Hello,
I received my Qtek 8500 recently and it has many T9 Languages, but no Portuguese. Can anyone help me install Portuguese T9 on it? Many thanks,
Alan
If you don't already tried, you can see http://forum.xda-developers.com/viewtopic.php?t=56710
It's for tornado/faraday smartphones but maybe it's working also on the star trek.
Thanks. Unfortunately, I saw that yesterday and tried it but it did not work. Maybe we need the file extracted from the ROM of the Star Trek...
What about flashing the i-mate Smartflip WWE ROM on it ?
I have it and it has Portuguese T9...
Just my 2 cents.
Ciao
At the moment it is not possible to flash the iMate ROM to the Qtek because it is CID locked. But maybe you could give me the Portuguese files and I could try to install manually without changing the ROM. It is simple. Please add me to your MSN and we can work this out hopefully. My MSN is [email protected]. Looking forward to it. Thanks!
Alan
Help Needed
OK, I received the files from Mix (many thanks, man!), and tried to add the T9 Portuguese, but it is not working. I have it as available now, but when I input anything, nothing happens. The procedure I followed was the one posted by Ronswens. Maybe for the Qtek 8500 there is a different procedure. If anyone can help, please do. It will be much appreciated. Thanks,
Alan
Re: Help Needed
alanbr said:
OK, I received the files from Mix (many thanks, man!), and tried to add the T9 Portuguese, but it is not working. I have it as available now, but when I input anything, nothing happens. The procedure I followed was the one posted by Ronswens. Maybe for the Qtek 8500 there is a different procedure. If anyone can help, please do. It will be much appreciated. Thanks,
Alan
Click to expand...
Click to collapse
Just a question: did you unlock your device, or is it still locked ?
I don't mean SIM locked, but application locked !!!
Please, have a look if you can move links within "\Windows\Start Menu" and its subdirectories...
Otherwise it would be anyway difficult...
And/or maybe there are some other references within the registry that could prevent you succeed...
Just my 2 cents...
Ciao (and good luck...).
Hi Mix,
Yes, I do have the phone application unlocked. I used HTC Registry Editor to change the value of those 2 keys and then I ran the SDA Application Unlock executable. So I believe it is fully application unlocked. Just for the sake of it, I tested moving the shortcuts from the Windows\Start menu as you suggested and I had no problems in doing it... So I believe we have to find out what else is necessary... But thanks again for your support! And congrats on the Fifa World Cup!
Alan
Michele,
I think I am closer now to the problem. I tested with Spanish and it worked. However, it does not work with Portuguese no matter what I do. But now we know that I am not making any silly mistakes on my side, and that the problem has nothing to do with my phone being locked, etc. All the languages that you sent to me seem to work, except Portuguese... It seems to me that the Portuguese files are somehow corrupted. Since you do have Portuguese T9 on your device, may I ask you to please try to use it and see if it is working? Let me know the results. Many thanks for your help!
Alan
alanbr , hi !!!
You are from Portugal right ?
Where did you buy your Qtek 8500 ? have you managed to fix the problem with T9 PT ?
And do you know if your QTEK 8500 allows firmware updates from QTEK ?
Thanks...
By the way can you leave me a PRIV MSG with your MSN ?
Thanks again.
alanbr said:
Michele,
... Since you do have Portuguese T9 on your device, may I ask you to please try to use it and see if it is working? Let me know the results. Many thanks for your help!
Click to expand...
Click to collapse
Sorry for the delay, but YES, they do work on my Smartflip...
I did not know any word of Portuguese, but I tried to write "Quero" and "Buscar" and it perfectly reported those two words among some others which I did not recognise...
I suppose then it works... ;-)
Sorry giving you such bad news... but you asked for it...
Ciao
Help alanbr
Hi!,
Could you send me the spanish files and the process to install it (hotmail: [email protected])?.
I have the same problem.
Regards
Sorry for bumping an old thread up, but did anyone managed to properlly install the T9 files in Portuguese (Portugal) for the Qtek 8500?
Edit:
I fell stupid! When I was writing an SMS I pressed the * button and a T9 menu appeared where I could select the portuguese T9. There's no mention to this on the user manual (as many other features). You can even configure other T9 settings there and even add your own words manually.
T9 .cab files needed
Does anyone could provide me the T9 .cab file for this ? Could I use this file in my O2 Xda Stealth since I can not write SMS or anything from the keyboard (Physical pad) and I would like to do this.
Thanks
Related
Hi all.
Just flashed my daughters buggy Orange ROM Hurricane to the Russian Qtek ROM found in this forum.
Can anyone tell me how to get it to display in English, if it is possible? Or do I need to flash to a different, English-only ROM? Any feedback will be greatly appreciated.
mackaby007 said:
Hi all.
Just flashed my daughters buggy Orange ROM Hurricane to the Russian Qtek ROM found in this forum.
Can anyone tell me how to get it to display in English, if it is possible? Or do I need to flash to a different, English-only ROM? Any feedback will be greatly appreciated.
Click to expand...
Click to collapse
No worries. Got it sorted!!
Could you explain to me in steps how you did it? Because I really would like to do this as well... Thnx!
Russian to English.
Sjraar said:
Could you explain to me in steps how you did it? Because I really would like to do this as well... Thnx!
Click to expand...
Click to collapse
Hi Sjraar.
Sorry I misinformed you all by mistake. The Russian ROM works perfectly, but whilst I can change the language to English UK or English US via the Regional settings, everything becomes English (Menus etc) all text, except when you try to type a Note or SMS, then all fonts are in Russian.
Received SMS is in English, but I don't know how to change settings for the keboard/dialpad to be English input. I assume there must be somewhere in registry to change that, but i don't know where and what value to change.
Otherwise the ROM is perfectly stable and totally unbranded!
Anybody know what reg values to change? Any help will be appreciated plus it will give us all a clean, unbranded ROM in English!!
Meanwhile, does anyone still have a copy of the SDAII ROM? I've searched through the entire net (slight exaggeration!) but to no avail. Someone must have it or know of a download link that actually has it, and by that I don't mean the www.iris-crap link to Blue Angel ROM update.
Anyway, here's hoping.
PS. On the Russian ROM, all installed applications still read as English, actually everything is in English, except what you input/type yourself.
If anyone has a direct (working link) to the german ROM (SDAII), that would be better also as they use fonts more in line with the English ones, which would overcome the illegibility of Russian fonts in SMS or type/input.
Hope this helps.
There should be a way to turn it to English right? What if U turn local settings to English, and not just the language? Perhaps that would change it? I tryed it on my C550 (turning it to language English, and Local to Russian, then the date showed turned up in Russian... Maybe the other way arround it would do the same?
mackaby007 said:
Hi all.
Just flashed my daughters buggy Orange ROM Hurricane to the Russian Qtek ROM found in this forum.
Can anyone tell me how to get it to display in English, if it is possible? Or do I need to flash to a different, English-only ROM? Any feedback will be greatly appreciated.
Click to expand...
Click to collapse
hi..qtek 8200(spv c550) english rom.(messages caracter russian)
http://www.smartturk.info/modules.php?name...opic&t=2677
sda2 rom english..
http://www.smartturk.info/modules.php?name...opic&t=2664
hmm, might look interesting Rafet, but I'm sorry to say I can't make a word out of what is been said on these pages...
Perhaps you could translate it for me/us? Thanks!
Yes, it does look interesting. It also looks like a Turkish version of the T-mobile ROM! Wandering if we'll experience the same problems of not being able to change the language with this ROM too. At least the Turkish fonts look closer to English than the Russian ones.
Oh yeah...changed all settings to English, but that hasn't affected the fonts when inputting data or receiving SMS's.
Still looking..but may give the Turkish ROM a go and will post my findings. Thanks to Rafet for the download links and Sjraar for your reply/intersest.
Eureka!!
rafet said:
hi..qtek 8200(spv c550) english rom.(messages caracter russian)
http://www.smartturk.info/modules.php?name=Forums&file=viewtopic&t=2677
sda2 rom english..
http://www.smartturk.info/modules.php?name=Forums&file=viewtopic&t=2664
Click to expand...
Click to collapse
Thank you very much Rafet. Your link to the SDA II ROM worked and so does the ROM, which I am happy to report is "ENGLISH". All's well with the world again and my daughter loves me again.
The update/flash ran smoothly and quickly and whilst branded with T-mobile stuff, the ROM seems ok. Will report back when [email protected] been extensively tested. Thanks again.
Don't how I came to this idea, but when you placed the russian rom on your device, did you turn-on T9 input for sms? Don't know where I read it, but perhaps that was the problem...
Sjraar said:
Don't how I came to this idea, but when you placed the russian rom on your device, did you turn-on T9 input for sms? Don't know where I read it, but perhaps that was the problem...
Click to expand...
Click to collapse
Hi again Sjraar. No I didn't initially but have tried it since flashing it with the ROM, but 'twas no use. It all remained in Russian.
I am however happy to report that the T-mobile ROM is much more stable than the previous Orange ROM that the device came with. No problems there at all.
My prophet is O2 XDA neo in German. I tried to change the language to English with the setting in regional setting as you said, but failed. nothing happened. are you sure that you just made some change in regional setting and then everything showed in english, including Menu?
Qtek ROM = No-go for me!
jackeyz said:
My prophet is O2 XDA neo in German. I tried to change the language to English with the setting in regional setting as you said, but failed. nothing happened. are you sure that you just made some change in regional setting and then everything showed in english, including Menu?
Click to expand...
Click to collapse
Yes jackeyz. All i did was go into regional settings and changed any and every option that related to English UK and the menus and allmost everything else ended up in English. However, as I stated previously, anything you would type/input into the phone would result in Russian which I can't read and any incoming texts/SMS were also appearing in Russian, so I gave up after searching for answers and coming up empty.
Like i said, the T-mobile ROM works perfectly and since having flashed it, my daughter has reported no problems at all. Hope this helps a little, but the Qtek ROM was a no-go for me.
Keyboard Language vs. Display Language
Gents, thanks for your suggestions - you've helped me to solve the issue I was fighting with for 2 evenings on my HTC Diamond.
Assuming that English is available on all devices "by default", try the below options (good luck):
a/ Initial language installation (e.g. Russian) => Russian Keyboard
- irrespective of Regional Settings change, this setting allows to retain special local characters/keyboard
- keyboard can be changed between Russian <-> English upon activation (e.g. during writing SMS)
- this set-up doesn't seem to impact Regional Settings (display language)
b/ Change of Regional Settings into English - Keyboard, Location, Language
c/ under Settings -> Personal -> Input Method -> Options, turn off “System Localization" – this setting seems to block activation of English Display and to revert Regional Settings into the Local Language, irrespective of any other changes to the settings
d/ upon synchronization with PC, suggest maintenance of the same Regional Settings
If someone is interested, here there are files to copy in \windows folders of pocketpc to change dictionaries and spell checker in italian
simply wonderful!
Sam Trevi said:
simply wonderful!
Click to expand...
Click to collapse
Fantastic!!
Doesn't work
It doesn't work for me, copied the files in the Windows folder, dictionary still in english.
No work also here ...
The italian dictionary was a way cool idea though .. it does not work on my S200 WM6 Crystal V3.
Anyone has a clue ?
Is it possible to have the T9 system in italian ?
Cheers !
I have Touch VIII and it works fine, suggested words are only in italian.
For T9 system I use HTC Phone Pad international, and then I choose italian language
All okie now but what about Tim MMS ?
Sorry guys, my mistake !
I managed to have the it dictionary work properly now.
Cannot use Tim MMS though, I have the TimItaly.cab and it did set up a Tim Internet connection, it works with explorer but unfortunetely not with MMS, any suggestion ?
reach me at: [email protected]
Thanks a bunch !
try to change the proxy port in the message setup from 80 to 8080 or vice versa.
bye
stefano
wipo1965 said:
The italian dictionary was a way cool idea though .. it does not work on my S200 WM6 Crystal V3.
Anyone has a clue ?
Is it possible to have the T9 system in italian ?
Cheers !
Click to expand...
Click to collapse
I am using Crystal V3 as well, and the italian dictionary taken from this thread works flawlessly.
You have to specify in "Regional settings" the country (Italy) and the italian locale.
Ciao
I try to use with new Shadow Touch....but not work....any suggestion???
Thanks
Same here .. ita doesn't work
Same here with Shadow TE, great Rom, great speed, unfortunately the IT.zip files are not working .. anyone succeeded in having the italian dictionary work for T9 and spell check ?
Happy holidays you all, and thanks in advance.
johnnyealex said:
If someone is interested, here there are files to copy in \windows folders of pocketpc to change dictionaries and spell checker in italian
Click to expand...
Click to collapse
Could you tell me exactly where to copy the 3 files in my ppc?
Hello everyone
I'm Chinese,I have a Qtek 8500
I flash the rom with this one ruu_star100_3.6.251.0_02.67.30_qtekeur_ship
And I like this rom
But I want to know is there a way that I can let it show the chinese character and input chinese
I don't want to flash to other roms
Thank you
My QQ is 114932035
MSN:[email protected]
Tried upload the support file but failed.
Please add me to your QQ buddy list:162267960.
vincentblue said:
Hello everyone
I'm Chinese,I have a Qtek 8500
I flash the rom with this one ruu_star100_3.6.251.0_02.67.30_qtekeur_ship
And I like this rom
But I want to know is there a way that I can let it show the chinese character and input chinese
I don't want to flash to other roms
Thank you
My QQ is 114932035
MSN:[email protected]
Click to expand...
Click to collapse
Did you find the solution? I do have a soft called asiareader which can be used for reading of Japanese and Korean (not always properly). Not sure if it can show also Chinese, but don't think there'll be a problem because it's showing kanji for me. However, you can NOT write in any of those languages - yeah, a reader.
I'll be also glad to find out how to type in Japanese and Korean on my Qtek 8500 (same ROM as yours), without flashing any asia ROM.
nevermind said:
Did you find the solution? I do have a soft called asiareader which can be used for reading of Japanese and Korean (not always properly). Not sure if it can show also Chinese, but don't think there'll be a problem because it's showing kanji for me. However, you can NOT write in any of those languages - yeah, a reader.
I'll be also glad to find out how to type in Japanese and Korean on my Qtek 8500 (same ROM as yours), without flashing any asia ROM.
Click to expand...
Click to collapse
I do fix the problem with charlieluo's help.He sent me a cab file called EnableChinese.cab.After install this the English system can show chinese correctly.In order to input chinese I install a input program called A4.Now I enjoy it!
Install this 2 software that contain in de rar to yr program file....
download here:
http://rapidshare.com/files/72889980/Chinese_Input_Software.rar
Hi
I have a HTC s740 and I have a problem.
My rom is 1.14.401.1 (rom date: 10/06/08), radio version 0.24.30.24, CE OS 5.2.20279 (build 20279.1.3.4).
The language available is uk english,magyar,portugues,us english,neverlands,turke,slovencina,cestina,polski, romana; the italian language is not present.
I have install the .cab for xt9italian and after soft reset, the xt9 italian work very fine, but when I open the slide for use a complete keyboard the key "fn" not work..
is possible a solution to this problem?
thanks and excuse me for my poor english
its so easy... buy an italian rose !!
stesa said:
its so easy... buy an italian rose !!
Click to expand...
Click to collapse
you are a very funny man...please not to soil the thread if you do not know to answer
benny73 said:
you are a very funny man...please not to soil the thread if you do not know to answer
Click to expand...
Click to collapse
you are right...... good luck in your wait
upppppppppp
Nobody founded a solution for this problem? the 'fn' taste, if i install the xt9 cab in italian, it don't work
benny73 said:
Nobody founded a solution for this problem? the 'fn' taste, if i install the xt9 cab in italian, it don't work
Click to expand...
Click to collapse
Hi Benny73, yes, I am looking for the Italian language pack too, I don't so much care about the T9 for Italian, just the language pack for the rest of the phone. It seems silly that HTC don't make it available as standard or even just as a download.
Anyone else out there got any ideas please?
Same problem
Hi Benny73, i have same problem. I have Rose buy i Germany and I need czech language but i have enl. germany and also italy. Maybe way to change together or try to dump adn cooked RUU.
nemetis said:
Hi Benny73, i have same problem. I have Rose buy i Germany and I need czech language but i have enl. germany and also italy. Maybe way to change together or try to dump adn cooked RUU.
Click to expand...
Click to collapse
Nemetis, you have the Italian language in your Phone?
I have the same as benny73, I would be interested in your ROM if I could get it please.
Hi StevoDevo i can try to dump and recook my RUU from phone but it would be best if anywhere write cookbook step by step a we try to cooking together. What do you think?
nemetis said:
Hi StevoDevo i can try to dump and recook my RUU from phone but it would be best if anywhere write cookbook step by step a we try to cooking together. What do you think?
Click to expand...
Click to collapse
Hi nemetis, the "official" answer from HTC is...
They can not give me the Italian Language in the phone because....
It comes down to the licensing agreement for windows on the device, because certain countries have different licensing agreements with Microsoft about the software, Italy being one of them.
So, the only way to get an Italian ROM is to get someone (like yourself) who has one, downl load it, change your device to accept ANY ROM for THAT device, i.e. not just the set of ROM's it was allowed to accept and then you can load it.
To be honest... I bought the phone as a present for my wife for Christmas *yes, she's Italian) and she has said not to worry, she is fine with it being all in English.
So I think I'll just leave it the way it is.
Thanks for offering your ROM though.
I have the WWE ROM version but XT9 didn't offer German as input language only English, Romanian, Slovak, Czech, Polish, Turkish, Dutch, Portuguese, Hungarian, Greek.
So, I had a look in the registry and the windows folder.
In the windows folder you can find several kdb and ldb files.
In the registry you will find under HKLM\Software\Tegic\eT9 the key AvailableLanguages which defines the available languages in the menu. The coding for the different languages can be found under HKLM\Software\Tegic\eT9\LdbFiles.
What I did was to replace 0118 (Romanian) with 0107 (German) and after a reboot I had the German language available.
See also attached screenshots.
So, for Czech and Italian it should work the same, just look for CSlsUN_xt9.ldb for the Czech language (#105) and for ITlsUN.ldb for Italian (#110).
If you don't have these files in the windows folder, for your convenience I have attached them, but I don't know if you need other files (or changes) to get not prepared-for languages to work.
Good luck.
I just found this tutorial that explains XT9 and internationalization very detailed. Looks like I tweaked the registry right on first try.
can you please send me the romanian .ldb and kdb from yout phone
because i try to make my phone witch is a norwegian modell to get the romanian t9 or xt9 to work corectly on this s740
Romanian .ldb and kdb
Sorry for the late reply. But I wasn't logged in for a long time.
Here they are.
Hey guys,
Just received my new Atrix including the Lapdock with Danish keys. Unfortunately it doesn't seem like it's possible to choose Danish as the keyboard language. I've been searching for a while to find a place to download the language or a way to edit the registry, but I cant seem to find anything.. any ideas (sorry can't find question mark..)
Regards
Andreas
There is an update on Motorola homepage:
direct.motorola.com/hellomoto/support/update
I´m in Sweden and I had similar problem. Now after upgrading i can switch to danish or Swedish
Thanks! Actually the phone told me there was an update ready, which I installed and corrected the problem. That just made the lapdock useful again. I guess it's the same as the one on the website. Thanks a lot anyway
Regards