Newb Serious problems with sound on MDA I help plz - MDA, XDA, 1010 General

hi community,
i have a very serious problem with the MDA I i bought over e-bay. I am totaly confused and i have completely NO idea what the source of this problem could be. You ARE my last hope !
The problem ist the following: all sounds on the MDA including the video streaming are somehow corrupted. At first (after a hardreset and even a rom update to ppc 2003 t-mobile germany) all sounds are very slow and deep. Then -in some kind of magic ways- as time passes the sounds are played always a little faster and faster. After 3 days or so the sounds are played constantly much too fast (mickey-mouse-effect). The same thing happens, when i record a notice with my own voice. If i use the telephone i can hear voices completely normal. So i really think, that it must be a hardware issue. Probably is the sound on the motherboard defect?
Or can really be a software issue and what could i try then ? As said i already tried numbers of hard- and softresets and have also flashed the rom with always the official t mobile updates. Can you help me ?

Yeap must be a hardware issue then!

Related

Speaker Turns ON Automatically & No Sound

Hi Folks~
I have an XDA (QTEK 1010) had been working perfectly fine, until yesterday. After taking a call, when I tried to make a call I noticed the Speaker Phone activated automatically. I can't hear anything even the tried to play an MP3 from the Media Player but still didn't work.
Then I plugged in the Hands-Free, could listen to the Sound but the Mic seems to be have been disabled. (Even after plug-in of the Hands-Free, the Speakerphone still remains activated).
Pl. HELP !
Thanks !!
the manual say something about holding down the phone button turn the speaker phone on and off
Doesn't work, I've already tried it
Btw am using the following, pl. let me know if the ROM/Radio Stack Versions have to do something with it
DEVICE : QTEK 1010
Model No.: PW10A1
ROM Version: 3.18.04 ENG
ROM Date: 05/22/03
Radio Version: 3.25.00
Protocol Version: 32S54
Thanks !!
You could back up your data and try a hard reset, a bit drastic I know but its pretty useless as a phone at the moment.
Apologies for the Information in Bit & Pieces (am a newbie).
I've already checked after Soft & Hard Reset to the Device, the problem is still there.
Regards
This is exactly what happened to me back in November, after my little Xavier (an XDA) went for a swim in a flooded gutter.
I'll bet that if you go into the Wallaby BootLoader and try the diagnostics, it'll behave itself.
Unfortunately, the news was not good for me: $1500 to have it repaired.
"Liquid Ingression", they call it. *grumble*
I decided against it. My XDA still works as a soundless PDA (or, as it turns out, a hopelessly overpriced Universal Remote Control).
deemacgee said:
I'll bet that if you go into the Wallaby BootLoader and try the diagnostics, it'll behave itself.
).
Click to expand...
Click to collapse
Can you guide me through ? How to run the diagnostics ?
Any help with the Diagnostics ?
I've tried over-writing the ROM, still didn't work ...
rana said:
Any help with the Diagnostics ?
I've tried over-writing the ROM, still didn't work ...
Click to expand...
Click to collapse
http://xda-developers.com/bootloader
Thank you!
Let me try it out .. :arrow:
Still not working ..
Should I upgrade it to PPC2003 from the YOrk Kitchen ?? Will it help resolving the problem ?
I was thinking if it could be bcz of a loose connection inside the device (altough the device never fell down since I've got it).
Any help would be appreciated.
Rgds/
There's a good chance that it needs vendor support.
Take it back to the place you bought it... if you didn't drop it or get it wet, the warranty should cover it.
Hope this helps. Good luck!
The problem is that there is no Local Support for XDA in Pakistan yet ...
The Only Option I've got is to ship it internationally, which would be Expensive :roll:
Just tried Updating the Stack, didn't Work either .. Pretty Strange what else could happen.
If I attach a Hands-Free I get to hear the Sounds, but no Sounds on the Speaker .. person calling me can't hear me nor can I hear them. The Situtation is same I try to make a Call "Speaker Phone On" Pops-UP.
Though I tried to records the Recording, When I speak while the recoding on the playback just gives a huffing sound, no clear Audio.
Stuck with an Expensive XDA with No Phone & No Speaker Sound !!!
From the limited information provided to me by the repair centre, and looking over the details on xda-developers.com, I think your audio chip (or something related to it) may have fried. Mine was caused by water damage... a lot of water damage, at that...
Without the Sound, there's no charm in using it anyways ... bought a new Nokia 6600 a few days back and am using it ... now waiting for the Battery to be drained & when re-charged expecting a miracle to happen
I hope it works again !! I love the XDA !
Guess What .. the XDA is working perfectly fine now.
The only thing I did was to place it in my Drawer for a couple of Days .. Keeping it outta my Sight )
Miracles do happen ;-)
I have this problem now... Although it has not got wet?? Exact same as described as above...
Although in bootloader diagnostics the mic/speaker work fine. When booted in to windows I get the speaker phone coming on automatically, and no sound
Guys,
This problem drives me crazy constantly. The only explanation I found (by empirical approach) as follows:
My XDA works fine always except at winter, when I stay outside, and the XDA surface covered with steam condensate because of temperature differences. Condensate may not be seen visually, but some electronics inside has short circuit or changes in chains resistance which cause XDA to think that ‘speakerphone mode’ is on and misbehave.
To resolve this problem I just keep XDA in the worm place (like stay in apartment) for 30 min and / or plug it to charger which bring XDA to normal mode (by warming it up and thus removing steam condensate). No other ways found so far.
Regards, Andrey
Let me know if you know how to resolve it once and forever (do not advice me to thru it out :wink: )
This solution doesn't work for me
Amazing.. I've tried banging my XDA off of my desk, sticking all sorts of crap in the headphone socket (at this point, I didn't really care if I broke it more lol)... nothing worked..
Then just now, I thought.. hm.. I'll just blow as hard as I can in the little hole... I did this for a good five minutes.. and it now works
:lol: :lol: :lol: :lol: :lol: :lol:

Newb Help pleaase ! Soundproblem with the MDA I

hi community,
i have a very serious problem with the mda I i bought over e-bay. I am totaly confused and i have completely NO idea what the source of this problem could be. You ARE my last hope ! :shock:
The problem ist the following: all sounds on the mda including the video streaming are somehow corrupted. At first (after a hardreset and even a rom update to ppc 2003 t-mobile germany) all sounds are very slow and deep. Then -in some kind of magic ways- as time passes the sounds are played always a little faster and faster. After 3 days or so the sounds are played constantly much too fast (mickey-mouse-effect). The same thing happens, when i record a notice with my own voice. If i use the telephone i can hear voices completely normal. So i really think, that it must be a hardware issue. Probably is the sound on the motherboard defect?
Or can really be a software issue and what could i try then ? As said i already tried numbers of hard- and softresets and have also flashed the rom with always the official t mobile updates. Can you help me ?

Sound goosed after upgrading.

I've upgraded my XDA II to 2003se (thanks to the Sin rom).
Whilst everything seems ok, and I dont seem to be having any of the problems other peeps are having, the sound has somehow been broken.
I use TomTom 3 on a regular basis. The voice instructions are crackly.
This was ok before upgrading.
I've also noticed other programs have the same problem.
I am not sure if this is a settings problem or if it is a problem caused by the upgrade or even if it's a known problem seeing as the 2003se rom isnt meant for the XDA II
Has anyone else had the same problem and fixed it?
Same problems mentioned already few weeks ago. Sofar no solution.
I've upgraded my Xda II with Sin's merged ROM as well, but I am not sure if my last sound problem was before or after the upgrade. However I do not think it has anything to do with the ROM, but the hardware itself.
My problem was all of a sudden, all sounds were crackly, and then after some time I noticed there was no more sound. Well, this had happened to me before, I suspected it was the speaker wire connection. Solution, press the speaker (between the two top buttons) hard, and try sound again. It worked.
Somehow Xda II did have this weakness of design, in terms of the wire connection for its speaker. But not sure if this is your problem.

[B]Bluetooth need to re-match after Prophet reboot or lost connection[/B]

With WM6, I had matched my bluetooth earphone with prophet,then I can see the BT headphone symbol on dialing menu.However, if I reboot Prophet, the connection will lost,when I making a call, it won't auto connect to my BT earphone(the WM5 rom did),I have to open setting->connect>BT rematch it to use my earphone.
The problem also happens if,
1.First build connection between phone and BT earphone.
2.Take away the phone only(far enough to let them unable to communicate)
3.Take back the phone and make a call. The BT connection won't re-connect untill you re-matching it.
It makes me very inconvience, thanks a lot if someone can help me to fix it.
Thank you!
I have the very same problem in all of PDAViet's roms. After soft reset the bluetooth partnership setting is gone (although the symbol of the paired device is still there..) I have asked for a fix several times but no one seems to care.. Very strange that only a few people seem to make regular use of their bluetooth headset....
jean-luc said:
Thank you!
I have the very same problem in all of PDAViet's roms. After soft reset the bluetooth partnership setting is gone (although the symbol of the paired device is still there..) I have asked for a fix several times but no one seems to care.. Very strange that only a few people seem to make regular use of their bluetooth headset....
Click to expand...
Click to collapse
Why do you complain so unsympatically? Remember that you flashed your device yourself. Nobody forced you, nobody let you pay for the software. You downloaded all by yourself a file that a smart person somewhere in Vietnam or Thailand or Russia or where ever, has put together becourse his hobby is to fool around with his PDA. That same person was so friendly to let the whole world join in on his party.
But don't complain when that person don't like to spend his time on your problems, for as far we know his doesn't have a BT headset at all and isn't interested in that functionality. It will become a whole different piece of meat when you had purchased the ROM, but you haven't....... did you....?
Cool...
rondol1 - I like your thinking, my sentiments exactly.
is there anyone can help?
Same sproblem with other bluetooth devices
I think it is not just a BT headset problem but a BT stack problem. I'm using a BT GPS and I had to re-pair GPS and Prophet each time I use (althoughit seems like it is already paired)
It is irrelevant maybe but similar problem exist on e-mails. I create an account for my email provider, download e-mails, but after a reset it looks like my e-mail setting are gone (have to re-configure it) But even when it seems settings are gone I can see it on my today plugin that I have such number of e-mails ( I can get to see them)
rondol1 said:
Why do you complain so unsympatically? Remember that you flashed your device yourself. Nobody forced you, nobody let you pay for the software. You downloaded all by yourself a file that a smart person somewhere in Vietnam or Thailand or Russia or where ever, has put together becourse his hobby is to fool around with his PDA. That same person was so friendly to let the whole world join in on his party.
But don't complain when that person don't like to spend his time on your problems, for as far we know his doesn't have a BT headset at all and isn't interested in that functionality. It will become a whole different piece of meat when you had purchased the ROM, but you haven't....... did you....?
Click to expand...
Click to collapse
I did NOT "complain" about the problem not being fixed so far, but about the missing reaction of some of this community when I posted the question about the status of this problem on new ROMs several times (which this forum should be there for) and there was just no answer at all. Because I do not want to flash my device with every new "release" only to find out that the problem is still there. I am indeed aware of the fact that not everyone is using BT functionality and that a new OS manually adapted to an "older" device is something that cannot be free of issues from the beginning.
Any change on this behaviour with the new PDAViet ROM 4.0.0.0.6 Touch? Anyone tried?
Same problem
Thanks for All and for every thing they did to make prophet for WM6 but this bluetooth problem is really killing me also every time i am using my car bluetooth i have to pair
Same problem in all rom's
Have tried almost all rom's, same problem.
The problem seems not to be releated to the diffrent BT stacks. Have tried different. Also it is not related to the BT devices. Have used Handfree. Stereo headset. GPS unit. Serial ports on remote PC etc. All have the same problem. Works when paired. Then after a soft reset unit are still in the BT list. But they have all have to be re paired to work.
Surely have something to do, with the units loosing most, or some of the settings after reset. Its an anoying problem, which we all will have to look into.
All the new rom's are nice to have, and to play with. But if we wants the rom's to be good for regular and daily use. We sure needs to fix this problem.
I will start to do my own little investigation, trying to fix the problem.
The problem is the same in all rom's. So if its solved in one rom, I'm pretty sure its solved in all roms. (99% sure , I think)
MaRyNoFear said:
Have tried almost all rom's, same problem.
The problem seems not to be releated to the diffrent BT stacks. Have tried different. Also it is not related to the BT devices. Have used Handfree. Stereo headset. GPS unit. Serial ports on remote PC etc. All have the same problem. Works when paired. Then after a soft reset unit are still in the BT list. But they have all have to be re paired to work.
Surely have something to do, with the units loosing most, or some of the settings after reset. Its an anoying problem, which we all will have to look into.
All the new rom's are nice to have, and to play with. But if we wants the rom's to be good for regular and daily use. We sure needs to fix this problem.
I will start to do my own little investigation, trying to fix the problem.
The problem is the same in all rom's. So if its solved in one rom, I'm pretty sure its solved in all roms. (99% sure , I think)
Click to expand...
Click to collapse
I know why this is but so far I havn't figured out how to solve it.... the problem is that settings are stored in the ram and not the rom... the way we need to get it to work is have the regestry moved to the extrom and that way it can be writen to directly without having to keep the regestry in the ram..... this can be done but I havn't fully understood how this is don't because I've been trying so hard to figur uot the X button problem... but I'm reading up on how to do that
gullum said:
I know why this is but so far I havn't figured out how to solve it.... the problem is that settings are stored in the ram and not the rom... the way we need to get it to work is have the regestry moved to the extrom and that way it can be writen to directly without having to keep the regestry in the ram..... this can be done but I havn't fully understood how this is don't because I've been trying so hard to figur uot the X button problem... but I'm reading up on how to do that
Click to expand...
Click to collapse
Thats correct. Seeting in RAM are lost, and there by Bluetooth pairing, email settings etc. Now knowing what causes the problem, some one clever, sure will some up with a solution. Will try to se if I can contribute with anything.
MaRyNoFear said:
Thats correct. Seeting in RAM are lost, and there by Bluetooth pairing, email settings etc. Now knowing what causes the problem, some one clever, sure will some up with a solution. Will try to se if I can contribute with anything.
Click to expand...
Click to collapse
Strange thing is, I've tried a few WM6 ROM, but never had any problems with lost emailsettings. I use it a lot, and just as everybody, I have to do a soft reset, once in a while...
So, the RAM storage as you describe isn't lost in all cases but also written to ROM.
As for BT I only use my gps-receiver and even that one only now and then It seems t work fine, but to be honest most of the time I've flashed my Prophet between several times....
I've the same problem with BT : always working with BT GPS, always loosing my BT Headset (try with 3 differents Headsets ...).
Be with devellop's team for correct this probem, and not with guy who critic this post without an BT Headset .... This is a forum and the critic is here to help the building of a 'very good' and more stabe as possible WM6 Rom ...
All together for the future ....
rondol1 said:
Strange thing is, I've tried a few WM6 ROM, but never had any problems with lost emailsettings. I use it a lot, and just as everybody, I have to do a soft reset, once in a while...
So, the RAM storage as you describe isn't lost in all cases but also written to ROM.
As for BT I only use my gps-receiver and even that one only now and then It seems t work fine, but to be honest most of the time I've flashed my Prophet between several times....
Click to expand...
Click to collapse
try change your battery or just pull out your battery overnight, i'm sure you will experience this problem. Sometimes on my phone when battery goes below 50% if I reset will loose setting sometimes. Just annoying but i can live with it.
The only way to keep your bluetooth, wifi and email settings all the time without worries is to use WM5.
If someone wants to try the bug, just soft-reset the phone while connected to the PC via activesync.
I guess that you will lose your settings (i'm not 100% sure because I'm now using WM5).
okeee.....
That are things I didn't try indeed. But at the other hand, what hould I want to do all that?
Tried the battery-change right away. Everything is still in order, no settings missing, time and date still as it should, email working as it allways did.
I did shut down my device first though.
rondol1 said:
Tried the battery-change right away. Everything is still in order, no settings missing, time and date still as it should, email working as it allways did.
I did shut down my device first though.
Click to expand...
Click to collapse
You might be one of the lucky ones then. I believe majority of us looses settings at various times. what model specs are your device do you have anyway? is it new when u purchased? the reason i asked cuz somewhere i read there is a "button cell battery" might be a wizard thing not prophet devices.
kenxu said:
You might be one of the lucky ones then. I believe majority of us looses settings at various times. what model specs are your device do you have anyway? is it new when u purchased? the reason i asked cuz somewhere i read there is a "button cell battery" might be a wizard thing not prophet devices.
Click to expand...
Click to collapse
I did buy my S200 new, without any branded OS, that means straight from Qtek. It's a G4, other specs Im willing to tell when you can precise what you want to know.
But... I don't want to be arrogant... when I read the many bug-reports I get the feeling that a majority don't use their device as it is supposed to. If you imagine that it is a small device with very limited hardware specs, it's not hard to understand that it isn't as foolprove as your desktop computer...
But again, it's just a feeling I get by reading many post, I also know that some of you have serious issues that cannot be explained from maluse point of view.

Phone mic voice too soft

My phone is giving me a problem in this area. When i talk on the phone (without using bluetooth or handsfree) people say i sound very far, or very soft. I've tried alot of different radios, and schaps diff versions. Including the latest 4.22ROM
Other then the rom itself i didn't install any other thing. But yet i'm still having this problem.
I've read in other topics that might be about setAcoustic.exe problem, but it doesnt' seem to solve my problem.
Anyone got any other suggestions? It's been causing me a big pain :
anyone know how to fix this??
update, it seems to be happening at random atm, some phone calls it's very clean, other it's too far..
hi, im having this same problem on my 8525. sometimes people can hear me and sometimes people can't hear me at all. any one else have this problem?
there was an old thread on this, search setAcoustic and you'll find it. if that fails , then i guess you can join me to wait for another solution
on the side note, bluetooth works nicely and i don't get any voice distortion or volume too soft.
Update:
So far things seems to be better atm, but it still happens. Sometimes while talking halfway, my signal can get very bad.. does this have to do with radio?
hey guys .... this is my first post here and i too am facing the exact same problem.... any solutuins? please HELP! (sorry for the caps)
Sylpheed said:
My phone is giving me a problem in this area. When i talk on the phone (without using bluetooth or handsfree) people say i sound very far, or very soft. I've tried alot of different radios, and schaps diff versions. Including the latest 4.22ROM
Other then the rom itself i didn't install any other thing. But yet i'm still having this problem.
I've read in other topics that might be about setAcoustic.exe problem, but it doesnt' seem to solve my problem.
Anyone got any other suggestions? It's been causing me a big pain :
Click to expand...
Click to collapse
Here's something to try the next time someone complains you sound far away/too soft: Switch over to your bluetooth handsfree without moving the phone. If you start sounding better then, I would guess that your built-in mic isn't working properly. You'd never know especially since you got it from eBay
Signal strength shouldn't matter too much, unless you start getting a marginal signal (say, one bar), and if that happens, try moving your head about (with your phone) - that should help the signal a little.
kltye said:
Here's something to try the next time someone complains you sound far away/too soft: Switch over to your bluetooth handsfree without moving the phone. If you start sounding better then, I would guess that your built-in mic isn't working properly. You'd never know especially since you got it from eBay
Signal strength shouldn't matter too much, unless you start getting a marginal signal (say, one bar), and if that happens, try moving your head about (with your phone) - that should help the signal a little.
Click to expand...
Click to collapse
haha yeah, recently it seems to be working though, a few times people called me and said can't hear me but i called them back and it worked.
well just an update, nothing seems to be working for me.
Flashing to the latest schap's rom = not working
flasing to other radio versions = not working
Changing to non 3G network, same problem
i'm beginning to be convinced that it might be my phone hardware that's screwed up.
now i'm flashing back to original official dopod rom. see if that fixes things.
Update: While installing my officail dopod rom, i realize that the officail ones install alot more stuff into my Dopod.
Is this normal/ as per compared to schap's roms?
this is the 1st time i'm installing a WM6 official rom, does it make any diff? Everytime you reinstall a rom = kinda like format drive C and reinstalling windows right?
If startup animation is enabled, and set acoustic parameter is not ran. You will have low volume issue. It is Rom/WM related, not necessarily a hardware problem. My Rom ahs startup animation disabled, acoustic parameter is properly set.
Second that, I highly recommend u all try k's 1.30b rom!
how do you make sure acoustic parameter is properly set?
bump.. any one figure this out yet? im tired of texting i just want to talk on my phone hahah. ive come to the point that im gonna buy a razr.
hi all, just another update.
things was working very well for a long while while using K's rom, but now it's starting to happen again while i'm on k's rom.
setAcoustic Param is done (i read in K's rom it's set properly)
anyone got any other suggestions?
update: I've been reflashing a few diff roms, apparently all of them have the same problem, including K's one which i see setAcoustic running at 1st run.
I really have no clue why my voice is too soft. Now i'm flashing the official HTC one, hopefully it works...
anyone got any new info on this? i'm still having the same problem
if it is an hardware issue, is there anyway to figure if it is an hardware issue? or how do i open my phone?
just another update.
Now my voice fades in and out.. it's literally mood swings.. sometimes sounds good, other times sounds bad..
but i'm resorting to use wireless for now. it seems that wireless is more stable. there was 1 time which i was trying to talk on the phone's mic but the other party couldn't hear me, so i switched to wireless immediate on the same call and the other party could hear me immediately.
I've changed countless of roms already, the problem is still there regardless of what rom, official ones from HTC or others cooked in here, (schaps, k's, and many others) i can only assume that my mic is broken....
this i'm in malaysia and this is a orange phone.. i wonder if i can get any warrenty here at all.. or someone that knows how to repair this phone..
Hopefully this will be my last update
I've sent my phone for repairs. hardware wise, they say they fixed it. After that, my volume is pretty stable.
There are once or twice that my voice still went out, however, i found out that by disabling WOW HD Settings, it solved my problem too.
So far, i'm happy with my hermes

Categories

Resources