I acidently loaded the firmware for I-mate on to my XDA II and now all that comes up on the screen is HTC engineering mobility V0.23. I also can't get it to sink. What should i do?
This is a Demo phone i got for free so i cant send it back.
Thanks for any help
1. I can reassure you that you really did destroy your OS! :lol:
2. Try search at this site, this sort of topic has been being discussed since...
...I don't remember!
3. Have a glance at threads, discussing SD method of OS flashing + you'll need a ROM image file (for any kind of XDA2) and an SD card (>=64Mb).
Loading a new rom with an MMC or SD card
ok i went to www.romkitchen.de and created a rom for pocket pc 2002. So now all i need to do is load it on to my MMC card, put in into my XDA2 and reboot?
Pocket PC 2002 or Windows Mobile 2003 for a XDA2
Should i use Pocket PC 2002 or Windows Mobile 2003 for a XDA2?
Stop!!! The site you are looking at is cooking roms for the old XDA 1, it is not for XDA 2!
TY, i got a copy of some one elses OS, and im going to try to flash it with an SD card.
That didnt work, I dont think im putting it on the SD card right? Do i just copy it to the card or do i need to do somthing to the .nb1 file to make it a boot file?
Also my Bootloader is V0.23 kinda old.
Does any one know of a place i can send this to get it fixed in the US? This is a Demo phone i dont think i can send it back to O2.
Don't give it up yet.
1. XDA2 ROMs are marked 1.xx (1.60, 1.72...) - you need this ones.
2. How do you put it to the SD? You need OSimageTool or maybe other program to put it to the card in RAW format - not converted by active sync or so...
I tried using the OSimageTool to save the .nb1 into the .img but it tells me "don’t know how to write distinationfile". I was able to convert the .nb1 in to a .nbf but that’s it. Is there another conversion program out there?
Sorry i ment "destinationfile" all one word
xdatools are ONLY for xda1
if you want to mess with xda2 flashing
http://wiki.xda-developers.com/wiki/HimalayaRomFlashing
Is there a way to make a boot disk out of an SD card if so how?
Mine is defiantly wiped if I try to run an update to 1.60 using HimaUpgradeUt.exe it show all my image versions as blank. When I hit upgrade it just hangs on the install screen that says "current software is now being erased from your pocket PC. This will take only a few minutes." The progress bar never advances from there, I've tried to reset and it’s the same thing over and over.
Related
I have the T-Mobile ROM 1.60 currently installed on my I-Mate. Now I am trying to install the latest I-Mate update, I keep getting Country ID Error 120. Anyone know a solution? It seems we need some kind of AdaptROM...
The same for me yesterday ERROR 120, I try anyway but no results
I think that new ROM only for I- mate Device with special IMEI Number :evil:
Any ideas? :?:
I upgrade to i-mate update and I try to upgrade to T-Mobile I get the same error!!
anyone can help?
try to hard way...
unzip the ruu15283wwe_cdl.exe file,
you'll find there the *.nbf files.
Use the files to flash with SD card.
I'm not sure if this also works with the XDA II, but try XDATools:
http://www.xda-developers.com/XDAtools/
tomerbn said:
try to hard way...
unzip the ruu15283wwe_cdl.exe file,
you'll find there the *.nbf files.
Use the files to flash with SD card.
I'm not sure if this also works with the XDA II, but try XDATools:
http://www.xda-developers.com/XDAtools/
Click to expand...
Click to collapse
It seems not possible by writing just writing the nbf to SD card and flash to the XDA 2 anymore.
Because the bootloader will check the first 412 bytes (i believe it is the code on the last line of the 412 bytes, somthing like HTCSA00400000XXXXXXXX.............) of the rom on the SD card match with your machine or not. Therefore without any modification, only the ROM dump from the Machine itself can be flashed.
Moreover, nbf is encoded, you can't just edit it by HEX editor, you have to get the rom in nb1 format.
I think XDA developers have to develop new tools to
1. Get the first 412 byte of the rom from your machine in an easier way. Now we have to use Multiport / USB TTY get into bootloader console, dump the rom to SD card , and use ntrw read the SD Raw data to the computer to get this 412 byte. You need a HEX Editor to do so. (Please correct me if I said something wrong).
We can
a) develop an APP to get the 412bytes from SD to harddisk without using a HEX editor
b) directly read this 412 bytes from the XDA2 if possible.
2. A Rom tools that can add your machine's own first 412bytes (or the code) , combine it with a .nb1 or .nbf and write it to a SD card.
By the way , I think a new adoptrom support XDA2 will be the best solution 8)
note added by itsme: this will very likely break your devie!! - better look at sdtool
same problem
i'm having the same problem, installed imate update, now i cant install the t-mobile update.
nobody seems to know how to fix this
HEEEEEEEEEEEEELLLLLLLLPPPPPP
try this
Hi,
another idea... :idea:
try to unzip (using winrar i.e.) the file ruu15283wwe_cdl.exe,
and run the HimaUpgradeUt.exe
It might work!
I got error, the device is not connected, or something like that, while trying to use the original file, but with the HimaUpgradeUt it works!
Tomer
Check this out http://forum.xda-developers.com/viewtopic.php?t=4785
First it was a Phone, then it became a computer phone, now it is camera computer phone... what will be the next?
Click to expand...
Click to collapse
A camera computer phone with a stable, reliable OS? Oh well, we can dream....
Hi, I already read a lot in the forum and the wiki, but as my first try to update my rom went terribly wrong I tend to ask some pros for help
I got me a used XDA1, it worked fine and was a german O2 Model. Then I got the last Update from O2 (3.19) and updated it with success. Then I wanted to unlock it with your Special Edition Rom, downloaded it and tried to apply it just like the O2 one via active sync and progam A. Result was, that my xda got stuck, now I can only see the empty transfer bar on the xda and can´t connect to the xda with active sync anymore. Both resets won´t help to bring the xda back to live the silly bar comes back every time... I can still get into the bootloader, though. As far as I understand I can still get the thing working again with a SD-Card and a rom on it? Can someone pleasepleaseplease tell me which card to buy (I don´t have one jet...) and how to get a onto this card and where I can get this rom? I still have the Files this O2 exe unzipped onto my disk and theres a nice 31MB NK.nbf in the Program/German folder. I already found the description how to flash from a SD-card with the bootloader, I just don´t know where to find the right rom and how to put it on a card... And maybemaybe, could someone tell me the right way to get this O2 xda working with a D1 card without getting it stuck again???
Thanks a lot to all your answers, I really need this thing to work again, and still ask myself how I could try to update the rom without reading enough, seems I will cry into my pillow till it works again cause it´s the only cell I got at the moment
Download xdatools and install, choose the nbf file as source and your card reader/writer as destination, choose this from the drop down menu at the bottom. You will need a 64 meg minimum sd card, a card reader/writer, xdatools and the nbf file. Once xdatools has programmed the sd card you insert into xda, push reset while holding power, when prompted push the action key which is the centre of the 4 way rocker switch. You will find many roms in the the kitchen that is kindly run my lumpistefan. Make sure to choose sd card flashing at base of screen before cooking rom. Here is the link for the rom kitchen.
http://lumpistefan.dyndns.org/
thanks a lot for the fast answer I got all the progs and the original 3.19 german o2 rom from rom kitchen. Now I´ll just have to get me a SD-Card... One more little question. I can´t turn the XDA off with the powerswitch and after reseting it also turns on automatically. I´ll have to wait till Monday to buy a SD-Card, so is there a way to get the thing off although it is still in transfermode or will I have to leave it on and in the cradle?
If you want it switched off completely, just poke once into the hole under the headphone socket, this will completely disconnect the battery, when you want it back on just push once again. Always do that procedure after flashing a rom also, push once then leave for on eminute, push once more to switch back on with new rom and noot sequence.
works fine, thanks
hi ppl,
today I ve made rom with the romkitchen, it was 2003 final and everything went ok, phone was functional until I used to try to install some newer versin of the programs I previously included in the rom. That didnt work (of course) so I decide to put another rom without those programs so I can install newer versions but when I run the romkithen exe computer report
in the dos window
error getconnectiontipe - unspecified error
error getting connectiontype
and the program for the patching report that he is trying to get the data from the device and after that he reports that
"cannot execute the remote communication program, please make sure that the usb/serial cable is properly connectes"
of course cable is connected, device syncing with the active sync and the icon is green, used to try to soft reset pc and pocketpc, to hardware reset pocket pc, to connect it to other pc and patch there, to install active sync 3.7.1, to reinstall active sync 4.2, to reinstall usb drivers on the pc, to put sim card and sd card out and to patch then... nothing helped...
what can I do ? is that due to the windows 2003 instalation on the pocket pc (had same version on other wallaby without the problems) ? can I solve that some way ?
I ve read before that patching can be performed from the SD card so I found the xda tools and osi image tool but couldnt found rom nd1 file anywhere (was stupid and didnt make copy of my previous rom)... which rom can I use just to enable USB connection and after that I ll patch it with the "normal" rom from the rom kitchen...
Ive checked those roms http://wiki.xda-developers.com/index.php?pagename=ROMVersions but didnt find any nd1 file in the files I ve checked, can I use those roms with osi image tool eventually ?
which one ?
Lots of questions ... Sorry people ...
I can use it in this condition too but I d rather have an opportunity to flash it to some other version maybe.
Best regards to the community !
I think it´s just the problem that the ROM prohibits flashing via EXE-file. You have to flash via SD-Card.....
You find the ROm to write on the SD-Card in the EXE-FIle. Just extract the exe using winzip, and then you will find it in a subdirectory (normally english, or dependent on the ROM-Language...)
Stefan
Thanks a lot Stefan, so I can use some ROM from the page http://wiki.xda-developers.com/index.php?pagename=ROMVersions ?
Any advice which one should I take please (Im not using any of the operators noted there, just looking for some rom that will function ok) ?
Thanks m8 !
Yes, you can take any rom of it. Mostly the T-Mobile prohibits flashing via EXE-File, but Flashing via SD-Card is more secure in my opinion. So i´ve done 99,9% of my flashes via SD-Card, and you can believe me, i´ve done it a lot of times.....
By the way, which software has to been updated in my romkitchen?
If you give me the hints, i could try to update them....
Stefan
thanks a lot for your time and advices Stefan !
Its not a huge problem but probably we share same opinion - most of the tech guys like to see that everything work fine, if something doesnt work then we re not satisfied.
Basically problem is that I included spb pocket plus in the rom and therefore I cant install spb weather which demands pocket plus v 2.5+ and version in the rom is 2.0. I cant upgrade it coz its in the ROM, used to try to remove it from the registry but no luck, used to install latest spb diary coz the spb weather also work with the diary but looks like that the first thing weather perform is checking of the pocket plus version and if the version is not 2.5+ it stops the installation...
Probably for the most of the people spb weather is not a reason for loosing couple of hours in trying to change rom in wallaby but as I ve mentioned I like the things that work 100%, if some electronic/computer stuff work at 99% that usually bother me. Stupid - I know but thats the way it is.
Im going to patch it thru the SD, thanks again for the all your efforts now and before.
GL & HF !
Sorry...
Still need help, using the OSI tool I copyed NK.nbf file from 4.02.04_eng rom to "XDA SD Card Slot -unknown size" - coz I dont have card reader/writer at the present moment so I tought that I can put the file via the cradle connection while the card is in the wallaby...
Checked the card from the wallaby file explorer but nothing is on the card, since I had expirience with direct writing to c64 and amiga disks writing I assumed that file could be written directly to the card without OS instructions but after the reset of the wallaby it report that card shoud be formatted to become writable... Is that normal, or I should wait for the card writer reader to put the file properly to the sd card ?
If possible please help me with the link for the OSI tool patching, I cant find it anymore, checked thru the site but no luck, dont know what I have to press so the wallaby read the rom from the sd card.
Thanks Stefan & all others
success !
No help needed, I ve made it...
So dont have any fears as Stefan told unpack the rom from the self extracting archive and run osi tool, in the source field set nbf as a file type and then select extraced rom.
As a target you can set card reader/writer and also you can put the SD card in the wallaby as I did. Set the XDA SD card as a target in that case.
Its normal that after the writing (no message that writing is successfull, when it is finished OSI tool will stop) SD card become unreadable to wallaby.
Then perform actions as noted in SD card patching info
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Hold the power button and soft reset. You'll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
Press action to download and it will start the download/restore from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a " Hard Reset"
Action button mentioned above is middle button - "D PAD"
Works like a charm, now I have o2 win 2002 and later I ll patch it to 2003 SE again but without pocket plus.
Thanks Stefan and community !
hi brothers, i upgraded my O2 XDA Atom last night--result fail. i didn't backup ROM on SD card, so i can't restore by using SD card and i can not find someone to fix it for me in my city. does anyone can upload the full SD Backup ROM for me? it would be great! thank you very much.
You're stuck in the bootloader after an ExtROM Flash Fail, right? Do you have the DSUU windows upgrade executable?
If you don't, download the latest Atom ROM upgrade from the O2 site, connect your device to the PC's USB (you'll see the message on the Atom's screen change to Connected), and run the upgrade (it will think you're trying to flash to an empty device with ROM version 0 - let it). IIRC you do NOT need to use an SD card ROM for this process.
To ensure success, be sure you have removed the SIM card from your device first - and it usually takes one or two tries before the extrom format command goes through successfully (*glares at Quanta*). As long as what failed is only your ExtRom you should be able to salvage your device.
Thanks brother, i will try it.
Hi, I will describe your problem in a new topic, because I see that it is broader.
Well, on Friday I bought a HTC HD2 wgranym WM 7 Unfortunately, this system will not even suitable to use, so I decided to upload, and in fact you go back to WM 6.5. I found the forum two ways by dropping LEOIMG.nbh file directly to memory card and a second by installing ROM when connected to a PC.
I bought a memory card reader and format the card. I threw the downloaded file from here: Multiupload.com - upload your files to multiple file hosting sites! Do not give it any more with this phone .... Charter installed a phone and pressing the handset, which is used to activate the phone and the VOL DOWN I switched to a mode. First there was a color screen with the specified data to HD2, but then came the white screen that says "loading ..." and nothing happened for an hour. Perhaps this file does not match my HD2, or he do not know.
The second method seemed to me an alternative and downloaded from the official HTC ROM, giving the serial number. Was surprised that it was a ROM for Norway. I do not know well past the phone, so I do not exclude the possibility that the phone is from Norway. I downloaded the ROM, I downloaded the ActiveSync. But I do not know why when you plug the phone activesync can not connect with them. He writes the message "The device was not detected. " I wanted to try and install without ActiveSync, but the installation failed.
I have no strength, like I'm doing everything ok, but I can not fix this for anything WM 7
Sorry for language errors, I used google translate to translate.
Any help thanks in advance.
okay first of all, if your using windows 7 then you dont need activesync. You need "Windows Media Device Centre"
Also, try turning on the phone whilst holding the volume down button. That should take you to bootloader. (3 colour screen).
You should see the word "serial" at the bottom of the screen.
Connect via USB and wait for the drivers to install.
The word "Serial" should then change to "USB".
Then you can flash a ROM via USB. If your phone is network branded then you will need to flash the correct ROM from the HTC site.
czarinio said:
Hi, I will describe your problem in a new topic, because I see that it is broader.
Well, on Friday I bought a HTC HD2 wgranym WM 7 Unfortunately, this system will not even suitable to use, so I decided to upload, and in fact you go back to WM 6.5. I found the forum two ways by dropping LEOIMG.nbh file directly to memory card and a second by installing ROM when connected to a PC.
I bought a memory card reader and format the card. I threw the downloaded file from here: Multiupload.com - upload your files to multiple file hosting sites! Do not give it any more with this phone .... Charter installed a phone and pressing the handset, which is used to activate the phone and the VOL DOWN I switched to a mode. First there was a color screen with the specified data to HD2, but then came the white screen that says "loading ..." and nothing happened for an hour. Perhaps this file does not match my HD2, or he do not know.
The second method seemed to me an alternative and downloaded from the official HTC ROM, giving the serial number. Was surprised that it was a ROM for Norway. I do not know well past the phone, so I do not exclude the possibility that the phone is from Norway. I downloaded the ROM, I downloaded the ActiveSync. But I do not know why when you plug the phone activesync can not connect with them. He writes the message "The device was not detected. " I wanted to try and install without ActiveSync, but the installation failed.
I have no strength, like I'm doing everything ok, but I can not fix this for anything WM 7
Sorry for language errors, I used google translate to translate.
Any help thanks in advance.
Click to expand...
Click to collapse
You need to take that official ROM, rename it from .exe to .zip, and extract the LEOIMG.nbh file. Place this file in the root directory of your SD card and then go into bootloader like before. This will flash the stock ROM onto your device. Make sure the SD card is fairly low capacity, 2 or 4 GB seems to work best, and formatted for fat32.
Good luck!
czarinio said:
Hi, I will describe your problem in a new topic, because I see that it is broader.
Well, on Friday I bought a HTC HD2 wgranym WM 7 Unfortunately, this system will not even suitable to use, so I decided to upload, and in fact you go back to WM 6.5. I found the forum two ways by dropping LEOIMG.nbh file directly to memory card and a second by installing ROM when connected to a PC.
I bought a memory card reader and format the card. I threw the downloaded file from here: Multiupload.com - upload your files to multiple file hosting sites! Do not give it any more with this phone .... Charter installed a phone and pressing the handset, which is used to activate the phone and the VOL DOWN I switched to a mode. First there was a color screen with the specified data to HD2, but then came the white screen that says "loading ..." and nothing happened for an hour. Perhaps this file does not match my HD2, or he do not know.
The second method seemed to me an alternative and downloaded from the official HTC ROM, giving the serial number. Was surprised that it was a ROM for Norway. I do not know well past the phone, so I do not exclude the possibility that the phone is from Norway. I downloaded the ROM, I downloaded the ActiveSync. But I do not know why when you plug the phone activesync can not connect with them. He writes the message "The device was not detected. " I wanted to try and install without ActiveSync, but the installation failed.
I have no strength, like I'm doing everything ok, but I can not fix this for anything WM 7
Sorry for language errors, I used google translate to translate.
Any help thanks in advance.
Click to expand...
Click to collapse
The easiest way to reflash is using SD Card method.
If you dont have HSPL installed, you should only use this SD Card method to flash the Correct Stock ROM.
Download your correct stock ROM (you must be sure about this, in order to avoid failure). Ectract the downloaded correct stock ROM using 7zip or Winrar. Find the file named: RUU_signed.nbh and rename it to : leoimg.nbh. Place/copy that file to the root directory of your micro sd card (using card reader). For better result, before doing that, you may format your sd card to FAT 32, and copy only that file for flashing purposes only.
Now, put your sd card back to the phone. Go into bootloader mode (by pressing volume down and power on buttons at the same time). Follow the onscreen instruction. Dont forget, to charge your batter before flashing.
goodluck
Thank you all for your responses. I still have one request to you. The set did not get the CD with drivers for HD2. Has anyone can link to them? Thank you in advance.
czarinio said:
Thank you all for your responses. I still have one request to you. The set did not get the CD with drivers for HD2. Has anyone can link to them? Thank you in advance.
Click to expand...
Click to collapse
The Windows Mobile Devive Center has the drivers for the HD2 in it. So when you download the program and install it to your computer you have the drivers. Go to microsoft.com/getstarted to get the WMDC program.