get the upgrade file - RUU16006WWE_T-mobile_NL.exe
run the upgrade, wait for it to unpack, don't click on any buttons.
find the directory where it is unpacked, in
probably in "\Documents and Settings\yourname\Local Settings\Temp"
there should be a subdirectory, containing these files:
HimaClearJumpCode.exe
HimaGetDeviceData.exe
HimaUpgradeUt.exe
ms_.nbf
NK.nbf
Radio_.nbf
alternatively you can unpack the file with winrar.
to find the desired devicedata by copying HimaGetDeviceData.exe
to your device, and running it, it will create a file called
'\Windows\DeviceData.txt' this should contain the following
information ( you may need a hex viewer to see this )
"USB 32 1.60.00WWE "
"PH10" -> '-sd' option
"Qtek" -> '-so' option
"WWE" -> '-sl' option
"1.60.06"
"1.06.01"
download the upgrade.rar from this posting:
http://forum.xda-developers.com/viewtopic.php?t=4785
unpack it in the same directory, this will overwrite the
HimaUpgradeUt.exe with a newer version.
download xda2nbftool.exe from this page
http://www.xs4all.nl/~itsme/projects/xda/xdaii-update-format.html
decrypt the NK.nbf with:
xda2nbftool -d NK.nbf nk.nba HTC
modify the devicetype, operator and language strings in the nbfs:
xda2nbftool -sd PH10 -so Qtek -sl WWE -v ms_.nbf
xda2nbftool -sd PH10 -so Qtek -sl WWE -v Radio_.nbf
xda2nbftool -sd PH10 -so Qtek -sl WWE -v nk.nba
( this will also update the checksums in the files )
encrypt the nk file again, with the new password:
xda2nbftool -e nk.nba NK.nbf 921211
now run the upgrade tool.
ROM Upgrade 1.60.21WWE
Do I need to do anything else beside to double click the downloaded ruu16021wwe_dangaard.exe?
I'm a little anxious to just execute this file reading your 'how to install the t-mobile update'. Or can I just run the application, because it is an Dangaard Qtek ROM?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
that's great
Thanks
Othman
Thank you for all
I did the dangaard french upgrade with my MDA2 O2rom, and it works perfectly.
I had to change the language with xda2nbftool, but it was very simple.
One thing, freench rom is less complete than O2's, but I'm going to put some software on my viewable Extended rom...
Thanks a lot once .
Upgrading from WWE Tmobile160NL to new Danggard french 158
ainat said:
I did the dangaard french upgrade with my MDA2 O2rom, and it works perfectly.
I had to change the language with xda2nbftool, but it was very simple.
One thing, freench rom is less complete than O2's, but I'm going to put some software on my viewable Extended rom...
Thanks a lot once .
Click to expand...
Click to collapse
Hello Would you have a step by step guide to upgrade from Tmobile 160 NL WWE to the Dangaard french rom you are refering to? I'm a bit stucked, i have to admit
Awaiting your help, i remain
Arnaud
Rom Upgrade
I tried several times and I followed the steps. I keep getting this message . Image File Checksum Error The Rom image file to be used for the update is corrupt Download the correct Rom update and try again. I download twice and I am still getting the same error. Can u Plz assist me and tell me what could be the problem
Make shure you have the latest version of the xda2nbftool.
There was a problem with one version.
on which command do you get this?
can you run the above commands with a '-v' option added?
and download the most recent version from http://www.xs4all.nl/~itsme/projects/xda/xda2nbftool.exe
it is working
Thank u Itsme . I have used the new version and it is ok now.
sim tool kit help
I have two voice Gsm numbers in one simcard and I used to change from one to another using simtool kit . but then I upgrade my i-mate Rom(from carrier device) to new version of carrier device . then the prb starts. now if I want to move from one number to the other I ahave to do a soft rest after I choose the number. I cannot navigate between the numbers like I used to. I changed my Rom to T-mobile thinking it will solve the prb but the prb still remains. can any body help. maybe I can hear from Itsme .
thanks
Re: instructions + tools how to upgrade qtek 1.52 to tmobile
Itsme said:
get the upgrade file - RUU16006WWE_T-mobile_NL.exe
run the upgrade, wait for it to unpack, don't click on any buttons.
find the directory where it is unpacked, in
probably in "\Documents and Settings\yourname\Local Settings\Temp"
there should be a subdirectory, containing these files:
HimaClearJumpCode.exe
HimaGetDeviceData.exe
HimaUpgradeUt.exe
ms_.nbf
NK.nbf
Radio_.nbf
alternatively you can unpack the file with winrar.
to find the desired devicedata by copying HimaGetDeviceData.exe
to your device, and running it, it will create a file called
'\Windows\DeviceData.txt' this should contain the following
information ( you may need a hex viewer to see this )
"USB 32 1.60.00WWE "
"PH10" -> '-sd' option
"Qtek" -> '-so' option
"WWE" -> '-sl' option
"1.60.06"
"1.06.01"
download the upgrade.rar from this posting:
http://forum.xda-developers.com/viewtopic.php?t=4785
unpack it in the same directory, this will overwrite the
HimaUpgradeUt.exe with a newer version.
download xda2nbftool.exe from this page
http://www.xs4all.nl/~itsme/projects/xda/xdaii-update-format.html
decrypt the NK.nbf with:
xda2nbftool -d NK.nbf nk.nba HTC
modify the devicetype, operator and language strings in the nbfs:
xda2nbftool -sd PH10 -so Qtek -sl WWE -v ms_.nbf
xda2nbftool -sd PH10 -so Qtek -sl WWE -v Radio_.nbf
xda2nbftool -sd PH10 -so Qtek -sl WWE -v nk.nba
( this will also update the checksums in the files )
encrypt the nk file again, with the new password:
xda2nbftool -e nk.nba NK.nbf 921211
now run the upgrade tool.
Click to expand...
Click to collapse
You are so great!
Thank you very much, I've lost the way.
From O2 1.03.00 USA -> Qtek 1.60.00WWE -> T-Mobile 1.60.06
I found that Qtek is not suitable for me.
Thanks again.
Hi itsme, I run the HimaGetDeviceData.exe and my DeviceData.txt shows the following:
USB 32 1.03.00USA
1.03.31
1.05.14
Why don't I see your other lines
"PH10" -> '-sd' option
"Qtek" -> '-so' option
"WWE" -> '-sl' option
and what does PH10 mean ?
I got an XDA II from O2
help appreciated, thanks
my DeviceData.txt shows the following, too:
USB 32 1.03.00USA
1.03.31
1.05.14
but other people have the following:
U S B 3 2 1 . 0 3 . 0 0 U S A
P H 1 0
O 2 A S I A
W W E
1 . 0 3 . 4 3
1 . 0 5 . 1 4
why my uk o2 xda II miss the info????
maybe you are not using a correct file viewing tool? ( 'strings' for instance will not display strings shorter than 4 characters )
wit the '->' lines I mean 'this value goes after the ... option'
What's new in 1.60
I have a 1.52 Orange M1000 - and since Orange has told me, that have no plans to upgrade I am considering an update.
Could a kind soul please make a short list of changes/improvements from 1.52 to 1.60 ?
That would help me make a decision to upgrade or not.
Right now I have few problems..
Regards
Michael
oneall said:
why my uk o2 xda II miss the info????
Click to expand...
Click to collapse
You need a hex editor to properly view the file, like XVI32.
Can be downloaded @ http://www.chmaas.handshake.de/delphi/freeware/xvi32/xvi32.htm
failure to update asian O2 XDA-2 with T-Mobile 1.60
Tried to use this procedure to upgrade my revived XDA-II to 1.60 to no avail, the update procedure (taken from Update.rar) complains about wrong country code. My batch file to convert *.nbf files is as follows:
xda2nbftool -d NK.nbf nk.nba HTC
xda2nbftool -sd PH10 -so O2ASIA -sl WWE -v ms_.nbf
xda2nbftool -sd PH10 -so O2ASIA -sl WWE -v Radio_.nbf
xda2nbftool -sd PH10 -so O2ASIA -sl WWE -v nk.nba
xda2nbftool -e nk.nba NK.nbf 921211
My DeviceData.txt is as follows:
USB 32 1.03.00 USA
PH10
O2ASIA
WWE
1.03.43
1.05.14
Any ideas why it may happen? O2ASIA, WWE and PH10 are listed in HIMAUpgradeUt.exe
Use O2 instead of O2ASIA.
Jos said:
Use O2 instead of O2ASIA.
Click to expand...
Click to collapse
Thanks, it helped! Now we'll see if the result will be working with our service provider (they do not support any PDAs at all, even MMS does not work )
decrypt the NK.nbf with:
xda2nbftool -d NK.nbf nk.nba HTC
How to run xda2nbftool.exe? when i double clicking the file it just open up the command prompt in the background where I cannot access it.
Related
Do you want to upgrade from T-Mobile 1.60 to Dangaard 1.60.21???
This is what you have to do step by step:
1) download ruu16021wwe_dangaard.zip from the ftp specified in the post here in the forum
2) Unpack the zip file, then click with the right button on the extracted file (ruu16021wwe_dangaard.exe, make sure
you've winzip installed) and select extract to. Choose a folder where you'd like to put all the upgrade files
3) download xda2nbftool.exe from this page:
http://www.xs4all.nl/~itsme/projects/xda/xdaii-update-format.html and put the file in the
created folder
4) Open the MS-DOS prompt, go to the folder where all files are unpacked and digit the following
instructions:
xda2nbftool -d NK.nbf nk.nba 921211 (enter)
xda2nbftool -sd PH10 -so TMobile -sl WWE -v ms_.nbf (enter)
xda2nbftool -sd PH10 -so TMobile -sl WWE -v Radio_.nbf (enter)
xda2nbftool -sd PH10 -so TMobile -sl WWE -v nk.nba (enter)
xda2nbftool -e nk.nba NK.nbf 921211 (enter)
5) Now launch the upgrade file and enjoy!
This procedure could be adapted to any rom changes. The important thing is setting the right password for the HimaUpgradeUt.exe file. Pass is HTC for 0500 version and 921211 for 0600
version.
Many thanks to XDA developer Itsme for the support!!!
Thanks mate! I'll give it a try when I get home from my work.
Yesterday I unfortunately updated to 1.60 T-Mobile, So today I've started from T-Mobile 1.60 rom, then I’ve made all explained at the beginning of this post, ok?
But surely you can start from rom 1.52 and upgrade directly to 1.60, but you’ve to change T-Mobile with Qtek from the MS-DOS instructions, ok?
Hello:
What are the benefits of the upgrade? Is it better radio stack (GPRS and BT)? Is it the ROM itself?
Thanks for your input?
Fernando
So does this look ok?
http://www33.brinkster.com/popsiwarez/screen.jpg
(needs to be opened in a new window, please cut&paste to new browser window, ¤&/% brinkster)
Just thought the new CE image version looks a bit odd, but I guess thats what happended after the commands on the file, just wanna be sure before I hit the upgrade button. So after I have installed this T mobile upgrade the one from Qtek should work.. right...
Again thanks!
cannot access to the page you linked !
cannot access to the page you linked !
I'm sorry for my silly question. I got confused.
This method is for T-Mobile 1.60 to Qtek_Dangaard 1.60.21. However I can't find where ruu16021wwe_dangaard.exe is applied. I can see only the TMobile being extracted and updated. Does it mean we have to rea-apply the Dangaard update after this procedure? :?
Accessed!
Stop!!!!
It's wrong!!
From which Rom do you start (which is the rom you've installed?)
I got the T-mobile installed, and want the Qtek one...
You should see:
To:
CE Image version: 1.60.00
Extended image version: 1.60.21
Radio version: 1.06.01
Have you follow my instructions???
Sorry
There's a mistake in the rom link I've posted
The right rom image is the follow:
ruu16021wwe_dangaard.exe
Download it from the ftp indicated in previous posts
But you say you do the changes to the RUU16006WWE_T-mobile_NL.zip Sure you don't mean the Qtek one, since this is what I will install?
You'll find the rom here:
http://forum.xda-developers.com/viewtopic.php?t=4857
That's what I thought... Good thing I didn't install the modded T-mobile I made 8)
spanky said:
Sorry
There's a mistake in the rom link I've posted
The right rom image is the follow:
ruu16021wwe_dangaard.exe
Download it from the ftp indicated in previous posts
Click to expand...
Click to collapse
That's what i thought. Now I got it
Re: Read!How to upgrade from TMobile 1.60 to Dangaard 1.60.2
spanky said:
Do you want to upgrade from T-Mobile 1.60 to Dangaard 1.60.21???
This is what you have to do step by step:
1) download RUU16006WWE_T-mobile_NL.zip from the ftp specified in the post here in the forum
2) Unpack the zip file, then click with the right button on the extracted file (RUU16006WWE_T-mobile_NL.exe, make sure
you've winzip installed) and select extract to. Choose a folder where you'd like to put all the upgrade files
3) download xda2nbftool.exe from this page:
http://www.xs4all.nl/~itsme/projects/xda/xdaii-update-format.html and put the file in the
created folder
4) Open the MS-DOS prompt, go to the folder where all files are unpacked and digit the following
instructions:
xda2nbftool -d NK.nbf nk.nba 921211 (enter)
xda2nbftool -sd PH10 -so TMobile -sl WWE -v ms_.nbf (enter)
xda2nbftool -sd PH10 -so TMobile -sl WWE -v Radio_.nbf (enter)
xda2nbftool -sd PH10 -so TMobile -sl WWE -v nk.nba (enter)
xda2nbftool -e nk.nba NK.nbf 921211 (enter)
5) Now launch the upgrade file and enjoy!
This procedure could be adapted to any rom changes. The important thing is setting the right password for the HimaUpgradeUt.exe file. Pass is HTC for 0500 version and 921211 for 0600
version.
Many thanks to XDA developer Itsme for the support!!!
Click to expand...
Click to collapse
So here this should be:
ruu16021wwe_dangaard.exe
2) Unpack the zip file, then click with the right button on the extracted file (ruu16021wwe_dangaard.exe, make sure
you've winzip installed) and select extract to. Choose a folder where you'd like to put all the upgrade files
yes it is
Now I've correct the original post!
spanky said:
yes it is
Now I've correct the original post!
Click to expand...
Click to collapse
Nice work!!
Now is there somebody kind enough to cook a custom extended ROM (taking the best from O2, TMobile and Qtek)? i couldn't do it myself 'coz I do'nt have a Linux box..
Works flawlessly ... after having been a T-Mobile machine, my O2 XDA II now is a Qtek one ... hehehe
Unfortunately this did not eliminate the write protection on my Extended Rom.
I recently purchased an i-mate PPC with CDL's buggy ROM version 1.66 and would like to downgrade to 1.52 which I have downloaded from their site. The only problem is that shortly after it gets to the "Stage 1, erasing existing ROM", it aborts with Error CE 112, "perform soft reset and try again". The only option I have been able to do after that is to reload 1.66.
I figured this out and thought I would post my solution for others.
The 1.66 upgrade file from CDL uses a different version of HimaUpgradeUt.exe than the 1.52 version. So I had to unencrypt the files using the version level from the 1.52 release and then re-encrypt with 1.66 version level and then load the older(1.52) files with the newer HimaUpgradeUt.exe.
hi;
how did you decrypt and recrypt the files, did you use the xda2nbftool soft ware ??. Also, why didn't you think of upgrading to tmob 1.72 instead of downgrading to 1.52??
Yes, I used xda2nbftool. Pretty much followed the instructions from http://wiki.xda-developers.com/wiki/HimalayaRomFlashing.
I didn't go to 1.72 because I was concerned about warranty issues. I figured if I was only downgrading to CDL's own release, which is a solution on their site, I had a better chance of staying within warranty.
artiemon, if I can give you an FTP login/pass, would you be willing to upload a zip file with your modified .nbfs and the hima*.exe's so I can try to downgrade my phone. I've tried your instructions a few times but keep getting a verticle white line down the right of my screen. I'd very much appreciate it.
Jon.
Jon,
I deleted the nbf files when I was done, but here is specifically what I did to create them.
Download both ruu152113wwe_cdl-sku1.exe and ruu166131wwe_cdl_sku1.exe from clubimate.com under the device suport link. Run ruu152113wwe_cdl-sku1.exe and wait for it to unpack but don't click on any buttons. While the dialog box is still up, find the directory where it is unpacked in "\Documents and Settings\yourname\Local Settings\Temp". Mine was in a directory that started with pft.
The subdirectory should contain these files:
HimaClearJumpCode.exe
HimaGetDeviceData.exe
HimaUpgradeUt.exe
ms_.nbf
NK.nbf
Radio_.nbf
Copy them to a new subdirectory on you machine. From that directory, copy HimaGetDeviceData.exe to your PPC and execute from there. This will create '\Windows\DeviceData.txt' on your PPC. Copy this to your PC to determine the current Operator on your PPC. Mine was still CDL.
Get a copy of xda2nbftool at http://wiki.xda-developers.com/wiki/xda2nbftool and copy it into the new subdirectory with your extracted files. The 1.52 ROM version was encrypted at the 0.9.1.0 version of HimaUpgradeUt.exe, so decrypt the 3 files as follows from a command line in your new subdirectory:
xda2nbftool -x NK.nbf nk.nba 0x89124137
xda2nbftool -x ms_.nbf ms_.nba 0x25863614
xda2nbftool -x radio_.nbf radio_.nba 0x12345678
Since you are not changing Operators, you should not need to run the following, but I did anyway.
xda2nbftool -sd PH10 -so CDL -sl WWE -v ms_.nba
xda2nbftool -sd PH10 -so CDL -sl WWE -v Radio_.nba
xda2nbftool -sd PH10 -so CDL -sl WWE -v nk.nba
Now run ruu166131wwe_cdl_sku1.exe and wait for it to unpack but don't click on any buttons. Again, find the new temporary folder under "\Documents and Settings\yourname\Local Settings\Temp". The only file you need out of here is HimaUpgradeUt.exe, so copy it to your working subdirectory replacing the one from 1.52 ROM. The 1.66 ROM version was encrypted at the 1.0.0.0 version of HimaUpgradeUt.exe, so encrypt the 3 files as follows from a command line in your new subdirectory:
xda2nbftool -x NK.nba nk.nbf 0x20040304
xda2nbftool -x ms_.nba ms_.nbf 0x20040305
xda2nbftool -x radio_.nba radio_.nbf 0x20040306
Then all I did was run HimaUpgradeUt.exe from the command line and after about 75 minutes I had an i-mate at version 1.52 ROM.
Good luck,
artiemon
Well, I followed your instructions and still have a blasted white line running down the right side of my screen. I had another older version of 1.52 and it had the same problem.
I'm really getting annoyed!
Jon,
Are you able to load 1.66 as downloaded without any issues?
When I was originally having trouble with downgrading, I was always left with just a bootloader screen(1.06). But I could always get back to 1.66 without an issue.
If you can't get 1.66 to load, you may have a different issue than I had.
No, I can get the 1.66 to load back up without a problem, no matter what.
I don't really have any other suggestions for 1.52.
I did find that the bluetooth headset functionality in 1.52 was not acceptable and decided to go to 1.60 from O2. Here is the link. http://www.xda-2.co.uk/downloads/xda2_upgrade_download.html. I've been on it for 4 days and am very happy. It has an O2 splash at startup instead of i-mate and some other O2 specific junk I had to delete. The phone interface looks a little different, but it was way more stable than CDL's 1.66 and my Jabra headset is working great. Clear type looks pretty good too. If you're not to squimish about a non-imate ROM, give it a whirl.
I found a fix in 1.66 by changing a registry key to make the incoming COM port for bluetooth 5 instead of 4 (its under HKLM\Drivers\BuiltIn). You simply change the Index value from 4 to 5 and my sd-gps started working. I have a bad feeling my sandisk card is dead though.
Jon.
Hi all!
i have a imate pocketpc and made the upgrade from 1.52 (the rom i found in the device) to the o2 dangaard 1.60, with a file found here that was a convert.bat and a xda2nbftool.exe.
Now i would like to install the 1.72 upgrade from imate and i receive the already seen "country id error". Now, i tried to understand the page in the forum where it explains the way to use xda2nbftool.exe, but really i can't.
So is there anyone who can post again a convert.bat file (like the previous) to help me?
Or someone who can explain me,simply, how to reflash my rom?
Thanks a lot!
Mario
UP
Anyone who can help?
Thanks!!
Mario
You say you have the O2 Dangaard rom. This is impossible. This information is important for the convert.bat file, so which rom do you have, an official O2 rom or a Qtek (Dangaard) rom?
I have attached a file that you can use to upgrade an O2 rom, it will not work on a Qtek Dangaard rom, you will then have to change the words O2 into QTEK in the batchfile
QTEK to IMATE
I am using QTEK 1.66WWE, how do I do it? Please help, thank you...
QTEK to IMATE
I tried this... Hopefully it's work... Still upgrading, will update you guys...
@echo off
cls
echo ROM patch - Update from QTEK 1.66 to iMate 1.72
echo Tested only on Windows XP
echo Apply at your own risk. No warranty whasoever!!!!
echo press Ctrl-C to interrupt
pause
cls
echo Starting conversion ...
echo Converting ...
xda2nbftool -x nk.nbf nk.nba 0x20040304
xda2nbftool -x radio_.nbf radio_.nba 0x20040306
xda2nbftool -x ms_.nbf ms_.nba 0x20040305
xda2nbftool -so QTEK -v ms_.nba
xda2nbftool -so QTEK -v Radio_.nba
xda2nbftool -so QTEK -v nk.nba
del *.nbf /q
xda2nbftool -e nk.nba nk.nbf 921211
rename ms_.nba ms_.nbf
rename radio_.nba radio_.nbf
Del nk.nba
echo conversion finished!
echo DO NOT USE A USB HUB FOR UPGRADING!!!
pause
exit
It works!
I've tried on a QTEK 2020 form Dangaard Italy with "Versione ROM 1.66.04ITA"
The result now is:
ROM Version: 1.72.00WWE
ROM Date: 03/15/04
Radio Version: 1.14.00
Protocol Version: 1337.24
ExtROM Version: 1.72.126
The name of the file used for upgrading is: "ruu172126wwe_imate.exe"
It seems all working perfectly.
Thank you to all the guys of this Forum!
Hi there, I've got a QTEK with the same ROM as yours (pre-upgrade).
I'm also interested in upgrading to the (latest) engligh version.
Could you tell me exactly what did you do?
Is it enough to put the palm in the cradle, synchronize it, and launch the "ruu172126wwe_imate.exe"? (of course with a re-sync at the end).
Besides, does this software update also the phone menus?
Ciao e grazie.
Upgrading Instructions
Hi there!
I don't know if my way to upgrade could be the best one, but it works, and not only for me!
If you need more detailed explanation you can follow this link:
http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=61
Anyway this is the easy way I followed...
You must have three files: "ruu172126wwe_imate.exe", "xda2nbftool.exe" that you can get here: "http://wiki.xda-developers.com/wiki/xda2nbftool"
and a batch file that you can find above in this topic: "O2toIMate.zip".
If you have a different ROM (I had an original Dangaard QTEK ROM) you must edit the batch file.
In my particular case I used the batch file supplied by Wuga just above this post (thank you Wuga!).
Make a folder (i.e. c:\xdaup\)
Extract (I used winrar) all files from archive "ruu172126wwe_imate.exe" and put all them in c:\xdaup\ folder, together with the batch file and the xda2nbftool.
Execute the batch file and wait till the conversion job is finished.
The first part of ugrading process is done!
Now put your pda in its cradle, connect it by USB to the pc (DO NOT USE A USB HUB) execute the file "HimaUpgradeUt.exe".
Follow instructions.
Do NOT stop the process till it is finished!
The whole process is about 30 min. long
Good Luck!
Oh! Don't blame me if this instructions could seems you written by a novice, because... I AM a novice... )
Loxodont
Correct
Its the correct script...[/code]
@ Wiz & Loxodont
cheers people i now have the lastest rom on my phone and was simply done thanks to you two seems alot better then the o2 rom by far
Thanks Loxodont/Wiz
I'm now up and running with 1.72.
As said somewhere else, cleartype is awful...
But all the rest is fine.
And how about to change from XDA I Ger to Eng version how to do it
Thanks for the file! Your are the best!
After looking for some tuts on upgrading my mda II to wm2003se i destroyed my pda, well works pda but still mine and i'm gutted.
i downloaded wm2003se from here. After not being able to get anything to work i transfered the contents of the files to sd card. then i tried booting the files on pda.
I got to 1 of these
HimaClearJumpCode
HimaGetDeviceData
xda2nbftool
then the pda reseted to
a dead screen.
all i see at the top of the screen is seriel and at the bottom is v1.06 and if i plug the cradle in the serial goes to usb?
Can i fix this myself or is my boss gonna be having it in for me?
Regards.
1 thing i know for sure, i'll not do this again
This is file i dl
Himalaya_WM2003SE_Upgrade
Your device is in bootloader mode...
Put the XDa back into the cradle and on the PC start the upgrade program again.
Brgds
Pat
Yes it is stuck in bootloader. The problem i have when running the upgrade is that the upgrade is meant for o2 xda not tmobile mda II.
I know i need to change the id and have read the read me on changing the id but i do not know how to extract nbf files so i can do this
The nbf files are configured for operator ID O2 and language ID WWE. If you need to change these, carry out all the steps below. If they are OK for you, go straight to step 5.
1. Extract the decrypted versions of the nbf files by entering the following commands at the command prompt:
xda2nbftool -x NK.nbf NK.nba 0x20040304
xda2nbftool -x Radio_.nbf Radio_.nba 0x20040306
2. Modify the operator ID in the nbfs to the value you require by entering the following commands at the command prompt substituting <operator> with the required value:
xda2nbftool -sd PH10 -so <operator> -sl WWE NK.nba
xda2nbftool -sd PH10 -so <operator> -sl WWE Radio_.nba
3. Update the crc values for each of the decrypted files by entering the following commands at the command prompt:
xda2nbftool -c -u NK.nba
xda2nbftool -c -u Radio_.nba
4. Encrypt the files back into the nbf files by entering the following commands at the command prompt:
xda2nbftool -x NK.nba NK.nbf 0x20040304
xda2nbftool -x Radio_.nba Radio_.nbf 0x20040306
what am i supposed to do with this lot?
Yes, that's what you have to do.
You can also download the rom editor from here and change the values with the editor. Get the rom editor from here:
http://wiki.xda-developers.com/index.php?pagename=ER2003Edit
Good luck'
Patric
You can also download the rom editor from here and change the values with the editor. Get the rom editor from here:
http://wiki.xda-developers.com/index.php?pagename=ER2003Edit
Good luck'
Patric
Click to expand...
Click to collapse
Thanks dude, the error of my ways has been playing on my mind all day.
The Mda II is now working again and is all cool. I do have and O2 boot up screen on my T-mobile MdaII and thats cool cos my t-mibile sim card works aswell.
BUT!!
1 big problem we have is that 4 or 5 of our mda's have no camera function.
Upgrading the os was only to get the cameras working so that i could get my mates cameras working, now my Mda has no camera function.Lol.
forum.xda-developers.com has many files but there is so much to search through that i find myself going round in circles in the search. Can i please ask for more help in getting my camera working.
Regards
1 thing after another eh! I find myself buzzing with joy at my upgrade but still there is a darkness lurking.
Ps
ER2003Edit is exelent, a true life saver and so simple and easy to use, thanks to the creators on that 1.
Go to the FTP section
ftp://ftp.xda-developers.com
Login as xda and xda (all in small letters)
Go to the Himalaya section. You will find there many extended ROM for 2003SE to download. Download one EXTROM, open in EREDITOR and extract the Camera cab from there.
Install the cab on your XDA.
Cheers
Pat
Go to the FTP section
ftp://ftp.xda-developers.com
Login as xda and xda (all in small letters)
Click to expand...
Click to collapse
Exellant info, thanks. Luckily i know about ftp so i can now finish this post.
Thanks to all peeps who have given me there time!
Regards...Mike
Please help! Being an avid user (I really enjoy the old system environment I was using), but not that much of a "techie". I've managed to create for myself an interesting problem/ concern. I followed a link here in xda-developers and I foolishly tried upgrading my system through the following: Himalaya_WM2003SE_Upgrade and HIMA_WM_2K3_EXTROM. I need to and want to restore back to my old system. Please help me!!!
Note: Not being a consumate techie, but a user, I may have overlooked a something below... But I desperately need to restore.
"I obtained (with many thanks to fychan) a memory image of an English version of WM2003 SE which is an earlier version than the recent Chinese release, but it is genuine English. I managed to create an installable NK.nbf file from this. Also, mamaich has provided the version 1.18 Radio upgrade included here. Many thanks to mamaich for that and also for some advice when I was building the OS nbf file. Also, mamaich has provided some CAB files for Extended ROM which I have also attached here separately.
Attached is an upgrade for Himalaya devices to WM2003 SE WWE, Radio 1.18. Unzip the attachment into a folder of your choice. The nbf files are configured for operator ID O2 and language ID WWE. If you need to change these, carry out all the steps below. If they are OK for you, go straight to step 5.
1. Extract the decrypted versions of the nbf files by entering the following commands at the command prompt:
Code:
xda2nbftool -x NK.nbf NK.nba 0x20040304
xda2nbftool -x Radio_.nbf Radio_.nba 0x20040306
2.
3. Modify the operator ID in the nbfs to the value you require by entering the following commands at the command prompt substituting <operator> with the required value:
Code:
xda2nbftool -sd PH10 -so <operator> -sl WWE NK.nba
xda2nbftool -sd PH10 -so <operator> -sl WWE Radio_.nba
4.
5. Update the crc values for each of the decrypted files by entering the following commands at the command prompt:
Code:
xda2nbftool -c -u NK.nba
xda2nbftool -c -u Radio_.nba
6.
7. Encrypt the files back into the nbf files by entering the following commands at the command prompt:
Code:
xda2nbftool -x NK.nba NK.nbf 0x20040304
xda2nbftool -x Radio_.nba Radio_.nbf 0x20040306
8.
9. Place your device in the cradle, ensuring that the cradle is plugged directly into a USB port on your PC and not to a hub and that the power supply is connected to the cradle. It is also a good idea to disable any screensavers.
10. Run HimaUpgradeUt.exe
11. Sit back and wait for the Congratulations screen to be displayed on your PC. Your device will still be displaying 'Upgrading radio stack, please wait', but as long as the PC says it is done, then its all OK.
Notes:
a. I have installed this upgrade on my XDA II without any problems, and have also been able to revert back to the 1.72 ROM I had installed previously. I have bootloader v1.01, and I don't know whether it would be any different for later versions of bootloader.
b. After upgrading, a hard reset takes places and the Extended ROM is installed. I found that several applications caused a 'Application may not display properly.....' message box to appear which required tapping to dismiss. Therefore, you will need to make sure that TPDisable.exe is not run in the Config.txt script in the Extended ROM, otherwise you will not be able to respond to the messages.
Edit: I've created a .BAT file which can be run from a DOS prompt to replace steps 1-4...
Usage: OperatorUpdate operatorID
where operatorID is O2 or CDL or TMOBILE, etc.
Just unzip the attached zip file.
________________________________________
OperatorUpdate.zip
Description: Update operator ID in .nbf files.
Download
Filename: OperatorUpdate.zip
Filesize: 528 Bytes
Downloaded: 4289 Time(s)
________________________________________
________________________________________
HIMA_WM_2K3_EXTROM.RAR
Description: Extended ROM CABs
Download
Filename: HIMA_WM_2K3_EXTROM.RAR
Filesize: 2.88 MB
Downloaded: 9422 Time(s)
________________________________________
________________________________________
Himalaya_WM2003SE_Upgrade.zip
Description: OS and Radio
Download
Filename: Himalaya_WM2003SE_Upgrade.zip
Filesize: 17.52 MB
Downloaded: 17787 Time(s)
________________________________________"