i have recently updated to the WM2003 rom and noticed that there was a a CSD settings under connection settings. I was wondering how i can use my xda to connect my computer to the internet. do i have to buy additional cables or is the sync cradle enough.
Could someone also teach me how to use this feature
thanks in advance
shareez
you have to use wmodem s/w in PPC2002 only, it doesn't exist in any WM2003 ROM except the german ones or in XDA II
Exactly, as Bisc007 says, it can only be done with wmodem with some extra string settings on PC, or using serial cable and software available from wiki. XDA does not dial wireless connection while connected to PC by Activesync.
Related
I am using an XDA2 with a newly upgraded 1.60.00WWE ROM and was really pleased to see the update to Bluetooth to allow serial connections in this release.
I have a fax application on my laptop and want to connect the comport on the laptop to the BT comport on the XDA2
I click on the new checkbox 'Inbound Com Port' and everything seems well.
If I set up a dialup networking connection to an ISP, or try to fax, the port opens successfully but no data is passed from the XDA back to the PC, so the PC always thinks there is a hardware failure.
The same connection works well with a Nokia (but who wants to use a Nokia?
Anyone else having this problem, or can anyone offer some advice to get this running?
Mark.
O2 XDA2 on Orange
Hi,
I had a query. I use GPRS to surf the internet from my qtek 2020. I want to know If I can surf on my pc using ppc (GPRS) via the USB cradle, since I don't have serial cable.
I have read lots of discussions to surf the net on ppc using pc via lan/USB etc, but none where it says how I can use a USB cradle for the reverse process.
The reason for this is, I have unlimited usage scheme for my GPRS connection. (RS. 500 per month approx. 8-9 euros only). It is much cheaper than broadband connections, therefore I'd rather connect on my pc using ppc.
Thanks
Manish
if your xda2 have wireless modem installed then you can surf from your pc using the usb cable or bluetooth or seriel or what ever you like
Problem with Modem
Hi,
I'm trying to connect to the web via GPRS through USB and IR, but I am having no luck...
I have followed the instructions and used the files on the XDA official website, but everytime I try I get a message like error 732 or "could not connect to your device" the PDA flashes yellow for a few second before the error message...
Anyone elese had this problem? Is there a solution or do I need to upgrade OS? I still have a 1.53... Orange
Thanks,
Chris
read thumper's post he looks like he can get it to work
http://forum.xda-developers.com/viewtopic.php?t=9770
maybe he got some idears
I can now use my PPC as a Wireless modem with Ir
Thank Rudegar!
I read the post... at the beginning seemed out of topic, but then I have found the clue!!!
I think the proble was releted to the use of the SPB GPRS software... I could coonect to the GPRS service from the phone, but not using it as a modem... maybe we should tell it to the SW producer?
I also found out, strange, that the dialing string (the one with the APN" was within an extra set of "" which I don't remember to have inserted...
ANYWAY NOW IT WORKS!
Next step is to get it to work through USB... is that SW was the problem I'll have a positive answer soon!
Thanks again,
Chris
Hi.
I have already download the new w2k5 to my XDAII and now I can´t wyncronize it via USB with the new ActiveSync 4.0
I have tried via infrared and it works, but when i put my XDA II in the credle, and I try to do it via USB it doesn´t works... Any idea?¿
Thanks
are u sure the File/Connection settings/allow USB connection is checked??!!! :wink:....... otherwise,u cannot synchronise via USB...
RAGO :lol:
Yes, everything it´s ok
I don´t know what could it be... Maybe reinstalling activesync 4.0...
thanks 4 all.
The problem with the USB conection of my xda II and activesync 4.0 still kickin´...
I have read something abaut the same problem in another post? Or it´s just a dream?
Thanks.
It's kinda strange what's happening with u... :?
Now am not sure,but try the following:
*u must have service pack 2 installed(it's a prerequisite)
1-on ur mobile:go to active sync/menu/connections check synchronize all PCs using this connection,and in the window tab below choose USB.
2-try changing the USB port on ur PC.
3-try restarting ur PC,and ur mobile as well...
4-make sure the File/Connection settings/allow USB connection is checked
5-make sure ur cable is functionning well(try another device if u can,or another cradle if possible)
Good luck....
RAGO :lol:
I´m trying to synchronize in a IBM T21 Laptop... Maybe USB 2.0 not soported? Does anybody knows if ActiveSync 4.0 and wm2k5 only works with USB 2.0 ?
Many Thanks
spend some time today to make it work.
first check on device manager if under network adapters exist "windows mobile-based device" and is ok (not with ! sign),
then go to control panel at network and internet connection > network connection.if you have network card there will be one local area connection (or maybe much depend how many network cards have in pc).when conected pocketpc (wm2005) will create another local area conection,connect and disconect to see what number have ex. local area connection 2.right click properties then better tick on show icon on notification area to see what is about connection.go to advanced windows firewall >settings.at general tab turn off,at advanced tab unmark this area connection only,( I want to say to unmark local area connection 2 or what number have this connection between pocketpc and pc) leave marked other local area conection (if is present) to keep protect your pc from outside.press ok in that window,now you are back in properties page check at general tab >tcp/ip protocol > properties to be selected obtain an ip address automatically press ok ok again. now in pocketpc go to start > settings > connections > network cards here select connect to "work" and adapter remote-ndis host select "use server assigned ip address" ok ok again.dissconect and connect pocketpc to pc.look at taskbar right-down corner of monitor,near clock,you should see appear network connection icon.first time at every connection between two little monitor will be a red dot going from one to another,in this time computere search for dhcp server to receive ip address,in short time (4-5-6 seconds) link will be active icon will be clear not fading like previous and the two monitors will blink.if this is not happened check on control panel > Performance and Maintenance > Administrative Tools > services if dhcp client is started,if not start it manual and change startup type to automatic.if until now everything is ok disconnect pocket pc, dezinstall old version of active sync install version 4.0 build 4343 restart pc.after pc started up connect pocketpc to pc,it should work.if still not work dezinstall active sync and from control panel uninstall windows mobile-based device disconect pocketpc restart pc install active sync and connect pocketpc,in this way windows reinstall networ driver and now must work ok.
btw I forgot to tel to check at active sync allow usb connection.
good luck.
Thank you very much for everything gabiz_ro.
Ok, I´m going to tell you what I have realized trying to follow your instructions.
Firstable I don´t have that you call:"windows mobile-based device" Or I didn´t find it... I have looked at Lan or Internet connection.
Then, I have tried to find out the conection that you talk abaut that it must be created when I connect my PPC, but I didn´t find it too. I tried to find it conecting the XDA II via USB and via Infrareds (remember that via IRDA does works)
Finally I changed at my PPC what you say abaut remote ndis host, I saved it, and disconnected and connected again, but it didn´t appear anything at taskbar right-down corner of monitor...
I don´t know what to do... And I´m sure that the problem is hosted the new activesync 5.0 or in wm2k5, cause one hour ago, when I came back to w2003se, I synchronized the ppc correctly with the credle via USB...
I´m feeling very weird with it, cause when I put the PPC in the credle (with wm2k5 and actvesync 4.0) the normal sound of the PC when you connect something reconigzed, don´t sounds... what I hear is the double "tun tun" that sounds when you connect something not recognized.
Many thanks
wm2003 is identified by windows as usb device.
but wm2005 like a network connection.
first
right click on "my computer" > properties > hardware > device manager.expand network adapters,and here when conected pocketpc to usb you'll see "windows mobile-based device"
second
local area conection 2 (or other number,in raport with how many network cards are installed on pc) you''l find in start > control panel > network and internet conection > network connection.but appear only when xda is connected if xda is disconected that "local area connection" dissapear too,and xda must be identified and driver installed (windows mobile-based device show without any ! symbol in control panel).infrared connection will not work here.on that local area network who represent connexion between pc and xda right click > properties and mark show icon on notification area.....
if you hear other sound like you say,maybe xda is not identified or windows didn't install corect driver.take a look to see in control panel what is wrong.expand universal serial bus to see if ther is some unknow device or something wrong.
there is control panel print-screen and taskbar area prinscreen.
Ok!
I think that finally thanks to you we have discovered the problem...
I don´t have everything you talk abaut in the device list...
But what I have is this: Generic RNDIS (PROTOTYPE- Remembber to change id Vendor)
It is with the yellow alert icon.
But what could I do to put it right?
thanks
YEEEEEEEEEEES!
Problem FIXED!
That was the problem... It was not recognized, and with alert yellow icon... Thank you very much gabiz_ro, if you´ll didn´t helped me, now I would be changing back to w2003se
Thank you very much again
ok.
glad to can help.
Problem with sync on WM 5.0
Hi, All. Anyone HELP ME pls.
When I finished upgrade my device to WM2005, my Active Sync (4.0) not working, on USB mode.
Only it's working with Bluethooth.
And I saw on PC Device Manager -> Unknown Windows Mobile Device.(Generic RNDIS (PROTOTYPE--Remember to change idVendor)
How can I fix this Problem? :?:
re-install drivers for this device
Pleun,
Hoe installeer je de drivers opnieuw. Volgens mij heb ik die niet
Groetjes
Frenske :lol:
Yes, everything what you need to do, is to click on update drivers, and everything will be fixed
Best Regards
click Update!!!
Windows cannot find this driver...
But I fixed this problem, whereas after than my device is dead. (not working radio, calendar, bluetooth etc...)
Now WM2005 is not good working on XDA II.
try deleting the device, restart pc and have windows find it again.
prototype
Ive got the same problem, where can I get the drivers to fix this???
Thanks Peter
Drivers
IIve got my MDA PRO for afew days now.
I coudnt sync with active sync 4.
I did a rom update and de beta version of active sync 4.2
:lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:
http://t-mobile.iris-global.com/mdas.html
This PDA is like the world in my hand.
Greetings pocket pc freaks
Tricky, huh?
I have an XDAII & a serial cable to connect it to my wifi equipped laptop. I haven't even figured out how to do the most basic networking - but still I'd like to know if it's possible to:
1. Surf on my XDA via my laptop's net connection, connecting with a cable?
2. Use the XDA as a phone to connect to Skype again using cable & laptop wifi?
I'll settle for "It can't be done" but I'd be interested to hear if it might possibly be done.
Cheers!
1 when connected to activesync the xda have pretty much access to the same things as the pc with activesync have
2 yeah i've heard people say they use skype over lan try doing a search
I updated my 8525 with the official AT&T AKU 3.5.2. When I enable Internet Sharing and connect the phone via USB to my Mac, it kills Bluetooth and nothing happens.
With AKU 3.3, this was not an issue. I tried it on a Macbook Pro and a Macbook with the same result. No problem using Bluetooth PAN, but slow.
Just for the fun of it, I tried Internet Sharing with Windows XP running in Parallels, and it works fine via USB cable.
Anyone having the same issue? Any registry hacks or drivers to solve the problem?
Thanks in advance.
Ted
There must be a Mac user here who upgraded t AKU 3.5.
What do you mean by "it kills Bluetooth and nothing happens"?
Does it kill your bluetooth on your mac or on your 8525?
Are you trying to both do internet sharing via USB and connect to your Mac via Bluetooth from your 8525 at the same time?
verendus said:
I updated my 8525 with the official AT&T AKU 3.5.2. When I enable Internet Sharing and connect the phone via USB to my Mac, it kills Bluetooth and nothing happens.
With AKU 3.3, this was not an issue. I tried it on a Macbook Pro and a Macbook with the same result. No problem using Bluetooth PAN, but slow.
Just for the fun of it, I tried Internet Sharing with Windows XP running in Parallels, and it works fine via USB cable.
Anyone having the same issue? Any registry hacks or drivers to solve the problem?
Thanks in advance.
Ted
Click to expand...
Click to collapse
After I enable ICS on my 8525, and connect the USB cable to MAC, somehow, the bluetooth on my MAC gets disabled [Bluetooth Not Avaible message with the icon grey out], and my 8525 still says "check USB cable". But, there's no connection. I made sure that BT is disabled on my phone, and PC to USB is unchecked.
Just as a test, I connected my 8525 to another MAC that doesn't even have Missing Sync and the same thing happened. With ICS on, USB connection basically disables Bluetooth. For the life of me, I cannot figure out why that happens. USB shouldn't interfere with Bluetooth.
In the meantime, it works fine with PC.
Hope someone can shed some insight.
Ted
Any MAC user here willing to help a poor sould?
verendus said:
Any MAC user here willing to help a poor sould?
Click to expand...
Click to collapse
I see the same thing on AKU 3.5 and Tiger 10.4.9 when I just tried it. Once 10.4.9 came out and supported PAN, I stopped using the USB connection. I still get 400kbps or so with Bluetooth, so there's I don't really have a reason to use USB (plus the Hermes drains a MacBook Pro's battery rather fast - I can drain a notebook battery in an hour with the phone plugged in vs. 3 hours without).
Jmat, thanks for the reply. It's good to know that it's not just my phone. I hope this can be fixed though. I do use BT PAN with OS X 10.4.9, but it would be nice to have the USB option since it's about 2x faster.
I cannot understand why USB connection would wipe out Bluetooth on my MAC though.
I know someone here will figure it out.
eh, 10.4.9 supports pan? news to me. i use my pc more than my mac, so i think i only have 10.4.8. i have the latest aku (as far as i know) from the newest cingular rom. i'll give it a shot.
Internet Sharing + OS X
I was able to tether 8525 to powerbook G4 thru bluetooth for internet connection. Then clicking the dropdown for the phone icon and clicking bluetooth. It would dial then authenticate, and I would be connected to the internet. In doing that, I needed to download Tytn modem script for mac modem, it worked great! However, I recently upgraded the ROM (2.06)on the 8525, and now Internet Sharing is the protocol for for Wireless Modem. This method directs the device to connect thru bluetooth by joining the network associated with the Pocket PC, once connected in the bluetooth icon dropdown, I try to access webpages and I get "Not Connected to the Internet."
I've heard of AKU, can someone please refresh my memory, and will it be necessary to update to correct my issue?
Can someone please assist me with using the 8525 to tether with a Powerbook G4 to connect to the internet?
**NOTE** Also, MissingSync for 8525 does not work since the ROM update. I was never successful connecting to it thru BT, but it worked great thru USB. Now I try to connect thru USB , the connection is lost when attempting to start MissingSync app. Any Ideas??
Thank you
-Cletus
Internet Sharing + OSX
I've been using my Hermes to connect to the internet from my powerbook for a few month (BT connection). It was working OK although conflicting with direct push.
Since I upgraded to AKU 3.3 and use internet sharing, it is now much more reliable, connects fast and transparently.
I recently got MissingSync to work, by enabling advanced USB settings thru the phone.
My other issue that is still unresolved is that when I connect the BT PAN from the phone, and join network from the BT setting from the MAC, I connect successfully, but I still can not access internet on MAC. It appears that there are internal settings that need to be altered to access web pages once connected thru BT PAN/Internet share? Any Ideas, please help! Thank you.
obertaud said:
I've been using my Hermes to connect to the internet from my powerbook for a few month (BT connection). It was working OK although conflicting with direct push.
Since I upgraded to AKU 3.3 and use internet sharing, it is now much more reliable, connects fast and transparently.
Click to expand...
Click to collapse
Can you tell me how you set up the connection? I've paired my Hermes and Powerbook, turned internet sharing on, I can join the PAN network but the Powerbook refuses to connect to the internet.
PB PAN
Have you set your network conf to Automatic?