At The begin of Juny I had the same problem, but after switching on and of (ca. 100 Retries ) the XDA had the normal scren. But now the Xda will not go back to ormal screen
Best regards
Verena
): monitor problams
Hey,
im trully sorry for your XDA, i know how is it to lose a friend...
your problem is probably related to the very delicate contacts between the glass and the last display controller.
to verify that, open the equipment and hold your display GENTLY!while its on.
with two fingers along the edge, both horizontaly and vertically, and add a little pressure along the edges BE CAREFUL! you will see some changes on the display, if some of the strips will disapear, you will probably have to replace the display.
if there is no change while prforming the above, disconnect the big brown connector, clean it with alcohol and connect it again. BE CAREFUL while you handle the plastic cover. and generally with the motherboard.
if you want, i can help you, contact me:
[email protected]
i holp you will use it again
good luck
sonic.
now -> 2 hours later, I still sit by my XDA and wait for a normal CE- Picture on my Display.
Has somebody a tip or a solution to ix this problem ??
Its urgent !!!! -> I need this PocketPC for my work and training for MCSE
br
Verena
:x
Obermaus said:
At The begin of Juny I had the same problem, but after switching on and of (ca. 100 Retries ) the XDA had the normal scren. But now the Xda will not go back to normal screen
Click to expand...
Click to collapse
I'd say this is an intermittent hardware problem. You could check whether the keyboard cables are fitted well to the motherboard, and otherwise the unit needs a new display, which is expensive.
Don't worry about breaking any warranty seals: nobody in their right mind would argue with an MSCE, even when he's merely in training.
Thanks Sonic for your reply, I try to clean it....I think the problem happens, if the PDA in the loading station for more as 3 hrs. it seems to overload the accu..
br
Verena
Hi there,
perhaps has somebody another idea ?
Verena
PS: i` ve cleanad all parts, and the Display i think is okay, but Software or Accu ??? The Stripse stay on :roll:
I dont know if this will work with you But it did with mine.
Hi!
Try to reinstall your OS via an SD Card. I doubt you installed a new OS and had your installation interupted. This happend with mine and I lost my PDA for 2 weeks until i configured how in the world to restore the OS via SD Card.
All of the informations gathered here are all experimental to me and its scary sometimes to venture in solving your problems with thoughts that you might break your device by doing it wrong.
Take things as a learning experience including the risks involved. I'm sure you'll learn alot just like what I did. I solved my problems by looking at others' problems giving me ideas on the HOWs. This is my first time to participate by writing you. I had a similar problem seeing lines like i did with my PDA that wont even start...just the line displays. This should work for you.
See ya....
Related
Hi,
I got an XDA from eBay. When it arrive it had no battery at all. So I charge it for a while wuth a USB cable. The XDA switches itself ON ok (makes a ding noise) but when it arrives to the color screen everything is very fussy as something is terribly wrong. In details:
Have you ever set your PC monitor to a resolution that doesnt support? (aka in an frequency that doesnt support). If you do you will see several vertical (or horizontal lines) all over the screen and no real desktop items at all! That is how my XDA looks. The owner said that whn he post it for me it was OK??? Anyone knows what is this? Anf how to fix?
It seems like the someone tried to set very very high resolution and now the XDA doesnt dispaly anthing else apart color (vertical) lines.
Is htere is a file in windows CE that when I erase it can make the XDA to boot in "safe" mode in crap resolution?
Any help will be greatly appreciated, especialy if it comes from the developers,
Best Regards,
It is broken. I had the exact same thing happen to my Jornada twice. Seems it was caused by having it in my pocket rather than a case. It could have happened in the post--how well was it packed?
You should try a hard reset, but I'm pretty sure this is a hardware problem.
What u mean hard reset? How to try it? Any idea what your had? And how I can repair it apart the obvious (aka sending it to O2).
Regards,
Hard reset: Unscrew the top of the stylus, use the thin pin inside to push the button on the opposite side of the soft reset button, wait 15 seconds, push it again.
As far as the repair, I imagine it may just have been a broken connection, but I don't know. I just sent them back to HP.
Hi,
Thank you very much for your help. Actually did they ever told you whats wrong with the PDA? I mean, did they change the screen, or did they change the board or finally just repair the original board? If you had this issue again you probable have some idea. Eg if your IMEI is different after you got it back then surely they changed the board. I am asking this detail to see if its worth to send it back to O2 UK for repair. If they are going to change the board then... They told me that the screen costs 130 UK pounds but I dont thing that my problem is in the screen.
Regards,
It was a Jornada, so they don't have an IMEI. And they do advance replacements, so I never saw my actual unit again. No idea what they did or what was wrong.
You already tried the hard-reset? I've experienced a simular problem with the display after running JSlandscape. I bought my XDA only 2 weeks ago so the only remedy I could think of was a hard-reset which fixed the problem
Kamil
Display troubble
I have the exact same problem!
After having used my XDA for about 2 months the screen stopped working proparly a few days ago. Looks exactly the way you describe it!
I've done acouple of hard resets, now I'm waiting for the battery to get "empty". Hoping that may erase this problem. I know it's silly, but that is the only option left. I too bought my XDA on the net, and have no idea if there is any guarantie on it...
I now use an old Nokia.I miss my XDA
The hard reset switch does exactly the same thing as an empty battery. The units have a one year warranty.
sysop104, how much did you pay for it on ebay...
Did you know that if someone sells something that is knowingly substandard to you you can degrade their ebay rating, and claim £130 back from ebay as compensation.
You could always return it to the seller and demand a refund. It sounds like he didnt give you any of the manuals, as you were unaware of the hard reset function. More importantly - If he didnt pack it properly then its his fault. Did he use a registered postal service, was it signed for upon delivery, what was the condition of the packaging?
Unfortunately you get what you pay for these days, and given the complexity and fragility of this wonderful device, I opted for a new one under contract, I did toy with the idea of getting one on ebay though, having read this I'm glad I didnt.
Hi,
I have troubles with my XDA-Display.
After Installation and Start of a Autoroute Program my Display has many Strips in all Colors and will not return to normal-mode.
HW-Reset, SW-Reset, New Flashing brought no result.
After opening the equipment I had briefly again a normal picture, but since that have I again only strips on the XDA.
Synchronise is okay, Backup i can make, but I have still no CE-Screen, only stripes. it would be beautifully if someone the problem knows and me thereby help could
Best regards
Verena
If opening it temporarily helped, then I would suspect the screen cable may be loose. That is the large brown flat ribbon on the motherboard. The socket it goes into releases by flipping up the dark brown strip on top of it. Then remove and reinsert the cable, close the socket, and see what happens.
Thanx Carlos for your Reply - I tried to reconnect the brown Screen-Cable, but still its the same Problem. The Screen is nowere broken and the XDA did no fall down .
Perhaps Somewhere has(d) the same probleme ?!
BR
Verena
Sounds like the display drivers (the hardware) have failed. I think it's warranty return time, but maybe someone else can come up with an idea.
Warranty return is when the little sticker isn't broken, and you need to break it to get to the display connector.
Doesn anyone have a good source for warranty stickers? There must be special factories that make them. I'd like to convince one of these factories I do procurement for some major electronics firms, and get tons of different samples.
It's a common xda problem
I had the same problem and it was a return under warranty job for me - luckily I still had 1 month left on the warranty.
Googling around we're not the only people to suffer from this, it seems to have happened to quite a few xda owners.
See http://groups.google.com/[email protected]&rnum=1
and http://groups.google.com/groups?hl=...-8&[email protected]
and others.
It'd be nice to know what percentage of XDA's go like this- I get the feeling it's quite a few.
Hi,
This is a know problem. I am now on my 4th XDA, all have had the same problem with the screen. o2 seem happy to swap it out each time. Does anyone know if re-placing the screen will fix this?
Gil.
Warranty return is when the little sticker isn't broken, and you need to break it to get to the display connector.
Click to expand...
Click to collapse
Two answers...
Do companies in Europe really check this? I've opened exchanged quite a number of products that I've opened, never a question. I always figured those were there as a deterrent, nothing else. Actually come to think of it, I'm not sure that US laws would allow a company to void a warranty for opening a product unless it could be proven that it caused the failure.
On my US unit, the only sticker is on the screw on the MB at the top of the unit. You don't have to remove this to remove the display cable from the MB, only to remove the MB from the device.
XDA Display Problem
Now, after 4 days my XDA I switched off and on -> HAPPY - my XDA has the normal screen
Perhaps only Revision-Series have the problem ?
BG
Obermaus :lol:
Hi all !
Yes my hd2 freezes a LOT when it gets very hot while charging and also when i start it sometimes it vibrates 6 times and freezes without loading the system so if ther' any solution for that ? i installed the last GTX rom and also i did test the latest stock T-mobile rom with the radio 2.14.50.04 nothing changes it's freezing a lot.
Thanks in advance.
two possibilities:
1. one of you battery connectors might be bent (I've seen few threads on this issue here on xda)
2. faulty mainboard (been there) - if you Leo is under warranty, restore it to stock settings and send for repair
in the meantime you might consider using Battclock for battery temperature monitoring, once it gets to "freeze zone" switch your Leo off for a while or - if desperate enough - put it in the refrigirator (5 minutes should be sufficient)
p107r0 said:
two possibilities:
1. one of you battery connectors might be bent (I've seen few threads on this issue here on xda)
2. faulty mainboard (been there) - if you Leo is under warranty, restore it to stock settings and send for repair
in the meantime you might consider using Battclock for battery temperature monitoring, once it gets to "freeze zone" switch your Leo off for a while or - if desperate enough - put it in the refrigirator (5 minutes should be sufficient)
Click to expand...
Click to collapse
Thanks for your reply, i think the problem is coming from the copper pins as you said ( or connectors as you've said ), when i touch them the phone boots good, but it doesn't fix it i must always touch them and wait that the phones boots so, how can i fix thoses pins once and for all ?
Some users here reported freezings due to a bad Radio and ROM combination. Maybe you should downgrade to a different Radio and choose another (stock?) ROM?!
odoss said:
i think the problem is coming from the copper pins (...) when i touch them the phone boots good, but it doesn't fix it i must always touch them and wait that the phones boots so, how can i fix thoses pins once and for all ?
Click to expand...
Click to collapse
you could try to delicately straitghten the pins - I saw a thread on this somewhere here (here meaning xda/HD2 forum)
UP !
I still have those overheat issues i did verify the poins they are ok i did take it to a guy how fixes phones he told me he don't know ( i dont have a warranty ), if there any other solutions PLEASe help me...
Thanks in advance
We've had issues similar with the work HD2and it was resolved by replacing the battery.
How or why this came about was beyond me, but it must have been due to some of the idiots we employ playing about and not showing due care with the phone, so try a different battery, they are cheap enough
johnerz said:
We've had issues similar with the work HD2and it was resolved by replacing the battery.
How or why this came about was beyond me, but it must have been due to some of the idiots we employ playing about and not showing due care with the phone, so try a different battery, they are cheap enough
Click to expand...
Click to collapse
Ok i'll buy a new one and i'll try
between i saw a strange thing on the battery ( the battery is deformed at the top a small part ), the battery costs here more than 20$ so it's not that cheap here, but i'll buy it i hope it will fix the problem.
But tell me after buying your new battery the problem is fixed for good? no more overheating?
Thank you man for your anwser.
UP !
I did buy a new battyr today, no chan ges the problem is always the same....
so i very very sad after my last try, i must say now my hd2 is dead and with no warranty i can say Fu*k lol.
Thanks everyone for your help and i will never buy htc phones !
What actually happen? I would keep trying and if it won't turn on anymore. I would still try to claim warranty by htc. Maybe they are not gonna repare it to difficult. So they can't check for hspl. And then they maybe send you a new phone. As far as I know it doesn't cost your anything when they detect hspl. They just don't repair it.
The problem:-
1- restarts many times.
2-randomly shut down when i open Wi-Fi or apps or use it for more than 5 mins.
3-can't turn on sometimes and can't turn on using charger , only pc companion.
4-Burning Smell.
i know there's another thread talks about this problem but pleaese it's a serious common problem , i bought the mobile yesterday and i can't replace it , i've seen this post in SE forms : -
............................................................................................................
It cost about more than 2 hours,and i sat near the engineer looked at what he was doing,everything.
1. He said before this one,he has fix 4 x10 with the same problem.He checked my phone and told me he must take the phone to parts,i agreeed.
2.The restart problem is neither a software problem nor briefly hardware problem.The reason most likely is welding procedure .Between X10's CPU and the chassis on the M/B there is no bayonet(i'm not sure it's the right word), so the closeness of them only depends on colophony(another word i use google to translate it) and solder (the third one).He said when x10 is koncked or bumped,fissure or something others may appear,and when CPU runs at a high level,the ammeter shows a number above 200mA,you can think its fever.Because goods expand with heat and contract with cold，here comes the flexibility.It may influence the contact between cpu and chassis.So the restart happens. He get the CPU off M/B,clear and rebuilt solder on them very carefully,and packed everything back.THIS COST TWO HOURS.
3.When parts became back to a phone,I push sim card,sd card back,truned it on,it booted successed.Then i run the Backup and Restore app,no problem.Before repaired erverytime i run it, the phone restarted.view www web use the brower by 3G, opened servel windows,no problem;Played Asphalt 5 for 10 mins,the phone became hot,still no problem.So i paid for it and left.That cost fuxk 500RMB,nearly 100$!!!!!!!!!!
4.When the engineer was soleing it, i talked to him,he said G7 also has a lot of problem,G7 use the smae CPU as x10,it also may restart.
............................................................................................................
anyone tried this?????
please if anyone has fixed this problem (i know i can change the motherboard but it cost alot , I need Electric solve) . and it's not a software problem at all and n ot in the battry .
this is the best forms for PPC's so i don't have to post this in every site so better sign up and replay please maybe someone can help...
64 views and no answer -,-
and btw the phone works well when it's cold but it shut down when it's worm or using Wi-Fi or Calling . so to re-operate it you need to put it in air conditioner then but the battery back and switch on
So far no problem.
By the way the phone had no warranty?
yea , i bought it used and it looks that someone bought it from china and sell it here so the warranty doesn't cover my country.
thanx for telling me that x10 doesn't have another factory problems.
i send it today to one of those small repair places , they said the IC's are burned because of short circuit or something like that so we'll see what will happen tomorrow.
it cost me around 100$ but it doesn't matter as long it work.
sorry to say it but you buy cheap, you get cheap. might have to shell out for some repair work or ditch it and buy a new one. hard luck man.
hemo1001 said:
The problem:-
1- restarts many times.
2-randomly shut down when i open Wi-Fi or apps or use it for more than 5 mins.
3-can't turn on sometimes and can't turn on using charger , only pc companion.
4-Burning Smell.
i know there's another thread talks about this problem but pleaese it's a serious common problem , i bought the mobile yesterday and i can't replace it , i've seen this post in SE forms : -
............................................................................................................
It cost about more than 2 hours,and i sat near the engineer looked at what he was doing,everything.
1. He said before this one,he has fix 4 x10 with the same problem.He checked my phone and told me he must take the phone to parts,i agreeed.
2.The restart problem is neither a software problem nor briefly hardware problem.The reason most likely is welding procedure .Between X10's CPU and the chassis on the M/B there is no bayonet(i'm not sure it's the right word), so the closeness of them only depends on colophony(another word i use google to translate it) and solder (the third one).He said when x10 is koncked or bumped,fissure or something others may appear,and when CPU runs at a high level,the ammeter shows a number above 200mA,you can think its fever.Because goods expand with heat and contract with cold,here comes the flexibility.It may influence the contact between cpu and chassis.So the restart happens. He get the CPU off M/B,clear and rebuilt solder on them very carefully,and packed everything back.THIS COST TWO HOURS.
3.When parts became back to a phone,I push sim card,sd card back,truned it on,it booted successed.Then i run the Backup and Restore app,no problem.Before repaired erverytime i run it, the phone restarted.view www web use the brower by 3G, opened servel windows,no problem;Played Asphalt 5 for 10 mins,the phone became hot,still no problem.So i paid for it and left.That cost fuxk 500RMB,nearly 100$!!!!!!!!!!
4.When the engineer was soleing it, i talked to him,he said G7 also has a lot of problem,G7 use the smae CPU as x10,it also may restart.
............................................................................................................
anyone tried this?????
please if anyone has fixed this problem (i know i can change the motherboard but it cost alot , I need Electric solve) . and it's not a software problem at all and n ot in the battry .
this is the best forms for PPC's so i don't have to post this in every site so better sign up and replay please maybe someone can help...
Click to expand...
Click to collapse
my friend I am sorry but there is no quick fix for something like this. To repair SMT type circuit boards you need a clean room environment and also some very expensive equipment. My advice is to get a new handset, there are a few people on here that need some parts for their phones and you can off set the cost of a new handset that way.
thanx for the advice , i'll replace it with one that works and with a warranty . this will be my last time buying cheap S***, i really like it and i hope they release android 2.0 soon for it.
hemo1001 said:
thanx for the advice , i'll replace it with one that works and with a warranty . this will be my last time buying cheap S***, i really like it and i hope they release android 2.0 soon for it.
Click to expand...
Click to collapse
As I said there are people who need parts, so it will not be a total loss!
where are you located? I need a few bits.
Tomorrow i'll sell it with around 150 dollar, i'll replace it with another X10 but with WARRANTY this time
just found this thread and it seems to describe my problem with my x10. If the crashing is heat related would using a cpu underclock help?
http://forum.xda-developers.com/showthread.php?t=831658 for more info
my phone doesnt charge the battery, but charging animation is playing, gave to service centre,they told motherboard replacement,but that told we dont do for the handsets without warranty.... pls help how can i sort this prob.
I don't agree with the first post, I had this problem too, and the problem was bad, but as soon I as I flashed with the latest firmware, that problem seems to have been fixed, gone by 2 days without any restarts.
i also have this problem.
The worse is now my charged battery will become red low batt at first and recharge itself back to normal without plug in power...i think i just solve the world energy problem here.
May have fixed the problem, for a bit.
I bought one of these used (x10a), I basically got ripped off by some guy that must have known about the issue. Anyway, I tore the phone apart down to the screen, I left that intact. I cleaned the housing, motherboard and sound jack with compressed air (lightly), cleaned contacts that looked a little dull. I noticed the foil covering the CPU and other components was a little askew and there were some heat bubbles forming. I used a mini spatula as a squeegee and got rid of the bubbles, cleaned up the edges around the foil to insure they didn't contact their neighbors and put the thing back together.
Before this I could use the phone for a call for longer than 2 minutes, the second I ended the call it would crash/reboot. Same with playing games and listening to music at the same time. Movies, forget it. I don't want to curse it because it has only been a day, but no crashes yet and I'm doing/running everything I can to try and get this thing to crash. If it was the bubbles contacting other metal in the chassis then they will probably return sometime in the future.
Who knows.
For now, I say it's fixed. I hope.
I downloaded the schematic and disassembly, reassembly instructions off the net.
UPDATE: Cleaning did not work, I really didn't think it would but it was worth a try. I did however rebake the main board in my convection oven for 10 minutes at 210 degrees Celsius and it worked. I have uploaded videos to youtube. If you're like me, no warranty and don't mind tearing things apart. Check out my videos on youtube, do a search for MrSpywhite.
I had the same problem and SE replaced the motherboard.
spywhite said:
UPDATE: Cleaning did not work, I really didn't think it would but it was worth a try. I did however rebake the main board in my convection oven for 10 minutes at 210 degrees Celsius and it worked. I have uploaded videos to youtube. If you're like me, no warranty and don't mind tearing things apart. Check out my videos on youtube, do a search for MrSpywhite.
Click to expand...
Click to collapse
That sounds like good news, I have a friend with a similar problem, but his phone has the same behaviour faster than yours... did really work? any problems after the bake? (mic, speaker) ?
Sorry for bumping in a old thread but I am also facing the same problem i guess. Anyone got it to work ?
The motherboard is costing me Rs.8000 ( 160$ approx ) and its a 2 yr old phone. Cant spend that much now on such an old phone.
This solution might help on that cases, as main reason for such things are Pb free soldering (small balls between CPU and MB).
http://forum.xda-developers.com/showpost.php?p=37819145&postcount=12
Of course you do it on your own risk...
So my bro's had an Atrix for a little over a year.
Some time back, it started exhibiting this behaviour where the whole screen would just become totally unresponsive.
Searching around, I see issues where people lose responsiveness with a fraction of their touch screen, or the entire screen starts spazzing out with all these presses and swipe actions the user did not enter...
...but his just seems to have these periods. He'll be stuck at the lock screen from anywhere between 1 minute and a whole day... I can usually get it to work with random rapidfire hardware commands... and when it works, it works completely for a certain amount of time.
Thing is, that's only temporary, and the touch-screen ends up going back to an unresponsive state.
Any clue what's going on, or how to resolve it?
What's the software is he currently on? Is the phone bootloader unlocked and/or rooted?
Sent from my ATRIX using the Premium XDA App
You know what's (not so) funny about this? All of the things that you think are causing this sound really complicated. Is my phone corrupt? hardware defective?? etc etc.
You know what I found it caused this behavior after numerous factory resets and weeks of research and tweaks to my phone?
The f-ing goddam screen protector.
Yep, that's right. The over-priced, highly (over)rated $20 iShields brand one. I know for a fact that was the cause, after I figured it out and started talking to other atrix owners (minus the liar fanboys that lurk in every forum saying "works fine for me derp!" whenever someone dares to suggest a product has flaws).
Problem immediately went away, forever. I've gone naked since May /11 without a single scratch. IMO screen protectors on gorilla glass is for people who wear a seat belt in a car wash. I'm not sure, but I suspect the problem happens when the screen protector starts to age, and/or when it gets really warm. I also suspect it's a problem with certain phones and the types of touchscreens on those phones not playing nice with screen protectors. Started happening on mine after just one month.
omnius1 said:
You know what's (not so) funny about this? All of the things that you think are causing this sound really complicated. Is my phone corrupt? hardware defective?? etc etc.
You know what I found it caused this behavior after numerous factory resets and weeks of research and tweaks to my phone?
The f-ing goddam screen protector.
Click to expand...
Click to collapse
That rant's nice and all, and I'mma let you finish... but there's no screen protector. He's been going bare gorilla all since he got it...
Voelker45 said:
What's the software is he currently on? Is the phone bootloader unlocked and/or rooted?
Click to expand...
Click to collapse
Just to offer some backstory, this started a couple months ago back when he just had the stock AT&T rom (2.3.X or 2.2.X I think? I can't recall clearly) During one of it's "working" periods (last week), I unlocked his bootloader and flashed it with CM9...
Probably won't mean much since the problem existed before I unlocked+CM9'ed it, but while it's not freaking out, I can give you some numbers:
• Model Number: MB860
• Android Version: 4.0.3
• Baseband Version: N_01.77.15P
• Kernel Version: [email protected] #47
• CyanogenMod Version: 9.0.0-RC0-olympus-KANG
omnius1 said:
The f-ing goddam screen protector.
Click to expand...
Click to collapse
Yeh, I have had this problem with screen protectors interfering with capacitive screens before, I am now using some really cheap protectors (5 for £3) and have had no such problems since and have a good bit of pocket money left .
TLRtheory said:
That rant's nice and all, and I'mma let you finish... but there's no screen protector. He's been going bare gorilla all since he got it...
Click to expand...
Click to collapse
ah ok in that case, I have nothing else, I'm only good for ranting. GL!
My touchscreen randomly does these freak outs and stops working:
Usually for me it is caused when the phone is really warm (like on the charger in the car) or when my hands are sweaty (also could just be the the phone is warm in this case as well)
Once it's done with its freak out, I turn off the screen (my power button still works) and clean off the screen with my shirt, wipe the sweat off my hands and turn it back on...everything is then fine.
Also, with my old phone (dell streak) if I kept the phone in my pocket with the screen facing towards my leg it would exhibit this behavior (probably again a case of the screen becoming really warm) but if I kept it screen out it was fine.
I have the same exact problem and have gone back to my Captivate because I couldn't figure it out.
Sent from my Touchpad using XDA
News on this? Here's my experience.
Any news on this, guys? I'm going insane. Here's my experience: I used to get these touchscreen-stops now and then but then they started getting more and more often. What I do to make them stop for a while is a clean restore, that is wiping boot, system, preinstall, cache, userdata with fastboot before installing a new ROM or restoring from backup. Whenever I do that, it comes back to life. If I flash a new ROM without all those wipes, it doesn't work. What sucks so bad is that, even though that fixes the problem, it's only temporary. It starts again after a few weeks. There is NO way this is hardware, and there's also NO way we can't find a solution for this!!!! Come on, guys!!! HELP US OUT, PLEASE!!!!!!!
Have you tried the raindrop fix? I was having similar problems and it worked for me.
Sent from my MB860 using xda premium
My screen has ghost fingers if my hands are even the slightest damp.
A buddy of mine had really bad touch screen issues and had to send back for warranty.
Sent from my MB860 using xda app-developers app
I'm having the same issue
I'm having the exact same issue. It sometimes works, sometimes doesn't. Anywhere from one minute to a whole day, everything you described exactly. No screen protector. I wiped it once and it worked temporarily, but it's back to the old sporadic unresponsiveness again.
I'm still not convinced that it isn't a hardware issue. I'm going to buy a T5 Torx Screwdriver and open her up and see if one of the connections is loose. Has anyone else done this?
I'll post tomorrow night with my results.
Here is a handy trick to determine if your digitizer it going out.
1. Find an appliance like a cable set top box, AV receiver or computer for example
2. Lay your phone face down in the warm air that emits from devices like this.
3. Leave it alone for about 10 to 15 minutes.
4.Pick your phone up and perform some finger swipe heavy tasks.
If you notice its a lot more sensitive like you remember when you first got it then you have a digitizer that is going bad. If nothing changes then its most likely software related.
Okay so I took it apart (removed the motherboard, disconnected the radio and 3 cables, then put everything back together. It's not fixed 100% but it's a lot more consistent than it was. youtube dot com/watch?v=kxuF_73YIIY
cjmillisock said:
Okay so I took it apart (removed the motherboard, disconnected the radio and 3 cables, then put everything back together. It's not fixed 100% but it's a lot more consistent than it was. youtube dot com/watch?v=kxuF_73YIIY
Click to expand...
Click to collapse
Could be the ribbon behind the digitizer, if its loose or moves it can kill all response to touch. You may have to replace your digitizer to fix this.
Sent from my MB860 using xda premium
I'm dying here
I opened it up like the video explained. Everything looked OK. I used a heat gun at 50 C to eliminate any trace of humidity and put back everything in its place. Then, I did a full wipe and a new ROM flash. STILL NOTHING!!! This phone is a little over a year old! This is not possible :crying: Any new ideas???? THANKS!!!!
pichualvarez said:
I opened it up like the video explained. Everything looked OK. I used a heat gun at 50 C to eliminate any trace of humidity and put back everything in its place. Then, I did a full wipe and a new ROM flash. STILL NOTHING!!! This phone is a little over a year old! This is not possible :crying: Any new ideas???? THANKS!!!!
Click to expand...
Click to collapse
I would also suspect the digitizer. I replaced mine for $45 (frame pre attached attached highly recommended).
The connections are very small, so there is much that can go wrong while doing this kind of brain surgery and the ribbons will rip easily.
Sent from my MB860 using Tapatalk 2
Same problem here. It is like some Ghost is operating it without my permission
Sometimes feels like is should hit the phone on the wall.
I know its not gonna help.
Anybody there who has solution for this