Hello, I have upgraded my Siemens SX56, to 2003,I had couple of problems with this Upgrade, I restar my computer but now my phone got 4 colors screen "Whit, Red, Green, and Blue" with the title Wallaby Bootloader V5.15 and at the bottom GSM OK, What should I do. Thanks.
Just make a soft reset wqithout pressing the power button....
HTH
Stefan
Thanks, but, how put in my phone?
Soft reset is placing stylus in the hole on bottom left of xda, if that doesnt work you will need to reflash your xda using sd card method.
Sorry.Now, I save, the file in sd card, this is corret? and then?
You have to use xdatools to write the .nbf file to sd card, choose your nbf file as source and choose the sd card as destination, do not use the browse button in the destination box, use the drop down to the left of it, this will show your sd card, once it is written you need to put it in your xda, then enter bootloader mode, it will ask if you wish to continue the flash, press the action key and it will flash the rom, make sure your xda is charged.
Ok, thanks again, now my phone, coming up, but only see on window the screen pocket pc 2002 "Tap the screen to set up your Pocket PC" but when I tap noting, ActiveSync is connected and up date mi pocket, I supposed, I see in my computer and synchronized all. I try again to upgrade and I receive this.
your current device information:
Model : PW10A1
ROM Version : 3.17
Language : English
Your upgraded image information:
Model : PW10B1
ROM Version : A.30
Language : English
Please download the compatible utility and try again.
How make now?....thank you againt.
Sorry, now I restart in the battery on/off switch side and coming up and work, but, is possible upgrade this version?
ROM Version: 3.17.03 ENG
Rom date: 05/15/03
Radio version: A.33.02
Protocol version: 1.3.3
One more question, this phone is only 900/1900 MHz Dual Band, is possible open to 1900?
Tanks
Related
Here's something weird...
I have an early model PH10A XDA II...
was on ROM 0.81.00 USA
Radio: 1.05.09
Protocol: 1337.10b
Date 8-11-03
I'm trying to upgrade it to the latest i-mate ROM.
I have gotten to the point where it says "The current software is now being erased....the update should take 30 minutes." but the first time...it gave me an error and it asked me to reboot the device and try again...since then...
....it stays there for hours with no update, no errors, or feedback of any kind. All I get on the RUULog.log is "17:24:10 Connection with USB"..then nothing happens...
I have tried re-boots, hard boots, taking the battery out and waiting a few mins, making sure the battery is charged, I'm on XP and the latest Activesync 3.7.1, also I kill the wces...exe. app and still sits there..
I have tried the O2 version, the UK-02-version, himalayaupgradeut_197.exe...all to no avail...
Any other things I should attempt? I'm bootloader 0.23....
I'm still scouring the groups to see if anyone had this problem..
thanks!
re:Weird problem with early model HTC XDA II with 0.23 btldr
Thanks to these posts I can safely say I found a partial solution that works. From other similar posting, it seems the early bootloader 0.23 was a pre-release demo and not for public consumption...so this USB upgrade process does not work for this version.
What worked for me using this bootloader version was a combination of the posting here http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=93&PN=1 - using their choice #3.
1. Download ROM 1[1].72 SD.rar (ROM 1.72)
2. Extract ROM 1[1].72 SD.rar with WinRAR, you will find two files; ntrw.exe and ROM.nb1
3. Put them in any folder; say c:\ROM\
4. Go to DOS command and the folder contains the files
5. Type C:\ROM>ntrw write ROM.nb1 E: (Assume your card reader drive is E as shown in the below figure. Wait until finish writing the rom.
6. Put SD card into your XDAII, go to bootloader mode (Power + Reset + Directional Pad) and follow instruction on your device screen.
However, for this bootloader it definitely wanted a RAW formatted SD card, not a card formatted by XP/2000 card readers. I also tried other devices format Treo 600, etc...but what did the trick was to do a save to SD command using the USB/Serial program ROMUPDATE.exe located somewhere on this board.
This allowed the card to work with the bootloader...
Once this was done...I was able to insert the card on the card reader (and get an error - ingnore since it was raw format)...and type step #5.
Once this was done I was able to boot the device again.
To note..most of the solutions posted here work for public release bootloaders above 1.0...but this was an early release bootloader...and this is how you get this one to work. NOT using USB.
Now the next task is ...how do I upgrade the bootloader?
pda t-mobile mda ph10a
hi i have an old pda ph 10a ,and i want to know how to hard reset device, when i pres (power,navigation key ,and reset) mesage apears on screen says( serial v1,06) and nothing hapens
does anyone know how to reset and try to restore setings from pda (its on a german ,so that is more dificult)
removing SD card from device should solve your problem
pedjaar said:
hi i have an old pda ph 10a ,and i want to know how to hard reset device, when i pres (power,navigation key ,and reset) mesage apears on screen says( serial v1,06) and nothing hapens
does anyone know how to reset and try to restore setings from pda (its on a german ,so that is more dificult)
Click to expand...
Click to collapse
for hard reset u need not to press the navigation key just press power and reset.
and if this does not help try reinstalling the rom in boot loder mode(serial 1.06).
Hi over
I still have the same problem, my xda was all right when I tried to install an eglish version of the radio that works only in englang and eire, because I was planning to go abroad then, it broke down, I mean : the batery doesn't charge, I did a reset from that time it works only on the cradle or in rhe charger, it shows an old version of OS that dates :
may 2002, the phone doesn't work, it's very slow and it resets by itself.
My frend have an Imate I copied all what was in his device in an sd card within windows, it shos now some programs but still not recognized by ActivSync : 3.7.1,3.8, 4.1 versions.
could you help me please?
yours faithfully!
Looks like your Radio stack is broken. The radio stack also handle the charging process.
Isa your phone part still working?
When you´re doing a softreset, what Versions are displayed in the lower right corner?
If you just get the ROM Version and nor Radio Version you could try this:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
Stefan
Well!
the phone is not working, the dialog box is asking if I wanna turn it on I am answering yes but it won't go on.
the displayed version number -in the biggining- is 3 12 like that, and the date when it enteres OS is 20 May 2002. it's takining long time to respond, as I aline the screen to work with the stylus and try to configure some tasks and programs just for try, because it still doesn't connect to the pc, it reset by itself, then its always displaying the same version 3 12, the radio setting messages says : radio off, gprs off, phone off.
I think the operating system is seeking some files, because some programs displays a message like this: no application is associated with this program, run the application from it's location the try again.
but I don't know how to install the operation system because the device can not connect to the pc,
I haven't tried the wallaby special radion method.
Rom: 1.60.00 Ger
Datum (Date): 12/03/03
Radio: 1.06.01
Protokol: 1337.16
ExtRom: 1.60.08
---
At StartupScreen:
R 1.06.01
G 1337.16
D 1.60.00Ger
I have this T-Mobile Edition and try to upgrade this MDA with:
C_ShekharAKU3.5c.R40.P24_public
C_ShekharAKU7.0c.R40.P24_public
(Downloaded as recommandet here)
After doubleclick
Code:
HimaUpgradeUt.exe
the program start, but after a while it says, there is a error/problem, i should retry.
When I start to try something with the "bootloader" (on-switch, Action-button, reset) he explain me, i can´t install this version, cause the langua.
So pls. help a noob (first-timer of rom-modification), maybe u have a help-page in german too (Or step by step), cause all what i found at your wiki confuse me too much, cause i never heard somethin about this all - even how the extract a .nbf-file.
Thx for help
llbasha's guide
==================================================
6 steps to successfull Himalaya/WM2k5 upgrade.
==================================================
Note:
The Radio_.nbf is an optional component,
not included in this archive.
Get your favourite Radio ROM at http://buzzdev.net
====================================================================
1. Start your device in bootloader mode by pressing and holding down:
DPad + PowerButton + ResetButton
After a second release ResetButton, then release the rest of them.
Your screen will show word "Serial" at the top.
You are in bootloader mode now.
2. Place your device in the cradle, ensuring that the cradle
is plugged directly into a USB port on your PC and not to a hub
and that the power supply is connected to the cradle.
It is also a good idea to disable any screensavers on your desktop PC.
Once your device is cradled, the text on the screen will change to "USB".
3. Run HimaUpgradeUt_noid.exe
4. Sit back and wait for the Congratulations screen to be displayed
on your PC. Your device will still be displaying 'Upgrading radio stack, please wait',
but as long as the PC says it is done, then its all OK.
5. Detach your device from the cradle.
6. Now you have to hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
wow - ma, thx; perfectly :d:
It worked, no i have a version of 7.04.c, i guess win 6.0
---
Just few problems left:
1.) fixed
2.) Is there a german version anywhere???
3.) edit: my mistake; fixed
4.) I read, there is no problem of downgrade it (no, i don´t want), but from where i should get the german version for downgrading)
5.) My mda was without simlock (I could use every phonecard), i hope i still can ))
Edit2
6.) I have the program PowerLOC Destinator (a Navigation Program); when i would start, he tell´s me: Invalid PocketWizard Setup package
I guess Navigator is not made for win 6, cause the programm is the original sd-card
7.) At settings i can "switch" wlan; I guess this is just from the OS, cause as i know, a standart mda2 doesn´t have wlan
Background: A guy from phonecompany told me, that t-mobile, switched off the wlan-function, so that i customers doesn´tt know, that his pda can wlan (Branding of t-mobile); but the hardware is inside the pda; They made it at vario 2 and mda pro
Edit3:
Next Problem:
When i connect now the craddle with the mda, i get following error msg.
-Generic RNDIS (PROTOTYPE--Remember to change idVendor-
And ActivSync is not connecting
I duno, how to fix
ActiveSync 4.5 doesn´t work on my w2k-pc, and my mda sais he needs 4.5
With 4.2 and down, i can´tt connect the mda
Anyway, thx, thxy, thx, this was really a good describtion
I have a HTC HERM200, I did a hard reset, the problem is that no radio version and no protocol version displayed device information in parameters and of course impossible to operate my pocket pc as a phone and call using it !
I tried the hard spl 7.
for the 'info 7', this is the result :
HTC Integrated Re-Flash Utility, Common Base Version : 1.51d
Device Name: HERM100, Bootloader Version : 2.10.Olipro
Built at: Apr 22 2007 13:32:26
Copyright (c) 1998-2007 Modified By Olipro - Hard-SPL
CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x6
(in windows, my version of herm is 200, here with the info_7 command it is herm100 !)
when typing 'rtask a', the answer is always command error !!!
how can I install the radio and is there a good version of WM6 compatible with my reference ?? if you can help me this will great for me
thanks !!!
Try reinstalling the shipped rom. You can also try a radio only rom but if neither of these 2 things work, you have a brick on your hands...
Sorry...
reinstalling shipped rom
thanks ultramag69 for your reply,
where can I download a good functional and compatible version for the shipped rom to my herm200 and how to proceed. I tried different version with unsuccess.
I tryed the 'HERM_Radinly_1.56.70.11_CustomRUU' using my sdcard proceeding with renaming the file .nbh to HERMIMG.nbh, the setup stopped at about 10%, and still there for more then 2 hours !!
installing with the usb cable stop always with error#262!
I wish I have a brick on your hands, this means that there is a way to recover the phone operational state !!
"Shipped ROM" means the rom that came on your Hermes. Generally a carrier has its own rom (you should be able to find on the carriers website).
Since you have Hard SPL on your Hermes use the sd card method.
1. format sd card fat32, copy .nbh file onto it & rename to "hermimg.nbh". Put back in Hermes.
2. Reset into bootloader - hold power,, ok button above flywheel and reset with stylus. hold in until tri-colour screen comes up.
3. If you did 1st 2 steps properly then follow the prompts.
This may take a while for the radio to install so give about 20-30 mins. Make sure you do this with a charged battery.
If this doesn't work then I'm sorry, but you have a brick...
You can still install an OS only rom but you won't have phone functionality again...
You can also try a radio only rom.. Above conditions apply...
Good Luck.
I have this Siemens SX56 that I bought on ebay
say on information:
ROM version: 3.14.03 ENG
ROM date: 09/27/02
Radio version: 6.12
Protocol version: 324e4
I tried to look on this site but there are too many to read, please kindly someone can direct me to a direct link for the right version for me to download thank you
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz
sx56 problem
I downloaded the XDA-developers-SER-v12 for my siemens sx56...
the problem is that when i downloaded it and have it activated... the phone show upgrading...will take 5 minutes to do so and do not unplug... the thing is...it has been over 5 minutes and it still shows in my screen and i couldn't get to take it off...
now the thing is as soon as it unzips it says that i have to have my phone on active sync... i cannot do so since the phone is stucked... now when i try to cancel it it says "cannot open the ROM image file" please download and try again" so that's how it goes repetitively... what is the best way that i can do with this? if it ain't going to work.. i would rather just use it as an organizer like it used to...
is there anything i can do with this?
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
and if you want to unlock use the exe tool rather then a very very very old rom
like
XDA-developers-SER-v12
The code will change depending on the model of the mobile phone. Every step has to be carefully followed while unlocking the phone.
SX56 problems
Hi, I recently got a brand new Siemens SX56 from ebay. It was never upgraded to firmware. I took the task of upgrading this but something happened that killed the process. Now the device is stuck at this mode even after doing a reset.
My steps were, I updated Active Sync to 3.7.1 (the latest version) The device is happily communicating with my pc.
Then started the upgrade and the screen says "upgrading will take 5 minutes, do not remove device or uplug power...during upgrade process..etc"
The program says it encountered an error during the upgrade and basically stopped the process. I knew this was bad. The instructions told me to uplug the device from the usb cable, do a normal reset, plug usb cable back in, and then retry the upgrade utility.
It won't because no active sync can't see my device because the screen is stuck on that "upgrading takes 5 minutes screen"
Is this device basically dead? Please help. This was a clear upgrade process and clearly the process got an error.
Hello gybanez,
I had the same problem and was able resolve the problem.
You have two options:
1. you can send it to me and I will do it for free.
or
2. buy these:
a. MMC card (at least 64 mb)
b. buy a Card Reader/writer that supports MMC
c. go to www.xda-developers.com and download "XDA-developers-SER-v12"
d. extract the ROM from XDA-Developers-ser-v12 (.nbf file).
e. also download XDA-TOOLS (used to copy the .nbf file extracted to
your new MMC card on the Card reader/writer.
f. now insert the MMC card into your sx56 press reset and power button
at the same time and it should take you to a screen which asks you
to press "action button" to download and once done do a cold reset.
This should do the trick and afterwards if you want to upgrade and or
customize it go to http://lumpistefan.dyndns.org/ great site.
PS: If anyone wants to correct/add to this please feel free.
Regards, JOHNNY.
--------------------------------------------------------------------------
This was the same problem I had... so finally i got it all and had it transferred in the MMC card...
the thing...as soon as I run it...it get stuck on "SIR TEST : Supporting Running"
and another is that I am using Vista and downloaded the latest mobile sync... but it responds that it doesn't identify the HTC mobile... really sad... can someone contact me via YM: [email protected]
need help