Related
I am on a 3g contract and only use it for phone calls, I do not use the 3g stuff(directley as I know of) Is it possible to transfer my IMEI number to the XDA11 and will it work on the 3G network. I can then use the XDA11 and not have to carry two phones, well more like bricks but good stuff.
IMEI is harcoded into a phone and cant be changed in most cases not to mention it being illegal
if 3's sim were compatible which the newer ones are not you could use it in the xda phone though unless 3 have some odd IMEI locking on their networks
Thank you for your reply rudgear
Thank you for your reply rudgear, If it was possible could it work. Changing IMEI is legal in the uk, but not in some countries.
Re: Thank you for your reply rudgear
m01y1i00 said:
Thank you for your reply rudgear, If it was possible could it work. Changing IMEI is legal in the uk, but not in some countries.
Click to expand...
Click to collapse
YES !!! youre right.... so far I know in Indonesia almost everybody can change imei ...
Hi , I don't konw about the IMEI , but I know that you can use the 3G sim card with 2G phone if the provider use another network for roaming , in this case you will use the roaming one always and you will lose the benfits of 3G.
The only reason I have a 3g phone from three is the cheap calls/conrtact I don't want the 3g stuff, it's to expensive at the moment. I think 3g link up with O2 if there is no signal on thier network. :idea: maybe it,s possible to stay on the O2 network with a 2G phone?
indra 9110
I have read http://wiki.xda-developers.com, this did not help, I bought a serial cable and used that with a full reset and the xda malipulator, that did not work or the xda2unlock.
the xda manipulator only work with walaby xda1 devices and some say only with some radio stacks
as far as i know you cant change the imei it's hardcoded in a chip or something and cant be altered could be wrong though but i've never heard about anybody doing it
Currently I use 3G sim card with 2G phone and it work fine but in roaming mode because the 3G company has contract with another company to serve there customers where is no 3G coverage ... however my brother signed new contract with 3G and they give him sim card but in diffrent color , The new sim card doesn't work in my phone which mean the company changed something in the new sim cards .
note : I have to use manual network in my phone then I chose the other tel co. .
Regards
Hi,
I have been given a sim free HTC Tytn and want to use it with UK Vodafone. I currently have an ex-Orange SPV M2000 which i unlocked and it has been working fine with my Vodafone sim. With my M2000 i can make calls and browse the internet at the same time, but with the new Tytn i cannot do this
Is there a fix, should i upgrade it to the latest version or perhaps try and flash it with the V1605 Vodafone flash??
Advice really appreicated from one of the many knowledgeable people on here please,
Cheers
Here, use the Vodafone UK CAB
http://wiki.xda-developers.com/index.php?pagename=Hermes_provider_cabs
Hi, Thanks for your help so far,
I have installed the HTC UK Settings .CAB file from the helpful post below
http://wiki.xda-developers.com/index.php?pagename=Hermes_provider_cabs
I can now access internet using my Orange contract sim card (which has GPRS activated) although if i am on the telephone i cannot go to browse without ending the telephone call.
my Vodafone contract sim needs updating so is not available for GPRS, but i presume this will be exactly the same.
Is it IMPOSSIBLE to use Internet browsing whilst making a telephone call??
All help appreciated, Many Thanks
For simultaneous voice and data you must be on a 3G/UMTS network with a SIM card supprting 3G. If you are on a GSM network it is not possible.
Ok, so my problem lies solely with the sim cards?
If both Sim cards were upgraded by the Network to 3g sim cards, The UK settings i have installed would allow my sim free Tytn to work as required?
More Info:
I have just spoken to Orange customer services and i do have a 3G sim card and it is active, is there anything i should be altering in the settings menu or anything other files that need to be flashed or installed onto the phone?
Sorry for the lack of knowledge - hope one of you experts can help!
Thank you
Can anyone help me pleasse????
are you in a 3g area? have you tried the sim in a known working phone? have you looked at the wiki or done a search on the forum?
anyone using?
i use Sprint PPC 6800 whit RUIM
Sorry, you are telling that u'r Sprint 6800 is in RUIM mode and has an active RUIM card from chinese network?
If yes, is it possible for you to post some pictures of RUIM slot and face of the plate which covers RUIM slot.
Also where this kind of mobile available?
Thanks for your help.
I cant any space inside the Phone where we can place RUIM card
I think we have to use SIM Cutter to Cut out SmartChip and then Solder it using Wires to Board
rak123456 said:
Sorry, you are telling that u'r Sprint 6800 is in RUIM mode and has an active RUIM card from chinese network?
If yes, is it possible for you to post some pictures of RUIM slot and face of the plate which covers RUIM slot.
Also where this kind of mobile available?
Thanks for your help.
Click to expand...
Click to collapse
No updates on this question?
i also using a R-UIM based Sprint Mugol but recently once i upload the ROM it is not connecting to internet. i update the ROM because i want to use EvDO but now i can not connect to internet..not even 1x service. bit angry....about the new ROM.....my custom ROM which is come along with device (from china) is not support EvDO that's y i looked to install the recent updated ROM which shared by Sprint. after i flashed it and flash sucessfully, 1st i can not call but later once i change If R-UIM available mode to R-UIM only mode i now i can make calls and send txt messages but can not connect to internet.
i am desparately looking for a solution to know how i can conect to EvDO using R-UIM card as my R-UIM card is 64k EvDO R-UIM.
help help
I have been trying to use a dual sim adaptor with Athena but would not boot with it on. Anybody had any success? It will be great for me to be able to use both 3 and standard without removing the sim. it is a pain to remove it on Athena as this is under battery and sometimes needs a flat screwdriver to remove it...
vicinc said:
I have been trying to use a dual sim adaptor with Athena but would not boot with it on. Anybody had any success? It will be great for me to be able to use both 3 and standard without removing the sim. it is a pain to remove it on Athena as this is under battery and sometimes needs a flat screwdriver to remove it...
Click to expand...
Click to collapse
Do you mean dual SIM or dual SD?
Dual sim of course not dual SD
Well, i've got an old DualSIM adaptor (anlog) which worked fine on my Himalaya.
My Athena boots without problems when i use this adaptor, but it takes me 3 or 4 restarts of the phone to get the DualSIM adaptor changin the SIM.
But i guess i have some issues with my SIMCards, they really look screwed up, makes me wonder why they work anyway
Maybe a newer Radio could have an impact on this Issue too.
Right now i use Radio 1.50 and AP Dual PK3.
If your SIMCards are screwed up the Athena won't boot, also my SIMAdaptor needs both SIMCards entered. With only one SIMCard in it, the Athena won't boot.
BTW: SIMDisplay (can be found on sourceforge.net) is the perfect Todayscreen Plugin for Displaying the active SIM.
I have one running but ...
finally I obtained a Simore dual sim working. But my problem is due I have one line for voice and other one for data, if should be possible to have some mechanism that in base to which sim is activated obtaining working the data connection or not. Do you know if it is possible?
Hi Beginner. Could you please post the model info of the Simore dual SIM you found worked with Athena? I'm currently looking for one. Thanks.
beginner said:
finally I obtained a Simore dual sim working. But my problem is due I have one line for voice and other one for data, if should be possible to have some mechanism that in base to which sim is activated obtaining working the data connection or not. Do you know if it is possible?
Click to expand...
Click to collapse
The Connection Setup Wizard will detect the network that you've just switched to and offer to set your data connection to match it. It'll do that every time the network changes.
If you're looking to buy a SIMore dual SIM adapter for the Athena, DON'T. The SIMore dual SIM won't let you connect to WCDMA network so you won't be able to use HSDPA or 3G!!!! I bought one from them and in the process of getting an RMA to return this piece of junk back to them now. Their online ad is fraudulent when they say it's 3G compatible. It is not. It only let you connect to GSM which only offers up to EDGE.
Is there any dual SIM adapter that will let you connect at 3G speeds out there?
PS: If you're only using EDGE at the moment and don't think you will ever never for the rest of your life upgrading to HSDPA, then by all means, flush your money down the toilet and buy this expensive piece of junk.
Thanks for the warning. Thought it was useful to have.
no dual sim
shame there is none yet. it will be great to have a truely dual phone. Networks will hate it
I think it could be posible but not easy to create a soft sim somehow. instead of having to change my three.co.uk hdspa compat sim between Athena (why the hack they do not do the sim reader as a slot accessible without removing battery) and my mac laptop is a nightmare. I tried to use Wifirouter, but it crashes athena quite often.
vicinc said:
I tried to use Wifirouter, but it crashes athena quite often.
Click to expand...
Click to collapse
Under the factory ROM I never had it crash, even with hours of use at one time. I haven't used it under AP4 yet. Maybe you have a conflict with another program?
not installed anything apart tomtom 6 legal
vicinc said:
I think it could be posible but not easy to create a soft sim somehow. instead of having to change my three.co.uk hdspa compat sim between Athena (why the hack they do not do the sim reader as a slot accessible without removing battery) and my mac laptop is a nightmare. I tried to use Wifirouter, but it crashes athena quite often.
Click to expand...
Click to collapse
Iam not sure what are you explaining.
are you using a dual sim system?
does it works? which is it?
thanks.
i tried using few none worked. I find very difficult in swaping sims without the add o a flat screwdriver, also removing battery is not fun.
I am wondering if it will be possible in developing a virtual sim card that will copy the info from our sim card allowing the phone to work with it?
Hi,
Since my HTC universal broke the LCD I start to find a replacement.
I found a friend who have a TG01 with no use... and he borrowed the device before I buy it.
I am running with the device since last Sunday, and I must say that the cons of this device (battery), for me it´s ok (4h30) of use (mix of calls, emails, etc).
I can not reach this time with my HTC
I had found some "problems" but already solved, using search in here.
But, on other side, I have some problems that I could not found the solution.
1. I can not put the device in 3G, only in 2G (I try changing in appropriate settings zones).
If I put in "automatic".... always in 2G and my home area have 3G.
So I decided to leave the device with GSM only.
2. Some cases, when I make/receive a phone call, the others persons inform me that
they can not hear me correctly (like I have poor signal, but the times I could check the
signal, it was full).
3. I use the TG01, with a bluetooh car kit (he did not access the contacts in the phone)
Works fine, but yesterday I found that the TG01 was "frozen" several times in the
day...???
In the evening I found that the freeze are related with bluetooh connections to the car
kit. Connecting/disconnecting.
The 3 problems that I have should be related to radio version???
I have:
software 5005.0000.0171 SP-00
radio version 5005.0000.0171
Thanks
gaiolo said:
1. I can not put the device in 3G, only in 2G (I try changing in appropriate settings zones).
If I put in "automatic".... always in 2G and my home area have 3G.
So I decided to leave the device with GSM only.
2. Some cases, when I make/receive a phone call, the others persons inform me that
they can not hear me correctly (like I have poor signal, but the times I could check the
signal, it was full).
3. I use the TG01, with a bluetooh car kit (he did not access the contacts in the phone)
Works fine, but yesterday I found that the TG01 was "frozen" several times in the
day...???
In the evening I found that the freeze are related with bluetooh connections to the car
kit. Connecting/disconnecting.
The 3 problems that I have should be related to radio version???
I have:
software 5005.0000.0171 SP-00
radio version 5005.0000.0171
Thanks
Click to expand...
Click to collapse
Hi,
Yes your problems are from the radio version and from your carrier nerwork!
I have the same problem in Romania because i have more phones and also 3 carriers.
In one case, I use this phone with the Cosmote carrier from Romania it gave me the same problem as you have (the Cosmote carrier has two networks- one for GSM (2G) and one for 3G). Because the two internal network my phone see that i am in roming and give all that problems!
I installed the Feropont rom ( http://forum.xda-developers.com/showthread.php?t=969087 )and it works ok by now, Mirolg roms (http://forum.xda-developers.com/showthread.php?t=906969)was also ok for me untill a point (is with Sense)!
Another rom I tried is fxdjacentfxd (http://forum.xda-developers.com/showthread.php?t=993343) (best free memory) unfortunatly it gave me an error because of the carrier and i changed.
Rila said:
Hi,
Yes your problems are from the radio version and from your carrier nerwork!
I have the same problem in Romania because i have more phones and also 3 carriers.
In one case, I use this phone with the Cosmote carrier from Romania it gave me the same problem as you have (the Cosmote carrier has two networks- one for GSM (2G) and one for 3G). Because the two internal network my phone see that i am in roming and give all that problems!
I installed the Feropont rom ( http://forum.xda-developers.com/showthread.php?t=969087 )and it works ok by now, Mirolg roms (http://forum.xda-developers.com/showthread.php?t=906969)was also ok for me untill a point (is with Sense)!
Another rom I tried is fxdjacentfxd (http://forum.xda-developers.com/showthread.php?t=993343) (best free memory) unfortunatly it gave me an error because of the carrier and i changed.
Click to expand...
Click to collapse
Thanks very much!!!
for the links.....
I installed feropont rom !!!
Looks fine, but still have the problem of 3G...
Tomorow I will check the sound!!!
Thanks again!!
Perhaps I quit!!!
Hi,
Well, I try radio 1600 and now 300.
In this weekend, 1600 still have bad quality sound (people can not hear me very well).
In this morning (early) I flash again the same rom with radio changed for 300, but still haven´t 3G (for my experience I think I will have sound problem).
Today before flashing I put another SIM card (vodafone) and ... I have 3G, after changing the settings.
I leave the settings in HSPAD, put my TMN sim card ..... and no signal!!! (like usual).
My SIM card what is giving me "problems" had +- 4 months.
(Had 3G in the HTC Universal, with same card).
So, my problems could be in the SIM card (I think not)? what did you say?
After flash and reflash and because I use TG01 for professional use....
Pherhaps I quit!!
Thanks to everyone!!!
gaiolo said:
....
My SIM card what is giving me "problems" had +- 4 months.
(Had 3G in the HTC Universal, with same card).
So, my problems could be in the SIM card (I think not)? what did you say?
Click to expand...
Click to collapse
Yes, my SIM have a problem, he can not log 3G in others phones!
I am waiting news from the operator!
But, with my Wife SIM, the TG still can not connect to 3G
gaiolo said:
Yes, my SIM have a problem, he can not log 3G in others phones!
I am waiting news from the operator!
But, with my Wife SIM, the TG still can not connect to 3G
Click to expand...
Click to collapse
I told you!
The problem consist in the equipment carrier use! Vodafone use Ericsson devices and Orange use Alcatel stuff, but other carrier could use other equipment and from here comes the errors.
I don't think that the error comes from your SIM card !
I think the error come from the radio in your phone witch is not adequate with the carrier equipment. So my advice is keep looking for another radio! Try 1700!
Rila said:
I told you!
The problem consist in the equipment carrier use! Vodafone use Ericsson devices and Orange use Alcatel stuff, but other carrier could use other equipment and from here comes the errors.
I don't think that the error comes from your SIM card !
I think the error come from the radio in your phone witch is not adequate with the carrier equipment. So my advice is keep looking for another radio! Try 1700!
Click to expand...
Click to collapse
Your Right Rila, the problem could also be in the TG01.
But my SIM card, in my wife phone or in another phone with 3G could not "enter" in 3G.
(I did not use 3G in my HTC universal, the sound also wasn´t good, but I always think it was for my blue tooth car kit or bad signal reception)
The same with my old Qtek S200(who don´t have 3G only GSM)
The sim had 4 months old.
For future "helps" I try 1600;300 and now 321.
I am waiting news from the operator.
First I must have a SIM that in other phones, work in 3G, after that, let´s test in TG01
I will post the news
(I must admitted I star to get TG01 addicted )
Perhaps I do not quit!!!
Ok!
In my break launch, I go to a store from my carrier!
They did found one problem, in my "service"!
After 30 minutes they call me and ask to reset the device ( they know it was a Windows mobile phone).
After reset, I select hspda settings and I have now 3G.
I put again the Tg on GSM only ( for saving battery).
In +- 10 calls no one has inform me they can not hear me well.
It´s soon too say that the problem it´s SOLVED but it´s looking good
Another think that I noted is that I have 1H55 m with 70% remaining battery.