If you have struggled to enable MMS on you XDA I then read further...
My XDA
OS: PPC2002
ROM: 3.20.06 ENG
ROM DATE: 07/30/03
RADIO: 4.21.00
Service Provider: OPTUS (Australia)
Software you need: EZWAP ver:2.5 (search google for a download)
Other things before starting: I am under the impression that you need to ask your service provider to enable mms on yor account before it will work? I got my sim-card in Feb 2004, and never asked optus to enable mms on my device (i only asked them for their server settings - which they couldnt give me cuz they suck) Mine works, so i'm assuming its enabled by default. Just ask them anyways.
And finally before we start: This xda is not (to my knowledge) cooked in any way. It is just as i got it.
I've tested this 3 times now, and it worked perfectly every time. Since i'm using optus (prepaid) and i couldnt find ANY details anywhere on the net for optus network MMS settings, i'm posting it here for all who are just as fed up with the lame-ass customer service as i am.
(This is quite a long post, but im taking it hell into detail here. Another thing.. its written in dumbass language so if i say something like "click OK (top right of screen)" then just think of all the newbies )
Network Settings for GPRS
TODAY SCREEN
start > settings > 'connections' tab > "Connections"
(i'm assuming you did an auto-config when you first started the unit)
Click MODIFY
Click Optus GPRS...
You should have the following details:
name: Optus GPRS Internet
modem: Cellular Line (GPRS)
baud rate: 19200
click ADVANCED
no checkboxes should be selected, and 'use server-assigned IP address' should be selected.
click NAME SERVERS
select 'use server-assigned addresses'
click OK (top right)
click NEXT
access point name: mms (if i remember correctly this used to be set to 'internet'
click FINISH
click PROXY SETTINGS
only select checkbox 'This network connects to the Internet'
click OK (top right)
(you are taken back to CONNECTIONS main screen)
click OK again
close the window and go back to today screen
------------------------
EZWAP Setup
start > programs > "EzWAP v2"
click TOOLS
select OPTIONS
GENERAL tab (tabs at bottom of screen)
Connection should be: "Optus GPRS Internet"
"Connect Automatically" checkbox should be selected.
Home Page: file://windows/ezos2.wmlc
"break line after images.." checkbox should be selected.
CONNECTION tab
select the GATEWAY radio button
Address: 61.88.190.10 Port: 9201
NO CHECKBOXES SHOULD BE SELECTED HERE - this was a big problem earlier on
Connection Timeout: 50
Retries: 5 x timeout: 100
PUSH tab
"Enable Push" should be selected.
Address is left blank.
Port: 2948
"Connectionless Push Gateway" should be selected.
"WTLS secured connection" should NOT be selected.
HISTORY/CACHE tab
No changes.
IDENTIFICATION tab
"allow client identifier to be sent through headers" should be selected.
nothing in textbox
"allow geographical location..." should be selected.
MMS tab
Message Server: http://mmsc.optus.com.au:8002
sender address type: "Phone Number"
Sender Address: {your phone number in normal form... e.g. 0431405405 NOT +61431405405}
MMS OPTIONS tab
Message Expiry: Max
"Delivery report" should be selected.
"Read report" and "hide sender" should NOT be selected.
-------------------------------
This should work now when you send or receive MMS messages!!! yayy!
Here are a few problems i've picked up; they might happen to you and then again might not... if anyone has a solution for them please let me know
1) When you get a mms message, it will display a notification on your screen. When i choose to 'get now' it just does nothing. I have to go to my inbox and the message is there, then select to download. Not a big problem, but kinda irritating? I think someone else in these forums had the same problem.
2) Whenever i used my phone on my XDA it doesnt allow me to 'close' the phone-application. thus its always running in the background then. It's like i'm just swapping between the today screen and phone. ANyways, the problem is this:
the MMS works as long as i havent used the phone. It seems that the phone application (or connection or whatever) is conflicting with the EzWAP software, or the GPRS connection or something. The only way i can get MMS to work after using the phone is by doing soft-reset. Then everything works fine. I'm guessing that if your phone is closing properly then you wouldnt have this problem at all.
If this has happened to anyone (the phone not closing) and you have fixed it please let us know!
3) This is unrelated to MMS.
I cant do a soft-reset when my SD card (1GB Ridata 66X) is inside the unit. When i do this, i just get a blank white screen. When i take the card out and soft-reset then it works fine. Any ideas?
Thats it, happy MMS'ing!!!
The cost (for anyone interested) of sending a mms message to myself and receiving it was AU$0.60 in total. This is on the OPTUS network, using prepaid.
ok, if this even helped ONE person then i'm happy
His Lordship JayDA I
yep one it is me
well thanks for your so precise explanation
cos of it i manage to config my access to vodafone.pt and send a mms
so THANKs thank you thanks
some problems still but.....time is on my side lol
thanks aggain
need EZWap 2.5
Hi, can anyone please send me the complete send the link of ezwap 2.5, i dont seem to find any evaluation version of it.
I am in a desperate need of MMS on my Qtek 1010.
Please help me
Thanking you in advance
Related
HI there
i have an problem with my GPRS on XDA 2,
the problem is i can't access internet on my XDA2. i have the following setting
APN: payandgo.o2.co.uk
username: payandgo
password: password
wap field setting in proxy server 193.113.200.195 @ 9201 port
if i open pda.o2.co.uk wesite in IE, it dispaly every thing very fast aprox @ 45KB/Sec
but if i try to open any other site like yahoo, hotmail, google the speed for GPRS drop to 1KB/Sec. and page can't be dispaled message comes up.
I have PAYG O2 SIM card.
i spoke to o2 Customer services to enable my "Enable Web" services but they told me that they can't do it because i am using PAYG .
IS there any other way to get around this problem i mean without going on contarct with O2. and using the same PAYG sim.
Kind Regards
Gugi
Sorry mate there's nothing that can be done as the Mobile Web APN isn't available for PaynGo
bydandie said:
Sorry mate there's nothing that can be done as the Mobile Web APN isn't available for PaynGo
Click to expand...
Click to collapse
hi all ppl
i found this in this forum
OK, full instructions:
* I recommend deleting any existing GPRS settings you have under the work connection settings before entering these to avoid confusion *
1. Go to Start -> Settings -> Connections Tab -> Connections.
2. You'll see 2 sets of option links. 'My ISP' and 'Work'. Under the work links, choose 'Add a new modem connection'.
3. Name for connection: o2 gprs. Modem: Cellular Line (GPRS). Tap Next.
4. Access Point Name: payandgo.o2.co.uk
5. Username: payandgo
6. Password: password
7. Tap Finish.
8. Back in the connections settings screen, tap 'Edit My Proxy Server'.
9. Tick 'This network connects to the Internet' and 'This network uses a proxy server to connect to the Internet'.
10. In the proxy server box enter: 193.113.200.195
11. Tap OK.
12. Back in the connections settings screen, tap the Advanced tab.
13. Tap 'Select Networks'
14. In both drop down boxes choose 'Work' as the connection. Tap OK.
15. Tap OK again.
16. You are now ready to surf o2 pay as you go gprs full internet.
Sorry to be the bearer of bad news; these instructions were great a few weeks ago, but O2, for reasons best known to themselves, have clocked PAYG access to GPRS
hi there
these settings still works for me
i use in my proxy server setting port 8080 instead of 80
regards
Gugi
I've managed to get WAP over GPRS working now - these intructions from O2 are what I followed - except that I first deleted teh existing connection (Right-tap on it and select delete):
Xda II GPRS WAP manual settings Pre-pay
It is not possible to select the 'Prepaid' option within 'My Xda' Connections in the O2 Active UI on the XdaII - 'Postpaid' is selected as default and cannot be changed.
To use the XdaII with an O2 Prepay SIM then the WAP settings will need to be changed manually - note that it will not be necessary to carry out a hard (full) reset in order to complete this.
IMPORTANT - once the WAP settings have been changed, if a hard reset is carried out at some future point, then the settings will automatically be re-configured back to Postpaid and they will need to be manually changed again..
XdaII Manual Setup - GPRS WAP (Prepay)
Tap Start > Settings
Tap 'Connections' tab
Tap 'Connections' icon
Under 'My Work Network' tap 'Manage existing connections'
Tap 'Edit'
The 'Select a modem:' drop-down box should be set to 'Cellular Line (GPRS)'
Tap 'Next'
Access Point Name: payandgo.o2.co.uk
Tap 'Next'
Usernameayandgo
Password: password
Domain: leave blank
Tap 'Advanced'
On the 'TCP/IP' tab, only 'Use server-assigned IP address' should be selected
Tap the 'Servers' tab
Only 'Use server-assigned addresses' should be selected
Tap 'OK'
Tap 'Finish'
Tap 'Proxy Settings' tab (*Note, the soft keyboard may be hiding this tab - tap the keyboard icon at bottom right to clear this away)
Ensure that 'This network connects to the Internet' box is ticked
Ensure that 'This network uses a proxy server to connect to the Internet' box is ticked
Tap 'Advanced'
In the 'WAP' field (Server) enter: 193.113.200.195
In the field to the right of this (Port) enter: 9201
Tap 'OK' and exit
Once you have installed the settings into your handset and saved them, please switch off your handset and switch it back on. This will activate the settings for you.
you can still have full internet on o2 p&g, mines working fine
so you can actually use Interent Explorer to reach html pages?
Can you check out your settings and see how they differ from what's in my last post? Then I'll see if I can get this working too...
Just a quick not here. Try changing the http port to 8080 instead of the default 80 (thanks to gugi_sat). All works perfectly for me now Just need MMS now.
Thanks for the help guys
Hi MamaKin
here are the MMS setting for O2 UK PAYG
Start > Messaging > Tools > MMS Settings
Connect Via: My Work Network (this links to the GPRS WAP settings)
Tick Retrieve Messages Immediately
Tick OK to download when roaming
Tick Save sent messages
Attempes before give up: 3
Photo Resolution: Original
Tap the Servers tab
Tap O2UK
Server Name: O2UK
Gateway: 193.113.200.195
Port Number: 9201
Server Address: http://mmsc.mms.o2.co.uk:8002
Sending Size Limitations: 100K
Tap OK twice to exit
gugi_sat said:
hi there
these settings still works for me
i use in my proxy server setting port 8080 instead of 80
regards
Gugi
Click to expand...
Click to collapse
8080 in the WAP port?
or HTTP?
in http
regards
GUGI
does 193.113.200.195 go in HTTP as well as WAP? because my box is empty.
sorry i was in hurry before
ok yeah as in my setting
HTTP: 193.113.200.195 PORT : 8080
WAP: 193.113.200.195 PORT: 9201
SecureWAP : EMPTY
Socks: 193.113.200.195 PORT: 1080
Type : Socks 4 setected
and the rest is same as explained before
hope this will help
Regards
Gugi
It's working now... Thanks.
One other thing (that isn't shown above)
Start > Settings > Connections Tab
Connections icon > Advanced Tab
Select Networks...
In Network Management,
I had to change both boxes to 'My Work Network'
Mine was set to My ISP and didn't work.
Thanks again for your help.
* I recommend deleting any existing GPRS settings you have under the work connection settings before entering these to avoid confusion *
as written above in my post
any way thats good that yr machine works
Regards
Gugi
o2 UK PAYG gprs settings for XDA IIi
Hi all,
I am just wondering if the gprs settings for XDA II works for XDA IIi. I tried it, it's not working for me...Gugi_sat, I need your intelligent brain now plzzzzzz :idea:
Cephas007
There is a God watching over us!!!
hi Cephas
i have only xda2 so i can't help you o this sorry about that, but u can try making a new connection deleting the previous ones (#BUT MAKE SURE YOU TAKE ALL THE BACKUP OR WRITE DOWN ALL THE SETTING BEFORE YOU DO DELETE ANY SETTING)
new connection shold be "work connection".
and follow the instructios explained above.
all the best and very soory thats all i can say ....
Regards
Gugi
Im still a little lost.
My Internet Explorer only works on Work settings, but
My email only works on My ISP settings
Thats it
i am not able to access my email and msn with this connection but i can accessing internet only . I think i mentioned that earlier here or some where in this forum any way good luck with this sort of free connection because i have no credit on my phone and i am using this for month i mean it looks free to me rest i dono.
regards
Gugi
Can any one help me do settings for My Siemens SX-56 Settings for Ufone or Telenor (PAKISTAN) Settings. I have tried to do the settings by accessing the web pages of the said companies but its General Settings and i seem to get lost with the complicated way the settings provided by Ufone.
I also need to know how to send mms which i could not figure out at all.
thx
aamer sheikh
I can help you with the GPRS and MMS settings for Ufone. No clue about telenor.
For GPRS do the following: (I'm assuming your device has WM2003SE)
- Start > Settings
- Select the Connections tab and click on the Connections Icon
- Click on the Advanced Tab
- Click on the Select Networks button
- On the Network Management screen, under the first dropdown list (for
"programs that automatically connect to the internet should connect using",
click the New button.
- On the next screen, enter an ISP name, e.g. UfoneGRPS
- No other settings needed, save these settings and clic on the Tasks Tab
- Now here you will see your UfoneGPRS connection listed with a bunch of
options
- Click on the Add a new modem connection option under UfoneGPRS
- Enter a name for your connection e.g. UfoneInternet
- Select CellularLine)GPRS) in the Select a modem setting, click next
- Enter ufone.plinternet in the Access Point Name box
- Click Next. No further entries needed, click Finish and save settings.
Your connection is now set. Click ok to get all the way back, on the today screen click on the signal strength icon to display the connection bubble. It should display your newly made connection name with a "connect GPRS" lick. Click on it and you should be connected to the Ufone GPRS network in a few seconds.
Good luck. Lemme know how it goes.
p.s. before you can use GPRS and MMS you have to call the customer services at Ufone and ask them to activate both of these services for you. It takes some time for this to happen e.g. you call them today and it will start working perhaps the next day.
For MMS do the following:
Again like the above you have to create a new connection by first creating a connection name and then a new modem connection for it. Lets say you called the connection "UfoneMMS"
These are the settings for that modem connection for UfoneMMS
- Connection Name: Ufone.mms
- AccessPoint: ufone.plmms
- Everything else: default
After this, go to pocket outlook, in the settings, do the following:
Create a Message Server as folows:
Server:
Name: UfoneMsgServer
Gateway: 172.16.13.27
Port: 9201
Address: http://www.ufonemms.com:80/
xxxxxxxx=9999999
(the xxxxxxxx and 99999999 are your MMS account username and mailbox ID that Ufone creates for you and you have to obtain it form their customer services peeps).
Then in the main settings, set the following parameters:
- Connect via: Here you select your connection name e.g. Ufone.mms
- Connect to Server: UfoneMsgServer (the server you just defined)
One last thing, I dont know how important this is but they always say to do it..
In the Slect Networks screen (where you first defined your connection), click on the Dialing Rules buttons and click "use dialing rules". Then setup new Dialing rules for say, Mobile as follows:
Dialing rules: Dialing patterns
Local: G
L.D. : G
Intl.: G
You should be all set up.
I have heard that recenty they changed some MMS related configuration so you might wanna chekc up with them to see if all the above parameters for MMS are still valid. I had them all setup and working perfectly for a while... but I havent used MMS in a long time so I dont know whats been happening recently.
If you have any trouble, lemme know. Everything should work, its working on my machine.
Access point is ufone.plinternet for lahore connections and
ufone.piinternet for islamabad connections and I think it differs from city to city be sure to check with ufone
APN
What is the Access Point Name for Multan?
please help me.
humayunl said:
I can help you with the GPRS and MMS settings for Ufone. No clue about telenor.
Snip, snip.....
If you have any trouble, lemme know. Everything should work, its working on my machine.
Click to expand...
Click to collapse
plz tell me the mms setting for wm6.1
im unable to see the mms folder in wm6.1 like in wm5.0 ??? even cant see server setting for mms in options of messaging
shanalikhan said:
plz tell me the mms setting for wm6.1
im unable to see the mms folder in wm6.1 like in wm5.0 ??? even cant see server setting for mms in options of messaging
Click to expand...
Click to collapse
you should only install this application, you do not have to bother setting up GPRS manually....
humayunl said:
I can help you with the GPRS and MMS settings for Ufone. No clue about telenor.
For GPRS do the following: (I'm assuming your device has WM2003SE)
- Start > Settings
- Select the Connections tab and click on the Connections Icon
- Click on the Advanced Tab
- Click on the Select Networks button
- On the Network Management screen, under the first dropdown list (for
"programs that automatically connect to the internet should connect using",
click the New button.
- On the next screen, enter an ISP name, e.g. UfoneGRPS
- No other settings needed, save these settings and clic on the Tasks Tab
- Now here you will see your UfoneGPRS connection listed with a bunch of
options
- Click on the Add a new modem connection option under UfoneGPRS
- Enter a name for your connection e.g. UfoneInternet
- Select CellularLine)GPRS) in the Select a modem setting, click next
- Enter ufone.plinternet in the Access Point Name box
- Click Next. No further entries needed, click Finish and save settings.
Your connection is now set. Click ok to get all the way back, on the today screen click on the signal strength icon to display the connection bubble. It should display your newly made connection name with a "connect GPRS" lick. Click on it and you should be connected to the Ufone GPRS network in a few seconds.
Good luck. Lemme know how it goes.
p.s. before you can use GPRS and MMS you have to call the customer services at Ufone and ask them to activate both of these services for you. It takes some time for this to happen e.g. you call them today and it will start working perhaps the next day.
For MMS do the following:
Again like the above you have to create a new connection by first creating a connection name and then a new modem connection for it. Lets say you called the connection "UfoneMMS"
These are the settings for that modem connection for UfoneMMS
- Connection Name: Ufone.mms
- AccessPoint: ufone.plmms
- Everything else: default
After this, go to pocket outlook, in the settings, do the following:
Create a Message Server as folows:
Server:
Name: UfoneMsgServer
Gateway: 172.16.13.27
Port: 9201
Address: http://www.ufonemms.com:80/
xxxxxxxx=9999999
(the xxxxxxxx and 99999999 are your MMS account username and mailbox ID that Ufone creates for you and you have to obtain it form their customer services peeps).
Then in the main settings, set the following parameters:
- Connect via: Here you select your connection name e.g. Ufone.mms
- Connect to Server: UfoneMsgServer (the server you just defined)
One last thing, I dont know how important this is but they always say to do it..
In the Slect Networks screen (where you first defined your connection), click on the Dialing Rules buttons and click "use dialing rules". Then setup new Dialing rules for say, Mobile as follows:
Dialing rules: Dialing patterns
Local: G
L.D. : G
Intl.: G
You should be all set up.
I have heard that recenty they changed some MMS related configuration so you might wanna chekc up with them to see if all the above parameters for MMS are still valid. I had them all setup and working perfectly for a while... but I havent used MMS in a long time so I dont know whats been happening recently.
If you have any trouble, lemme know. Everything should work, its working on my machine.
Click to expand...
Click to collapse
AWSUMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
Keep Going with your Advises
its so simple and it works
shanalikhan said:
plz tell me the mms setting for wm6.1
im unable to see the mms folder in wm6.1 like in wm5.0 ??? even cant see server setting for mms in options of messaging
Click to expand...
Click to collapse
Try to Hook with Windows Mobile 6.5 standard or professional
then its simple to proceed
and if no, make a hard reset with your phone to re gain the factory settings and then try
BDW, Which Phone you have...?
i dont know if this is the right section for this question so MODS/ADMIN/GODS move to the right place here is my question first of all I've unlocked flashed/reflashed my cingular with pof's software so thanks to that, but I want to know how to set-up my Cingular 8525 on TMOBILE to send MMS what are the correct settings?any guide?I tried the MDA setting but cant get it to work...so I really need help...Thanks...
25 views 0 replies I'll be patient and wait...
iseedeadpeople said:
25 views 0 replies I'll be patient and wait...
Click to expand...
Click to collapse
Maybe since this forum is for upgrading. I also noticed your post at HOFO. Have you called TMO and asked? I took a quick look at TMO site and it wasnt much help. The "settings" servers/ports from the MDA will work, what is the specific issue. Is there no place to enter the servers or does it look correct and it just doesn't send or receive?
well all the fields to key-in is in there only problem is it has 2 options when im asked MyISP or My Network, dont know where to add modem there and also on the MMS setting there is a The WAP and Secure WAP?so which is which?anybody here using t-mobile MMS with cingular 8525
If your in the uk, you can sign onto my tmobile and they will send the settings to your phone.
To add a new modem you have to go to start>settings>connections> Add a new modem connection
You should specify in the mms settings to use the TMO connection
Here are the steps and settings:
Step 1. Setup GPRS connection for T-Mobile network:
Start > Settings > Connections (tab) > Connections > Advanced (tab) > Select Networks > New...
Enter the name for the profile (e.g. T-Mobile), then go to "Modem" tab and click "New...", enter name for the connection (e.g. T-Mobile Data), choose "Cellular line (GPRS, 3G)" in the drop-down menu, click "Next", the access point should be "wap.voicestream.com", click "Next", leave all fields blank on this page, click "Finish". Now go to "Proxy Settings" tab and select "This network connects to the Internet".
**Mod edit**
I removed your section on how to possibly get free internet from your provider. This board is not for the discussion warez, or anything closely related. If you want to share that type of info do it in private
Click "Ok" all the way out.
Step 2. Setup MMS:
Start > Programs > Messaging > Menu > Tools > Options... > MMS > Servers (tab) > New
Server name: (you name it)
Gateway: 216.155.165.50
Port Number: 9210
Server address: http://216.155.174.84/servlets/mms
Connect via: (the connection you created in step 1)
Sending size limitation: 300K
WAP Version: WAP 1.2
Click "Ok", set this new entry as default (with a red arrow on the icon).
You are all set.
p.s. I can get free internet on my account but not my friends', don't know why, need to have T-MobileWeb service ($5.99) to make it work on their account, eventhough still cheaper than Total Internet service ($29.99)
I never try WAP 2.0 on MMS settings, 1.2 works, so... (port 9210 is default for WAP 1.2, when choosing WAP 2.0 it will change to 8799)
hope this helps
iseedeadpeople said:
only problem is it has 2 options when im asked MyISP or My Network
Click to expand...
Click to collapse
<<<<<<<<on this part which one should i choose? MyISP or My Network when adding the modem..Thanks..
iseedeadpeople said:
<<<<<<<<on this part which one should i choose? MyISP or My Network when adding the modem..Thanks..
Click to expand...
Click to collapse
Either MyISP or My Network are the name of the profiles.
Anyway, I'll suggest leave "MyISP" alone and create a new profile insted of modify it. (probably modify it works too) It seems like some features are not open to that one.
Afterwards, when selecting network, the new profile go to the upper slot. and the lower slot probably be "My Work Network".
Finally got a custom ROM on my phone, NFSFANs, and I must say I really like it, but for some reason I am unable to MMS. I looked through all the places i thought would be obvious settings, but i cant find anything
anyone else experience this?
same issue
i have been haveing the same issue on my touch pro, i dont see were to fix it when i try to send it starts to then says unable to send does any one know of a fix for this, i am useing Energy.HERMAN.23518.StandardM2.5_27.
use this
use this cab, it appears that messaging is still not ready for the new 2011 builds...
This will disable the HTC Messaging and take you back to the winmo messaging.
You also need the second cab to take your phone back to what sense2.1 used and it should work...
There is also a third file attached, that one you install by itself, you have to go to the "all messages" then you have to go to the menu>options>settings and put your settings.
Search on it a little more, If I find the full information again I will let you know. I read on it last night and got my wifes touch pro2 to mms again so this should work for you too...
Maybesz?
I beleive this may be what your after, these settings are carrier specfic in order to get MMS working
HKLM\Software\Arcsoft\Arcsoft MMS UA\Config\MM1 Default Setting Cricket MMS and Change WAP default Port 1&2 to 8080 and WAP Default Time Out to 10000
HKLM\Software\Arcsoft\Arcsoft MMS UA\Config\MM1\MMSCSetting\Cricket MMS Ensure Gateway Port is 8080 ISP is Cricket MMS, MmscURI is set to http://mms.mycricket.com/servlets/mms , Name is Cricket MMS, Ensure the next 4 settings WAP1RecvDefault Size, WAP1Send WAP2 Recv and WAP2 Send are set to 1024000 WAPType to 1 (WAPType to 1 Ensures WAP 2.0)
WspHeader Accept: application/vnd.wap.multipart.related
X-Cricket-MDN this is your 10digit cell number (this might say X-Verizon or X-Sprint Change the value name to X-Cricket-MDN) Value Data 555-555-5555 < of course put in your own phone number no dashes.
Under UI\Domain http://mms.mycricket.com/servlets/mms
Under UI\SizeLimit WAP1RecvLimit 1,2,3 set everything on that page (12 settings in all) 1024000 (this is part of your 1000K send and receive limit)
HKLM /software/arcsoft mms ua/config/UI
find EnableServerEdit and change it from 0 to 1
HKCU\Software\Microsoft\Windows\CurrentVersion\Int ernet Settings Where it says Connections, Delete that entire string Hold down stylus on Connections circle it and delete it, This is what keeps the MMS from sending. Bad thing is every time you open explorer it re-writes this registry. To solve that many of us have just used something else besides Explorer. Like Opera, Firefox Mobile or Skyfire.
You can still use these browsers without writing the Connections Value. If you don’t want to use anything but Explorer, you are going to have to go into this registry file and delete the Connections string every time to send MMS or until someone comes up with a registry hack to Auto delete this value every time you close IE …Close Regedit.
Now go to your messages and click menu/MMS options and then click server and click add new. Add new or if you already have one called something else just click it and click edit...you need to change these settings to
Server Name Cricket
Gateway leave blank
Port Number 8080
Server address http://mms.mycricket.com/servlets/mms
Connect Via Cricket MMS
Sending limit (should be 1024000 if you changed these settings correctly in regedit)
Wap version Wap 2.0 (Wap 2.0 should be pre selected, if it is don’t touch it. If it keeps reverting back to 1.2 when you click close? Go back into regedit and select WapType 1 as mentioned previously, this forces it into WAP 2.0 without it MMS won’t work.) Now if you have more than 1 select the cricket one you just configured and hit set as default then go back to HKLM\Software\Arcsoft\Arcsoft MMS UA\Config\MM1\MMSCSetting\Cricket MMS and delete the other configuration, when you go back into settings CricKet should be the only one there and it should be default.
Start\Settings\Connections\Connections Under the General Tab Enter Cricket. Under the Modem Tab put in Cricket Mobile Web select modem to cellular line. Click next put in #777 to dial to Cricket, click next… User Name: [email protected] Password: cricket Domain: Leave Blank, click finish…under proxy settings, check these 2 boxes (this network connects to the internet, and this network uses a proxy server to connect to the internet) Proxy Server: wap.mycricket.com click advanced. The only thing with a value should be HTTP wap.mycricket.com:8080 the rest blank. Click ok and ok again, this ok should bring you back to the connections screen at the bottom click advanced. Click select networks. Under both drop downs select Cricket. Click Ok Go into Exceptions Click add new URL for each of the following settings you are going to need to click add new url again, these don’t all go under one “Add new URL” Block
*mms.mycricket.com/servlets/mms
*.mms.mycricket.com/servlets/mms
*mycricket.com/
*.mycricket.com/
*.mms.mycricket.com/
*mms.mycricket.com/
Then Soft Reset.
COPIED FROM http://forum.ppcgeeks.com/showthread.php?t=25859
no credit to myself
AHHH!!!! His reply makes better sense for your question then mine.
I bow to you oh gran masta!!!
Hi All,
Not a flaming thread at all this but I hope an informative one. I love the Energy ROM and the fact that I mention it here is not to say it is a bad ROM.
I have been battling with MMS settings on my HD2 for a long time. I have never managed to get it to work at all, whatever settings I tried.
The issue it seems was the ROM I was using, the Energy ROM is one in particular. Possibly more but I have had the problem for so long I can't remember what other ROMs gave me problems.
What I can say is that in desperation, ran out of ideas, I tried changing ROMs with the sole intention of testing MMS settings and there it was, I changed to the Artemis ROM and all was well, MMS settings worked.
I am going to do further tests to be 100% sure but one thing I have noticed was that with the Energy ROM I couldn't select 'celular Line (GPRS), it was always greyed out to 'Celular Line'. I think this might have been the problem but as I say some confirmation of that required.
Here are the O2 settings:
http://mobileguide.o2.co.uk/devices/device.jsp?deviceId=614&tab=8&step=2&settingId=2897
I hope this helps someone.
Neo
those data settings are for the mobile data connection, , , mms wont send over that data network. O2 require a wap data modem set up too, purely for mms to send over.
when connectionsetup runs at first boot with an o2 sim, it sets up two data accounts, 'mobile web' and 'o2 active'.
mobile web is for, well, mobile web, and runs at full data speed, and the o2 active account is what the mms server settings are pointed at, and connects to o2's wap server.
have a peek HERE for o2 active settings.
The thing that confused me for ages is that when you go to settings connections connections manage existing connections,, it only shows you the 'mobile web' account, until you go to 'advanced - select networks' and change the top dropdown to 'o2 active', when you can then view/edit that account.
dont forget to change that top dropdown back to mobile web, cos if you leave it set to o2 active (like i did today) it uses the wap server for all your data, which isn't as fast as the mobile web server.
samsamuel said:
The thing that confused me for ages is that when you go to settings connections connections manage existing connections,, it only shows you the 'mobile web' account, until you go to 'advanced - select networks' and change the top dropdown to 'o2 active', when you can then view/edit that account.
dont forget to change that top dropdown back to mobile web, cos if you leave it set to o2 active (like i did today) it uses the wap server for all your data, which isn't as fast as the mobile web server.
Click to expand...
Click to collapse
I got confused for a while and spent ages trying to work it out. If you go Settings>Connections>Connections, under here you should find two titled sections, Proxy Internet and My Work Network.
What I have is under:
- Proxy Internet>Manage existing connections: contains the mobile web settings
-My Work Network>Manage existing connections: contains the o2 active settings using wap server.
One other thing to check is go to the Sense Message tab and go: All Messages>Menu>Setting>Options>Menu>MMS Server select the o2 MMS (might be named differently depending on ROM). You'll find a list of server details, don't need to touch these, the only thing to check is "Connect via" option and make sure it points to My Work Network. This will pick up the correct wap settings.
Just thought I'd offer my findings.
Neo_XDA said:
Hi All,
Not a flaming thread at all this but I hope an informative one. I love the Energy ROM and the fact that I mention it here is not to say it is a bad ROM.
I have been battling with MMS settings on my HD2 for a long time. I have never managed to get it to work at all, whatever settings I tried.
The issue it seems was the ROM I was using, the Energy ROM is one in particular. Possibly more but I have had the problem for so long I can't remember what other ROMs gave me problems.
What I can say is that in desperation, ran out of ideas, I tried changing ROMs with the sole intention of testing MMS settings and there it was, I changed to the Artemis ROM and all was well, MMS settings worked.
I am going to do further tests to be 100% sure but one thing I have noticed was that with the Energy ROM I couldn't select 'celular Line (GPRS), it was always greyed out to 'Celular Line'. I think this might have been the problem but as I say some confirmation of that required.
Here are the O2 settings:
http://mobileguide.o2.co.uk/devices/device.jsp?deviceId=614&tab=8&step=2&settingId=2897
I hope this helps someone.
Neo
Click to expand...
Click to collapse
Just in case someone follows this link and gets confused, the settings in it are for contract, not pre-pay.
Pre-pay:
APN - payandgo.o2.co.uk
Username - payandgo
Password - password
Proxy Tab - 'This network connects to the internet' should be ticked. That's all. No further details are necessary.
What NRG rom are you using? To avoid having to enter anything manually, after flashing one of NRG's rom, when the phone automatically configure network with O2 SIM at first boot, simply select prepay or contract (postpay?) as appropriate. Soft reset. After phone reboots, hit Start, go into Settings, Connections, Connections, then on the Task tab tap ' Automatically configure connection'. Allow it to do its thing, then soft reset. I haven't had to manually enter data or MMS settings for my O2 prepay sim in an NRG rom for a long time : )