Related
First I appologize for the delay in the availability of this ROM. I was out of town on some business, and the site was down again for a certain time.
To get down to the details, this ROM is the complete set of all three .nbf files, I chose the 2.06 NK.nbf because the cleartype fonts are way better than the 2.02. The radio stack included is version 1.18, and the extended ROM (ms_.nbf) is a customized 2.06.100a, which is a mixture of the extended ROM that dcs posted, the one that came with the 2.06 ROM from the mystery guy and the official Asian 1.60.44 ROM.
I had to remove a couple of the Asian telco provider settings because there was no more space left in the extended ROM since the new versions of the software had larger file sizes than before, and the AutoConfig for Asian telcos alone takes up a lot of space too.
I still included the Extended ROM Viewer and almost all of the newer versions of the software included in the extended ROMs posted by dcs and the mystery guy.
The following telco providers were removed (due to their file sizes being the largest):
1. 1010
2. One2Free
The Socket SDIO Wi-Fi that were available in the previous ROM I posted were also removed due to the lack of space, the SPB GPRS Monitor that was provided as part of one of the extended ROMs posted was also removed. The thumbpad driver is in the extended ROM but does not auto-install, since some times it causes problems, you may install it separately by just clicking on the cab file.
The files removed are included in the .ZIP file so that they may be installed separately if desired.
I would like to thank dcs,mamaich, the mystery man and all other developers who contributed to this endeavor.
RE
Hi ZeroXtreme!
Thank you very much!
Could you post the breakdown of the content here?
Thank you again
Nice work ZeroXtreme
ZeroExtreme is my hero !
Customized ROM Content
NK.nbf = 2.06 (Mystery Man)
Radio_.nbf = 1.18 (dcs)
ms_.nbf = 2.06.100a (Mixed with dcs ms_.nbf, Mystery Man ROM and official Asian 1.60.44)
Extended ROM Contents:
CameraRC141_WWE.sa.CAB
MIDI561.sa.CAB
CprogHook.WM2003_2577.CAB
LoadDialogInit_MS_10150402.sa.CAB
MMS_v2.0.0.13_BA_WWE_0831.CAB
Caller_ID_WWE_RC10.CAB
EmailWiz_v1.01.0003_NL_1027.CAB
IntelliDialer_T-Mobile_WWE_RC10.CAB
IntelliPad_TMO_WWE_B12.CAB
Version_OU.sa.CAB
ClearVue3.4.381WWE_0616_Ozonup.sa.CAB
Extended_ROM_viewer.CAB
sales_service.CAB
hk_html.CAB
BTPSKeyUpdate_003.exe
Autoconfig.txt
Autoconfig.exe
Autoconfig.exe
TPDisable.exe
TPEnable.exe
Also all of the Asian telco settings except the ones listed in the first post that were removed.
it'a Chinese version or English version?
cool thak a lots
Version
vbexpert said:
it'a Chinese version or English version?
Click to expand...
Click to collapse
Its an english version all the way.
Problem...
Hi Zero,
Would like to check with you.. I got this problem. After flashing everything, some how..after booting up.. there is this error.. "Connection Flash Manager" stating "Saved data is corrupted, System will erase all data to fix this error!" But even after i click yes.. the problem will still arise no matter when i softreset. Any idea what is going on?
Thanks
Ranma
Re: Problem...
RaNmA_ said:
Hi Zero,
Would like to check with you.. I got this problem. After flashing everything, some how..after booting up.. there is this error.. "Connection Flash Manager" stating "Saved data is corrupted, System will erase all data to fix this error!" But even after i click yes.. the problem will still arise no matter when i softreset. Any idea what is going on?
Thanks
Ranma
Click to expand...
Click to collapse
I am not too clear about the problem, you flashed your device with the ROM I posted?
This did not happen to me during the multiple times I flashed my device and my dad's device.
I am a bit puzzled here, can anyone help in this matter? ANy similar experiences?
It's so difficult to download! :? I must have tried at least 6 to 7 times. Each time it just stop there.
hi people, i m new to this forum and new to xda2. Just wondering, how do u guys download and load up all the upgrades? hope u pros can give me some pointers.... thanks in advance
Finally managed to download the file. Do I need to do anything before installing the new ROM?
I had once tried to upgrade my unit (blame it on initial enthusiasm, I'd seen all these talks about upgrading to newer ROM versions everywhere on the net that I downloaded an upgrade 2 weeks before I actually bought my device) with a ROM version I had downloaded from O2's UK (The unit was bought from singapore/Honkgkong...Asia ROM presumably)site which naturally and the consequenses were very depressing , I was left with a dead machine on my hands and nobody I knew could be of any help. Anyway that had been taken care of a couple of days back when it reflashed at an authorised service centre.
Well that being that , now that its working fine and now that I see all this talk about windows mobile 2003 SE here I have this irresistable urge to try upgrading mu unit to run SE.
A couple of things before I try to get adventurous
1)How do I do a backup of of EVERYTHING ON MY MACHINE ( Original BASIC/Just out of the box/First time run software included ) So that I don't have to take a week off work just to get the unit reflashed.
2) How do I do a restore all of the backed up data on my device if the 2003SE upgrade doesnt work? From what I have learnt , it isnt anything like a regular computer where just about anyone can format boot and reload windows if it crashes.
I figure a dead PPC is like a regular computer with a dead bios.
I can understand that this post is about 5 times the length of a usual post here but I just had to get all my backup plans in place before I jump off a cliff.
you can use either the x-backup in the xda itself and making a complete back up to your sd or mmc card or make a backup via active sync on the tools menu
where is the download link??
Anonymous said:
where is the download link??
Click to expand...
Click to collapse
You have to log in to see the download link :wink:
I have an xda II australian model, i want windows media player 10, can i use the chinese rom??
This is gonna be my first time to update the ROM of my device so some questions:
Did you include upgrade instructions on the zip?
How do I disable some of the .cab files on the extended rom? I dont like some of them.
Had any probs with this rom on Globe?
~ishtangli
What's the BT software on the new rom? Widcomm or MS?
Can you tell me what is the use of these file... can i delete it?
CprogHook.WM2003_2577.CAB
OEM_CHS_OU_04110301.sa.CAB
Version_OU.sa.CAB
Is it safe to delete those files? Tnx
removed those from my ext rom... but i do have version_BA
Can u tell me whats the diff about this two files:
Version_OU.sa.CAB
and
version_BA
Tnx again..
I honestly dont know dude.... but my EXT rom says it is 1.12.924.wwe
maybe in your case it states 2.02? can you send me the file or attach it here and I'll try it
TIA
double_ofour said:
Can u tell me whats the diff about this two files:
Version_OU.sa.CAB
and
version_BA
Tnx again..
Click to expand...
Click to collapse
version_BA = 1.12.924
Version_OU.sa.CAB = 2.06.100a
:arrow: ExtendedROM versions ( chose 1 you indulge )
CprogHook.WM2003_2577.CAB = mamaich contacts extension ( useful! )
OEM_CHS_OU_04110301.sa.CAB = additional configuration for chinese version = safe to delete in english ROMS
Yup.. yup.. yup.. maybe thats the thing... cuz when i used the DCS ExtROM with Version_OU it says that my ExtROM is 2.06.100a and when i installed the ExtROM asian Version provided by one of our kabayan.. with version_BA it says that my ExtROM are now 1.something.something... but anyway heres the file.
And one thing... what is the use of:
tFlashMan.exe
NFlashman.exe
CFlashman.exe
AFlashman.exe
Cuz when i deleted those files... my device increased a bit of speed when reset...
again.. is it safe to delete those files? Thanx again...
those flashman..... are for permanent save applet....
I dont use permanent save.... so I deleted those four flashmen
double_ofour said:
Yup.. yup.. yup.. maybe thats the thing... cuz when i used the DCS ExtROM with Version_OU it says that my ExtROM is 2.06.100a and when i installed the ExtROM asian Version provided by one of our kabayan.. with version_BA it says that my ExtROM are now 1.something.something... but anyway heres the file.
And one thing... what is the use of:
tFlashMan.exe
NFlashman.exe
CFlashman.exe
AFlashman.exe
Cuz when i deleted those files... my device increased a bit of speed when reset...
again.. is it safe to delete those files? Thanx again...
Click to expand...
Click to collapse
tFlashMan.exe
NFlashman.exe
CFlashman.exe
AFlashman.exe
:arrow: PPC flash player manager files for playing animated plug-ins ( Animatedtoday, flashdash, etc...)
delete if you wont be using those "moving" thingy which S-L-O-W-S your fone big time..
TTFN kabayan....
yes its also used by permanent save thingy... :wink:
yep.. its for setting the version
Yeah... now i've got WM2003SE 2.06WWE more faster and very stable... i've just followed these steps...
===========================================
Posted by Sin:
By first flashing with the 2.02.t1WWE ROM (& 1.18.00 Radio + Extended ROM), then setting up BT and detecting all devices but before adding additional software, I ran an ActiveSync backup. The reason I used ActiveSync was to capture the registry and system state but not an image of the whole ROM.
I then flashed with the 2.06.00WWE ROM + 1.18.00 Radio & Extended ROM, but this time I restored from the ActiveSync backup. Rather than what I expected (everything good about 2.06 to be blown away), ActiveSync restore did a merge of the 2 registries and overwrote the files not in use.
The end result came as a surprise:
I now have a version 2.06.00WWE that doesn't hang/delay on reboot, runs faster, looks great with cleartype and now has BT Handsfree as an option. Handsfree works great, though still blocks ActiveSync via BT (a reboot auto disables it) but it doesn't interfere with the radio now.
Are you sure they didn't just rename BT Handsfree in 2.02t1WWE to BT Headset in 2.06.00WWE? (same functionality, just no menu option in the later)
The reason I'm posting this, is not to produce a backup file for installation, but to give those of us playing around with the ROMS's food for thought.
I'm curious what would happen if someone installed an English version, deleted Media player 9 & it's registry as much as possible, then backed up. Then installed the Chinese version (2.20.07CHS with Media Player 10) and restored the original backup over it.
Would you end up with a combined Chinese version in English with Media Player 10?
(Before you ask why I don't try it myself - I need a break so I'm going back to work )
Source: http://forum.xda-developers.com/viewtopic.php?t=14227
===========================================
and if your not using the flashmans files then delete those flashmans file on startup... now ive left in my startup are the "CheckAutoRun, ChgDfLnk, IA_Caller_ID, poutlok, RegNotify, stk" and makes your PPC fast. Try it...
Just install the 2.02 WM2003SE DCS Rom then use activesync backup.. (Dont install anything after the 2.02 was installed just backup after upgraded to 2.02) after the activesync backup were completed reflash again, use the 2.06 WM2003SE Mamaich Rom then Restore the backuped files from activesync... then delete those flashmans... then VOILA!!!
Result: Fast and Stable, For me no hangs for reboot fast load when reboot and more stable... (For me... i dont know for you...)
Just try...
mines working the way i want it ( no hangs etc ) for more than a week now...got tired on reflashing and flashing...im testing the whole phone to the extreme ( calls, texts, games, movies, etc ) since the last time i flash and so far, its quite stable...
the reason : i just streamlined the today plugins to the one designed to run on SE ( RhinoCode plugins ) , thou i got a near-full ExtendedROm with extended-extended ROm ( \storage ), i dont even get unplanned soft resets till now... :wink:
this is my experience so far....
double_ofour said:
Yeah... now i've got WM2003SE 2.06WWE more faster and very stable... i've just followed these steps...
===========================================
Posted by Sin:
By first flashing with the 2.02.t1WWE ROM (& 1.18.00 Radio + Extended ROM), then setting up BT and detecting all devices but before adding additional software, I ran an ActiveSync backup. The reason I used ActiveSync was to capture the registry and system state but not an image of the whole ROM.
I then flashed with the 2.06.00WWE ROM + 1.18.00 Radio & Extended ROM, but this time I restored from the ActiveSync backup. Rather than what I expected (everything good about 2.06 to be blown away), ActiveSync restore did a merge of the 2 registries and overwrote the files not in use.
Click to expand...
Click to collapse
Perhaps you can upload both registries so we can do a comparison to see what is the difference between the 2 registries. Worth the check, if it does solve a few problems for those installed with either 2.02 or 2.06 ROM.
regards,
Henry
err, i wouldn't delete those "flashman" applications, as they're not from, lol, shockwave flash player.. those are there to detect inserted SD/MMC/CF cards as far as i know...
my 2 €urocents
double_ofour said:
By first flashing with the 2.02.t1WWE ROM (& 1.18.00 Radio + Extended ROM), then setting up BT and detecting all devices but before adding additional software, I ran an ActiveSync backup. The reason I used ActiveSync was to capture the registry and system state but not an image of the whole ROM.
Click to expand...
Click to collapse
Please, can you upload one Backup.stg file from 2.02?
dutty... dont worry, i deleted them flashmen..... my sd card still works..
if you have doubts, relocate them to a new folder and test the xda
[quote="henrylim
Perhaps you can upload both registries so we can do a comparison to see what is the difference between the 2 registries. Worth the check, if it does solve a few problems for those installed with either 2.02 or 2.06 ROM.
regards,
Henry[/quote]
Interestingly enough, there's a posting that suggests that there is actual difference in the registry settings of 2.06 versus 2.02 ROM...
http://forum.xda-developers.com/viewtopic.php?t=13820&highlight=
Perhaps we should pursure the registry differences between the 2 if it does make our ROM more stable?
for stable Radio signal strength
i managed to gain additional bar of Radio signal strength here in Pi. How? read and download the radio stack here . Thanks to Zman for trying... :wink:
Can anyone post or PM the last release of Caller ID ??
My 1.0 ITA is not consistent, so I would like to try out a more recent release... ITA or WWE are both welcome.
thanks
version 1.20 may be the last version.
here you go
Thanks, but...
thanks guys, I tried both.
But:
ITA is the same I have (the about window says 1.00)
WWE looks to have dbase compatibility problems with contacts: gives a contact dbase read error
Thanks anyway.
cool, didn't know 1.20 works on Himalaya, but it does as long as you overwrite all the files
Now I can remove Ringtonex
i tried thw WWE version ! but it hard-resets my XDAII 1.66WWE !!!
thanx to the backup!
is there an offical version of Caller ID?
thanx
Files and structures changed in 1.20. So if you just run the cab on your device . there will be some files left over from previous versions which didn't got overwrite. They may (or may not) cause problems.
BTW if you don't wanna hard-reset to clear all those files. You have to remove it manually before you install 1.20 cab.
Windows\Caller_ID_(ht).htm
Windows\Setup4CID.dll
Windows\IACIDSync.dll
Windows\IA_P_PhotoV.dll
Windows\IA_P_PhotoC.dll
Windows\IA_P_DspCID.dll
Windows\IA_P_Contacts.exe
Windows\IA_P_Contacts.dll
Windows\IA_P_AssignP.dll
Windows\IA_Caller_ID.exe
This may be not necessary.
My Documents\IA Caller ID Photos\*.*
My Documents\Templates\*.pit
WINDOWS\START MENU\PROGRAMS\Photo Contacts.lnk
WINDOWS\Help\Photo Contacts.lnk
WINDOWS\STARTUP\IA_Caller_ID.lnk
some things in the registry are also no longer needed, by comparing the two cabs i found these things todo:
Code:
remove [HKEY_CURRENT_USER\Software\IA Style\IA Caller ID\1.14]
remove [HKEY_CURRENT_USER\Software\IA Style\IA_P_Contacts]
in [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PimApps\PimExtensions\Contacts\AddIns\IACallerIDMain]
changed "DLL"="\Windows\IA_P_PhotoC.DLL" into "DLL"="PhotoC.DLL"
in [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PimApps\PimExtensions\Contacts\AddIns\IACallerIDPhotoView]
changed "DLL"="\Windows\IA_P_PhotoV.DLL" into "DLL"="PhotoV.DLL"
in [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PimApps\PimExtensions\Contacts\AddIns\IACallerIDAssignPhoto]
changed "DLL"="\Windows\IA_P_AssignP.DLL" into "DLL"="AssignP.DLL"
remove [HKEY_LOCAL_MACHINE\init]
"Depend149"=hex:\32,00
"Launch149"="\Windows\IA_Caller_ID.exe"
in [HKEY_LOCAL_MACHINE\SOFTWARE\IA Style\IACWPlugin\IA Caller ID]
changed "Path"="\Windows\IA_P_Contacts.exe"into "Path"="\Windows\PhotoContacts.exe"
remove [HKEY_LOCAL_MACHINE\SOFTWARE\OEM\3rdversion]
"CallerID"="B3.2"
thanx :lol:
i will give it a try...
thanx a lot...
now i have it working here...
but a little problem...
sometimes it forgets the ringing tone and the phone rings as the defualt tone...
my tones are stored on the SD card...
what's the problem?
I have the same problem.
Now, I've changed the store of picture and ringtone into my device ,not in SD card.
I have found problem in WM2003SE with SD card. Everytime, your device is off and suddenly turn-on ,SD-card cannot be detected.
i am using ROM 1.72WWE with my XDA2...
i have moved the ringing tones to the internal storage...
it's working until now !
CAB wont install, i was running it from the SD card. It tells me that the file is in ROM and cannot be installed.
How do i run the CAB file
When I try to install Caller_ID_WWE_RC10.CAB, it says the file is in rom or in use ?? Try Again Or Cancel ??
zairyaab said:
When I try to install Caller_ID_WWE_RC10.CAB, it says the file is in rom or in use ?? Try Again Or Cancel ??
Click to expand...
Click to collapse
Bcz the old IA CALLER ID is still running and you didn't delete it files that's why it's working with you.
First of all delete the IA caller Id shortcut from the \WINDOWS\Startup , reboot the ppc, then delete the files manually as it's posted before in this thread.
Good luck..
Following instructions step by step this worked perfectly.
THANKS
Joao Caldeira
Joao_Caldeira said:
Following instructions step by step this worked perfectly.
THANKS
Joao Caldeira
Click to expand...
Click to collapse
same here!
i3oyi3astos said:
CAB wont install, i was running it from the SD card. It tells me that the file is in ROM and cannot be installed.
How do i run the CAB file
Click to expand...
Click to collapse
same problem with me IA_contact can not be replace, but when i copy it to my Extended ROM and run configurator to add it to my config, then hard reset it, it installed properly.
there are two downloads in this forum. Which one should i download? I have an unlocked o2 xda IIs in english.
one is WWE and the other is ITA. Guess :lol:
the WWE is World Wide English : ver 1.20, the other is an old Italian 1.0 I think
Is this (WM2k5_1.50g_XDA2_HIMALAYA.rar) newer then this
(WM2k5_XDA2_HIMALAYA_O2_FullRAM)
getting confuse.
I have a few question, please advise me.
1. extracted either files, and found that there is no (ms_) and (Radio_)
is this normal ?
2. i saw Radio 1.7.
Do i need to put Radio 1.7 together with NK.nbf and HimaUpgradeUt.
3. As for Protocol
Do i need to grab from the WM2003SE upgrade files?
I have read Wiki, but it did not mention about Radio 1.7 and Protocol
please guide me.
keithhiap said:
Is this (WM2k5_1.50g_XDA2_HIMALAYA.rar) newer then this
(WM2k5_XDA2_HIMALAYA_O2_FullRAM)
getting confuse.
I have a few question, please advise me.
1. extracted either files, and found that there is no (ms_) and (Radio_)
is this normal ?
2. i saw Radio 1.7.
Do i need to put Radio 1.7 together with NK.nbf and HimaUpgradeUt.
3. As for Protocol
Do i need to grab from the WM2003SE upgrade files?
I have read Wiki, but it did not mention about Radio 1.7 and Protocol
please guide me.
Click to expand...
Click to collapse
WM2k5_1.50g_XDA2_HIMALAYA.rar :shock:
to my knowledge g could be newer than f the one in the full ram version, so this potantially could be newer, as for the files ms & radio they have to be in the same folder as NK, regarding the protocol i have no idea what do you mean so please explain further
Basically, i am trying to claify by comparing WM2003SE files.
You see, when you extract WM2003SE, you will see 3 files (MS, NK and radio) right?
And in WM2005, you only see 1 (NK).
So, by my understanding, there is no Radio, and MS(in this case, this is protocol) in WM2005
Does it means that do i need to copy Radio 1.7 FTP: xda:xda and (MS) from WM2003SE into WM2005 folder?
pardon my english.
i see the screenshot for WM2005, and it has the radio 1.7 and protocol 1337.38
this really confusing me
Also reading the upgrading procedure. is just use patch 1, patching the NK files
then use ERedit and change the operator
this leads me that this file is only for OS.
So, as for radio and protocol (here i means , MS and radio), it is copy individual from different files and place it into the folder WM2005(here i mean going to upgrade)
thanks
by the way, this file WM2k5_1.50g_XDA2_HIMALAYA.rar is only 6.08MB, which is smaller then WM2k5_XDA2_HIMALAYA_O2_FullRAM (23MB)
Huh, I downloaded it and my rar file was 23695Kb, the extracted NK.nbf was 32769Kb.
I need my device at the moment so I dare not risk the upgrade at the moment. If anyone has performed the upgrade please post a line if it was successful.
cheers
hey guys,
there is nothing wrong with it...
i just uploaded it onto ftp. so if you have downloaded something smaller than usual size, you did the download before it was completely uploaded...
And yes, it is the newest version....
buzz
buzz_lightyear said:
hey guys,
there is nothing wrong with it...
i just uploaded it onto ftp. so if you have downloaded something smaller than usual size, you did the download before it was completely uploaded...
And yes, it is the newest version....
buzz
Click to expand...
Click to collapse
Buzz,
what are the enhancements done on it ?
Btw thanks you for the hard work once again...
buzz_lightyear said:
hey guys,
there is nothing wrong with it...
i just uploaded it onto ftp. so if you have downloaded something smaller than usual size, you did the download before it was completely uploaded...
And yes, it is the newest version....
buzz
Click to expand...
Click to collapse
Thnx Buzz, I just did the upgrade, no problems.. seems more stable... at least after running it for 5 minutes :wink:
Changes.log
Buzz,
Great and awesome work as usual
Just wondering if you can post a changes log or something so we can see any updates / changes you guru's have made
Just one question, in the final steps when we have to hardreset the pocket it's says format storage, it's internal storage or storage card?
eloco said:
Just one question, in the final steps when we have to hardreset the pocket it's says format storage, it's internal storage or storage card?
Click to expand...
Click to collapse
It's the internal storage eloco... Storage Cards ramain the same.
I'm getting reports from Newsmobile.it forum that this "g" version doesn't exposes the whole 128MB RAM amount........... :?:
Perhaps are there some additional steps to do?
I'm getting reports from Newsmobile.it forum that this "g" version doesn't exposes the whole 128MB RAM amount...
Click to expand...
Click to collapse
just flashed mine & memory is showing 62.00 for Storage and 56.34 for Program. I can live with 118 if this this image stops sucking my battery dry.
Can you list the differences/improvements?
Is the NAND Disk renaming to Sotrage the only change?
Can you list the differences/improvements?
Click to expand...
Click to collapse
I'm still waiting to see an improvement. Even with the slightly newer kernel I still see my battery dropping approx 1% per hour. Maybe that's OK, but with my radio, BT, and IR off I think it should do better than a 25% / day drop. If my radio was on, for 8-12 hours then 25% (maybe 40%) makes sense. I do notice that ActiveSync seems to load itself periodically (which I never saw using WM2K3SE), and I assume my serial port is being energized whenever AS loads. This could account for the power drop, but I'm still observing it. I haven't seen anything I could point to as an improvement.
I was hoping to see an improved video camera and working SMSs... :wink:
Oh well, I'm willing to wait whatever time necessary for better and better releases of BuzzMobile5.0
WoW another version from Buzz.... Buzz can u please whats the diff between the old and the new pls..
i've upgrade my xda with 1.50g, it works just great, with more stability on my device, but still with the minor bug (camera, and record button). i can see the program memory is bigger than the 1.50f, so i can open the 3mb excel file freely. now i can use the wisbar advance 2 without a bug, i think....
gadz, or anybody else with WM5, have you tried Wisbar 2.10.0.29 ? When I tried to run it, it would lock up until I renamed lrgwesex.dll. I'm also experience small graphic hic-ups, is anyone else?
http://www.lakeridgesoftware.com/forum/viewtopic.php?t=1977&start=15
Hi there,
i have a problem, my hermes did a hard reset (after playing with Sktools) ,and the bad thing is that i took all the cabs out of the extrom to free space and install other( prog not cab).
Now, after using V3a unlocker and the cab mountAllExtom, i see the ext rom
and can erase progs in it but the memory remains in use . i only have 0.84 M free .
can someone help me to recover all that precious space
Thank you
Thierry
Belgium
mth said:
Hi there,
i have a problem, my hermes did a hard reset (after playing with Sktools) ,and the bad thing is that i took all the cabs out of the extrom to free space and install other( prog not cab).
Now, after using V3a unlocker and the cab mountAllExtom, i see the ext rom
and can erase progs in it but the memory remains in use . i only have 0.84 M free .
can someone help me to recover all that precious space
Thank you
Thierry
Belgium
Click to expand...
Click to collapse
I'm not sure if this is the best way, but try to upgrade to lastest LVSW that includes Extended ROM, so after the upgrade, you can unlock in the same way you do in the past and use the 10Mb extra space.
Of course, if you are not planning to upgrade to WM6, don't follow me
REgards.
thank you jcespi2005
but i prefer to stay with a french and stabel rom. Are they any french patche for this rom.
Th
flash a NBH containing only an extrom using HardSPL, this will fix your issue.
Thanks Pof,
but i am a beginner.
Where can i find it or how can i do it ?
TH
wiki and forum, search for: nbhextract, nbhgen, hardspl and customRUU.
1) Flash HardSPL (latest version) on your phone
2) Extract ExtROM.nb from any shipped NBH (it doesn't matter which one) using nbhextract
3) Convert ExtROM.nb to NBH using nbhgen
4) Flash your newly created NBH file containing only ExtROM into your device using CustomRUU, make sure to start the upgrade in bootloader mode with activesync disabled.
super
muchas gracias Pof
I'll let you know if i succed
Thierry
Use the same guide here but change the technique to Ext.ROM only and don't select the OS.nb. In other words it's exactly the same steps exept for one.
filehttp://www.mrvanx.myzen.co.uk/hermes_guide/Downgrade/
ok sniper251
this means i only have to "click" on the extrom button and disregard the others ?
Yes and don't forget step #4 in Pof post assuming you have Hard Spl 1.40olipro.
Also you can check wether the .nb file is good or not before conversion using the file attached.
It worked fine to extarct the extrom.nb but which command do i need to execute the NBHgen ?
BTW i could not download the koch generator
Thanks for help
Thierry
i succeed in doing all the works and....it works
Thank you so much for ur help Guys
Th
mth said:
i succeed in doing all the works and....it works
Thank you so much for ur help Guys
Th
Click to expand...
Click to collapse
congratulations
Wellcome to the game.....