Hi guys,
After updating to 2003SE using easy bootloader/himaupdate.exe method my SD locks the unit after insertion or from boot. Was ok before (transcend 256Mb card) worked for last year+ till tonight.
Before I tried that method I bootloader/console dumped old rom image to the card, but ive formatted it now a few times with FAT and FAT32, no luck, still locks unit now.
Any ideas anyone?? Thanks.
Also, accessing start menu now causes a hardware style interlace looking flicker down the bottom 1/4-1/2 of the screen. Anyone???
Congrats and thanks to everyone involved with the 2003SE update, ... now if only this SD card works...
Cheers
WARNING !!!! I have tried a new 1Gb ATP SD Card and a new Kingston 512Mb SD Card and both brand new cards also lock the unit.
It would appear the 2003SE flash is incompatible with some revision hardwares and causes the SD slot to cease working correctly.
Also, the update causes the blacklight to sometimes flicker very fast, likely damaging the life of the backlight.
Be warned...
No problem
No problem .
Get the Pocket Mechanic http://www.antontomov.com
I have fillings it will help .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi,
Thankyou for the advice, however when inserting the sd card it locks the unit down hard, even with pocket mechanic ready to format, or running from boot quickly before it locks (once detects sd).
Seems the flash really killed the SD slot on my h/ware since no other reports it must be revision related at this point, bootloader can still read/detect updates on SD so its an update issue I think
The biggest problem
:arrow: The biggest problem I had with 2003SE is :
Poping up mesaage with "Need more memory" for Contacts .
I had to do the Hard Reset for a couple times .
Now I am OK .
Related
help~ can any1 help me with tis problem???my 3125 always restart suddenly.
beside that the memory card fail 2 read after a certain period.
i 've try 2 flash it. but it still same.
now i'm using RUU_STAR100_4.1.502.5_02.79.30_CWS_SHIP
thank you~
Beside that, any 1 face tis problem be4???and how u guys solve it???
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
changhorng said:
Beside that, any 1 face tis problem be4???and how u guys solve it???
Click to expand...
Click to collapse
I have the same 2 problems with this restarting things and SD card problem.
Still cannot solve.
I also found the same problem. I have sent it to HTC support in Thailand. They cliam that it's "HARDWARE" error need to replace Mainboard.
guys, try this solution:
1.take out your memory card 1st
2.flash to another rom
3.flash back to the rom u which 2 use
4.install back the memory card
5.dont put your ringtone in memory card...copy it 2 phone dont share it in memory card...if can dont share any program in memory card too~
after i try tis, restart problem solved actually is the restart average decreased
but memory card problem still cannot solved....
try it and post your result here whether its work on your phone or not.....ty
the restarting is due to the little tiny button that is depressed by the battery cover. however, the cover doesnt completely press it down so when the phone is jerked around or somhting like that, then it restarts because the button gets un-pressed for a second.
to fix this, take a little bit of tape and make a small square out of it and just tape it over the button. this way, the button will be pressed a little more and should stop the restarts.
as for the microsd card not being recognised, the best thing to do is to simply restart your phone. this is a common problem with the startrek
Yeah, thats right zekky! People, read carefully zekkys post. I had a same problem half a year ago. And, after i have placed small square part of paper inside, phone stops restarting, and SD card also works perfectly.
but for my problem, de solution works on my phone....de problem tat havent fixed is de memory card problem....so tat's y i post it and ask u guys 2 try it~
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
^^That's what's at the root of my gtab's /sdcard.
Also, there used to be two folders in that that I had created and are no longer there.
Here's what I was doing immediately before I noticed this:
I'm currently using TnT Lite. I need to be able to access wifi at work but my company uses EAP encryption and TnT doesn't have a setting for EAP. I decided that rather than switching roms, I would just switch settings menus (using the files found here: http://forum.xda-developers.com/showthread.php?t=857939).
Stupid me, I downloaded them to /sdcard2 rather than /sdcard. I booted into clockworkmod and tried to install the zip from the sdcard but clockworkmod couldn't find anything. I realized my mistake and rebooted the gtab and hooked up the usb to my pc. That's when I noticed the file corruption.
Everything still seems to work as it did before, I just don't have access to any of the files that were in those folders.
In case it matters, one folder held the TnT Lite rom and the other held several videos.
Does anyone have any idea what could have caused this?
Should I try to delete the corrupted files?
Any help with this is much appreciated.
I don't claim to know why this happens this is just what I did to fix my problem.
I noticed this on my gtab also, to the point my cal program wouldn't open. The only way I could fix it was to do an sd partition to it fix the issue. There are instructions on how to do that with cm8. This is from memory so please double check, go to the advanced options choose sd partition 2048/0. Please note that this wipes the sd card so back up prior.
I still get a few of those weird files buy not like before.
same thing happened to me but hasn't come back after
re-partitioning with cwm ... maybe that is the fix
I would *really* like to know why this happens (that and why
the sdcard2 gets wiped out sometimes).
Basically, you dare not trust android with any important data
and you never know if what's on it will disappear suddenly
Unfortunately, this makes the tablet just a toy
So is the best option really just to re-partition the sd card?
If I end up re-partitioning, will I have to flash the ROM over again? Or does partitioning just remove the user data?
Quote: will I have to flash the ROM over again?
No
First of all, this is not related to any unsuccessfull flash process, I got my S3 in 2012 and it worked like a charm after many flash processes. The last ROM is - was :'( - Blekota Note 4 Lite 5.2
The problem came when this morning, I plugged my phone to charge, it was 3% battery, I left it for 1 hour and when I came back, the back of the phone was very hot and the phone screen hanging on the first image of boot animation. I unplugged it and removed battery, once turned on, it did not leave the samsung logo. I suppose the chip simply fried...
I was looking for a solution and found something that may be for help, but the solution i found was for SGS-I9000, the process did not work for my S3 (this one with two others related to sgs1), I formatted the sd card with 16GB Ext 4 and 16GB Fat32.
As I am not familiar with scripts and linux commands, my question is simple:
Is there a way to install a ROM in external SD card ? my phone starts in download mode and I am able to flash TWRP (or any other recovery) via odin, this one shows me Internal SD card capacity as 0 when I try to install anything. See attachments below, the red messages appear also when trying to flash stock firmware , after the first reboot (I9300XXEMD3_I9300OJVEMC1_I9300XXEMA5)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you cant mount anything, its either your internal storage is burnt too or corrupted from being affected by the burn. Your s3 might be basically destroyed
Jericho Arcelao said:
If you cant mount anything, its either your internal storage is burnt too or corrupted from being affected by the burn. Your s3 might be basically destroyed
Click to expand...
Click to collapse
That's the point of trying to install system in external SD
Unfortunately that is impossible. Sorry
After nine months of working perfectly, my Verizon G3 has developed constant problems with corrupted and unusable SD cards.
What typically happens is that the card works fine for a few hours to a day, then it starts throwing an error message saying the card is corrupt and needs to be reformatted. I've tried everything I can think of and all the advice I've seen on various forums, including removing and reinserting the card, reformatting it and even replacing it with a brand new one. Sometimes it doesn't even recognize that the card is in there if I've pressed it in all the way; if I insert it four-fifths of the way, the card will work for a while before I get the "corrupted" message.
My current card, a 64GB SanDisk Ultra Micro SDXC, worked for a day yesterday but stopped functioning today.
Is it possible this is a hardware problem rather than a software issue? I have tried updating the firmware too (I'm running a nightly of Cyanogenmod 13).
Anyway, I welcome any suggestions.
Update. I installed SD Card Monitor and am seeing a bunch of unmountings, ejections and "bad removal" errors. What would cause this?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Likely hardware issue. There have been others who've had similar issues.
The whole SIM and Micro SD card tray combo in the VS985 is unreliable. After just one month shy of two years, my wife's suddenly stopped reading any SIM card, including the one that worked perfectly in my VS985 and the one in my VK810 LG Pad 8.3 and another she had from a 4G dongle she is to use.
LG wanted $75 to repair it. We bought different phones, I had been wanting to move on soon anyway.
Didn't have any trouble on 48A or 49A before replacing my phone.
Time to get a new phone. The SD Card slot has gone bad. I had the exact same issues start back in November and eventually, the phone died completely. It started with it unmounting the card, then stating it was corrupted and finally refused to keep a card mounted. I flashed back to 10b and other versions, as well as tried in safe mode, but eventually, it wouldn't work anywhere.
Oh, and when I would put the so-called "corrupted" card into another device or my PC, I would have to reformat it, but then I did a check on my PC and the device checked out fine. No bad blocks, etc. And the SD card would not fail in other devices, so that definitely pointed to a hardware failure in my G3. And now with the black-screen-of-death, it's a definite for me that it died. :crying: :crying: :crying:
Hi, I have a ZTE Spro 2 MF97G running software version "SPRO2GV1.0.0.0B03"
It is running the stock ZTE firmware (not rooted or any other modifications), but it seems to have a software issue that could use even a reinstallation of the same software version, as a factory reset does not fix the issue.
The issue is that a system process is misbehaving, and the issue happens even if you factory reset and not even connect it online or install anything. Furhtermore, if you leave it offline thus preventing any updates or anything else besides a single sideloaded APK to monitor CPU usage, it becomes clear that regardless of what is done, a system process is using nearly al of the CPU time, this prevents the device from properly going into standby, and impacts performance. The device also remains warm the entire time due to the high CPU usage holding the cores at 1.95GHz constantly.
The process at issue is /system/bin/netmgrd
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What I would like to do is a fresh install of one of the ZTE SD card packages, but since ZTE has discontinued the device, they also removed its files from their update server, as well as removed the downloads for it from their website.
With this in mind, is there any way to get a hold of those files?
I wonder, does anyone else have this issue, even if they can't find another SD card package, it would be interesting to know if I am the only one with this issue.
I guess they killed the download section of their site before anyone was able to download any of the SD card packages.
ZTE support was able to get a SD card package made available, though sadly, the netmgrd issue still remains.
The SD card package is at https://www.zteusa.com/zte-spro-2-wifi.html
https://download.zteusa.com/product...400B1557SPRO2GV1.0.0B03(SD card software).zip