I'm thinking of upgrading from XDA I to II, has anybody else who has upgraded come across anythings that was worse on the XDA II than on the XDA I, for example battery life and using the screen outdoors? Also I find PocketPC 2002 very buggy and the phone is unreliable - have these issues been resolved in XDA II/PocketPC 2003?
some people have this issue
http://forum.xda-developers.com/viewtopic.php?t=10088
some people feel that the screen dont like like it's 65k colouer screen
http://forum.xda-developers.com/vie...postorder=asc&highlight=color+colour&start=50
some people dont like the bluetooth stack from ms which xda2 use
which are a bit limited in just about every way you can think of
http://forum.xda-developers.com/viewtopic.php?t=9618&highlight=bluetooth
Wow, wasn't aware of so many potential problems on the XDA 2... I didn't notice any problems with the color while playing with a demo unit. Next time I do get my hands on one I'll scan it more carefully.
I too am using a XDA I, but I do not plan on pouncing on the XDA 2 because there are a few new units on the horizon.. most notably the HP 6300 and MDA III.
well it's not like the colour is worse then xda1 just that some people dont think it's true 16bit colour
Everything is fine with my unit; I just don't like the MS Bluetooth Stack, doesn't let you listen to music through your Bluetooth Headset
WeatherB said:
Everything is fine with my unit; I just don't like the MS Bluetooth Stack, doesn't let you listen to music through your Bluetooth Headset
Click to expand...
Click to collapse
Will the MDA3 have this fixed?
i think when no other info is given about bluetooth stacks
then they are using the free and not all that great ms stack
Rudegar said:
i think when no other info is given about bluetooth stacks
then they are using the free and not all that great ms stack
Click to expand...
Click to collapse
Thats too bad... I may actually consider the HP63xx if this turns out to be the case...
markh said:
I'm thinking of upgrading from XDA I to II, has anybody else who has upgraded come across anythings that was worse on the XDA II than on the XDA I, for example battery life and using the screen outdoors? Also I find PocketPC 2002 very buggy and the phone is unreliable - have these issues been resolved in XDA II/PocketPC 2003?
Click to expand...
Click to collapse
I use XDA1 with WM2003 with no problems. I never use the 2002. What problems are present?
- If you lose reception it will sometimes not automatically reconnect to the network
- If you lose a GPRS connection you have to do a soft-reset to connect again
- Sometimes it won't do a GPRS connection - again a soft reset. Sometimes when it does connect can't download any information
- SPB Full Screen Keyboard sometimes doesn't work because of some fault in the OS. One has to take out the SD card and do a soft reset but when you do that you can't access the SD card
- When you put in a new SD card it won't recognise it - one has to do a soft reset.
- Sometimes the device will do a soft reset on its own, though I think that is down to a lose SIM card.
- If you have the SMS client open while in standby mode you won't get any audio alerts for incoming SMSs
- On some days I get double alarms on one alaram
- One seems to have to do a soft reset before uninstalling programs, if you don't, it tries to uninstall it but you get a busy icon forever
Some of the above are probably hardware problems though some are OS bugs. I wish the device would be a bit more reliable
do you have an xda2 ?
because your profile says xda1 ?
I use my Wallaby about 5-6 moths. (Yes I have an XDA1)
- If you lose reception it will sometimes not automatically reconnect to the network
This happends for me once. But I think the whole OS freeze, maybe from other problem, or program. I lose the network twice a day, because I travel with underground. But no problem to loging on.
- If you lose a GPRS connection you have to do a soft-reset to connect again
Oh yes, this is a roblem. I try GPRS when I bought my device, use internet for one month, and yes, it happends often for me too.
- Sometimes it won't do a GPRS connection - again a soft reset. Sometimes when it does connect can't download any information
Yes, yes. Now, I remember that problem.
- SPB Full Screen Keyboard sometimes doesn't work because of some fault in the OS. One has to take out the SD card and do a soft reset but when you do that you can't access the SD card
I don't use this program
- When you put in a new SD card it won't recognise it - one has to do a soft reset.
I used SD card rarely. Only 5-6 times, when I borrowing one from my friend. But I had no errors like this.
- Sometimes the device will do a soft reset on its own, though I think that is down to a lose SIM card.
Never happend to me
- If you have the SMS client open while in standby mode you won't get any audio alerts for incoming SMSs
Hmm. It mean, when inbox was open? I never tested it.
On some days I get double alarms on one alaram
Only happend for me, when load back a backup, and there was double everithing (contats, appointments....) when I synced with outlook. I think I make something wrong.
- One seems to have to do a soft reset before uninstalling programs, if you don't, it tries to uninstall it but you get a busy icon forever
It is a software failure I think. maybe for the wrong programmed softwares, and the OS.
I hate one thing with this MS phone:
I use startup password. When I receive a call, I can pick up the phone, without enter the password, but can't change the volume. :evil: I hate this bug well.
I think the XDA 1 is the best value phone/pda on the market today and the xda developers have made it even better value with their flashing software and bespoke roms. I use one as a phone, navigation system, book reader, mp3 player, internet explorer, pop3 email downloader, games, and much more, there is nothing that comes near to the functionality for the price. I have bought several used 64meg devices for friends and they are all amazed at the value for money, when coupled with gps and tomtom its still cheap but packed with features and options.
I have an XDA1 my only 2 problems are that it does not have a SDIO socket & Bluetooth, and as Cruisin thru said the developers here enhanced the device to be the best working PDA PHONE in the market they could just do that to the Himalaya's as well since it has all the missing features in the Wallaby but it need a lot of hard work.
Related
1. A2DP icon missing
I want to re-direct skype audio to my bluetooth earphone. How can I do that?
2. I can not login MSN/windows alive though skype can login without any problem via WIFI. Seems MSN try to get online through different connection setting? how/where can I define the connection setting for MSN?
3. Phone module die without any sign. All incoming call is diverted to voice mail automatically until soft reset. As if the phone is switched off.
(I am not sure whether this is WM6 related)
this means you might miss important call without any sign!
Does anybody have same experience?
1) I dont think that was ever a default thing? Did you install something and forget? have a cooked rom? There are A2DP solutions in this forum, "Use the Search luke."
2) No, its shagged. I installed the windowslive50.cab file I had on universal, it works now.
3) No idea, mine works fine. Hard reset? Check your sim?
I can get online with my WLM but it does sometimes take a resync of the whole account to do it.
Skype did say (unless changed recently) that they were still working on transferring calls to bt headsets. Which means, currently, that it does not work through anything other than headphones and the mic on the phone.
Comm Manager
Hello,
It is possible to change the green color from the Comm Manager ?
Thanks
French Keyboard
I have upgraded my french Advantage and all is OK apart for keyboard layout. On my old Universal (also french keyboard) I had changes the registry for hklm/software/oem/qwerty layout to 1040C (hex) and it had worked.
On the advantage this does not seem to change anything, any ideas?
Also has anyone got integrated VoIP working? I have used a CAB file from Universal to activate it and SIP Config Tool to do the set up but it does not allow me to select VoIP from today menu.
Anyone got this set up and working? Integrated VoIP is the reason I upgraded to WM6!
Messenger Etc....
Live Messenger stops working correctly after a soft reset. Initially it works fine. Contacts show as offline, although they are still able to contact me and vice-versa.
As far as I can ascertain push email still functions correctly.
I cannot confirm whether this is related to MS's side (rather than the program) as I haven't had chance to check if anyone else experiences the same problems.
Have tried installing the separate CAB file but I am subsequently told that I do not have the necessary permissions (or something like that).
This comes from tests on a T-Mobile branded Ameo (not the brand new one I'm selling, if anyone decides to cross-check!)
I haven't come across any other problems. Seems a bit less laggy than the original T-Mobile ROM, loads up web pages slightly faster too it seems.
No other issues as yet.
Ive had no probs at all since installing the messenger cab.
Still using it now.
Do we know what version of WLM is on this new ROM?
I've pulled \windows\wlmmessenger.exe to desktop and looked at the Version tab...10.6.28.2700 is what comes out.
Pyrofer - can you do the same on your cabbed version and let me know what the version number says? Not always an accurate guide but worth a shot. Also the digital signature is 3rd May 07.
Cheers
Ant
EDIT - never mind, just seen ur post in general Athena tab...10.6.0026.1400
I wonder what is different? If anything? I also wonder whether this is actually a final release of the ROM that's just been leaked early, as WLM is a pretty central component to web using Athena owners (myself very much included) and for it not to work after a soft reset...hmm.
Hi royalmail,
I've got exactly the same problem you mention about the phone.
I was unable to answer calls.
So I belive you've use the second file to upgrade to WM6 (HTC001 ... with ipl...).
You have to go back to WM5 WWE using the last ROM posted in the Athena upload folder in the XDA FTP. After flashing your Athena to WM5, Use the first ROM posted (the one with a readme file included).
And voila! No problem at all since I've done it this morning, everything works fine!
Hope this helps!
Hi Thibale,
I flashed with the t-mobile version. the phone dead only once so far, though i am not sure it's caused by WM6. Anyway, thx for sharing your info.
royalmail said:
1. A2DP icon missing
I want to re-direct skype audio to my bluetooth earphone. How can I do that?
2. I can not login MSN/windows alive though skype can login without any problem via WIFI. Seems MSN try to get online through different connection setting? how/where can I define the connection setting for MSN?
3. Phone module die without any sign. All incoming call is diverted to voice mail automatically until soft reset. As if the phone is switched off.
(I am not sure whether this is WM6 related)
this means you might miss important call without any sign!
Does anybody have same experience?
Click to expand...
Click to collapse
See if this helps
http://www.silentservices.de/btIO.html
Also, read through the forum regarding some of your other issues.
Try to disable your GPRS and see if your calls start coming through.
Pyrofer said:
Ive had no probs at all since installing the messenger cab.
Still using it now.
Click to expand...
Click to collapse
Thanks for all the input.
@Pyrofer, could u upload yr WLM5.cab here? thanks in advance.
Has anyone seen or uses a similar application to jetware mobile to enhance the bluetooth on your PDA??
I use BatteryStatus, It can place a (bluetooth, wifi) shortcut on today....
Have a look also to Ilauncher....
With that you can have what ever icon you want on your today....
So bluetooth, wifi, shortcuts to other program ecc.....
You can also edit the icon with your own...
That is a very nice app...
Thanks for the reply but what I am actually looking for is similar to jetware which adds extra profiles to the bluetooth stack not icons, it helps with devices or bluetooth car kits that can read sms etc
Battery status does not actually add anything or extend the bluetooth stack.
I wonder if we can contact the author of the jetware extension to release the source code. He's obviously not doing anything with it anymore.
Top! UP! UP!
Yep UP! i'm also looking for a way of extending the BT stacks functionallity without having to replace the stack itself. Perhaps we really should try to contact the author of jetware
No other app in this world to function like Jetware extension?
Woody_XDA said:
Has anyone seen or uses a similar application to jetware mobile to enhance the bluetooth on your PDA??
Click to expand...
Click to collapse
may i ask why are you looking for a similar one and not use this one?
i am asking 'cose i found myself long time ago that is causing some problems
with the BT communication....do you have the same problems?
In my case there are some minor problems with BT connection and it also does not deliver entire functionallity that i require - like PBAP and other stuff
Same here. It's not finished and the developer just kinda dissapeared two years ago. Sooo we're looking for someone to take over. Someone please take over on this! There could be a lot of money involved. I would pay up to $100 to get this done!
I'm on the case
Also, what is PBAP?
Ok I think I've found everything I need to get started on this. Since I don't have a device to test this with, I need to know what feature you think would be easiest to implement or what feature you want the most. ie: List contacts, list messages, etc.
This way, I can focus on implementing this one thing, and once it's working i'll know i'm on the right track and can move on from there.
maybe "Pocket Bluetooth Tools" is what u'r looking 4 ?
ink0gnito said:
maybe "Pocket Bluetooth Tools" is what u'r looking 4 ?
Click to expand...
Click to collapse
i'm gonna go try this on my pioneer bluetooth
*update* pocket bluetooth works perfect with my pioneer in-car bt unit.
HI guys
Just wondering does Jetware 1.31 work well enough with car kits? I tried my Polaris with the Alpine KCE-350BT and it doesn't work so am about to test it using Jetware. Just wanted to know do you need to run Jetware each time or just for the initial phone book upload? Once the contacts are uploaded i think it should work properly without running Jetware correct?
Just can't really place anything on the today screen or a shortcut, so interested to hear if there is anything else better.
thanks,
ink0gnito said:
maybe "Pocket Bluetooth Tools" is what u'r looking 4 ?
Click to expand...
Click to collapse
this didn't seem to work on my HTC TC.
Anyone else close to a working alternative? I really need something to replace OBEX and use the PBAP format to upload contacts to Alpine car kit.
Are there any registry fixes or does WM6.1 get around the problem as claimed by MS.
Cheers,
I can report that theJetware 1.31 works perfectly on my Orbit II with Parrot 3200LS car kit (use the Disable Synchro phone profile and then send contacts via Jetware).
KeithXP said:
I can report that theJetware 1.31 works perfectly on my Orbit II with Parrot 3200LS car kit (use the Disable Synchro phone profile and then send contacts via Jetware).
Click to expand...
Click to collapse
How do you go about disabling synchro phone profile - is it the same with touch cruise?
I never really 'got' Jetware. Do you just need to send contacts once to the car kit? Also i assume you are meant to toggle bluetooth on/off using the Jetware shortcuts, not the normal bluetooth??
Thanks- i'm going to go bakc to the shop and test it now i've got a 6.1 Rom on, as the OBEX was a problem so perhaps with this turned off in adv. config. it may work (fingers crossed).
When you go to pair the phone on the Parrot, you should see 'Disable Synchro' in the list of phone types available. Select this and then proceed with pairing. Once paired, you can go into the Jetware extension (Contacts area) and Send all your contacts. The huge plus is that if you use automatic synch, you will get duplicate entries for every phone number held for a given contact. If you use the Jetware Extension to send contacts, you get one entry per contact, with all the numbers correctly identified as mobile, home, work.
Then when you dial, you say the contact name, then 'home' or 'work' etc. If you use voice dialling this is essential, otherwise you have to record every number individually (voice tag "John Doe home", "John Doe work" instead of one tag "John", then "mobile" or "home" when prompted for number type).
I hope that makes sense, but since your message is two weeks old (sorry, haven't been here for a while) you may have it figured out.
AFter all that, it seems the developers at Jetware have given up. They don't respond to email and the link to purchase the software is broken/dead. That's a bummer as I have lost my activation code and just got a new phone....
KeithXP said:
When you go to pair the phone on the Parrot, you should see 'Disable Synchro' in the list of phone types available. Select this and then proceed with pairing. Once paired, you can go into the Jetware extension (Contacts area) and Send all your contacts.
Click to expand...
Click to collapse
Thanks for the reply - I have never seen this option of 'disable synchro' anywhere on the phone, jetware options or on the car kit interface.
It seems to be working well enough now, but the phone book did get corrupted and couldn't fix it till i paired another phone then mine again. (contacts were mixed up - some first name last name, and didn't show /H or /M for home or mobile etc but seem ok now).
Part of it could be having to be patient with the Alpine BT kit, as it takes a while 'updating' on pairing to copy all the info again. Still doesn't work as fast or as reliably as i'd hoped, but probably good enough. May not have this phone forever, but don't want to get another one yet.
It's a shame they aren't supporting their product any more. Hopefully someone else could improve it or write something better, as the one annoying thing now is that i can't put the phone into sleep mode when i press the button - keeps powering back on to full lit screen, every few mins which wastes the battery as well as distracting when the phone is in the car mount- now i just have to lock the device as a workaround.
Hi Guys,
I'm also a proud owner of the HTC HD2, but I've got 2 problems with it.
The first:
I use the BlueTooth connectivity to connect to my hands-free set (In car hands free set on the Alfa MiTo which is also Windows Mobile powered). Now here's the problem. Situation:
I go to work, turn on my BlueTooth, get in the car and it connects fine. When I'm at work I turn BlueTooth off (to save battery power). At the end of the day, when I'm going back home, I perform the exact same routine, but this time when I'm trying to enable BlueTooth the HD2 crashes. It freezes all together. Only the hardware buttons continue to work, except, the long-hold on the ON/OFF-button to turn off the device doesn't work. Now I think you all agree that this is pretty anoying, cause I have to remove the battery to reset the HD2.
Second:
I use my HD2 as my wakeup alarm in the morning. Because I'm a deep sleeper I set 2 alarms on the device, just to make sure ;-) Often I'm awake on the first alarm and I switch the second one Off using the sense interface and pressing the 'On - Off' slider in the Alarms menu. Guess what? The second alarm still rings at the time it was orginally set!
Does anyone recognise these problems and/or do you have any advise on how to solve these problems?
[Device specs]
Radio Rom: 2.04.50.22_2
ROM: 1.43.404.1 (70124) NLD (26 october 2009)
Manila: 2.5.19202525.0
I'm having the same problem with the alarm, don't know a solution but im looking for a free alternative app.
I am having a problem with the alarm as well. Also my alarm is now gives the alarm of an calender appointment. I tried changing the sound in both the HTC sense and windows mobile configuration screen. The configuration goes well but when testing, it still only gives the appoinment sound (2 pings). Has anyone encountered this mismatch issue and know how solve it?
I have the problem to turn on the bluetooth also. After I click the button to on the bluetooth, the bluetooth bar dimmed and hang up the hold Comm Manager. A few minutes later, it said "can't turn on bluetooth". It doesn't happen when I turn on the bluetooth right after I switch on my HD2.
hkwylai said:
I have the problem to turn on the bluetooth also. After I click the button to on the bluetooth, the bluetooth bar dimmed and hang up the hold Comm Manager. A few minutes later, it said "can't turn on bluetooth". It doesn't happen when I turn on the bluetooth right after I switch on my HD2.
Click to expand...
Click to collapse
I have the exact same problem.
other problems with bluetooth
My Elf, Hermes all work fine with my Cars built in hands free (BMW6 Series) however the new HD2 connects fine...but the audio quality is crap to the point of having to use the headset shipped with the device.
Other problems....VOLUME CONTROL...or the lack of it. HAd to reset my phone just to be able to use the side switch within HTC music player and on speaker phone...can't turn the volume down.
same for me
having the same bluetooth problems, comm manager hangs when trying to re-enable bt. find the alarm pretty naff. need to get a proper alarm program, any suggestions?
Same BT issues here, plus phone drops calls when connected to car's built-in BT. Also unable to use phone as a modem using BT connection to my laptop - but works fine when connected via usb cable.
Alarm selected sound also not playing, but getting just the 2 pings no matter what sound I choose. Hope HTC is aware of these problems and addressing them with Rom update soon.
[having the same bluetooth problems, comm manager hangs when trying to re-enable bt. find the alarm pretty naff. need to get a proper alarm program, any suggestions?]
G-Alarm is a very nice program. Only downside is, you must buy it.
I mailed HTC, but those ******* at HTC support center just give you a basic nonsence answer. The BT issue is a problem of my car and not the phone (according to them). The alarm-issue they don't reply on.
However I did found a workaround for the BT-re-enable issue. Turn of the BT, then wait for about 5 seconds before you re-enable the BT. This should work. I think the problem is, that the slider is already at the "off" point, but in fact the the connections with BT are still being terminated.
The rest of the issue with BT I gave up. I reported a complaint to HTC, but not much change I ever here anything of that. Just wait until they finally bring out that 1.61 rom en hope they fixed the BT-problems in that radio rom.
Hope this can help. I got my BT working again
If you have installed TOMTOM it can be the problem. Found this in another forum:
TOMTOM places a new BT dlls under the windows folder that I had to remove:
\Windows\BtSdkCE30.dll
\Windows\BtCoreIf.dll
You can either ename them or remove them and then soft restart your Touch Pro 2/HD2 and everything will go back to normal.
MrWortel said:
G-Alarm is a very nice program. Only downside is, you must buy it.
Click to expand...
Click to collapse
There's an old version of G-Alarm that is free. The last free version is 1.5.1 and I got mine in one of these PPC freewares sites. Anyway, I use this application so much that I think I'll buy it.
bluetooth
hkwylai said:
I have the problem to turn on the bluetooth also. After I click the button to on the bluetooth, the bluetooth bar dimmed and hang up the hold Comm Manager. A few minutes later, it said "can't turn on bluetooth". It doesn't happen when I turn on the bluetooth right after I switch on my HD2.
Click to expand...
Click to collapse
me to (((
please help
Same BT problem here, the two TomTom files rename done.
Bluetooth hang
MrWortel said:
....
I go to work, turn on my BlueTooth, get in the car and it connects fine. When I'm at work I turn BlueTooth off (to save battery power). At the end of the day, when I'm going back home, I perform the exact same routine, but this time when I'm trying to enable BlueTooth the HD2 crashes. It freezes all together. Only the hardware buttons continue to work, except, the long-hold on the ON/OFF-button to turn off the device doesn't work. Now I think you all agree that this is pretty anoying, cause I have to remove the battery to reset the HD2.
Click to expand...
Click to collapse
Same problem 4 me...very anoying......and no TOMTOM installed!!!!!
ROM 1.48.408.1 (ITA) 71294
RADIO VERS 2.05.51.05_2
MANILA 2.5.19211619.0
SAman1 said:
Same BT issues here, plus phone drops calls when connected to car's built-in BT. Also unable to use phone as a modem using BT connection to my laptop - but works fine when connected via usb cable.
Alarm selected sound also not playing, but getting just the 2 pings no matter what sound I choose. Hope HTC is aware of these problems and addressing them with Rom update soon.
Click to expand...
Click to collapse
Idd I have the same problems, well that bluetooth 'crashes' and after a few min I get the message can't turn on bluetooth. I will report this to HTC (website), plz all of you, do the same, hopefully then can write an update for this!
MrWortel said:
[having the same bluetooth problems, comm manager hangs when trying to re-enable bt. find the alarm pretty naff. need to get a proper alarm program, any suggestions?]
G-Alarm is a very nice program. Only downside is, you must buy it.
Click to expand...
Click to collapse
It's very nice and worth to buy it imo, it works for me. You can try it out for free and then purchase it if you like it. It's 5 Euro, so it aint that expensive!
steve87 said:
Hope this can help. I got my BT working again
If you have installed TOMTOM it can be the problem. Found this in another forum:
TOMTOM places a new BT dlls under the windows folder that I had to remove:
\Windows\BtSdkCE30.dll
\Windows\BtCoreIf.dll
You can either ename them or remove them and then soft restart your Touch Pro 2/HD2 and everything will go back to normal.
Click to expand...
Click to collapse
Those are protected files, how can I delete those!?
XTREEM|RAGE said:
Idd I have the same problems, well that bluetooth 'crashes' and after a few min I get the message can't turn on bluetooth. I will report this to HTC (website), plz all of you, do the same, hopefully then can write an update for this!
Click to expand...
Click to collapse
Please could you send me the link to HTC so i can contribute to place the report.
Papagno said:
Please could you send me the link to HTC so i can contribute to place the report.
Click to expand...
Click to collapse
http://www.htc.com/uk/CS_Mail.aspx
or
http://www.htc.com/uk/about_htc_bymail.aspx
Hey guys, I upgraded to the Atrix from my Tilt2... I set up the bluetooth with my car (Audi A5) and the calling works fine but the car no loner imports my SIM contacts, recent calls, missed calls, and dialed calls list that my Tilt2 used to send over. Those options on the car are now just blank. Is there anyway to enable this? The bluetooth profile on both phones is just listed as "hands free". Is there any way to fix this or enable other connection profiles to send that data like my last phone did?
Thanks guys
I can pair my Atrix is my BMW 3-series but when it tries to download the phone book the BT connection drops. Sometimes I can start to make a call but it will drop the connection.
I can connect all my BB's and my HTC Inspire 4G just fine.
I think there is something wrong with the BT stack.
Ziuck said:
I can pair my Atrix is my BMW 3-series but when it tries to download the phone book the BT connection drops. Sometimes I can start to make a call but it will drop the connection.
I can connect all my BB's and my HTC Inspire 4G just fine.
I think there is something wrong with the BT stack.
Click to expand...
Click to collapse
I think you may be right... I did some more online searching after the post and stumbled upon an Audi forum where multiple people have lost the ability on several different car models after moving to a stock android device... however, it appears things fix themselves with CM roms which may have a more sophisticated BT stack. I wonder if it's hopeless about having that capability until 2.3 or the bootloader is cracked?
If I can't get this fixed soon then I will be forced to return this phone.
How can they screw up something so simple??
UTZorro said:
Hey guys, I upgraded to the Atrix from my Tilt2... I set up the bluetooth with my car (Audi A5) and the calling works fine but the car no loner imports my SIM contacts, recent calls, missed calls, and dialed calls list that my Tilt2 used to send over. Those options on the car are now just blank. Is there anyway to enable this? The bluetooth profile on both phones is just listed as "hands free". Is there any way to fix this or enable other connection profiles to send that data like my last phone did?
Thanks guys
Click to expand...
Click to collapse
I have this same problem in my Chevy Volt. Sometimes the phonebook works (but very slowly) but the call lists never work. Also seems to take a very long time to pair initially.
Sent from my MB860 using XDA App
A lot of cars can only import the phone book from the SIM card. Not from any other application on the phone.
So if your phone book is in Google Contacts or some other application...you'll need to port it into the SIM card itself for most cars to be able to read it.
Return it. I have new A4 and atrix pairs fine. I actually think its the clearest device I've used in my car yet
Sent from my MB860 using XDA App
fade?
"I have new A4 and atrix pairs fine."
And do you know WHICH phone book your numbers are in, or which phone books the A4 can pair with?
If his BT is connecting, and the phone is working over BT, there's no reason to think the phone is defective. yet.
UTZorro said:
I think you may be right... I did some more online searching after the post and stumbled upon an Audi forum where multiple people have lost the ability on several different car models after moving to a stock android device... however, it appears things fix themselves with CM roms which may have a more sophisticated BT stack. I wonder if it's hopeless about having that capability until 2.3 or the bootloader is cracked?
Click to expand...
Click to collapse
It's not a BT Stack problem...it's an Audi problem (or BMW, etc...). The manufacturers need to program their devices for Android. The ability to grab contacts and such isn't a standard bluetooth handsfree device option. It has to do something extra. How it *handles* that extra something differs by device...which is why some don't work with Android devices.
On top of that, there's a dialogue when you first pair the device that asks if it should have access to your contacts, call lists, etc...that you have to "Allow" or it won't ever be able to get those lists. It's been the same way on every Android phone I've ever used. If you don't hit Allow within 10 seconds the dialogue will go away and never come back...unless you unpair and re-pair the device. Try doing this and seeing if the dialogue comes up. If it doesn't, it's an issue with the way your Audi/BMW polls for contacts.
BTW works perfectly with my Kenwood receiver.
Ziuck said:
If I can't get this fixed soon then I will be forced to return this phone.
How can they screw up something so simple??
Click to expand...
Click to collapse
"They" didn't. Audi/BMW did. They didn't spend enough time programming to figure out that Android handles contacts slightly differently. Put blame where it's due.
hotleadsingerguy said:
"They" didn't. Audi/BMW did. They didn't spend enough time programming to figure out that Android handles contacts slightly differently. Put blame where it's due.
Click to expand...
Click to collapse
I have the 08' audi a4 and my contacts sync just fine, as do the missed calls.
" my contacts sync just fine"
SIM card contacts? Google Contacts? Exactly which or what "contacts" ?
Hi, new user here to searched and figured it'd be better to post in this thread rather than starting a new one.
I'm another Atrix user who is having issues with pairing the Atrix to a bluetooth car kit. I've got the VW Touch Phone Kit (rebadged Bury CC9060) which used to work perfectly with my previous Samsung Omnia as well as my partner's Samsung S8500. The problem I have was that with the 1.57 firmware, I could initially pair the phone and it would sync the phonebook up fine so that I could make or receive any number of calls without a hitch. But the issue was when I switched the ignition off then back on, the Atrix appears to pair correctly, it'll grab the phonebook but cannot make or grab any incoming calls. When dialing from the phonebook, it will initiate the call then drop out while the call still goes through. Incoming calls just aren't picked up at all. If I deleted the pairing and paired the phone up to the car kit again, it'd work until the first ignition off and back on again.
After I updated to the 1.83 firmware, this no longer works for me at all even though it appears to pair correctly and syncs the phonebook as well.
I've looked into upgrading the software on the car kit but I'm already on v0181 which is the latest for the VW branded kit. The Bury CC9060 kit has available a v0235 update but won't load on the VW kit as it does a checksum check. I'm looking at possibly editing the flasher to bypass the checksum check.
Has anyone else used the Atrix with this car kit and experiencing the same issues?
Thanks in advance
fmflex
A quick bump.
I find it hard to believe that I'm the only one using an Atrix with this car kit...
I really wanted to buy a car kit, I was even willing to pay the rather high price. Then i saw tht the Atrix just "snaps it" with those two spring arms.
You know what happens in an accident? The phone will fly out as a missle. Good luck finding it, if you were doing 30 when you got slammed, the phone will still be doing 30 when it launches out of the clips.
If it doesn't hit you, you still won't be able to find it or call 911 on it.
So, nice dock, I'm holding off for something that can be used "in case of accident". For that price, I expect a more robust product, designed to survive. (Note to Moto, calls Mercedes and speak to crash safety team.)
hotleadsingerguy said:
"They" didn't. Audi/BMW did. They didn't spend enough time programming to figure out that Android handles contacts slightly differently. Put blame where it's due.
Click to expand...
Click to collapse
I am not sure that the blame can be directed to the car makers not suiting the android configuration.
I had concerns about Androids paring car bluetooth, so when my wife got her Samsung running Froyo before i purchased the Atrix, I tested it on my 2010 A4 and it all worked faultlessly. All phonebook, dialled, missed calls & received calls. All her contacts are stored on the Phone too, not the SIM. It actually worked better with it than my old Nokia's, and my old iPhone 3G. All of which had contacts stored on the phone not the SIM.
Being in my car all day, I had to make sure it the Atrix running Froyo would work too, and that's why I tested it with my wifes phone before buying the Atrix.
I would have to say that the problem does have something to do with how the Atrix handles bluetooth. I have been having all the same issues that other users are having.
To be fair to the Atrix, I had only one problem when I originanlly bought it and that was loading the contacts from the phones storage, all the other options were working and it never displayed the annoying error message and it never dropped the connection either.
This has only started playing up completely since I rooted it and installed HeLauncher with Fancy widgets (maybe it's just a coincidence, but its unlikely i think IMHO).
I have since uninstalled the HeLauncher and Fancy Widgets, and yet the problem is still there, so I have no realistic reason why it isn't working anymore.
Because i work for Audi, I will check at work why this issue might be happening ( just with the Atrix not all the other Android phones) and see if their is anything that can be done to fix the issue.
Hi Staunch
I'd be very interested in what you can find out about this issue. I've basically got nothing out of VW and their official stand is that the atrix isn't compatible.
fmflex said:
Hi Staunch
I'd be very interested in what you can find out about this issue. I've basically got nothing out of VW and their official stand is that the atrix isn't compatible.
Click to expand...
Click to collapse
Ok, I have tried connectivity with the current version of MMI and it seems to pair up with NO error messages at all. It would appear at this stage that the new MMI generation have the "issue" fixed. I am still waiting for a reply from Service Technical Support to answer why the issue exists on the older MMI generations. It would appear that Audi in conjection with Apple focused their MMI setup for iOS, not considering Android OS's.
Will keep you updated once I have some more information about previous versions of MMI.
Blame the cars not the phone.
My phone works 100% well and perfect with my Acura.
I've also had fun trying to get my E46 3 Series BMW ULF BT module to talk to the Atrix - has no issues speaking to an older Nokia phone. Anyway after a LOT of experimentation I've finally pinned down the root cause of the problem, text messages (SMS).
I've yet to figure out the specific trigger but it is either the number of messages or something in a specific message it doesn't like. I figured this out because I noticed the envelope icon coming up on the BMW screen for 5-10 seconds before the bluetooth would drop out each time after connecting the pairing. Each connection only lasts 15 seconds at most.
Anyway there were 193 SMS messages in the car memory, maybe the 194th message was upsetting it. I deleted almost all the 1150 SMS messages in my phone and it was only when I got rid of all of them that it connected. I then had to manually clear the SMS messages in the BMW one by one (took a long while).
I then did some testing whereby I sent an SMS or two to my phone. I noted that the Atrix seems to periodly get asked to upload messages to the car. You can delete them in the car but if they are still on the phone, they come back shortly after. They always show as unread on the BMW unless you read them on the car screen. Reading them on the phone has no affect. Maybe the SMS side of BT headset support is borked on the Atrix.
So my conclusion is that while I don't know the detailed trigger specifics, for BMWs at least the Atrix Bluetooth issue comes down to SMS messages. My large contacts directory uploads in its entirety without an issue. The solution for reliable BT connectivity to the Atrix and a BMW seems to be in SMS message management. Get yourself a copy of SMS Backup from the market when you experiment.
Hope this helps others!
Matt
A few days ago I bought a device called GMATE ($80), a type of smallcell without display or keyboard which is inserted a normal simcard and communicating via Bluetooth to the Samsung Galaxy Player, which means an application is integrated with android, receiving and making phone calls, and SMS, in addition to allowing internet access GPRS.
It's a perfect combination that increases the possibilities of Our Player
IPhones must be jailbroken, a repo is added to Cydia, and then the Gmate app is installed for the integrated Gmate functionality. How does this work in Android?
In GooglePlay you can download a Gmate aplication that integrates the gadget with your android player (also convert your android phone in a double sim phone) and uses android phone's features like dialer, contacts, or any thirtd party aplication likes rocket Dial.
Received and Make calls don´t need special features, if you uses the Gprs/edge to internet (in places with no WIFI) need to be rooted.
The application is not compatible with my U.S. 5.0 Player.
CreekDirt said:
The application is not compatible with my U.S. 5.0 Player.
Click to expand...
Click to collapse
Go to skyroam webpage and ask for a .apk file, i have Intl 5.0 and working great, sometimes any aplication in GooglePlay seems to be incompatible for my SG player but, on a external apk source works fine.
Dutch 5.0
Thank you for the info! I will definitely buy one if it works in The Netherlands.
That does look interesting.
Anyone using it with the USA version?
Is there something similar that i can connect it to my player or to put it in the galaxy player? So this wey i dony have to worry if i get out of 10 neters or jf i fodget it at home
Sent from my YP-G70 using xda premium
Wow, wonderful find. I was looking for exacly something like this. Unfortunately, With ICS CM9 installed on my GP5 Bluetooth doesn't work =( (neither does the camera or hardware acceleration. They really need to fix that.)
So I can make phone calls/sms without having wifi?
oncaribe said:
A few days ago I bought a device called GMATE ($80), a type of smallcell without display or keyboard which is inserted a normal simcard and communicating via Bluetooth to the Samsung Galaxy Player, which means an application is integrated with android, receiving and making phone calls, and SMS, in addition to allowing internet access GPRS.
It's a perfect combination that increases the possibilities of Our Player
Click to expand...
Click to collapse
With the Gmate app, can your SGP connect to a regular cell phone with bluetooth or it can only connect to the Gmate?
testrider said:
With the Gmate app, can your SGP connect to a regular cell phone with bluetooth or it can only connect to the Gmate?
Click to expand...
Click to collapse
Gmate only.. I tried it with my other android phone and it doesn't work.
I came further when I changed my phone's Bluetooth id to "Gmate". It didn't connect because of a password failure
It's seems good
I don't quite understand... So besides buying the Gmate, would i need a sim card as well? secondly so would i practically be using a sim card with a data plan to use with gmate? but wouldnt that defeat the purpose of just using a smart phone with a card in it?.... these are all continuation Q's if the first is a yes lol.
This seems like a stupid question, but I'll ask anyway. How well does the device actually work? Does it keep a connection throughout the day, sending and receiving text messages without too much delay? I'm considering using this to replace my old dumbphone, but I'd rather not plunk down a sizable chunk of change with little indication as to how well this thing actually works.
Gmate calling speaker sound
Question: Does the sound come out of the front speaker while calling?
(I don't like to call everywhere with loud back speakers)
crowelfly said:
Question: Does the sound come out of the front speaker while calling?
(I don't like to call everywhere with loud back speakers)
Click to expand...
Click to collapse
I don't know about GMate, but on Groove IP (and probably others), the front speaker on the 5.0 is quite functional and is used for calls.
Mevordel said:
I don't know about GMate, but on Groove IP (and probably others), the front speaker on the 5.0 is quite functional and is used for calls.
Click to expand...
Click to collapse
Thank you for the info!
P.S. I like your rom a lot!
Cool!
Sent from my YP-G70 using xda app-developers app
EDIT: I HAVE FIXED THE MAIN ISSUE WITH MY GMATE, MORE INFORMATION BELOW
Well, my Gmate+ came in the mail today, and I've been playing with it for a little while now and am able to give first impressions. First off, the device is much smaller than I imagined, it easily fits in my palm, the vibration (on the plus version) is very loud. As for the function itself, it works. You can call and send and receive text messages (haven't tested the web access yet) with a few minor (and one major) annoyances. My device is currently a US SGP 4.0 running Terrasilent 1.1 and EtherealRom 2.3.
Minor annoyances I have found with the Gmate+:
- Notifications (read: texts) do not make noise/vibrate while the screen is locked. Once the screen goes on, if you do have a new text, it notifies you, kind of ruining the point of the notification.
- Text messages you send have proper time stamps, for some reason, the ones you receive are off by a few hours, as if the sender is in a different time zone
- Seems to be no way to delete contacts from the address book, even uninstalling, wiping data, reinstalling didn't do anything about this.
Major annoyance with the Gmate+:
- It disconnects, and by that I mean it disconnects ALL THE TIME, the device is pretty much useless because of this, it will be fine for a few minutes, then disconnect, regardless of how close the Gmate is to my SGP. Every few minutes, I'd check it, and guess what? No connection. Sometimes it would reconnect, sometimes I'd have to manually do it, sometimes I'd have to restart one or both devices to get it to work again.
Seeing as everything the device does it actually does quite well when actually connected, I want to rule this problem to some battery saving tweak in my kernel/rom. As such, I'll be returning to stock and trying the Gmate again to see if any of these issues are cleared up. As it stands, I have a 75$ paperweight that buzzes occasionally.
EDIT: After flashing back to stock and noticing no change, I began searching around and found other people having similar problems with similar devices, mainly connecting their smartphones to the bluetooth sound system in their car. Turns out in Deep Sleep, the device has issues keeping constant bluetooth connection. After downloading an app (Bluetooth KeepAlive: ~$1.30) on the market that keeps the device from entering this mode, the Gmate no longer disconnects, and has remained connected for several days, having no problem with calls or text messages at any time. In summary, with this app, I am now happy to recommend the Gmate to anyone who is looking for this kind of functionality. Guess it goes to show that non compatible apps are listed in the Play Store as non working for a reason