Hi
Ive just been on teh orange site, and I see there is a new ROM available http://web.orange.co.uk/story/sm_1047574.html
The new version has an operator version 3.661.230 (MMS version). But my SPV does not seem to have an operator version
Currently I'm running:-
Rom version 1.60.00WWE
Rom date 12/03/03
Radio version: 1.10.00
Protocol version: 1337.18
ExtROM version: 1.60.38
Is it worth upgrading?how will I benifit?
Cheers
JustinP
Hi,
Checked out the new upgrade from Orange and it works perfectly on my SPV M1000.
The benfits of upgrading are that you will be able to send MMS messages from your phone without having to configure everything yourself (which I had to do!)
The other benefits (apparently) are better radio and GPRS, but I haven't noticed any difference yet.
Also, while I was upgrading, I had a message saying there was a problem and to start again. Don't worry if this happens as I reconnected the phone and it installed fine.
Hope this helps!
Thank you!
First of all THANK YOU justinp for spotting this and sharing it with us!
I've also been calling Orange trying to find out about updates, but unfortunatly with no success.
Second to all:
a) I share justinp question, but my setup is a bit older:
Currently I'm running:-
Rom version 1.52.00WWE
Rom date 10/23/03
Radio version: 1.05.16
Protocol version: 1337.16
ExtROM version: 1.52.56
I could not find anything looking like the 3.661.230 where they indicated it.
b) Once I am going through the asshole of a a ROM upgrade, are there real advantage in going for the imate 1.72 update and going through a slightly more complicated procedure?
Just to put into context I already have installed thanks to this forum an SMS SW version I am happy with and I want to buy a BT GPS in the next two month so if you know for sure that it is not going to work either with my ROM or the new one from Orange please let me know!!!
THANKS!
Chris
Orange M1000 Upgrade ROM Thur 12th Aug 2004... Problem
Hi,
I upgraded my ROM to the latest from Orange UK and my bluetooth headset (Logitech) paired OK and I can hear the people talking, but they CAN'T hear me!
Anyone had this type of problem before? I have used the MMS version. Today I will try the NON-MMS version and see if that allows 2 way communication via Bluetooth
Thanks
Nitesh
I just upgraded my ROM and now I cant see the STORAGE folder. Anyone else have this issue?
Storage folder missing
I too upgraded my M1000 and when I did a restore from Sprite - It too made my storage and storage card disappear. In the end I just did a hard reset and manually installed my programs and did not do a restore.
Re: Storage folder missing
nbharadia said:
I too upgraded my M1000 and when I did a restore from Sprite - It too made my storage and storage card disappear. In the end I just did a hard reset and manually installed my programs and did not do a restore.
Click to expand...
Click to collapse
Hi,
You say you have problems with the Storage/Storage card going missing - when you performed the upgrade, were these still visible until you restored things with Sprite because this might be the problem if you are restoring an old configuration with an updated ROM.
I haven't tried my phone with a Bluetooth headset, I got the MMS version, will let you know if I have the same problem, but everything is working fine on mine at the moment.
Hi
I have installed the upgrade, everything works as well as it did before, time will tell if there are any improvements.
After an upgrade dont do a restore as the old backup is not compatible with the new OS. Its just the way PPCs work. I'm afraid you need to re-install everything from scratch, it too me about 4 hours, but its done know.
Cheers
JustinP
m1000 rom
hi guys
any chance someone could post just the extended rom from the up grade cheers
To get the upgrade click on the link I posted in the first post of this thread
help
Just tried this update and received an error message.
Took the phone out of the craddle and performed a soft reset..
Screen still says "Serial V1. 03"
I cannot get it to do anything.
How do you perform a hard reset? Have tried pressing reset button with no battery (battery catch up and down) and tried letting the case touch the pins on the phone which can reset it.
TRULY HELP!!! PLEASE PLEASE HELP (please!)
With thanks
Dave.
yep ive just done the same,
yep ive just done the same, been trying for 1 hour now to get it running but no luck.
just spent an hour on to orange trying to explain the phone now neads replacing but they cannot send out till tomorrow.
lets hope it has the new rom installled or i may be in the same boat tomorrow
It now works!!! PHEW!!
Tried the hard reset & nothing happens.
What I did was hard reset then tried the update again... software now tells me that phone is now not compatible with the update.
I then repeated the above 17 panic-stricken times (both reset then update) and eventually it started the update process. Has now finally completed.
I was so worried!
GRPS is still flaky and still waiting for the MMS message sent to myself to go through (a bit slow).
Quick question for those who have updated
Hi!
Could any of you that have done the update please tell me what ROM version do you get after the update? 1.52, 1.60, the last 1.72?
Have u noticed any improvement with the use of BT (expecially with GPS).
Thanks!
Chris
After the update you will get
Rom version 1.66.00WWE
Rom date 02/20/04
Radio version: 1.10.00
Protocol version: 1337.18
ExtROM version: 1.66.230
So far I see no imporvements
Cheers
JustinP
Hard reset ???
I also upgraded my SPV with this ROM with MMS. I found no improvements, but 1 major problem. Sometimes the SPV is in suspend mode, i wait for several of minutes and want to push the power button, the device doesnt seem to react. Putting in the cradle isnt working also and taking the battery out and in again is also a failure. So the only sollution is to hard reset the m1000. Since the upgrade (2 weeks ago) i performed 2 hard resets. You guys also got the same problem? Or do you know how to fix this? I tried to upgrade my orange rom to the original Qtek 1.72 rom, but i got a message 120: error country code. So any ideas?
Urguntly need rom upgrade for spv m1000 orange uk
please can anyone kindly give me the link to download
SPV M1000 ROM UPGRADE SOFT.
REGARDS
SARO
Re: Urguntly need rom upgrade for spv m1000 orange uk
saro said:
please can anyone kindly give me the link to download
SPV M1000 ROM UPGRADE SOFT.
REGARDS
SARO
Click to expand...
Click to collapse
http://web.orange.co.uk/assets/sw/RUU_v1.1_OrangeUK_v3.66.1.200_Ship.exe
Here you go, although this ROM is quite old now (check the date of the original posts!!
I really miss my M1000, it was my first PPC Phone!
Fin
Thanks for that link.
I needed to restore my m1000 back to 2003SE after an experiment in upgrading to WM6 and realised I didn't have the ROM.
Cheers
J
Thanks
Thanks for the link. have been searching for the rom for about 1 month now.thanks thanks thanks
Just upgraded per DCS's instructions and am most pleased with the SE upgrade although my radio shows Radio verison 1.14.00 so I am hopefully assuming therein lies the problem.
I get no phone ring I've tried all the ring options from vibrate all the way up to ring to vibrate then ring, etc. but everytime I try to call my cell phone it never rings on the phone just eventually goes to voice mail. Anyone have any ideas or how to upgrade JUST the radio version to the current 1.18?
My PDA information if this helps is:
TMobile MDA II
ROM verison 2.06.00WWE
ROM date: 06/14/04
Radio version: 1.14.00
Protocol version: 1337.24
ExtROM version: (this has always been blank even prior to upgrading)
Thanks in advance for some input.
Don't be serious.
Firstly,you need to make sure that sound problem occur with ringtone only
What about system sound ? if it's fine, problem must be in ringtone only.
If it's ringtone problem, you need to check your Ext ROM about MIDI.cab file(use extended ROM viewer or extended ROM unlocker)
If it doesn't have MIDI.cab, try to use my attach file.
Secondly, if problem not occur only ringtone, try to flash ROM again.
If you still need radio ROM 1.18, you can use search to find radio1.18 posted by mamaich.
or just simply you may try flash with ROM 2.06 from http://forum.xda-developers.com/viewtopic.php?t=13588&start=0 (look at mamaich comment, he provides ROM 2.06 file)
Hope you can fix this problem.
Nope not the ring tone. System sound works fine and can test ring tones in the Phone utility. All sounds work as expected with the exception of course of the phone ringing when a call is received.
What's odd is I can hear in my BT Jabra 250 headset the ringing to answer it but the phone never rings or vibrates. I also get a notification that I missed a call but once again never a ring or vibrate.
Tried reflashing the ROM via Sin's setup twice already but to no avail. My unit now shows but the problem is still there.
ROM version: 2.06.00WWE
ROM date: 06/14/04
Radio version: 1.18.00
Protocol version: 1337.38
ExtROM version: still is blank
Are you using Wisbar Advance? There is a problem with this preventing the ring tone in SE devices.
I've also found that mine (2.06) doesn't ring while in landscape.
As a matter of fact I just upgraded to Wisbar Advance 2 (paid for it to boot) and I've noticed that if I don't exit Wisbar then I cannot rotate the screen without corrupting the screen.
I just reflashed and ring tones are working fine. I will continue installing my apps and test a call after each installation to determine the problem. But since all my apps have worked fine with the exception of WisBar then I think you hit the nail on the head.
I will install that shortly and see what results I get and report them here.
Thanks
Wisbar Advance 2 kills phone & corrupts screen in WM03SE
Well after two days of reflashing my PDA and trying to narrow down the problem the good people at XDA.Developers forum suggested the problem could in fact be WisBar Advance.
How right you are. The solution after two days and half a dozen reflashes was to simply remove WisBar Advance v2 and all is well again. This after purchasing what looked to be a fine upgrade to an already outstanding program.
Problems to be aware of with Windows Mobile 2003 SE Phone Edition using WisBar Advance v2 are the following:
1/ Loss of phone ringing
2/ Corrupt screen when rotating
If those two issues can be resolved then this will again reside within my PPC. Now to work on getting a refund since this has been a nightmare that until my refund is issued is still ongoing.
Hi and thanks for any advice!!!!!!
I bought a qtek2020 off ebay, and when I received the pda it had chinese (OS).
I'm not fluent in chinese or even english for that matter,
so I placed the new WM2005 OS, on the unit and had a difficult time with the unit.
so I found this forum meaning, XDA-Developers, AND (I"M DAMMED GLAD I DID),
anyway I downgraded the pda to (XDA2JoJo.v3.2zs)2003SE.
and the program went through all the (1 through 5) steps, on loading the new (OS), it took about 55 min, to load the new OS, so I thought I was good to go.
now my problem is that when I go to (Device Information) the unit reads,
ROM version: 2.06.00WWE
ROM date: 06/14/04
Radio version: NONE
Protocol ver: NONE
ExtROM ver: XDA2JoJo.v3.2zs
I can not read the (IMEI)# on the unit when I type in (*#06#) it does have the # on the back of the unit under the battery.
I had checked the IMEI# to see if it was blacklisted and the # came up clean and good to go.
The unit will not read the sim card when I put it in, and it does say the unit is unlocked when I ran the XDA2unlock proggy I got from here.
I did do a seach here and either I'm just (stupid) and don't understand, or all of the above.
can someone point me in the right direction to this matter of no (Radio version) and no (Protocol version), and why the unit won't read the sim card?
Thanks in advance'
r_ :?
my BA does the same.
my BA does the same.
If I reset it, it sometimes restart with Radio, ok.
I run HTC_Hermes_SIM_CID_Unlock_v3a on my 8525
auto_unlock_v3a went well
when I transfer program HERM_Unlock_v3.exe to the phone it give me error message "the file HERM_Unlock_v3 cannot be open. either it is not signed with a trusted certificate, or one of it components cannot be found. you need to reinstall or restore this file"
Itry to put in different place on the phone still the same problem.
here is the device information:
rom version: 1.34.502.1
rom date: 09/21/06
radio version: 1.16.00.00
protocol version: 32.53.7018.01h
anyone please help?
Itry to run the program again but when it get to flashing hermes screen then active sync disconnected everytime.
what is going on? anyone advise
thanks you
v2 bat is better and is trusted & not certified
cingurlar 8525
i will try that thanks you!
Anyone know which WM6 have the most complete and tested good application (XM radio, Skype, media player, youtube player...)
please recommended
THANKS YOU
Hello all,
Pls regarding support me on this case,
Current ROM (2003se) of my device as below:
Rom Version:: 2.06.00WWE
Rom date: 06/14/04
Radio Version: 1.10.00
Protocol Version: 1337.18
ExtROM Version: 2.06-PDAMobiz
6 months ago, my device meet a problem:
- When the capacity of Battery (1100mAh) is about 20-30%, immediately it turn off.
- The radio is instable & always flow down during calling --> voice not clearly from two site.
Nearby, i have a new battery (2400mAh) which replaced, current status:
- Main battery can remain to 2-3% of empty capacity and then, the device turn off. It seem the backup battery is malfunction.
- Still the radio is instable & always flow down during calling --> voice not clearly from two site.
Do you agree my solution as below:
- Replace the backup battery which is integrated in device
- Only Upgrade the Radio --> Kindly help me the detail manual to do it. However, i know the step by step guiding to upgrade the ROM for Hymalaya type which have posted a lots in this forum.
Thank you very much for your understanding.
Regards;
changngoc;
just flash as u manually do it, but replace the nk.nbf file the radio file.. so lets suppose its in a folder with the RUU and the Radio Upgrade only, it will just upgrade the radio and leave ur ROM untouched