Newest Release!
PLEASE READ THIS WHOLE POST BEFORE YOU GET 2 WORK WITH IT!!!! USE AT OWN RISK!!!!
EXEC:\Extended_ROM\Set_Button_Lock.exe
CAB: \Extended_ROM\AboutDiamond.CAB
CAB: \Extended_ROM\AltTab.cab
CAB: \Extended_ROM\Blackberry.cab
CAB: \Extended_ROM\BL_GraphiteLabel_kb_skin.cab
CAB: \Extended_ROM\Caller_ID.cab
CAB: \Extended_ROM\Camera.cab
CAB: \Extended_ROM\ClearType_Landscape.cab
CAB: \Extended_ROM\ClearType_Tuner.cab
CAB: \Extended_ROM\DiamondSettings.cab
CAB: \Extended_ROM\Explorer.cab
CAB: \Extended_ROM\GPRSMonitor_WWE.sa.CAB
CAB: \Extended_ROM\IintelliPad_TMO_WWE_B12.CAB
CAB: \Extended_ROM\IntelliDialer.cab
CAB: \Extended_ROM\IntelliDialer_Skin.cab
CAB: \Extended_ROM\IntelliPad_Skin.cab
CAB: \Extended_ROM\Midi_Ringtone.cab
CAB: \Extended_ROM\MMS_Composer.cab
CAB: \Extended_ROM\PocketPlus.arm.cab
CAB: \Extended_ROM\PVideo_MMS.cab
CAB: \Extended_ROM\RegEdit.cab
CAB: \Extended_ROM\Reset.cab
CAB: \Extended_ROM\Running_Programs.cab
CAB: \Extended_ROM\Tray_Launch.cab
CAB: \Extended_ROM\Version_BT.Handsfree.cab
CAB: \Extended_ROM\WiFi_Tools.cab
CAB: \Extended_ROM\Rotate_Screen.cab
CAB: \Extended_ROM\WLAN_SDIO_V1_Driver.CAB
Change your country id if you like: 0x20040305
http://forum.xda-developers.com/viewtopic.php?t=12101
INSTALLATION:
Please login or create an account so you can download the Attached file!
1. Download the file below.
2. Unzip it to a local folder (its a self extracting archive)
3. Put phone in BOOTMODE (Press Power,Softreset and the Round Button all at the same time. Your phone will show: Serial v1.0x put it in the cradle)
4. Run the "HimaUpgradeUt.exe"
5. Follow the instructions on the screen.
6. After upgrade you wil need to setup your phone regional settings etc.
7. Once you finished that the autoinstaller will start, you will get some messages with version differences but just tap OK.
8. And when its completed preform a SOFT Reset
9. And your done!
IMPORTANT!
RESET THE PHONE AFTER THE SETUP IS COMPLETED(THE AUTO INSTALL).
Don't restore a full backup, becouse this will overwrite the enhancements!
Example:
If you make a full back-up on version 1.0 and restore it at the 1.2 version you will end up with the 1.0 version. So keep that in mind. Contact & Appointment back-up is allowed this wont destroy anything
YOU CAN CONTACT ME WITH YAHOO MESSENGER BUT ONLY FOR SUGGESTIONS, HELPING ON THE PROJECT AND OTHER OFF TOPIC/FORUM STUFF!! REMEMBER: IM NOT A SERVICEDESK!! BEFORE YOU ASK ME SOMETHING SEARCH FORUM FIRST!!
YAHOO:
OMEGA2MAD
GOOD LUCK!!
Secure your phone check this out!
http://wiki.xda-developers.com/index.php?pagename=IIWPO
How to install *.CAB files on my phone?!!
1. Put your phone in the cradle.
2. Open Active Sync
3. Click File->Explore (A screen will pop-up and you will see the files that are on the "My Documents" directory of your phone)
4. Copy the *.CAB file and Paste it in the "My Docments" directory of your phone.
5. Take your phone out of the cradle.
6. Start Explorer on your Phone
7. Browse to the "My Documents" directory
8. Tap the *.CAB file and it will be installed.
9. Follow the directions on the screen(If you get a version error just ignore it)
Thats all!!!
TROUBLESHOOTING:
The Album Issue:
hi,
I have upgraded my pocket pc to the diamond 1.1/1.2 ROM version. but when I now try to open pictures stored on my storage card or even pictures I just made, it says "cannot find image (or one of its components). make sure the path and filename are correct and all the required libraries are available"
what can I do to solve this problem?
thx
Click to expand...
Click to collapse
Solution:
1. Start the Album program Tap: Tools->Option then tap the Associations tab.
2. Untap all checkboxes then tap OK then close Album
3. Start Album again and check the boxes and close Album
It will work now..
I hope 2 have it solved permanently in version 1.3!!
The GPRS-Disconnect Issue:
johndope said:
hey m8 how about a disconnect button for the gprs setting?
Click to expand...
Click to collapse
Solution:
To disconnect the GPRS hold down the red hang up button for 5 sec.
I hope 2 have it solved permanently in version 1.3!!
Sorry for the inconvenience..
Can you also make it for the caller id Qtek
or when you finish,point me to what to change...
thanx
sounds very good
that is where lots of mda2 users from t-mobile nl are waiting for..
hope to see it here soon.. :lol:
..
Its the first rom i build but its not 2 hard if you read the forum.
i already have it on my phone and it works quite good.
im gonna build it so its perfect but if you want you can suggest me good progs for the rom. i will post the progs already in my rom later on.
OMEGA_T-Diamond 1.0SE ROM
thx!!
LOOKING FOR THE ROM SCROLL BACK UP!!
looks good for a start!
did you think on.. powerpoint viewer, pdf viewer, microsoft reader, and word and excel... or are these allready in it?
gr roland 8)
Pocket word/excel are in it already but pdf not yet but that can be done
Finished?
Please when you are finisched.
let me know.
I'm would like to have the 2003 SE for holland.
with kind regards
Martin.
Orange variant?
Kan ik na installatie ook de operator aanpassen? Of moet dit er gelijk bij ingebakken worden?
Hoor 't graag!
:shock:
Orange
Ehm ik weet het niet zeker want het staat er niet op maar ik heb zelf ook een O2 verzie op mijn telefoon gehad en dat werkte perfect!
En mocht het nu niet werken kan je altijd weer de originele terug zetten van de Orange die ze op de site hebben staan. (Als downgrading kan dan dit is terug te vinden in het forum)
Ik hoop je genoeg geinformeert te hebben.
OMEGA_ReD
is there allready a rom for download?
hello,
i was wondering if there is all ready a rom ready for download?
gr
roland
that would be wonderfull
great
Lots of people are waiting for this !!
Can I make the caller ID Qtek?
Can I make the operator KPN?
Thanks, Peter.
Can't you make a list of features u want to put into this? and maybe a request list or something.....
Sounds very nice, i'm looking forward to this!!
Maybe some fax software like KSE fax? In win2003 it's included ( i had to buy it for my qtek2020)
I am waiting for the files to try.... can't wait
good luck...
Kan iemand even de nederlandse GPRS instellingen posten ben ze kwijt
zalk die probeere in de volgende verzie in te bouwen. dat wordt dus de verzie na degenie die hier onder staat.
I SUGGEST YOU TRY THE NEWEST VERSION! SCROLL UP!
ALSO READ THIS!
http://forum.xda-developers.com/viewtopic.php?t=12101
i'm now installing it
thanks for the download, i install it now...
just because i trust the maker..
i will send him a pm after the install..
and let you all now how it goes..
bye..
roland :wink:
IT WORKS !!!!
Hello again..
it is working..
did test a lot of functions..
the only thing that isn't work is mediaplayer... it close it selve within seconds..
but i think that can be fixed..
thanks !
splashscreen..
almost forgot..sorry..
the splashscreen looks real good..
bye
Related
Hi,
now that we have a very nice tool to edit the contents of the extended-ROM file before upgrading the device I am trying to figure out which CABs to leave in the ext.-ROM and which better to install later.
Perhaps someone could help me out with what the following CAB-files exactly install (It is the original, german T-Mobile ROM-Update) and if I can safely remove them or bette keep them:
CAB: \Extended_ROM\TMD_DE.sa.CAB
CAB: \Extended_ROM\TMCOMREG.sa.CAB
CAB: \Extended_ROM\MIDI56.sa.CAB
CAB: \Extended_ROM\CameraRC131_GER_1.5.sa.CAB
CAB: \Extended_ROM\CallerIDRC11_GER_1.5.sa.CAB
CAB: \Extended_ROM\MMS1504_GER.sa.CAB
CAB: \Extended_ROM\VideoMMS.sa.CAB
CAB: \Extended_ROM\GPRSMonitor_GER.sa.CAB
CAB: \Extended_ROM\ClearVue_GER.sa.CAB
CAB: \Extended_ROM\TMD_AP_DE.sa.CAB
CAB: \Extended_ROM\OEM_AKU1_GER.sa.CAB
CAB: \Extended_ROM\OEM_GER_03120301.sa.CAB
CAB: \Extended_ROM\Version_AKU1.sa.CAB
CAB: \Extended_ROM\Broadcast_GER.sa.CAB
CAB: \Extended_ROM\t-mobile_shortcuts_only_DE_PPC2002_ARM.CAB
CAB: \Extended_ROM\TMDDECustomize.sa.CAB
Thx ind advance
DLSkyNet
Hi,
could you post the ms_.nbf file here, I would like to compare the settings to those of T-Mobile NL, Qtek and O2.
What I found so far (all names refer to the T-Mobile NL ROM):
Broadcast_WWE.sa.CAB:
Seems to only set the CellBroadcast setting to enabled or disabled. (I guess this refers to the Reception of News via SMS by selecting channels of interested. Quite expensive I think and only interesting for phones that do not have any other capabilities of receiving and displaying information).
T-Mobile NL sets it on, with O2 it's switched off.
CallerIDRC11_WWE_1.5.sa.CAB:
Installs the CallerID application from IA Style and the Photo Contacts extension. There are other programs that are able to provide this functionality but I use it.
CameraRC131_WWE_1.5.sa.CAB:
The camera application for taking pictures and recording videos. AFAIK there is currently no alternative to this one, you should leave it in your ROM.
GPRSMonitor_WWE.sa.CAB:
Includes the GPRS Monitor from SPB Soft. Very useful I would recommend it unless you aren't going to use GPRS anyway.
MIDI56.sa.CAB:
RingTone plugin player. Allow you to play back RingTones in the following formats: mid,3gp,mp4. Also seems to register the audio/midi MIME type for playback of midi files directly from Internet Explorer.
By default the xda can play back only wav and wma audio files (AFAIK)
MMS1507_WWE.sa.CAB:
Installs the Arcsoft MMS application for composing and sending MMS messages.
VideoMMS.sa.CAB (not contained in Qtek):
Installs the "Video MMS.exe" file into the Windows folder. When you start it you are in camera mode immediately and after you have recorded a picture or video you get into MMS composition mode.
This seems to be just an easier way to compose MMS messages since the main MMS Application (see above) is already able to compose MMS messages.
OEM_AKU1_WWE_4AP.sa.CAB (named OEM_4AP_WWE.CAB in Qtek ROM)
Installs the following files: GPRSAuthentication.exe, BTSetting.exe, STK.exe and WModem.exe
I am not sure if these are customized versions or if the normal ROM doesn't contain them. Well perhaps not because these are specific to the Phone edition so they can't be present in the main ROM, maybe they are contained in the Radio ROM, but probably they are only contained here, meaning you shouldn't remove this cab file.
OEM_WWE_03120301.sa.CAB (named OEM_WWE_03122301.sa.CAB in Qtek ROM)
Installs files for Bluetooth: AudioGW.dll, BthASPlugIn.dll, rilgsm.dll, Serial3.dll and Wavedev.dll. Also contains the new feature of mapping a (dynamic) serial port for BT.
I think you should not remove it.
TM_phone_class10.CAB (not contained in Qtek):
Installs several registry settings regarding phone functionality. (See my other post regarding this topic: http://forum.xda-developers.com/viewtopic.php?t=5539)
TMCOMREG.sa.CAB (not contained in Qtek):
Contains some of the settings contained in the previous one anyway. I'm not sure if it does anything else but I don't think so.
TMD_AP_NL.sa.CAB (not contained in Qtek):
Implements several settings specific to T-Mobile (NL): Restricts video types for MMS. Adds connection and gateway settings for MMS connection via T-Mobile NL. Adds a T-Mobile profile to GPRS Monitor.
I would not install this cab unless you live in NL!
TMD_NL.sa.CAB (not contained in Qtek):
Sets the HKEY_LOCAL_MACHINE\SOFTWARE\OEM\3rdversion\MSYSTEM1 value to the provider name.
Not required!
TMDNLCustomize.sa.CAB (not contained in Qtek):
Adjusts all the "theming" stuff: Changes colors, installs Today-theme, installs T-Mobile Dialpad, sets T-Mobile ringtone.
If you don't like you xda2 look like a pink pig you should leave this out.
(You can extract single items from the cab file if you like)
t-mobile_shortcuts_only(UK).PPC2002_ARM.CAB (not contained in Qtek):
Contains some strange things that seem to me rather useless: "WebDisplayText t-zones", "T-Mobile Resetter.exe", "T-Mobile PIE Launcher.exe", "TMobileWebToday.dll", "T-Mobile Homepage Plugin".
I wouldn't install this one!
Version_AKU1.sa.CAB (Version_AKU1_160.sa.CAB in Qtek):
Seems to only set the version number of the extended ROM in the registry.
Any comments are welcome...
softworkz
Hi Softworkz,
I hope to manage the upload-functionality - it is the original and unmodified ms_.nbf of the German T-Mobile 1.60.07 ROM-Update
I did a hardreset yesterday and softreseted the MDA II before customization started. Afterwards I manually installed only the following aplications:
CAB: \Extended_ROM\MIDI56.sa.CAB
CAB: \Extended_ROM\CameraRC131_GER_1.5.sa.CAB
CAB: \Extended_ROM\MMS1504_GER.sa.CAB
CAB: \Extended_ROM\VideoMMS.sa.CAB
CAB: \Extended_ROM\GPRSMonitor_GER.sa.CAB
CAB: \Extended_ROM\OEM_AKU1_GER.sa.CAB
CAB: \Extended_ROM\OEM_GER_03120301.sa.CAB
CAB: \Extended_ROM\Version_AKU1.sa.CAB
CAB: \Extended_ROM\Broadcast_GER.sa.CAB
The whole re-installation is now finished and I am happy to have gained approx. 2,5 hours of batterylife!
Greetings
DLSkyNet
Hi,
and thanks for the ROM. I will have a closer look at it during the next few days!
You are welcome softworkz - thanks for your great tool!
DLSkyNet
The whole re-installation is now finished and I am happy to have gained approx. 2,5 hours of batterylife!
Greetings
DLSkyNet
How does removing files/programs affect battery life?
Hi cruisin-thru,
just take IA-Caller as a very good example. IA-Caller is (only) responsible for displaying pictures or photos for incoming phonecalls. To achieve this it has to run in the background all the time. And as far as I know it is not programmed that "well-behaving" (battery-saving) as it should or could be.
I do not need those pictures for incoming calls (name and/or number are still displayed) so I decided not to install IA-Caller. And there seem to be many more tools like IA-Caller, not necessary but battery-wasting...
DLSkyNet
Can anyone confirm some of the CAB files in the O2 EXT ROM?
I've pasted the list here and tried my hand in discribing some based on the posts on this thread.
My assumptions here are merely guesses, so we pretty much need a confirmation form people like softworks or itsme.
Feel free to correct any mistakes/misunderstandings so I can edit my post immediately to reflect the correct information.
---------------
Somewhat familiar CABS in O2 EXT ROM
xmailinstaller2003.PPC_ARM_2003.CAB (3rd party email app?)
Broadcast_WWE.sa.CAB (already listed above)
MIDI.sa.CAB (already listed above as MIDI56.sa.CAB)
CallerID_WWE.sa.CAB (already listed above as CallerIDRC11_WWE_1.5.sa.CAB)
MMS_WWE.sa.CAB (already listed above as MMS1507_WWE.sa.CAB)
Camera_WWE.sa.CAB (already listed above as CameraRC131_WWE_1.5.sa.CAB)
ClearVue_WWE.sa.CAB (3rd party doc viewer)
o2ActiveUI.CAB (O2 ActiveUI Today plugin?)
O2UKCustomize.sa.CAB (listed above as TMDNLCustomize.sa.CAB)
Version.sa.CAB (listed above as Version_AKU1.sa.CAB)
O2_AP_UK.sa.CAB (listed above as TMD_AP_NL.sa.CAB)
Questionable CABS in O2 EXT ROM
OEM_WWE.sa.CAB (listed above i guess as the OEM cabs, but in O2 there's only one and in the post above there are 2 OEM_AKU1_WWE_4AP.sa.CAB / OEM_WWE_03120301.sa.CAB)
temp.sa.CAB
msmsgs8.CAB
CABS Not included in O2 EXT ROM:
VideoMMS.sa.CAB
GPRSMonitor_WWE.sa.CAB (wonder why it's not included in ALL types of handhelds, or maybe they just renamed the cab)
TM_phone_class10.CAB
TMCOMREG.sa.CAB
TMD_NL.sa.CAB
WIth regards to the cabs not included I wonder if it's possible to plug some of them in the O2 (such as the VideoMMS.sa.CAB, as it seems pretty nifty)
---------------
Also checked the config.exe and want to clarify commands based on the few lines at the end of the Config.txt
CAB: \Extended_ROM\xmailInstaller2003.PPC_ARM_2003.CAB
CPY1:\Extended_ROM\o2ActiveUI.CAB
CPY2:\Windows\V2R\setup\o2ActiveUI.CAB
CPY1:\Extended_ROM\o2ActiveUI_Eng_Setup.exe
CPY2:\Windows\V2R\o2ActiveUI_Eng_Setup.exe
EXEC:\Windows\V2R\o2ActiveUI_Eng_Setup.exe
So I'm assuming that the line containing:
"CAB:" installs the cab to whatever default installation path.
"CPY1:" and "CPY2:" are your verbose copy commands, the latter being the destination
EXEC: obviously is an execute command.
If my assumptions are correct then it's possible to put whatever kind of file in the EXT rom (e.g. Themes) and use the CPY commands to put them in the directory for the handheld to recognize them right?
Hi,
I have made an Arabic Extended ROM WM2003se for STC with some nice programs ..
I hope you like it ..
Here are the contents :-
CAB: \Extended_ROM\CallerIDB10_Hima25_WWE.CAB
CAB: \Extended_ROM\CameraB10_Hima25_WWE.CAB
CAB: \Extended_ROM\ClearVue3.4.381WWE_0616_Ozonup.sa.CAB
CAB: \Extended_ROM\MMS15024_WWE_Hima_OzUp.sa.CAB
CAB: \Extended_ROM\cLaunch.arm.cab
CAB: \Extended_ROM\Default_AACERT_arabizer.CAB
CAB: \Extended_ROM\Default_ACERT2_arabizer.CAB
CAB: \Extended_ROM\Default_AHijri_arabizer.CAB
CAB: \Extended_ROM\Default_APrayer_arabizer.CAB
CAB: \Extended_ROM\Default_Dict_arabizer.CAB
CAB: \Extended_ROM\Default_iPhone_arabizer.CAB
CAB: \Extended_ROM\Pocket Controller.PPC300_2577.cab
CAB: \Extended_ROM\IntelliDialer_T-Mobile_WWE_RC10.CAB
CAB: \Extended_ROM\O2.CAB
CAB: \Extended_ROM\battery_OU_081304.sa.CAB
CAB: \Extended_ROM\bluetooth.CAB
CAB: \Extended_ROM\SmartFilterPE_Professional.arm.CAB
CAB: \Extended_ROM\STC_Saudi_Arabia.CAB
CAB: \Extended_ROM\extrom_tools.cab
CAB: \Extended_ROM\ThePad.ARM.cab
CAB: \Extended_ROM\Ruler.ARM.CAB
CAB: \Extended_ROM\pTravelAlarm_PPC2003.STRONGARM.cab
CAB: \Extended_ROM\Version_OU.sa.CAB
RST: Reset
Waleed
Good job Waleed, Thanx
it seems you forget to write the download link for your Extended ROM!
regards.
Othman
Mr. Guest you have to join to see the link :wink:
Very nice work Waleed.
Thank u very much Waleed. please tell me the password as i want to change the operator cab. best regards
The password
Sorry ...
The password is 0x20040305
Thanks man
well Done!!!
Assalamu alaykum,
Does this Arabic Rom work on the O2 XDA IIs ?
I am going to Jordan soon and am considering putting a purely arabic rom on my device.
Can anyone advise?
Imran.
Hi all,
waleed i hae IMATE PPC:
ROM 1.72.00WWE
DATE 03/15/04
RADIO: 1.14.00
PROTOCOL: 1337.24
EXTROM: 1.72.810
Can you advise me what i need to upgrade to the latest version you are using and happy with ....
i downloaded your file but i am sure i need some other files.. please advise.
thanks
please help
i have downloaded the file and it only contains one file ms_.nbf
how do i do the update
please explain more
thank you
To open ROM files (ms.nbf or nk.nbf) u need ER2003edit
Hij Marouf ;
Here is the site where u can download the sofware :
ftp://ftp.xda-developers.com/Tools/
To download other stuff from XDA site u can see this :
ftp://ftp.xda-developers.com/
ya man it says permission denied i think XDA have block access from ME to their ftp server and what software do i need please let me know
thanks alot for ur help and i really do appriciate it ya man
yallah salam ya heleo
ER2003edit for opening ROM fles
Hi Marouf;
Try to open the at link again if not then i wil try to send that to u via e-mail or in this site if it is possible !!
Hi IT doesn t work for me can anybody help me thanks
Guys the arabizer suit works on Imate devices only!! So there's no need to test it, otherwise you change ur IMEI
Hi all,
[Amended] -
I will post all the links of WM2003SE usable software and related components here.
Please keep this as a one-stop shop to reference all the various postings.
If there are errors, please help me to point them out so I can amend them.
Thank you,
Henry
henrylim said:
It has been said in other forum that the ROM for 2.02 and 2.06 is basically the same. My concurrence is that there is some tweaking of the UI functions of the OS, and the core system modules should be still the same.
regards,
Henry
Click to expand...
Click to collapse
I believe the 2.02ti & 2.06 is not the same
If you check the different between both of them , you will find it is totally diffent in the code(look the same)
due to new version always release so that can cover up or patch up the problems in older version
Customised WM2003 SE Extended ROM - Asia Edition Version 2
ORIGINAL POSTING BY: ZeroXtreme
Edition: ROM 2.06 WWE
RADIO 1.18
Customised ExtROM for Asia 02 by ZeroXtreme
Language: English
Filesize: 11.51 MB
URL Link: http://forum.xda-developers.com/viewtopic.php?t=13795&highlight=wm2003se
Comments:
(a) ROM version is as per used by XDAIIs.
(b) XDAIIs specific files are removed from the installation.
(c) IntelliPad is included
(d) Socket SDIO Wi-fi driver is included
(e) MS ClearType Tuner is included.
(f) IntelliDialer and Intellipad custom skin included as additional zip files.
Genuine English WM2003 SE upgrade - by DCS
ORIGINAL POSTING BY: DCS
Edition: ROM 2.02.t1 WWE
RADIO 1.18
ExtROM 2.06.100a
Language: English
Filesize:
3 files
(a) OperatorUpdate.zip - DCS batch file to update operator ID in .nbf file - 528 bytes
(b) HIMA_WM_2K3_EXTROM.RAR - 2.88MB
(c) Himalaya_WM2003SE_Upgrade.zip - 17.52MB
URL Link: http://forum.xda-developers.com/viewtopic.php?t=13588&start=0
Comments:
(a) Known to have loud speaker bug
02 XDAIIs Asia ROM - with Extended Extended ROM - Dr.Stein
ORIGINAL POSTING BY: [Krueger]Dr.Stein
Edition: Windows Mobile 2003 Second Edition Version 4.21.1088 (Build 14132) with
ROM - 2.06WWE
RADIO 1.18.00
ExtROM Original 02 XDAIIs Asian Extended ROM (2.06.100a)
Language: English
Filesize:
(a) WM2003SE XDA IIx.zip (ROM, Radio) - 17.43MB
(b) Xda IIx Extended Extended ROM.zip - 9.36MB
URL Link:
http://forum.xda-developers.com/viewtopic.php?t=13729&highlight=wm2003se
Comments:
(a) ROM is not original from XDAIIs, only the ExtROM is.
Chinese WM2003SE ROM - 2.20 - Mamaich Version
ORIGINAL POSTING BY: Mamaich
Edition: Chinese ROM 2.20.07CHS
Language: Chinese - half translated to English
Filesize: (18460034 bytes)
URL Link: http://mamaich.kasone.com/imate/chineese_se.rar
Comments:
(a) To install it - extract this archive, enter bootloader on your device and run HimaUpgradeUt
(b) Package does not contain Radio or ExtROM.
(c) Reputed to be most stable version. BT working, WMP 10 mobile inclusive!
Extended ROM Unlocker
ORIGINAL POSTING BY: Twinkle
Edition: Unknown - RAR compressed file
Language: English
Filesize: 15.71KB
URL Link:
http://forum.xda-developers.com/vie...s=0&postorder=asc&highlight=wm2003se&start=25
Comments:
(a) Unrar (using WinRAR in PC desktop) the file and you will see a CAB file.
(b) Copy/Move the Cab file to device folder (through ActiveSync/Explore function)
(c) Go to File Explorer, locate the Cab file and click on it to execute the installation.
(d) After installation, under Programs, you should see a Extrom Tools folder with 4 icons - hide, lock, unhide, unlock.
(e) Enuff said, use unhide, unlock options.
Procedures of Upgrade/Downgrade ROM - Prevent Country ID Err
Description:
DCS posting on how to upgrade/downgrade ROM and prevent Country ID errors.
URL Link: http://forum.xda-developers.com/viewtopic.php?t=12101&highlight=wm2003se
Applications in ExtROM that will kill 02 XDAII-WM2003SE ROM
ORIGINAL POSTING BY: Ken_xda
URL Link:
http://forum.xda-developers.com/viewtopic.php?t=14127&highlight=wm2003se
SG Ext ROM ROM Posting
Hi,
I have created a SG specific Ext ROM, thanks to the guidance from all the wonderful gurus here. To keep the file small, the Auto Config only has SINGTEL, STARHUB and M1 only.
EXEC:\Extended_ROM\TPDisable.exe
CAB: \Extended_ROM\CallerID_wwe.cab
CAB: \Extended_ROM\MIDI561.CAB
CAB: \Extended_ROM\MMS_v2.0.0.13_BA_WWE_O2Asia_0913.CAB
CAB: \Extended_ROM\ClearVue2.4.381WWE_withoutBP_OzUp.sa.CAB
CAB: \Extended_ROM\DialerSkin_Portrait_091104.sa.CAB
CAB: \Extended_ROM\DialerSkin_Landscap_091104.sa.CAB
CAB: \Extended_ROM\After_Sales_Service_091304.sa.CAB
CAB: \Extended_ROM\O2ASIA_WWE_Customization_0923.CAB
CAB: \Extended_ROM\default.sa.CAB
CAB: \Extended_ROM\CW-Album-Association.CAB
CAB: \Extended_ROM\O2Auto.sa.CAB
CAB: \Extended_ROM\Version_BA_112.sa.CAB
CAB: \Extended_ROM\OEM_BA_09240401.sa.CAB
EXEC:\Extended_ROM\SetButtonLock.exe
EXEC:\Extended_ROM\TPEnable.exe
CAB: \Extended_ROM\CameraB10_Hima25_WWE.CAB
CAB: \Extended_ROM\EmailWiz_v1.01.0003_NL_1027.CAB
CAB: \Extended_ROM\cttune.cpl.CAB
CAB: \Extended_ROM\CprogHook.WM2003_2577.CAB
CAB: \Extended_ROM\ExtendedROMUnlocker.CAB
CAB: \Extended_ROM\IntelliPad_TMO_WWE_B12.CAB
CAB: \Extended_ROM\SD_WPA.ARMV4.CAB
CAB: \Extended_ROM\XCPUScalar.arm.CAB
CPY1:\Extended_ROM\cabinstl.exe
CPY2:\Windows\cabinstl.exe
CPY1:\Extended_ROM\CABInstaller
CPY2:\Windows\CABInstaller
CPY1:\Extended_ROM\Autoconfig.txt
CPY2:\Windows\Autoconfig.txt
EXEC:\Windows\Autoconfig.exe
RST: Reset
Download it here:
ftp://xda:[email protected]/Himalaya_SE/Himalaya_SE Extended ROM/2.06.100a SG ExtROM/
Starhub GPRS Configuration
Hi,
The manual configuration guide for Starhub users in Singapore.
RE
Hi henry!
Mine is for S'pore and Malaysia only. How about that?
CAB: \Storage\ExtendedROMUnlocker.arm.CAB
CAB: \Storage\Extended_ROM_viewer.CAB
CAB: \Extended_ROM\CallerID_wwe.cab
CAB: \Extended_ROM\MIDI561.CAB
CAB: \Extended_ROM\MMS_v2.0.0.13_BA_WWE_O2Asia_0913.CAB
CAB: \Storage\IntelliPad_TMO_WWE_B12.CAB
CAB: \Storage\IntelliDialer_T-Mobile_WWE_RC10.CAB
CAB: \Extended_ROM\DialerSkin_Portrait_091104.sa.CAB
CAB: \Extended_ROM\DialerSkin_Landscap_091104.sa.CAB
CAB: \Extended_ROM\After_Sales_Service_091304.sa.CAB
CAB: \Extended_ROM\O2ASIA_WWE_Customization_0923.CAB
CAB: \Extended_ROM\default.sa.CAB
CAB: \Storage\CameraB10_Hima25_WWE.CAB
CAB: \Extended_ROM\CW-Album-Association.CAB
CAB: \Extended_ROM\SD_WPA.ARMV4.CAB
CAB: \Extended_ROM\O2Auto.sa.CAB
CAB: \Extended_ROM\Version_BA_112.sa.CAB
CAB: \Extended_ROM\OEM_BA_09240401.sa.CAB
EXEC:\Extended_ROM\SetButtonLock.exe
CPY1:\Extended_ROM\Autoconfig.txt
CPY2:\Windows\Autoconfig.txt
EXEC:\Windows\Autoconfig.exe
RST: Reset
I find that the followings are not useful:-
TPDisable.exe - Not sure of its purpose. Doesn't affect performance if not present
TPEnable.exe - Not sure of its purpose. Doesn't affect performance if not present
ClearVue2.4.381WWE_withoutBP_OzUp.sa.CAB - I've the entire Suite so no point in installing just a few files
EmailWiz_v1.01.0003_NL_1027.CAB - Dont have this though
cttune.cpl.CAB -Already in my main ROM
XCPUScalar.arm.CAB - Conflicts with my backpack
cabinstl.exe - Not required
CABInstaller - Not required
Re: RE
FOSA said:
Hi henry!
Mine is for S'pore and Malaysia only. How about that?
CAB: \Storage\ExtendedROMUnlocker.arm.CAB
CAB: \Storage\Extended_ROM_viewer.CAB
CAB: \Extended_ROM\CallerID_wwe.cab
CAB: \Extended_ROM\MIDI561.CAB
CAB: \Extended_ROM\MMS_v2.0.0.13_BA_WWE_O2Asia_0913.CAB
CAB: \Storage\IntelliPad_TMO_WWE_B12.CAB
CAB: \Storage\IntelliDialer_T-Mobile_WWE_RC10.CAB
CAB: \Extended_ROM\DialerSkin_Portrait_091104.sa.CAB
CAB: \Extended_ROM\DialerSkin_Landscap_091104.sa.CAB
CAB: \Extended_ROM\After_Sales_Service_091304.sa.CAB
CAB: \Extended_ROM\O2ASIA_WWE_Customization_0923.CAB
CAB: \Extended_ROM\default.sa.CAB
CAB: \Storage\CameraB10_Hima25_WWE.CAB
CAB: \Extended_ROM\CW-Album-Association.CAB
CAB: \Extended_ROM\SD_WPA.ARMV4.CAB
CAB: \Extended_ROM\O2Auto.sa.CAB
CAB: \Extended_ROM\Version_BA_112.sa.CAB
CAB: \Extended_ROM\OEM_BA_09240401.sa.CAB
EXEC:\Extended_ROM\SetButtonLock.exe
CPY1:\Extended_ROM\Autoconfig.txt
CPY2:\Windows\Autoconfig.txt
EXEC:\Windows\Autoconfig.exe
RST: Reset
I find that the followings are not useful:-
TPDisable.exe - Not sure of its purpose. Doesn't affect performance if not present
TPEnable.exe - Not sure of its purpose. Doesn't affect performance if not present
ClearVue2.4.381WWE_withoutBP_OzUp.sa.CAB - I've the entire Suite so no point in installing just a few files
EmailWiz_v1.01.0003_NL_1027.CAB - Dont have this though
cttune.cpl.CAB -Already in my main ROM
XCPUScalar.arm.CAB - Conflicts with my backpack
cabinstl.exe - Not required
CABInstaller - Not required
Click to expand...
Click to collapse
Hi FOSA,
It's ok. I didn't include Malaysia as I am not sure if I can cover all the operators. You see, I don't know the rest very well to know if it's covers Malaysia or other countries.
I suppose that ExtendedROMUnlocker.arm.CAB is good enough? I thought it has all the functions to unhide and unlock the ExtROM folder?
Perhaps you are right that Cabinstaller is not really required. I included XCPUScalar 2.85 as someone reported that it speeds up the soft reset time.
I have other registered software which I did not post here. I am trying to import registry values automatically to tweak the performance of the ROM as well....any ideas?
RE
Hi henry!
S'pore telcos - SingTel, StarHub, M1
Malaysia telcos - Maxis, Celcom, Digi
The ExtendedROMUnlocker.arm.CAB is for unlock/lock only. I think you'll still require the Extended_ROM_viewer.CAB for hide/unhide :roll:
XCPUScalar 2.85 does speed up the performance as long as you don't have a backpack. NO speed up program works on the backpack. You can't even read the files on the backpack when you run the speed up program
Never try importing registry tweaks before so can't help you.
Re: RE
henrylim said:
FOSA said:
Hi henry!
I have other registered software which I did not post here. I am trying to import registry values automatically to tweak the performance of the ROM as well....any ideas?
Click to expand...
Click to collapse
Use a CAB editing software http://www.ocpsoftware.com/products.php?nm=cecabmgr and build your CAB that does the Reg tweaks. When u exec that CAB. All will be done.
Here's an example of mine done to the version.cab and what it does to the registry:
REGEDIT4
Set the Time Display to also display date on the menu bar
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell]
"TBOpt"=dword:00000013
Disable the menu animation (Faster menu)
[HKEY_LOCAL_MACHINE\SYSTEM\GWE\Menu]
"AniType"=dword:0
Enable Low Battery Notification customization through the Sounds & Notification setup
[HKEY_CURRENT_USER\ControlPanel\Notifications\{A877D663-239C-47a7-9304-0D347F580408}]
"Default"="Low battery warning"
Click to expand...
Click to collapse
Here is the example what my version.cab do:
in continuation of the thread(screen shots link below)
http://forum.xda-developers.com/showthread.php?t=521316
this rom is now UC-EXT partially means one can now edit config.txt for cabs installs from extrom ,i would soon be posting UC for storage card
but the problem i am facing is its going to be two roms one which is user customisable thru ext-rom and other which is user customisable thru storage card but not both at same time as this thread says it should
http://forum.xda-developers.com/showthread.php?t=366755
,the changes said i have already made in link1 below but they don't work in real time
LINK :uc-ext-only( http://www.4shared.com/file/109808436/baa60528/nk_online.html
)>>>>TESTED
other links or link will be posted with refinement since dioxda2 suggested something better
new clean rom for those who need no warez (on special request) >>http://forum.xda-developers.com/showthread.php?t=522731
megarom said:
in continuation of the thread(screen shots link below)
http://forum.xda-developers.com/showthread.php?t=521316 .....
Click to expand...
Click to collapse
My UC, I like to show a background picture, so my config.txt in windows folder =
SHOW:\Windows\welcome.bmp
LOCK:Enabled
CAB: \Windows\1.CAB
CAB: "\Storage Card\2.CAB"
CAB: \Extended_rom\3.CAB
LOCKisabled
EXEC:\windows\SDAutoRun.exe
SDAutoRun.exe loads SDconfig.txt from storage Card for futher action .
For your reference only ... ^_^
dioxda2 said:
My UC, I like to show a background picture, so my config.txt in windows folder =
SHOW:\Windows\welcome.bmp
LOCK:Enabled
CAB: \Windows\1.CAB
CAB: "\Storage Card\2.CAB"
CAB: \Extended_rom\3.CAB
LOCKisabled
EXEC:\windows\SDAutoRun.exe
SDAutoRun.exe loads SDconfig.txt from storage Card for futher action .
For your reference only ... ^_^
Click to expand...
Click to collapse
thanks i'm working on it i guess it needs both sdautorun and autorun in windows folder right i mean something like
http://forum.xda-developers.com/showthread.php?t=366333
hmmm
downloading at 4am in the morning... we will see what happens )
FLASHED < clean edition >
Playing with my new toy!!!
)
thanks!!!
hello
how can I add program( phonex 2.2 , wktask , camera album 2.5 qvga ,...) to rom 6.5.x babak000?
vahidmajazi said:
hello
how can I add program( phonex 2.2 , wktask , camera album 2.5 qvga ,...) to rom 6.5.x babak000?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=6547092&postcount=97
thanks mr babak. but what is SDConfig.txt ? is it a program or text?
vahidmajazi said:
thanks mr babak. but what is SDConfig.txt ? is it a program or text?
Click to expand...
Click to collapse
SDConfig.txt is ANSI text file you create on your SD card. It includes path to some CAB or XML files which you want to be installed every time you perform hard reset or flash a new UC capable ROM.
It is a simple SDConfig.txt:
Code:
CAB: \Storage Card\UC\OmapclockKeep_Windows.cab
CAB: \Storage Card\UC\Esmertec Jbed (on SD) Self_Repairable 2008_2_12.cab
CAB: \Storage Card\UC\Esmertec Jbed (on SD) Self Repairable 2009_5_6.cab
RST: Reset
It installs Omapclockkeep and 2 versions of Jbed on my device.
I've made a folder "UC" on my SD card and copied the cab files to it. You can use any path you want.
More information:
http://forum.xda-developers.com/showthread.php?t=366337