when i booted the machine into bootloader mode, (i wanna flash my exec from english to chinese), it always says "Use DSUU in OS mode, sync with PC first", and I always get connection error at PC at the same time...
what should i do?
me too, how to fix it ?
My device is real Chinese ATOM Exec & I tried to flash it from Chi to Eng & it stop at
I have the same issue!!
can anyone help us???
Related
I've download the Xda-Atom-Exec-CHT-20060721.exe ROM and want to upgrade from my English ROM 20060721B1WWE. I did the below steps:
1. Copy the file Xda-Atom-Exec-CHT-20060721.exe to PC C:\windows\Temp
2. Turn on ATOM EXEC
3. Connect USB cable from ATOM EXEC to PC
4. Get in to Bootloader by pressing "Capture" + "Reset"
Now Atom exec screen display:
(1)debug module through UART
(2)Jump to DM
Enter your selection:
USB connected, Waiting for download command...
5. From PC run Xda-Atom-Exec-CHT-20060721.exe
6. After twice clicks Next, it pop up ask for "Upgrade", I click "Upgrade".
7. An error message came up as picture showing USB not connected.
8. ATOM EXEC screen showed:
!!! Please use DSUU in OS mode and sync with PC first !!!
Usb Transfer Fail
Did I do anything wrong? Please help.
Try putting it into bootloader mode before connecting to your pc :wink:
Can country ID be changed on Atom Exec ?
Tks victoradjei
I actually tried both get in bootloader before / after connect USB, it looks same. The problem is USB not connected, but it is fine if connected on normal status, it can syn to PC.
Is it possible to change Country ID of my Atom Exec then update ROM in syn mode instead of use bootloader ?
Did you also try reverting to one of the regular Atom roms and upgrading from there? Someone has done this upgrade. Search a bit in this forum.
my XDA ATOM EXEC have the same problem,but Xda-Atom-Exec-ENG-20060721.exe have any question.
lawsonxie said:
I've download the Xda-Atom-Exec-CHT-20060721.exe ROM and want to upgrade from my English ROM 20060721B1WWE. I did the below steps:
1. Copy the file Xda-Atom-Exec-CHT-20060721.exe to PC C:\windows\Temp
2. Turn on ATOM EXEC
3. Connect USB cable from ATOM EXEC to PC
4. Get in to Bootloader by pressing "Capture" + "Reset"
Now Atom exec screen display:
(1)debug module through UART
(2)Jump to DM
Enter your selection:
USB connected, Waiting for download command...
5. From PC run Xda-Atom-Exec-CHT-20060721.exe
6. After twice clicks Next, it pop up ask for "Upgrade", I click "Upgrade".
7. An error message came up as picture showing USB not connected.
8. ATOM EXEC screen showed:
!!! Please use DSUU in OS mode and sync with PC first !!!
Usb Transfer Fail
Did I do anything wrong? Please help.
Click to expand...
Click to collapse
hi there, last time i tried to upgrade, i also got that msg. this is the problem, dont put the atom exec on bootloader. just upgrade ur atom exec at "turn on" position. then start the upgrading.
ps : can u email me, where can i get the chinese rom? my email is : [email protected]
thank you
somebody say he know the way ,but need 50 REPLY to suport, your can try to ask him
http://www.discuss.com.hk/viewthread.php?tid=2375924&extra=page=1
i got other way that flash to the CHT rom. You can use the ultraedit sofware edit the diskimage.nb0 file. only need edit the first row of this file. ( you can get the diskimage.nb0 fine in the c:\windows\temp after run the DSUU, BTW you can select see the protected and hided file option in th browser). As the changed value. you can refer the diskimge.nb0 filr in the CHTrom DSUU. detail you can refere the thread here: http://www.pxdxa.com/read.php?tid=21205
I use it to change my new atom exec.
please tell me where can i download the Xda-Atom-Exec-CHT-20060721.exe ROM , chinese rom, thanks
www.seeo2.com
I was just update ENG Atom Exec to CHT Atom Exec,
use ur UltraEdit, open a file which name is diskimage_Ver.nb0 and u will saw the 1st line will be 07210622 change it to 07210629
then save it. Ha Ha..... you can start ur upgrade now.
diskimage_Ver.nb0 will auto creat in c:\windows\temp\ only after u run the rom update Utility
i want to rom chinese atom
i want to rom atom chinese u upload to new post
please tell me where i can download the Atom Exec chinese ROM, i trie the seeo2 website but it won't allow to download the chinese rom because my phone is registered as with english rom...thanks
why i can not update my atom with rom atom exec 0721 mott and my device radio 822n_mn1arc_rs00052 en exrom:ex0023 ihope same one tell me the way when i unlock with unlocker atom my computer die....?
i have the same problem too
anybodi can help us ?
please
Put phone in bootloader(Camera + Reset) before trying the upgrade
hi
Put phone in bootloader(Camera + Reset) before trying the upgrade whatto do next
Thanks
I am very thanksful to you for givin this usefull information
it doesnt work! it says connection error! but when i try to check the usb cable and everything that i need to check it's all ok. what the heck am i missing this time? can any guru or expert or someone knows just how to clear the ROM and install a fresh one? i have installed WM 6.5 for atom exec on my O2 Atom... please help! thank you
Just wondering if anyone out there would be kind enough to upload one of the new Atom Exec roms, edited to re-include the bootloader option (for installation on an 'old' Atom).
The 20060915 rom (not convinced the 20060721 is really the latest being it came out a while back ... and of course there's the name) with R060822N_MN2ARC_RS00013 radio update would be ideal - but as I'm looking to do a housekeeping reflash, any update from the old edited 0721 mod_n-fix rom will be greatly appreciated.
I have upload Roms but i d'ont know if you want those one!
bedav - thanks for the uploads, preferably am looking for a modified 0915 rom ... anyone out there got one ?
V.V.V.Urgent help please
I am stuck with the O2 Atom Exec Rom Version: 20060915 on the Atom and am unable to remove or re-rom any other version. I tired the bootloader mode: Camera+reset but it will not overwrite it and give a USB error. Can anyone tell me how to get rid of it.
****THANKS I HAVE BEEN ABLE TO SOLVE THE PROBLEM****
I got rid of the Atom and bought an Imate JasJam. Much Better Pocket PC Phone on comparision. Slower and a bit more complex but better in features and works well. It is also well supported in Mumbai, India.
THANK YOU ALL.
hsanghavi said:
I am stuck with the O2 Atom Exec Rom Version: 20060915 on the Atom and am unable to remove or re-rom any other version. I tired the bootloader mode: Camera+reset but it will not overwrite it and give a USB error. Can anyone tell me how to get rid of it.
Click to expand...
Click to collapse
I suggest you search through the forum, the solution has been discussed in detail, dont use the SD card to flash back unless you're 100% sure you know what you're doing. What you need to do is dl the edited 60721 rom and flash then you will be able to downgrade rom.
I can't find any of the edited roms on the ftp. Where to get?
try to reupgraded from boot loader!!
HELP
My Atom Exec can't boot, just bootloader only. can't reflash from Device Software Update Utility.exe,
PC report = ERROR: CONNECTION ERROR
Atom report = please use dsuu in os mode and sync with PC first! usb transfer fail
I'm tried rename diskimage_Ver.nb0 to diskimg.nb0, and copy EBOOT.nb0 to SD to SDDownload success, but same can't boot
help me
THANKS!!
silverkuo said:
My Atom Exec can't boot, just bootloader only. can't reflash from Device Software Update Utility.exe,
PC report = ERROR: CONNECTION ERROR
Atom report = please use dsuu in os mode and sync with PC first! usb transfer fail
I'm tried rename diskimage_Ver.nb0 to diskimg.nb0, and copy EBOOT.nb0 to SD to SDDownload success, but same can't boot
help me
THANKS!!
Click to expand...
Click to collapse
User activesync to update the ROM.
@all
anyone have a solution on how to downgrade rom..
i have a ATOM and upgraded to ATOM EXEC rom..
theres some guide in here but its inside of other thread and its not working..
please help us..i know im not the only one have a problem like this..
thanks in advance..
-=[serialzs]=-
If you have Atom Exec ROM, then the bootloader keys are Camera+Reset. If you can enter bootloader, you can now upgrade to the usual XDA Atom ROM.
Cheers,
Jiggs
jiggs said:
If you have Atom Exec ROM, then the bootloader keys are Camera+Reset. If you can enter bootloader, you can now upgrade to the usual XDA Atom ROM.
Cheers,
Jiggs
Click to expand...
Click to collapse
where i can put the bootloader? can you help me? please..
-=[serialzs]=-
serialzs said:
where i can put the bootloader? can you help me? please..
-=[serialzs]=-
Click to expand...
Click to collapse
press camera+reset button. you should see bootloader screen. From here, upgrade using the procedure I discussed in the aku3.3 thread.
cheers,
Jiggs
thanks for the help but i figure it out on my own now..i done it with something i dont think earlier because im too excited..hehe..
now i have a atom rom back again..
i will guide people have same problem..hope i can help..
-=[serialzs]=-
o2 atom upgrade problem
hi
i need ur help
i have o2 atom i upgrade to exec now i can not go back
it give me error in connection
please help
all_brother2002 said:
hi
i need ur help
i have o2 atom i upgrade to exec now i can not go back
it give me error in connection
please help
Click to expand...
Click to collapse
what version of atom exec you use?
-=[serialzs]=-
Well, I managed to downgrade my ROM back to the original Atom (my sig isn't updated - had problems with the extROM wiping itself) - but I was kinda lucky.
Y'see, the AE hack rom I use has an updated bootloader that won't let you do a USB firmware update unless you're activesync'd.
The only way to solve an ExtROM wipe was to reflash the device, so I did. Using the hack ROM DSUU - at this point, the original ROM won't recognize the device - I found that it usually takes a few tries for the extROM update to go through (extROM format fail) - when it fails, your phone will be stuck in bootloader (Connect a USB cable). Repeated attempts to flash the phone solves the problem.
So when my extROM inevitably disappeared again, and I hit the extROM format fail again, I decided I had enough and tried using the original Atom0426-0822 ROM.
It went through this time.
Seems that the only way to bypass the bootloader lock is to semi-brick your device. >_>
Just a question to all of you who are more experienced than me
I want to change my atom exec wwe to cht, can anyone tell me how to bypass the device country id error. do i use an spl? and are these spl programs device specific? or do i use the bootloader mode? Can someone explain that to me?
Thanks all in advance.
Bootloader mode works as long as you aren't using the Atom Exec hacked ROM (bootloader will tell you to use Async if you try). To upgrade, go into the bootloader, connect via USB, and run the DSUU from the computer.
You know you did it correctly when your unit's current firmware information is read as "0" by the DSUU/
Ultimate Chicken said:
Bootloader mode works as long as you aren't using the Atom Exec hacked ROM (bootloader will tell you to use Async if you try). To upgrade, go into the bootloader, connect via USB, and run the DSUU from the computer.
You know you did it correctly when your unit's current firmware information is read as "0" by the DSUU/
Click to expand...
Click to collapse
Strange, i already did that, and got the "0" from DSUU, but when i start upgrading, the bootloader spits out a message saying that i should connect with OS mode.
Anyway, I've edited the diskimage_Ver.nb0 file to do it.
Hi,
I have the same problem :
- bootloader : ok
- firmware 0 : ok
but connection error !
Do you have an idea ?
Thanks a lot.
bedav said:
Hi,
I have the same problem :
- bootloader : ok
- firmware 0 : ok
but connection error !
Do you have an idea ?
Thanks a lot.
Click to expand...
Click to collapse
Hi guy the main key on the file call EBOOT everytime when you want dowgrade your OS to normal ATOM just put this file to you SD card then use the bootloader mode you can see "imge downloading" just wait for a second it will reboot again . then you can use the DSU mode to flash your device
thats work !
Thank you very much !
HELP on my atom exec
w/o reading, i downgraded my atom exec to atom...
hw can i bring back my atom exec default WM5 ROM?...
am planning to upgrde to WM6 aftr...
Anyone can help me !
I flash Atom Exec Rom at Atom, Now I can't flash any version at my Atom,
If can flash, it may stop at flashing Radio,than take it off can power up, but without phone mode[ just is PDA ] ,pls. help me!! Thank you.
You may put your atom to bootloader mode