i donwloaded something and putted it on my xda II, now it says serial and at the bottom vl.01 i can't use it it's tottaly black no hard reset works, HELP!
euh i really need uyrgent help i can't connect to theactive sync either, i just downloaded the new windows to my device clicked on something and then it went off and only black letters serial and v1.0. it's not my xda so HELP HELP HELP
don't panic...
you are in bootloader mode.
you've probably executed 'enterbl.exe', which is a part of every upgrade.
just connect your device with your pc and run normal upgrade/flash procedure.
buzz
but i can't use active sync anymyore, i unzipped the thing i downloaded and now it got 7 options to choose from but when i click it it opens a install program and in big red letters ROM IMAGE FILE NOT FOUND
it also says
the pocket pc software update cannot locate the ROM image file to update to your pocket pc. Download the correct rom update for your pocket pc and try again and i am a real noob in these thing
did you try a hard reset?
press the on/off button and the softreset button at the same time.
if that wont work
http://forum.xda-developers.com/viewtopic.php?t=18287
try putting that rom on your phone and dont forget to change the country id as described.
good luck friend!
how can i change my country when i have a blanc screen on my pda? and what of the four should i download, i don't speak english so it's double hard to understand
bram said:
how can i change my country when i have a blanc screen on my pda? and what of the four should i download, i don't speak english so it's double hard to understand
Click to expand...
Click to collapse
if you understand my english thats ok.
i completly understand german but im not so good in speaking it.
normaly we can only speak english here but we can make an exeption so you can speak german to me and i will speak english back. OK? or try the translator (www.freetranslation.com)
did you perform the hardreset?
activesync won't work aslong as serial is replaced by the word usb when in the cradle it's ok carry on with the upgrade
try another pc to upgrade!
thats happen to me too.. but...
i also try to install the downloaded items from this website (which is the new windows version 2003 SE), and soon after i start installing it, my desktop computer says "error has occure during the installation process".
:shock: i was very shocked when i see my device completely blank with a word says "USB (on the top)" and "Ver. 1.03 (on the bottom)".. i really panic beacuse my active sync doesn't worked.. but then i start to hard reset my xda then reconnect my device and try to install it several times (bercause sometimes the error message still appear..) after waiting for 5 step of installation which takes abaout 2 hours
tadaaaaaaa now i have an XDA IIs application on my phone...
So in conclusion:
1. do't be panic :wink:
2. try to hard reset ur device
3. reconnect ur device (even if the activesync won't recognized ur device)
4. Install the downloaded files..
5. wait until ur computer says "deleting extended rom" (or something like that)
6. be patient..
7. Pray to GOD..
8. and here you go you got new look for ur beloved xda.
good luck..
oh it works!!!!
there are no words for it and the landscape and the themes, it's BEAUTIFULL!! thanks alot everyone!!!!!!
Similar but not same
Hi I have a similar problem.
While updating my Himalaya device to the XDA2jojo v3.2z5 (not the first time I have installed this version) it has gone completely blackscreen.
I have tried to soft, hard reboot the device. I have also tried to initiate a reinstall with connection error failure. I have tested the batttery and it is okay. No matter what I do I cannot get the device to come back to life.
If I plug the device into the cradle or attach power I get a red light where there is normally the green flashing or orange power light.
Anyone any ideas what this could be.
I have had a similar issue where I would get a blackscreen this problem has occured a few times but I have always managed to get the device back with hard reset.
Similar but not same
Hi I have a similar problem.
While updating my Himalaya device to the XDA2jojo v3.2z5 (not the first time I have installed this version) it has gone completely blackscreen.
I have tried to soft, hard reboot the device. I have also tried to initiate a reinstall with connection error failure. I have tested the batttery and it is okay. No matter what I do I cannot get the device to come back to life.
If I plug the device into the cradle or attach power I get a red light where there is normally the green flashing or orange power light.
Anyone any ideas what this could be.
I have had a similar issue where I would get a blackscreen this problem has occured a few times but I have always managed to get the device back with hard reset.
pleeeeeaaase read/search the forum i know its fustrating when your phone apears to be dead but there are about 100000 topics about this problem and about 100000 times the solution!
greetings OMEGA_ReD
Related
I've done all search BUT still can not solve out my problem.
I tried to upgrade my current ROM (1.03) to 1.60 BUT when upgrade in process; suddenly it said cannot find the device(XDAII).
At that time I took out the machine from cradle and did soft reset. And put it back to cradle to continue upgrade. And the error message still said it still can not find the device.
When I tried to enter into Bootloader mode and USE ROM on SD to restore my original ROM, BUT I tried the method mentioned in some post;
still cannot go to BOOTLOADER mode. On the screen it always said " Serial on the top.
Could anyone help me please?
I have the same problem..
i even tried with Qtek Rom, MDA rom... still not working.
When I turn on the xda II, it only displaying serial on top and v.1 06 at bottom.
tried to run the xdaII upgrade rom with the error :
ERROR 100 : MODEL ID ERROR 1-N-PH-PH-PH
If I try with QTEK and MDA Rom it just does nothing, or it hangs for a long time..
I have tried many times and still not working..
please anyone..
I have the same problem, people, pls help
rom update from sd card
hello,
i did had this also on my old mda..
i fixed it with a rom update on a sd card
good luck
still waiting for a good working 2003 se for my mda2
XDAII stuck in bootloader
mine too , stuck in bootloader with written :
SERIAL V1.06
nothing else ,
what can we do pals ?
no one try to help ????
please ?????
thanks
steve
if you have something written on the screen; such as SERIAL V1.06 then in my opinion you're still okay. do a couple of hard resets, put the unit back on the cradle and double click the upgrade file again. a lot of chaps ran into this same problem but eventually got it going again.
cheers
Thanks Robson..
I did that last nite , but still facing same probs .....
by the way , how to drain my batt ? just take out from the unit for 1 hour ?
and it will automatically drainned ? pls tell me ... thanks before...
Hope this is help...
I have the same problem b4, its frustating to see my XDA become an "expensive brick". After trying everything finally worked. What i did, after u turn on your computer plug in the cradle and also put the XDA into the cradle. Usually the computer didn't recognize it as Pocket PC, so u need to insert the companion CD to ur CDROM. After the computer install the driver, go to folder where ur upgrade file at. Click on HimaUpgradeUt.exe and follow the instruction until finish. DON'T FORGET not to disconnect the power or even take out the XDA headset from the cradle until finish. Good luck guys
Hey everyone,
Can anyone help me fix this big problem.
I downloaded a update ROM from (http://www.xda-developers.com/incoming/rom160wwe/) with the name RUU16006WWE_T-mobile_NL.exe.
After trying to upgrading my device, the proces stopped and told me that there was a connection problem. After this, a tryed to re-connect my device to my computer and to finish the upgrade bud nothing happend and stil nothing happens. My T-mobile MDA is not responding to anything. And i can't connect to ActiveSync. The only thing that my mda shows is this (click on the picture too enlarge).
So ones again. HELP me PLEASSSS..... Send any comments to [email protected]
I hoop my Mda can be fix cause it cost me alot.
Don't panic Your device is in bootloader mode.
Just reset the device, place it back in the cradle and re-run the upgrade. It doesn't require ActiveSync as the upgrade process looks after its own connection.
Make sure the cradle is connected directly into a USB port on your PC and not to a hub. Also make sure the power supply is connected to the cradle.
Thanks for the fast replay bud....
Can you give me a specific step by step to do it the right way? I m not verry good in this kind of things... Thx anywhy
For the moment, hopefully, all you need to do is what I said above. Re-running the upgrade should work OK (although it may depend on what version ROM you had installed already). Give it a try and see what happens.
Wel it keeping telling me that RAPI.dll is missing. Even when i have downloaded RAPI.dll.
I had version 1.60 i think.
Do you no where i can download the version that i had?
Try re-installing Activesync. The latest version is 3.7.1 Build 4034.
You can get it from here: http://www.microsoft.com/downloads/...7c-ca96-48b4-b5d4-f3e047ca5108&DisplayLang=en
OK thx i wil try that...
I have stil a problem.
Where can i download the ROM version 1.60.00WWE? Cause i'm upgrading with 1.66 bud it showed an error
The same error? And at what point does it happen?
Also, please confirm which ROM you are trying to upgrade with, as you have stated two different versions so far.
dcs i'm sorry you're right.
Well, i'm now upgrading from nothing (it showed what ROM i currently have, nothing) to 1.60.06WWE. I download it from http://www.xda-developers.com/incoming/rom160wwe/ as i sad before. It has the name RUU16006WWE_T-mobile_NL.exe
reply for more info.
OK. So what is the current situation? Are you still having a problem? If so, what are the details and exactly when does it occur?
Yes, i still got some problems. One of the many is dat after a few min. or so later, the proces stops and i get an error. I have to do a soft reset and start the proces again. So i did.
Bud now i can't connect anymore. What you see below is what i constantly get to see. And it wil do nothing.
How long have you waited with that message displayed? It can sometimes take a while to get started properly. At that time can you see what is displayed on the device?
The picture that i just showed you, i get that immediatly after pushing next in the beginning field.
When the display (see picture) is shown, the display of my device is blank. There is nothing, no words.
OK. Just be to be sure. Put the device in boot loader mode by pressing and holding the jog button (bottom centre of device) and the power button at the same time and press reset button. This should show the bootloader screen with (in your case) Serial V1.03 displayed. Put the device in the cradle and it should say USB V1.03. Then restart the upgrade. When the initial screen displays on the PC click next and the screen you posted above will display while the PC handshakes with the device. Give this some time to complete. If all is well it will progress to the screen showing the versions, etc. and allow upgrade. Click upgrade and again it will show the screen you posted above for a while then (hopefully) continue.
I'm now bizzy with what you sad. 10min. so far.
10 Minutes with the display you posted above? If so then that is too long
Yes exacly... TOO long... i don't no what to do now.. anyways. I'm going to sleep now. I wanna thank you for everything.. I'll hope to speek too you tomorrow. Bye bye
OK. Sorry we couldn't get it sorted tonight . If I think of anything else I'll let you know.
Another thought came to me. Some people who have had this sort of problem found that using a different USB port or even another PC solved the problem.
Guys,
I have been trying to find solution on forum, but it seems it will not be so easy ... My MDA1 shows only Wilkommen bei TMobile and soft version G32S54, R3.23.00, 3.16.45 and that is all It does not response on power or anything - it simply shows me Wilkommen or not (if power is unplugged and battery empty). You may see how it looks here: http://www.jester.it.pl/mda/MDA1.jpg I have only USB cable - so if there is any chance to solve this problem having only this cable - please show me the way.
What is the most important - my Active Sync does not see connection ((
Help ...
TIA
B
I think your ROM is corrupt. Try reflashing.
Instructions can be found here:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Stefan
Hi there,
Thanks for your help - right now I need to find appriopiate ROM Image and it should work...
BR,
B
It seems that I do not have ROM file ;((( and one I found does not work....
Any suggestions?
I will try to cook sth. and let you know
a problem I had
When I first tried to image my device, the usb flash mode using XDA tools didn't work. I think this was because I was using windows vista. Anyway this forced me to use the direct sd flash method, and thus I didn't get the instructions to cold reset my device after the flash, which does seem to make a difference. Have you tried that?
<edit>What do you mean it does not work? What happened exactly when you tried?</edit>
OK - first time did not work, because Hard reset did not worked My mistake ... after reset it seems fine - I made some cooking and I have nice ROM right now but... After another reset and after second upload Boot appears and Wallaby starts making tests. After last test made Diagnostics screen appears and to be honest I do not know what to do Hard reset just shuts down MDA and I cannot switch it on - I can start from the same begining - tests etc. I know I am really close to solve that ... and we will see.
Guys, thanks for your help
My dopod is on ipl/spl 2.20
while trying to update to the latest PV 4.0.0.0.6 Touch, i encountered an error..
Fine, reset the device, went to bootloader, started the PV_Temp upgrade file for my G3 dopod.
halfway, the update fails and says the NBF file cannot be used.
i've tried every other NVID rom and it is the same..
so now i'm stuck in the bootloader screeen and i can't do anything
Please try the search button in this forum!!! And don't worry it's not bricked;-)
sayjeng said:
My dopod is on ipl/spl 2.20
while trying to update to the latest PV 4.0.0.0.6 Touch, i encountered an error..
Fine, reset the device, went to bootloader, started the PV_Temp upgrade file for my G3 dopod.
halfway, the update fails and says the NBF file cannot be used.
i've tried every other NVID rom and it is the same..
so now i'm stuck in the bootloader screeen and i can't do anything
Click to expand...
Click to collapse
check your .NET Framework and see if you have the 2.0 version installed. Reboot your pc and start again. We always experience these hiccoughs.
i've tried the search..
seriously saying, its quite hard to find what i want..
i seem to be able to flash the PV_TEMP ROM, it says on my computer its successful but my PDA just goes back to bootloader.
anyway, i'm installing .Net framework 2.0... will see how that goes..
still doesn't work..
RUU says its congratulations...
PDA goes back to bootloader
i cna flash jester's rom, i can flash PV_temps rom..
but all i get is the bootloader screen after that..
can't flash the NVID thats from the upgrade guide... it just says wrong NBF file..
wonder how much will it cost for me to send it to service center to replace the whole flash chip
new problem, now i can't do anything at all cause i think my batt is dead..
how can i recharge it ?
sayjeng said:
new problem, now i can't do anything at all cause i think my batt is dead..
how can i recharge it ?
Click to expand...
Click to collapse
so you know now what is the problem!
recharge it by connecting to a PC with USB and wait wait wait and hope for the best. Try recharging it by what ever means you can do. If you said, you are successful in getting PVtemp, then, try installing battery_status.cab (find it search it by google or whatever) and watch the battery_status line on the front page and wait for a + sign before the 100mA at the right bottom line to appear.
Wait till it is full, then redo step 2 again. I'm sure you can get over without getting the machine to the manufacturer for repair.
no no
the first problem still stands
i'm still stuck at bootloader..
but now i can't flash anything cause my batt is dead..
so i've got 2 problems now
hello all,
sayjeng, I got the same problem last week.
I couldn't use any RUU rom because of the corrupted nbf file.
The PV_TEMP rom worked but I was stuck on boot loader screen too...
I tried many times and with some random hard resets... Eventually, the fourth time , WM5 started...
My advice are :
- charge your battery by any means like SeaPea said
- reboot your desktop computer
- remove your (fully charged) battery from your phone for some seconds and put it back...
Really, I may have been lucky that time...
I just wanted to post here to say that I sympathize...
Good luck!
will give it a try tomorrow..
its past 1am now and i need to be up early tomorrow..
if it doesn't, really have to make a trip to service center..
wonder what should i tell them then..
oh, forgot to mention
i can't hard reset..
i can get to the part where it says 'Press Send to restore factory default, Other keys to quit'
when i press Send, it says Format FAT Partition and followed by Format is Failed
then i get a flash for 1 sec of the vendor boot screen which is all green, and its back to bootloader
sayjeng said:
oh, forgot to mention
i can't hard reset..
i can get to the part where it says 'Press Send to restore factory default, Other keys to quit'
when i press Send, it says Format FAT Partition and followed by Format is Failed
then i get a flash for 1 sec of the vendor boot screen which is all green, and its back to bootloader
Click to expand...
Click to collapse
me too....any progress?
Jow ... flash your rom from dopod!
If your Radio Rom is crashed ... it stuck at Bootscreen too! After that it must run! it fix partition errors too.
ROm from dopod is 2.15..
my prophet is now on 2.20...
i can't flash it... i haven't been able to find a vendor rom wiht 2.20..
does anyone have any ? Qtek maybe ?
something to get my prophet running...
cause i did try in my attempt to get my prophet back by flashing the Radio ROM.. and it fails.. maybe thats why i can't boot my prophet
tried almost every rom..
used almost every RUU
anyone got any RUU that might help ?
or any suggestions ? thinking of throwing the towel and just pass it to dopod for them to handle....
worst case, change ROM chip
finally
I got this to work using the guide - BUT:
Windows XP SP2 English was the key for me.
I used VMWare to do step 1 of flashing (NVID)
then step 2 of flashing I did on a separate PC.
Worked after so many different attempts
i am running on XP sp2 english.. not using vista..
problem is, i can't even hard reset my phone.. it just says Format is Failed.
but my phone seems fine and still responds to my plugging the USB in and reseting....
Hi sayjeng
The same problem with my imate jamin too..
Whatever you said in you posts is an exact recall of my case.
Now it makes two of us
Waiting to see if someone can come up with a solution.
IPL/SPL at 2.20
Frequent automatic disconnection from activesync.
No means to charge the battery which i think is almost dead.
Tried the Dopod rom,for no avail.
The list goes on and on just like yours.
help..Anyone..?
Hi all
I know that there's millions of threads about this but believe me I've read them all and nothing seems to work for me.
I'm trying to upload a new room in my prophet but as soon as the mobile reboot nothing else happens. I've got a black screen and nothing else.
I've tried all the key combinations to reach the bootloader I even tried to run bootloader.exe directly from the mobile but nothing.
At this moment I'm pretty stuck with the room I've got and I really want to change it , any advice ?
I've tried:
camera+softreset
Commanager+softreset
in both cases I kept press the camera and commanager botton .
I've also tried other combination but without the behaviour expected.
Thanks in advance
Look forward your reply
All the best
Pedro
Turn the device on, whilst it is booting try holding the comm manager button and do a soft reset.
Try performing a hard reset (hold BOTH the camera and the comm manager buttons and soft reset), to see if you get text displayed. Don't bother actually doing one.
What ROM do you have at the moment? Have you tried unlocking (sim) your device? Have you used hardSPL or SoftSPL? What numbers are shown after the device boots up (red text in the top left of the screen)?
I´m using Shadow_My_Edition_2_no_DualSIM.
I've used HardSPL
ipl 2.9.000.1
spl 2.g4.4pda
gsm 02.47.21
os 5.2.20.21
I've started facing this issue only after this room has been uploaded, other odd thing that my prophet is doing is that the prophet only reboot if it is connected to the usb port in my laptop or to the charger directly, otherwise it enters in a continuous reboot.
I'm trying to get rid of this room but I'm not able to ....
maybe solution
http://forum.xda-developers.com/showthread.php?t=292667
try my solution for that kind of problems connect it to charger as described and then do a flash of a basic rom.
possibly u flashed a wong rom
Hi
That was a great solution, fortunately I there was no need to get so far .
Guess what I've changed the USB cable and the flashing procedure went as expected.
It´s kind of strange the behavior that my was getting but now I'm track again , ready to flash and test some rooms.
Thanks all for your replies.
BR
Pedro