I have a new O2 German and I want to change the lenaguage to English.
Please, how to do this?
It is possible to load MDA English ROM to German XDA?
Try this:
Works only for upgrade from O2 (any version) to Dangaard (Qtek) 1.60
1. Download the Dangaard ROM image @ http://goztreh.free.fr/eng.exe
2. Extract this file with Winzip to a new folder
3. Extract the attached file to the same folder
4. Start the conversion and upgrade by double-clicking convert.bat
Grtz,
Jos
do not do the dangard one
do the dutch upgrade, is perfect, you will find it here on the web, its from t-mobile nl. and everything is in english. super super quality. I hear of problems with the dangard one. Second reason for doiing the duth/english one is its perfect for further upgrades, no country problems
forgot to tell you
I have an german mda, and did the english upgrade, went back to german, and back to english, no problemo
How to do this?
I made all you said and nothing happen in XDA
I had extracted 2 files to a new folder, execute convert, accept in the black screen, an one of the files in PC were deleted.
And I can detec any change in my XDA., How to know it?
And after, what I need to do to change the language?
Did you first download the English rom from the site mentioned?
If you download it, you get a file called eng.exe.
You have to extract this file with Winzip in a new folder (make sure you have Winzip installed, right-click on the file eng.zip and choose Winzip->Extract to folder...
This should give you 6 files.
Extract the file "Upgrade O2 to DANG16021.zip" to the same folder.
Go to this folder and doubleclick convert.bat.
You get some messages of the ROM being converted, and the upgrade process starts.
What you are doing is putting a new English ROM in the XDA.
The old one is overwritten and all data is lost. So make a copy of the My Documents folder of your XDA (a backup is useless, since you can't do a restore on the new version from an older one).
Grtz,
Jos
Problems upgrqading
Thanks to Jos for the detailed information.
I did all you say, execute CONVERT with the 6 files in the same directory, the box CHECKING THE INFORMATION IN YOUR POCKET PC.... starts, but after lon time I receive the message ERROR 101: CONNECTION ERROR.
The xda is connected and working the activeSync Without problems, but the software says is disconnected!
Make shure the XDA is connected directly to your PC. Don't use an USB hub.
Once you ran CONVERT, you don't need it anymore. Just run HimaUpgradeUt.exe directly.
GER to ITA
I have a new MDA2 German and I want to change the lenaguage to Italian.
Please, how to do this?
You need to get an Italian ROM, but I have no idea where to find it.
And please, just post to one discussion and not to three with the same question...
Connection settings
Ok, I have connected directley the USB port.
It is necessary to have ActiveSync installed? And running?
How to set the xda? Any special mode (bootloader, etc)?
I have active sync installed. Just insert the XDA, wait until the sync is finished and run HimaUpgradeUt.exe.
Thanks
Thanks JOS for posting,
I have the same problem.
I have Just received an O2 XDA from Germany in German Language...I'll do your suggestion...
My question is: wich differents between O2 XDAII Rom Version 4.20.1081 and the Dangaard (Qtek) 1.60 you suggest ?
Thanks in advance.
Francesco
and 2° question...
There will be problems or incompatibility installing Daangard Qteq 1.60 on The O2 XDAII with the future Downloads Xda II ROM upgrade
coming in early 2004.
http://www.xda-2.co.uk/downloads/xda2_upgrade.html
Thank you.
Francesco
then you can just backup the rom you have before updating
and then change back to the back'd up rom before you update to the later rom
Great!!!
It worked fine...!!!
In 40 minutes I have got my new english rom image...
Thank you Jos.
Francesco
Can anybody help a poor newbie MDA II user?
Hi everybody! I'm from Italy. Yesterday evening i finally received the MDA II from Germany. It has equipped with:
ROM VERSION: 1.60.00GER
RADIO VERSION: 1.06.01
EXTROM VERSION: 1.60.07
As i can't speak nor understand german language quite well, i started to improve my knowledge in how to change German to English idiom from several days. I downloaded from the forum the ROM version from NL (RUU16006WWE_T-mobile_NL) that should use the english language. :shock: By the way... an italian ROM version doesn't exist...? :shock: I don't want to do mistakes that could compromize the life of my MDA II, so please, please, please, give me a hand teaching me how to start the upgrading (i.e. before the upgrading, have i to put the MDA II on its cradle and connect to the PC, etc, etc...).
Forgive me, i'm quite less than a newbie :shock: but i learn quickly! :wink:
Many thanks to everybody who will help me... and to whole community of course: you are the best!
Bizarra ROM for UK o2?
Hey guys, I have a new XDA 2, o2UK, but it has a few particularities: For one, active sync turning on all the time,...annoying...
Aslo, it says I have ROM 1.03.00 USA??????? Bizarrre, dated 9/23/03...old, and radio 1.05, Any idea which Rom Upgrade I should use? Can I upgrade through USB?
mikeycollins13 can you send me a copy of the radio stack and the ROM 1.03.00 USA pls
Pm it to me
Dangaard ROM image ????
Sorry, I can't download Dangaard ROM anymore. Someone can send it to my email [email protected] or put it on a free host like megaupload or rapidshare please ?
Many thanks
Hi to @ll,
I'm pretty new here and hope someone can help before I will mess up my cute wizard I have the wizard model of the german provider "Vodafone" it is called "VPA Compact II" here. When I boot my device it says it have IPL and SPL version 2.21.0001 so I assume I have a G4 device. I don't know yet ff it's CID-unlocked or not, but my question before doing any **** with my device I have following question:
actually it is a german version of WindowsMobile 5 installed but I would like to install greek language of WindowsMobile5. Is that anyhow possible, can I get such a ROM ??? I was not able to find and suitable ROM with greek language neither here nor at the linked FTP-sites, as the username and passwort xda:xda does not work for me.
Maybe someone can help a newbie?
Hi There,
I dont think there is a greek rom as far as I know
My phone was purchased in cyprus and it is just all english.
Just got to live with it I suppose.....
Anyone else has information about this issue?
dear users i am in real touble i have a Qtek 9100 its language is italian i wanted to change it into english in pda here is no english language in it my friend tell me that your phone is G4 and your CID is open you can post your problem to xda forums and users helping you and he also tells me that i can get the english language by changing the wm5 to wm6 he dont have wm6 plz give me link of wm6 and tell me how to check that the Pda is G3 or G4 and what is this for thanks if you have and give me the good information i am new to pocket pc mobiles (plz! do this)
A very long sentence...
Please read the stickies and you will find the ShellTool method to flash a ROM to G4 device.
You don't need WM6 if you just want to switch to English. Look for the "Wizard Love" ROM (That can be flashed through RUU directly).
(Alternatively, you may try the new SoftSPL method)
hello boys!
I want to modernize the version of my imate jamin from wm5 to wm6. version italian
the model of the device is:
1) pm300
2) PocketPC
buongiorno!
First, you should read the wiki : http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
As you're italian, you should have a look at gullum's multilanguage roms, there is one in italian.
Noooooooooooooooooooooooooo!!!
Not found the rom wm6 good!
the links of this page do not work
"http://forum.xda-developers.com/showpost.php?p=1279985&postcount=1"
in this moment I have pocketPC with the screen white. the software winimage is open, but I do not succeed to download one rom of wm6 ita for my pocket.
help me!
But is possible incompatible with windows vista? the update rom software the block when arrived the screen with remaining 10 minuts. the PDA in this moment result disconnect of the pc. why?
help me!
windows 4 jamin
I have jamin modle: pm300
I don't know which windows I have, where I can find new version for free.
any ideas
thanks
i am facinging same
Pl. help me also if you get the link.
thanks
Hi,
I've upgraded my qtek 2020 from wm2003 to a wm6 rom ( several from the forum: efsane; shekhar; tofclock), and in all of them i got the same problem:
The phone doesn't make call's, the phone button doesn't work, the phisical one (the green one) and the software phone program.
When i reset it, it appears "no gsm", and the rom version (if this helps)
Probably it's a very simple thing, but i can't figure it out, some help please.
I would try another radiostack
Thanks Rudegar!!!
Thats it!!!
I've installed a differente radiostack, and now works great!!
Thanks
Guide to do same upgrade
Hi setekecas,
Is there any possibility of you providing me a guide of how I can upgrade my Qtek 2020i to WM6..
I've been searching and reading but never seen anythig that has been soo well succieded in making this upgrade..
Thank you for your help or anyones help..
Jonathan Cunha
Abraço
Hi
Im from spain, sorry because my english level is low. I can upgrade my Qtek to windows mobile 6.1, Windows mobile 5.0?
Thanks but if possible in spanish.