Having found the excellent walk-through post on how to amend the nbf files so that the correct country code is set, allowing you to change ROMs to a none country ROM, I set about to try it.
And in fact, changing the files, and re-packing them, was not too bad.
Then I ran the upgrade program for the M1000 Orange Dutch (but WWE version) ROM, on my UK O2 XDA2.
And lo and behold, it no longer failed the country check, and proceeded to upgrade!
It managed to erase the current ROM no problem...
Then it started to install the new ROM...
And it got right up to a lovely 99%, and then hung for a while, before the installer program coming back with an Upgrade Failed error, and telling me to soft re-boot and try again.
Soft re-booting brought up the O2 'water' boot image, but with the ROM details etc re-written for the new verison 1.66 instead of 1.60 - but no backlight would come on, and it wouldn't get any further than this.
I had to go into Bootloader mode, to get it to try again.
And after three attempts, it ALWAYS fails at 99% of the ROM install.
So, does anyone have any ideas?
In the meantime, I am back to my O2 ROM, but I was led to beleive, from the tutorial, that ANY ROM could be used, as long as they were meant for a Himalaya device.
So, why does the Orange M1000 Dutch WWE 1.66 ROM, always fail at 99% when run on a UK O2 XDA2 1.60 WWE?
Anyone?
i think that other have don it without failure
could it be the file you downloaded which is a bit corrupt ?
try downloading it again
Sorry for the offtopic question but where did ya get the Orange Dutch rom?
I really would like to get that one...
Cheers
Panja
maybe dutch == danish
both starts with d and ends with h could be a mistake
from what i know the danish orange rom is the only one out yet but of cause i could be wrong
That would be the answer yes...
I am Dutch and check Orange once and a while and for as far as I know the m1000 isn't even released in Holland...
I just rang Orange because I can't get GPRS to work and I told them I have a XDA II, same as the m1000. But they couldn't help me because they don't have any settings for the m1000 yet...
Pretty g*y they couldn't help me
well what you need is really only access point
and depending on orange login and pass
Oops.
I meant Danish.
Second time I have done that this week.
Copenhaagen and Eindhoven - it's becuase they are so close together maybe *lol* ;-)
Rudegar, any ideas who the users were that got it to work, so I can ask them for the patched ROM files and try that?
m8
I got it to work!
Just download the update from the Danish Orange site.
Click here!
Panja said:
m8
I got it to work!
Just download the update from the Danish Orange site.
Click here!
Click to expand...
Click to collapse
I do what exactly?
If left as is, it won't work, as it fails the country check (er remember, it's a UK O2 XDA2 I'm trying to install it on here).
On the other hand, if I use xdatools to alter the nbf file, it allows me to run the install, but constantly fails the process at 99% of the first ROM install...
So, any ideas?
What device did you install it on?
i think he followed this guide
http://forum.xda-developers.com/viewtopic.php?t=8205
That's the very one I refer to earlier, that taught me how to change the country info.
The install fails on 99% though.
So Panja, have you got your extracted files to share if you put it on an XDA2 O2 as well?
Well I've downloaded the ROM upgrade again, and worked through the tutorial steps to change the device settings.
Can I just check something...
I currently have an O2 XDA2, and I am upgrading it with an Orange ROM.
When I enter the device settings, it IS "PH10 O2" I enter as the settings, NOT PH10 Orange, as I want the device to end up as it were. I do enter the device's EXISTING settings Panja, yes?
That's what I have done anyway - entered PH10 O2, so as I speak, it is busy wiping the ROM from the device, connected to my other PC.
I'll be sure to post back here if I manage to get past the 99% new ROM install this time, with a new ROM download, and a new attempt at altering the nbf files...
Wish me luck folks.
NEVER one to tempt the hand of fate, so I will start by saying it's not finished YET...
But it passed the ROM update ok, and now is onto the Extended ROM.
Keep wishing me luck folks...
Weh hey!
Nice new Orange XDA2, if I say so myself.
It looks a bit better, the proper Windows Mobile Boot Screen, than an O2 one, especially with an Orange SIM in...
So now I've saved the amended .nbf files on my PC, so that if needs be and a re-upgrade is needed, I can just run the installer, then delete the real nbf files and replace with my altered ones.
It's just busy doing a Sprite backup restore now - quality. Thanks everyone!
I'll repost back with my experiences of reliability and speed soon if I notice anything untoward...
Oh blast...
I've noticed something straight away...
The new implementation of Cleartype is TERRIBLE.
I can see blue edging to letters all over the place as it attempts to anti-aliase the font.
Previously with the O2 ROM and Cleartype, the letters were smooth, but black throughout...
I seriously think I will either have to forego using Cleartype, or do a ROM re-upgrade back to O2 at this rate.
Thanks for nothing Orange...
After all that, going back to O2 ROM.
Cleartype as per Orange's idea of it, is terrible. Blue all over black text, yellow on the white menu text, and sore eyes all round.
DOH
So now I have to go through it all over again to change the Country Code, to get the O2 ROM back on...
Great...
Sorry I couldn't help ya in time.
I'm sick @ home and didn't check the board till now...
Nice you got it finally to work.
Cheers
Panja,
Did you find the Cleartype as per the Orange ROM, to be unreadable, and full of colour cast?
Also, now that I have gone back to the O2 ROM becuase of the terrible Cleartype with the Orange ROM, do you know if you can just do an Upgrade whereby you only install the Orange EXTENDED ROM onto the O2 current ROM?
I have both ICQ and Messenger, if this is better for you...
I didnt use the cleartype on the Orange rom.
I swapped the Orange rom for the QTek rom.
Happy with the Qtek to be honist...
Related
O2 now have release an official update for all the Asia O2 user, you can download from O2 official website now. 1.60WWE and Java.
Do you have the exact URL. O2's site is NOT the most user friendly site to search for stuff. Thanks
You must go to the www.myxda.com then login then you can download the update. before that you must registed with O2 on the website then only you can login. I have update and work perfectly. Radio version 1.08 and the extended ROM 1.06.
Sorry man for sounding so thick, I did login, but for the life of me, I still could not locate where the file is. Perhaps I'm just blind
Thanks
Sorry got it. It's after you login, there's an arrow to the right of the screen. Click that and presto it's there. Gosh, I swear I didn't see that earlier.
can some one post the file here pleaseeee.... , i got my xda in hong kong i can't download the english version for O2 ASIA.
thanks in advance
Thanks very much Terence
I am a registered user but O2 didn't send me any notification to upgrade the ROM. May be they are worried about the internet traffic.
Anyway, thanks!!!
Cheers
nevermind, i got the file already thanks for the info anyway
I got the english upgrade, where can I upload it?
Moreover, anyone got the chinese version?
This is a real disappointment as some of us are already using the 1.60 (ExtROM 1.60.23) with Radio Version 1.80 and we're still facing the GSM problems like network dead with no notification ... etc. And this official release of ExtROM 1.60.44 seems to have the same Radio version, I guess the GSM problems are still not completely solved yet. And of course, no mentioning of bluetooth OBEX profile or handsfree profiel ?
Dear all,
Does anyone know how to backup the SMS database and restore after a hard reset? Thanks.
You can use Sprite Bakcup to backup SMS messages.
here it is .
Mates, this upgrade brought me close to a heart attack... :shock: started it and everything ran fine for 5 minutes... then it just stopped, informed me that the process died and asked me to perform a soft reset... :shock: since that didn't work anymore (obviously the delete of the current ROM already did something)... I stood there wondering... :shock: even a hard reset didn't do any good and just showed me some text on the screen... :shock:
After probably 12 cigarettes in 5 minutes, a restart of the PC and another hard reset at the XDAII which also left me with just the text message I tried it again... running now for about 30 minutes and being half through step 2 "Upgrading ROM image"... keep my fingers crossed...
Chris,
Reading the previous post and the revision history on the sprite website does not give me the confidence. Most report that after a restore the SMS is rendered incapable of receiving message. I have one chance to backup before hard reset upon upgrading the firmware. So I can't just take that risk. Thanks.
Regards,
Kueh.
Mine took about 60 minutes to install.
Everything seems fine, apart from the MMS composer will not load up, perhaps because I copied my old 'My Documents' folder back to the newly imaged Xda II.
http://www.mtekk.com.au/forums/viewtopic.php?p=5166#5166
Dave
If you have upgraded the O2 Asian ROM, can you please post its ExtROM version?
My friend has upgraded it but he said his ExtROM is still 1.60.23 and not 1.60.44 as claimed.
I am having 1.60.23 as well, that's why I am holding my horse as I see no difference or improvement from my current ROM.
chriswo said:
If you have upgraded the O2 Asian ROM, can you please post its ExtROM version?
My friend has upgraded it but he said his ExtROM is still 1.60.23 and not 1.60.44 as claimed.
I am having 1.60.23 as well, that's why I am holding my horse as I see no difference or improvement from my current ROM.
Click to expand...
Click to collapse
same to me chris.
i was so disappointed when i saw the official ROM is 1.60WWE.
guess we'll wait and see how this new ROM works and see whether is there any difference with our current 1.60WWE.
CONNED !!!
my first post and contribution.. hopefully it would be alot of help to other people..
this is the official IMATE 1.72 ROM...except that it was encoded to work with O2 XDA2 units
added the O2 splash screen to retain the O2 bootup image -just load O2.cab into your XDA2
the upgrade utility shouldnt show you any more country ID error for O2 XDA2 units.. if there are problems.. holler me ASAP!!
feedbacks would be nice, coz i would like to make upgrades for other Network providers as well..
Thanks for that.
Can you show me a step by step guide on how to upgrade O2 xda 2 1.60.WWE version to this?
Thanks again.
ok... im not an expert yet, coz i just had my XDA2 for a week, but i do enjoy tweaking and playing with it.. besides, the knowledge i gain thru reading this forum is more than enough..
ok.. here goes..
1. create a full BACKUP your XDA2.. (but i dunno if this is helpful should you fail to upgrade your ROM)
2. download the above file and extract it.
3. you should see it extract 7 files.
4. put your xda2 in the cradle connected to the PC
5. run HimaUpgradeUt.exe
6. wait around 30-60 mins. then follow the procedure as shown on your computer. (a hard reset would be required)
7. after the upgrade is done, you should see the IMATE screen upon booting up (instead of the O2 bubble screen) if you wanne be extra sure, check your XDA2 version.if everything is ok, then you should have upgraded it correctly
8. if you want to revert to the old O2 splash screen during bootup, then copy O2.cab to your XDA2 and run it there. Do a soft reset, and voila, it should be back to the old O2 bootscreen.
I suggest that you contact your NETWORK PROVIDER because you will need to manually configure GPRS, MMS, and INTERNET settings on your xda2 after doing the upgrade.
WARNING: i wont be held responsible or liable for failed upgrade of your unit. Please understand that by agreeing to upgrade your XDA2, you are taking full responsibility of whatever untoward incidents that may occur to your XDA2. Flashing the rom might lead to DATA LOSS, SYSTEM MALFUNCTION, and even DEVICE MALFUNCTION.
but.. the rewards of upgrading it is sweet!
Many thanks for all of these description.
BTW, how do you feel the upgrade?
What you really get from this?
Can you share with us?
Thanks again.
Cheers mate.
i dunno, im just a week old newbie in using XDA2 :wink:
i just enjoy tweaking the XDA..so far, no problems here.
My xda2 currently is 1.66wwe. after upgrade to 1.72wwe, what's the different between it? anything increase? sorry because i'm a new bird
did a lil research.. so far, came to this...
The 1.72 ROM eliminates the majority of problems from the 1.66 ROM such as:
Increased battery drain
Device slows down
Bluetooth GPS devices don't work, even with Pocket Bluetooth Tools
Can it be downgraded back to O2 xda2 1.60WWE Rom?
Many thanks.
i doubt that it can be downgraded... i havent personally tried to downgrade my ROM to a lower version.. but there are other threads related to this, and they claim that when they tried downgrading their ROMS, their XDA2 died....
you can try searching for other topics if there are information about downgrading... .so far, i dont have any problems with my 1.72 ROM...
except that there is no running program application which enables me to switch off any running program in the background.. but i easily remedied it by downloading TASKMANAGER.... its quite the same with running programs...other than that, so far, so good.
Error 121 Language ID Error
Hi,
after running HimaUpgradeUt.exe I get the message:
Error 121 Language ID Error (N-2-1-0-1), the ROM image that you are trying to use is not designed to work with your Pocket PC.
I ran ERedit2003 Version 1.2.20 and opened the file ms_.nbf using the password 0x20040305. I saved the file with the different language settings WWE, ENG and GER. Always the problem remains the same.
My XDA2 currently has ROM 1.66.01GER.
Thanks for help.
try to change the operator name , too! or use other hymalaya upgrade files, from other roms!
Re: Error 121 Language ID Error
GentleMan said:
Hi,
after running HimaUpgradeUt.exe I get the message:
Error 121 Language ID Error (N-2-1-0-1), the ROM image that you are trying to use is not designed to work with your Pocket PC.
I ran ERedit2003 Version 1.2.20 and opened the file ms_.nbf using the password 0x20040305. I saved the file with the different language settings WWE, ENG and GER. Always the problem remains the same.
My XDA2 currently has ROM 1.66.01GER.
Thanks for help.
Click to expand...
Click to collapse
hi, i tried encoding with it again.. please download it, replace the other files and try if it still gives you errors or not. thanks... ill be waiting for your feedback
Re: Error 121 Language ID Error > Error 120
Waxx said:
hi, i tried encoding with it again.. please download it, replace the other files and try if it still gives you errors or not. thanks... ill be waiting for your feedback
Click to expand...
Click to collapse
Hi,
Thanks. But now I get the message:
Error 120 Language ID Error ( N-1-8-1-8 ), the ROM image that you are trying to use is not designed to work with your Pocket PC. I tried with settings O2 WWE, O2 GER and O2 ENG.
When specifying CDL instead of O2 the error code changes to Error 120 Language ID Error ( N-1-8-8-8 ).
So the problem remains the same
Thanks for help.
Help for beginners: upgrading O2 Xda II to ROM 1.72
New to Forum-sorry to be slow on the uptake. I am trying to undersand how to upgrade O2 Xda II (ExROM 160.50) to ROM 1.72 without losing the machine. Waxx says you need to reconfigure the ISP settings (I assume because they are lost in the upgrade). I cannot find O2 settings for GPRS Interenet and MMS on the net. Talking to O2 is a waste of time.
Does anyone have a step by step description that results in ROM 1.72/Radio 1.18 (or lower if 1.18 still in beta) working on O2 Xda II?
Has anyone reported doing it sucessfully. Have non recoverable failures been reported?
RamyG
Just copy the attached CAB file across to say, My Documents on your XDA, and run it via FileManager.
It will customise your O2 XDA II with all the correct settings.
Once it has done that (and you've tested it works), just uninstall the O2 Active bit and your settings will remain (well they did on mine)
BTW - I upgraded to the new ROM, and have had no problems at all ! Very sweet
Mark
Thnx Mark, just to make sure before I jump in: the steps are:
(1) upgrade to 1.72 using Waxx's attachement (is that the file you used?) (2) follow the procedure you described and I will get O2 customised Xda II (same as where I started) but with ROM1.72 and later Radio Stack. Right?
2 questions:
(a) are the GPRS setting for MOBILE WEB (post paid)
(b) what benefits should I expect from the upgrade? (other than the satisfaction that it succeeded, l if it works?
thnx
RamyG
Yep I used the attachment from Waxx ...
The procedure you mentioned is correct ... I did have a few heart stopping moments after the upgrade because (like you) I couldn't find the necessary settings for GPRS etc .. but the O2 cab file re-installs everything back to what it should be for the UK.
You are prompted to choose relevant settings - in this case you get a choice from either post-paid (MobileWeb) or PrePay ...
As for benefits, people are reporting better bluetooth support, and better battery life. Only upgraded mine yesterday, so can't comment on either yet !
HTH
Mark
Has anyone else had problems charging overnight with the ROM version?
Got Error 120: Country ID error N-8-1-1-1
Hi all,
I am new member here. I did upgrade to ROM 1.72WWE and seems working fine. Because the PDA is idle, I try to roll back to ROM 1.60.44 eng. and got the country id error N-8-1-1-1. I tried to set the regional to English (UK) and English (US) but failed. Any comment? My XDAII is bought from Asia-HK. Thanks a lot.
Chris
Mark thnx for your help. For all those undecided souls I can report that Waxx's ROM 172 upgrade works fine for O2 Xda II. (BTW: it takes 3 times as long to upgrade as they say it does - it's 30 min for each of ROM ExROM and Radio modules).
Mark, O2.cab did not work as exepcted for some reason. When I ran it, it simple created a text file with O2 network config info and did not actually configure the Xda II. The info was correct and a manual config worked first time. Puzzled, I ran the O2 cab again but from another directory. This time I got the O2 spiral (I may have gotten the network configed again I can't know as I had previously configured it manually . The upgrade did lose the O2 dialer screen and reverted to the iMATE one. This is trivial. the Net is full of free attractive skins. e.g http://sourceforge.net/projects/pocketpc-apps/
Mark Peters- I thank you again.
RamyG
Hi all,
Have been mucking about with my Vodafone v1605 and the new HTC ROM. Had a play with the 'green' theme and decided to try and go back to Vodafon colours etc (basically the Vodafone extended ROM).
So, unlocked the Extended ROM, deleted the HTC stuff and replaced with Voda's. No problem.
When I hard reset the device it appeared to be loading HTC's stuff again???? I hard reset again and this time soft reset before the extended ROM could load. I now had a very vanilla WM5 setup
I now unlocked the ext rom again and went to re-import the Vodafone stuff...but it was allready there.
So - I ran the autoupdate and it stared to run. However, after a few secs it complained it could not find \Windows\vodafone.bmp. I ok'd and it carried on.
After all this I have a semi-vodafoned TyTN.
Anyone know what I need to do?? Does anyone have the vodafone.bmp so I may try again??? Is there an easier way to do this that I am missing???
Thanks - Rich
Some more digging found the following:
By simply taking any of the PNG splashscreens available on this site and calling it vodafone.bmp and placing it in the WINDOWS directory I can get the Vodafone extended ROM to run.
However, with teh ROM run I do not get the Vodafone theme or the phone skin or today plugins (guess they belong to the actual ROM not the extended). I do however get a 3 symbol....
In the end I gave up playnig and went back to the HTC extended ROM. Sure, green might not be 100% me but it's a nice change
R
Questions
Which ROm are you using instead the Vodafone one ?? Did you had screen calibration problems with the old ROM ? Changing the old ROM for the new one fixed this stuff ??
Ok this problem is related to the pre autorun issue that is availavail in the hermas verient....that means not only that the file willbe installed from the extrom bit also a part of extrom is kept in mail ce rom which will install before the installaton of ext rom...you can see it easily as the wait for 3 sec message after a hard reset will came twice the first time for pre autorum and second one from autorun...
now as u using the tytn rom s the pre auorun cnfig is still there which will install the green htc theme and default ie homepage and some other things like hsdpa anaval and some customised operator setting....so it doesnt matter what ext rom you use if u use the tytn main ce rom then u cant ignore them if not u reset just before first 3 sec wait massage and as a result u will not get the complete vodaphone ext rom addons as for vodaphone cd imate too there has some setting which relies on main image not on ext rom...
i think this explainaiton should clear it a bit..
thanks
I looked through as many posts as I could but maybe I'm not doing it right.
I flashed the android 2.2 ROM on my HTC HD2 from O2 but now I need to go back to windows 6.5 which was originally there. I dont have the official ROM and I would be very thankful if someone could send me the correct link to how to do it or how to get the official ROM.
Just a reminder I have an O2 HTC HD 2
Thanks to anyone and everyone who helps !
you didnt say which country, so i will assume UK.
first, run hspl.exe (the one you used when you installed hspl) but this time choose 2.08.0000
then
get 1.72 from htc website
http://www.htc.com/uk/SupportDownload.aspx?p_id=297&cat=2&dl_id=960
phone into bootloader, connect usb, run the 1.72 rom.exe
If you didnt mean UK, go to teh htc website, choose your country, choose your phone, click support, downloads, change the dropdown from 'all' to 'rom updates', find teh one that says o2 and use that.
thanku
thanks bruv ... ill look into it !
i still have an issue that the phone keeps restarting or gets stuck in a while !
There's a 3.14 rom, you could try that, but it could also be faulty....
Dear XDA Developers community,
my father recently gave me his old HTC HD2. It had its factory default stuff. I wanted to download some apps and play around with it, so I downloaded some apps from the marketplace. As soon as I downloaded a free Sudoku game, and ran it, the phone stopped responding. I tried to do a soft reset, but the phone did not respond either (it was stuck at the menu).
Now, I may have done an error: I removed the battery, instead of performing a Hard Reset. When I turned it on, it started rebooting in a loop, being stuck always at the HTC white welcome screen.
I decided for a Hard Reset. Well, it always gets stuck at the bootloader screen (the screen with the 4 colors).
So, I researched a bit, and found out, you can return to its stock ROM, eve with a stuck bootloader.
Well, I downloaded many old ROMS (the Rom before the problems was a 1.66 one), and ran the RUU through USB. But it always gave me a Incorrect vendor ID error (I think it was 194), so the update would always stop at 1%.
I even tried a 1.43 ROM.
I tried many WWE version Roms, but they don't seem to work. My father bought the phone on Amazon US, with no special contract or phone lock, so I guess it has to be a WWE, so I don't know why the RUU says it's incorrect.
I have seen other threads that have some similarities, but my exact same problem has not been addressed.
I would be very happy if you could help me, since I do not want to spend any money on repairs which I could probably perform with help of the community
I would be most glad to give more information if needed.
Many thanks in advance.
Edit:
The issue was resolved by installing HSPL4 on it, and then using a WWE 1.66 ROM on it! Silly me for not trying that earlier!
glad you sorted it, , to explain why it wouldnt work, you were not using the correct rom for that phone.
Your first clue would be the 'invalid vendor id'. An 02 phone (for example) will only take o2 roms, a tmo phone tmo roms, a voda phone, voda roms. Only unbranded phones take pure wwe roms, so for example
ruu leo htc wwe 1.66.405.2
see it says HTC in the filename? its for unbranded (not sold by a network) hd2s only.
I guess you have a branded one. (even if its been unlocked, the rom lock always remains, which is why we have hspl)
Incidentally, you only had trouble because you initially flashed from sd card, and step 1 in teh sd card flash is hspl gets removed, the phone restarts to continue flashing but because hspl is now gone, it fails. Had you flashed from usb teh first time, it would have worked.
samsamuel said:
glad you sorted it, , to explain why it wouldnt work, you were not using the correct rom for that phone.
Your first clue would be the 'invalid vendor id'. An 02 phone (for example) will only take o2 roms, a tmo phone tmo roms, a voda phone, voda roms. Only unbranded phones take pure wwe roms, so for example
ruu leo htc wwe 1.66.405.2
see it says HTC in the filename? its for unbranded (not sold by a network) hd2s only.
I guess you have a branded one. (even if its been unlocked, the rom lock always remains, which is why we have hspl)
Incidentally, you only had trouble because you initially flashed from sd card, and step 1 in teh sd card flash is hspl gets removed, the phone restarts to continue flashing but because hspl is now gone, it fails. Had you flashed from usb teh first time, it would have worked.
Click to expand...
Click to collapse
Thanks for the answer Samuel. I got the phone to work again, and I even loaded NAND Android from the DFTeam.
Although the ROM runs just perfect and I love it, now my Volume Up key has stopped working.
I could not post on the Development section, so I guess I won't bother anyone, and will just post it in this thread.
It is a minor issue, but it's still is annoying. I found on the forums problems with the key with other models, but not with the HTC Leo.
Maybe someone has heard of this. Again, thanks in advance!