Hello :
How can i upgrade my HTC TyTN with the imate rom ?
I only get 99 % ....everithing works after that ....except mms... that ive notice.
Any ideas ?
Luis
The upgrade stopped because same cabs need a Imate IMEI....
You need to put the extended memory in the card, soft reset when the fist installation stop, an install manually tha cabs yuo need from the card.
I solved also the MMS problem.
I suggest to use fit4cat tweaker to show the TyTn EXT_Rom content. Save the MMS cab on your computer, then Upgrade to I-Mate rom (look at Wiki, http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades )
During I-mate personalizzation the phone will "freeze"... don't worry just soft reset. just config date, time zone, international setting, then install the TyTn mms cab an configure the MMS
TyTN MMS Ext. Rom CAB File
As I was not aware that the iMate MMS CAB was only installed to specific IMEI devices I did not save the TyTN Ext. Rom to my PC before installing the imate JasJam ROM.
Does anyone have a copy of the TyTN MMS CAB file to save me having to re-install the HTC (QTEK) ROm and then save the file and then install the JASJAM Rom?
Thanks
Mike
Re: TyTN MMS Ext. Rom CAB File
all extended roms are here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtendedRoms
Thanks for that -
I have seen how to unhide the Extended ROM folder and have succesfully done this, however if I try to delete some of the unwanted CAB files I get a message saying the disk is write protected and if I try to copy the TyTN CAB files to the Extended ROM I get he same message - does anyone know how to 'unlock the Extended ROM?
Thanks
#EDIT#
I have installed the CAB in the Temp folder and run it from there - I know have MMS, I then re-ran the Orange CAB and it installed all the correct MMS Settings. I would still like to remove the unwanted CAB files from Extended Sotrage and install the TyTN ones I do want, so if anyone has any idea I would appreciate it. Thanks Mike
If i soft reset before any customizations after a hard reset....and i install cabs from extended rom manually. Will this take up more main memory than if it had installed/customized on its own?
paulesport said:
If i soft reset before any customizations after a hard reset....and i install cabs from extended rom manually. Will this take up more main memory than if it had installed/customized on its own?
Click to expand...
Click to collapse
no, it will take the same amount of memory.
mike.bradshaw said:
I would still like to remove the unwanted CAB files from Extended Sotrage and install the TyTN ones I do want, so if anyone has any idea I would appreciate it. Thanks Mike
Click to expand...
Click to collapse
Try using fit4cat, il should work..
http://forum.xda-developers.com/viewtopic.php?t=61060&highlight=
BT fixed?
Just curious, does this upgrade fix bluetooth issues, like A2DP skipping?
after a soft reset mms desapear
Hello :
I have upgraded to jasjam rom...but i cant get mms ...
I click on Default_MT_Shortcut-MMS-Hermes.CAB but after a soft reset desapear.
I have extended rom visible...
Help wil be gratefull
Thnks in advance
after a soft reset mms desapear
Hello :
I have upgraded to jasjam rom...but i cant get mms ...
I click on Default_MT_Shortcut-MMS-Hermes.CAB but after a soft reset desapear.
I have extended rom visible...
Help wil be gratefull
Thnks in advance
after a soft reset mms desapear
error
Solution to MMS Problem in TyTN->I-Mate Rom Upgrade
1) download from http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtendedRoms TyTN Extended Rom
2) Unrar the file, copy the file named MT_Shortcut-MMS-Hermes.cab anywere in your TyTN
3) Run in your phone the file MT_Shortcut-MMS-Hermes.cab and MMS will be in your phone again.
4)if isn't the same used for internet, config the MMS access point (APN) in start menu>settings>connections tab, then connections icon, click the tab Advanced, select network, New, add and conf My MMS network (APN, Username, Password)
5) Go to Messaging, MMS and config MMS parameters (gateway....)
6) Try your Internet UMTS-GPRS connection, if your phone try to connect using the MMS connections, tap on settings and restore My ISP connection as default for internet. (Stupid software, it automatically try to use the last network configured...... )
Thkns but already try with the cab from dopod and and htc.
I upgrade again with complete upgrade with rom form htc and is working.
To bad o cant use imate.
Related
I had a hard time to upgrade and modify my xda2 so I decided to make a small tutorial for everyone with the information’s I found on the forum. It’s not perfect but it could help.
Thank's to every one who made all this possible!!
Before starting I recommend every one to make a back-up of your rom
http://forum.xda-developers.com/viewtopic.php?t=4608
1- Extended Rom:
Your XDA2 has an Invisible Extended Rom in the device containing the operator’s configuration files and software.
Modifying it will allow you to customize the boot image and to choose the programs you wish to install during the setup of the device.
To show the extended rom on your device your need to apply this small hack and then open your file explorer:
http://www.ppcw.net/index.php?itemid=1638
2- Files contained in the Extend Rom:
Broadcast_WWE.sa.CAB:
Seems to only set the CellBroadcast setting to enabled or disabled. (I guess this refers to the Reception of News via SMS by selecting channels of interested. Quite expensive I think and only interesting for phones that do not have any other capabilities of receiving and displaying information).
T-Mobile NL sets it on, with O2 it's switched off.
CallerIDRC11_WWE_1.5.sa.CAB:
Installs the CallerID application from IA Style and the Photo Contacts extension. There are other programs that are able to provide this functionality but I use it.
CameraRC131_WWE_1.5.sa.CAB:
The camera application for taking pictures and recording videos. AFAIK there is currently no alternative to this one, you should leave it in your ROM.
GPRSMonitor_WWE.sa.CAB:
Includes the GPRS Monitor from SPB Soft. Very useful I would recommend it unless you aren't going to use GPRS anyway.
MIDI56.sa.CAB:
RingTone plugin player. Allow you to play back RingTones in the following formats: mid,3gp,mp4. Also seems to register the audio/midi MIME type for playback of midi files directly from Internet Explorer.
By default the XDA can play back only wav and wma audio files (AFAIK)
MMS1507_WWE.sa.CAB:
Installs the Arcsoft MMS application for composing and sending MMS messages.
VideoMMS.sa.CAB (not contained in Qtek):
Installs the "Video MMS.exe" file into the Windows folder. When you start it you are in camera mode immediately and after you have recorded a picture or video you get into MMS composition mode.
This seems to be just an easier way to compose MMS messages since the main MMS Application (see above) is already able to compose MMS messages.
OEM_AKU1_WWE_4AP.sa.CAB (named OEM_4AP_WWE.CAB in Qtek ROM)
Installs the following files: GPRSAuthentication.exe, BTSetting.exe, STK.exe and WModem.exe
I am not sure if these are customized versions or if the normal ROM doesn't contain them. Well perhaps not because these are specific to the Phone edition so they can't be present in the main ROM, maybe they are contained in the Radio ROM, but probably they are only contained here, meaning you shouldn't remove this cab file.
OEM_WWE_03120301.sa.CAB (named OEM_WWE_03122301.sa.CAB in Qtek ROM)
Installs files for Bluetooth: AudioGW.dll, BthASPlugIn.dll, rilgsm.dll, Serial3.dll and Wavedev.dll. Also contains the new feature of mapping a (dynamic) serial port for BT.
I think you should not remove it.
TM_phone_class10.CAB (not contained in Qtek):
Installs several registry settings regarding phone functionality. (See my other post regarding this topic: http://forum.xda-developers.com/viewtopic.php?t=5539)
TMCOMREG.sa.CAB (not contained in Qtek):
Contains some of the settings contained in the previous one anyway. I'm not sure if it does anything else but I don't think so.
TMD_AP_NL.sa.CAB (not contained in Qtek):
Implements several settings specific to T-Mobile (NL): Restricts video types for MMS. Adds connection and gateway settings for MMS connection via T-Mobile NL. Adds a T-Mobile profile to GPRS Monitor.
I would not install this cab unless you live in NL!
TMD_NL.sa.CAB (not contained in Qtek):
Sets the HKEY_LOCAL_MACHINE\SOFTWARE\OEM\3rdversion\MSYSTEM1 value to the provider name.
Not required!
TMDNLCustomize.sa.CAB (not contained in Qtek):
Adjusts all the "theming" stuff: Changes colors, installs Today-theme, installs T-Mobile Dialpad, sets T-Mobile ringtone.
If you don't like you xda2 look like a pink pig you should leave this out.
(You can extract single items from the cab file if you like)
t-mobile_shortcuts_only(UK).PPC2002_ARM.CAB (not contained in Qtek):
Contains some strange things that seem to me rather useless: "WebDisplayText t-zones", "T-Mobile Resetter.exe", "T-Mobile PIE Launcher.exe", "TMobileWebToday.dll", "T-Mobile Homepage Plugin".
I wouldn't install this one!
Version_AKU1.sa.CAB (Version_AKU1_160.sa.CAB in Qtek):
Seems to only set the version number of the extended ROM in the registry.
3- Modifying and editing your Extended Rom:
Most of the latest XDA2 have a write protected Extended Rom
A) For NOT Write Protected Extended Rom:
If your XDA2 Extended Rom is not write protected just add the new files you want, you can find on the forum many different extend rom files (O2, T_Mobile, Orange) and kitchen your own extended Rom by adding the cab files directly in the Extended_rom directory and soft reset.
B) For Write Protected Extended Rom:
The only way for the moment (until we find a way to make the rom writable) is to use the upgrade programs used by the operators and ER2003Edit program.
1)- Download
http://www.c1au.com/iMatePDAROMS/ruu15283.zip
or
http://www.clubimate.com/Support/ruu113sku1.zip
2) Simply unpack the complete T-Mobile Rom update file (it's a zipped EXE) into a folder.
There you will find these 6 files:
- HimaClearJumpCode.exe
- HimaGetDeviceData.exe
- HimaUpgradeUt.exe
- ms_.nbf <----- this is the file which holds Ext Rom!
- NK.nbf (main rom)
- Radio_.nbf (radio rom)
3) Delete the other *.nbf files to prevent updating the full XDA2/MDA2 rom. You only need "ms_.nbf" and the "*.exe" files!
4) Now modify the ms_.nbf with the tool softworkz kindly provided.
http://wiki.xda-developers.com/wiki/ER2003Edit
5) After this, install the modified ext-rom to your XDA2/MDA2 by starting "HimaUpgradeUt.exe" and follow the instructions!
6) If you get a country code error during the install you will need to modify the country code included in the ms_.nbf file
- Download xda2nbftool
http://forum.xda-developers.com/viewtopic.php?t=5563
- Put xda2nbftool.exe in the same folder as your ms_.nbf file
- Run xda2nbftool.exe from Command Prompt and type the following command
xda2nbftool.exe -so O2 -v ms_.nbf
Replace O2 by your operator’s name (ex: orange, O2 etc)
It should now work!
cheers,
Yann
nice one Yann
Thanks
I had a go at doing the "if your extended rom is protected"
I down loaded the file
1)- Download
http://www.c1au.com/iMatePDAROMS/ruu15283.zip
and accidentally ran it.... I know I was stupid... I now have an I-Mate instead of a XDA - O2. Please help can I get the O2 back is there a programme that does the same as the one I just have used. It has changed every thing the radio stack, the other bits of software, I am just pleased it still works of calls.
I couldn’t find the indivuiual HimaUpgradeUt.exe programme any ware.
Please help I am really stuck at the minute!!
The bit I didn’t understand was the bit about unpack the exe. Which I now understand how to do. Although I have upgraded to Rom 1.52.00wwe, radio version 1.06.01, I can haply say I have the original O2 rom back in place with additional programmes installed in the Ex-Rom. I had a fair bit of space so I popped some music files in as well!!!!
Thanks for all the help!!!!
thanks yann for the perfect summary
as newby i needed something clear like this to dare my first rom changes, and i successfully did!
it would be even more perfect if also somehow the program settings/passwords could be cooked in/restored from the extended rom. i searched the forum but could not find any hints.
Are there methods for this ?
Perhaps a silly question, but I'm fairly conservative when it comes to messing around with my device.
How do you find out or know if your Ext ROM is write protected or not? I know that I can add applications to my Ext ROM and it does not seem like I should be able to do that if it's write protected, but then again I'm not sure if this matters.
Ed
ed, if you can copy files to your ext-rom via activesync, it is per definition not write-protected.
your not that conservative, because you already run a tool or edited the registry to be able to see the ext-rom
ronald,
Well I guess you are right I do like to play around, as I get more comfortable doing so. It is this Forum, guys like you, and some other forums that have made this possible for me to do. For some reason I'm more comfortable in general hacking around a desktop pc than a PPC.
I thought my Ext ROM must not be write protected. When I deleted the TMD files, described here as useless, I got the message that they were read only, but they did go away from the Ext ROM Folder. I do not notice a big difference, however, nor did it free up that much memory. I was thinking that I might need to do more then this. Do I?
So basically, if my Ext ROM is not right protected, and I have been already loading programs into the Ext ROM, I’m pretty much at the place people are trying to get with the Ext ROM Cook ER...Edit. Is that correct or am I missing something here?
Ed
Ed,
I do not like flashing rom (or bios) on either my desktop or PDA (if not absolute sure to fix bugs). However flashing the PDA's ext-rom can basically not screw up the PDA because you don't touch the OS, so I flashed the ext-rom to get familiar with the PDA flashing in general (and also to have a restore of my standard used software after a hard-reset).
About your ext-rom; I do not recognise your situation. I would say if it is read-only the file will not disappear (like with my PDA).
I did notice while editing the ext-rom file for flashing that the file is fixed ~16MB, regardless of which cab's are included or deleted.
Maybe this is the same effect that you see when deleting the file in the ext-rom ???????? (although I can imagine both effects have no relation)
ronald
Camera Programs
Okay,
I made a custom ROM with the following programs:
CAB: \Extended_ROM\CameraRC131_WWE_1.5.sa.CAB
CAB: \Extended_ROM\CallerIDRC11_WWE_1.5.sa.CAB
CAB: \Extended_ROM\MMS1507_WWE.sa.CAB
CAB: \Extended_ROM\GPRSMonitor_WWE.sa.CAB
CAB: \Extended_ROM\Version_AKU1.sa.CAB
CAB: \Extended_ROM\OEM_AKU1_WWE_4AP.sa.CAB
CAB: \Extended_ROM\OEM_WWE_03120301.sa.CAB
CAB: \Extended_ROM\VideoMMS.sa.CAB
Awesome, alot less bloat, but.... Camera doesn't work.. Application says Camera is not a valid Pocket PC application. :: grumble ::
Did I miss something?? Camera.exe is there, but doesn't work
Brandon
My Ext ROM is not write protected, and I'm able to run applications in the EXT ROM Folder. I deleted the 2 TMD and the T-Mobile cab files, but I have not nticed a big difference, nor is my GPRS back to always on, which it should be now.
Perhaps the device requires another hard reset without these cab files in place prior to the changes taking actual effect. Does anyone know if my assumption is accurate about the required hard reset?
Ed
what dictates if the ExtROM is write protected or not? is it the version? or the hardware itself? or a mix of the version with the OS checks?
cuz i believe the ROM version is dictated by the version_AKU1.sa.cab. does that mean we can hack the cab (or use a diff version) to disable the write protection?
i'm using a himalaya btw.
I have a question or two.
I'd also like to know if it is possible to modify CAB files so they install an application and then also put in your purchased key or serial depending on the application so it's already registered to yourself. It seems like it must be possible because the GPRS Monitor on the T-Mobile Extended ROM is already Registered when you try and register it yet I was under the impression it normally has to have a key entered to turn it into the full version with no limits.
This would be great if this was possible, if it's a key file then it's simple to copy it over but how about automatic registry entries? Are these done similar to Windows .reg files? Does anyone have any info if a .reg file can be make and run from the Extended ROM to make changes to the registry? This would also allow me to key in a few other things I'd like presetup.
Is there a way to see what registry changes a CAB file makes other than from purchasing MagicCAB? Is there a free program like this? It seems like a reasonable program from the info but I don't want to spend 10 dollars on a program I might only use once or twice.
Acutally, one more while I'm here. Does anyone have a CAB installation version of CabInstl which puts a shortcut in the Programs or an easy way for me to make that? I've set it up so it will copy the EXE in manually along with a shortcut but I've yet to try it. I think it should work OK I imagine, just might be neater and have an uninstall if it's in a CAB format?
Can you delete files from the extended ROM script? Just so I can clear out a few folders of things I don't want in there when I do a hard reset?
Thanks for all your help. I'm looking forward to making a super kick ass Extended ROM for myself, I'm half way there
Updating the indirect way
Had a few problems with the updating process... and thought i would explain how I got around them!
First I updated to the standard 16007DE ROM
Then I installed the Extended Rom Viewer, and then because it is protected, i copied the contents to my HDD.
Then i tried to open the Rom update from T-mobile with the Extended ROM editor, but kept on getting file access errors The only one i could open was the NL 13006 version. So I changed the splash screen, deleted the origianl contents, and then inserted the contents from my updated original Extended ROM, as well as a few other bits that i could find, IE the extended ROM viewer. It is updating at the moment, So I hope it all works.
I have a few questions though!
Does anyone know a way in which I can automatically install a few themes, and a few ringtones? I have a few MIDI files that i want to be installed into the windows\rings folder, and the themes need to go in a folder called themes in My Documents. I also wanted to ask if there is a way to extract the CAB from another program, for instance Voice Commander. It is an MSI, but only works in windows!!!
Any help would be greatly appreciated...
Greets from Hannover, Germany
Juggs :?
Is this going to work:
- Download ER2003Edit
- Download the O2 XDA2 ROM 1.60.50
- Download the T-Mobile MDA2 ROM 1.60.36
- Remove O2 apps i don't want to use
- Add applications from T-mobile rom which i want to use
- Change ROM provider from O2 rom to to T-Mobile
- Save new O2 ROM and upgrade
But... I want to add custom ring tones to contacts, and if possible also want to add custom picture. Also my camera must be able to work. Which software do i need for this?
Because.. All i want to upgrade is today theme to O2's and also the software to 1.60.50... Does the O2 rom also has an "TMDNLCustomize.sa.CAB" ?
Greek full support language for qtek 2020
Hello,
this is a very intresting site!
Can anyone tell me is exist & where can i dinf an extended rom for qtek 2020 with full support of greek language?
Also there any newer version than the 1.66.00 wwe extended1.66.130 radio 1.10.00 wihich my qtek 2020 has??
best regards
george
A) For NOT Write Protected Extended Rom:
If your XDA2 Extended Rom is not write protected just add the new files you want, you can find on the forum many different extend rom files (O2, T_Mobile, Orange) and kitchen your own extended Rom by adding the cab files directly in the Extended_rom directory and soft reset.
B) For Write Protected Extended Rom:
The only way for the moment (until we find a way to make the rom writable) is to use the upgrade programs used by the operators and ER2003Edit program.
Click to expand...
Click to collapse
2 questions for you,
1. how do i know whether my rom is the editable 1 or the non editable one?
2. I tried option A, just mergly adding the CAB files into the EXTROM but... when the hard reset was perform it did not install the CAB files i added in? what could be the prob i know there is a "autorun.exe" in it but i dunno whether will it affect the process. I also notice a "config.txt" in the extrom, tried editing it but it seems that nothing happen
Reason for adding the cab files is because i was using a 1.72.00 rom with radio stack 1.12 but intend to change it to radio stack 1.14 and also try cooking up my own rom in the ktchen but after doin so its like nothing happen. need some advice for cooking roms in the kitchen been searching the forum... found a few but its all talking about Linux platform.
Hi Kelvin,
1)
The way to know if your rom is not writ protected is if you see a folder called extended_rom in the root of XDAII and if you can add files in it.
If not, there’s a nice tool to make the extended_rom visible and to make it writable.
http://forum.xda-developers.com/viewtopic.php?t=8422&highlight=extended+rom+hide
2) The config.txt is made to lunch the programs in the extended rom when you hard reset the XDA or when it starts for the first time.
You just need to put the cab files in your extended_rom folder and edit the config.txt this way:
Exemple:
I added the cab file vxIPConfig.ppc3_arm.CAB in the folder extended_rom
and added this line in config.txt
CAB: \Extended_ROM\vxIPConfig.ppc3_arm.CAB
Cheers,
Yann
hi yann,
i tried doing that way as i figured out that config is like a startup "prg" to actually start the programs installing when hard reset is performed. But the thing is i cannot make the programs i added in the install after the hard reset is perform. I don't know why but the rest of the cab files can be done. Do adding of all this cab files into the ROM consider cooking ROM??? not really fimilar with the terms of cooking ROM unless that is the way.
I have installed the T-mobile 1.72 Beta ROM update on my O2 XDA. Everything has installed just fine and it appears to be working great. The addition of the Fax module is really welcome although a little buggy has allowed me to send a number of faxes.
The BT stack now gives me an extra option on my Widcom BT software on my desktop pc. It seems much more stable than the O2 stack.
My only problem is that all my MMS, SMS, GPRS and WAP settings are for T-Mobile UK and not O2 Ireland. I have tried to enter them manually with little success.
After reading through some of the other threads would it be possible to take the relevant cab files from an O2 1.60 (latest ROM) Extended ROM and copy them onto my PDA and then run them to install the settings? I also miss the O2 Active screen and would like to install that as well. If this is possible could and please tell me that it is!!!! Would someone be kind enough to send me the relevant Cab files?
Many thanks in advance for any help or advice.
Paul
I think its posted on this thread:
http://forum.xda-developers.com/viewtopic.php?t=8515
On page 2. There is a modified extendend rom.
Thanks for the mail
I have downloaded the extended ROM that you mentioned but it seems to just contain the T-Mobile stuff. I would like a copy of the O2 Extended ROM if possible and just install the O2 settings and Active.
Thanks
Paul
If you have an old backup, you can replace that with the new one you have now. And then runt the desired CAB files (Camera, mms, andsoon) from the new 1.72 upgrade.
Here you go mate...
Attached is a ZIP file, containing a folder.
In it, are ALL the O2 files found in an O2 Extended ROM, as per 1.60.00 ROM Upgrade, O2 WWE.
I am not sure exactly which CAB is the settings file (can anyone tell me what the GPRS settings file CAB is called in an extended ROM), so you will have to find it yourself.
It also includes the O2 Active stuff.
Hope it helps.
Download it quick, becuase I'm not sure the legalities of posting it here, and also its a big file, so using up a lot of my space, so I wanna delete it soon.
Thanks
Thanks Shadamehr
I downloaded the ROM ran the Cabs and I now have O2 connection settings and O2 active. Thank you so much.
My next project is to copy the o2 files to the extended 1.72 ROM so that if I require a hard reset it will install the O2 stuff and the newer 1.72 files etc.
Out of interest the application for unhiding and unlocking the Extended ROM requires the sending of "arguments" how do you do this on Pocket PC. i am familiar with doing this on a desktop PC. Any help would again be appreciated.
Thanks to you all.
Paul
Re: Thanks
Pastor said:
Thanks Shadamehr
I downloaded the ROM ran the Cabs and I now have O2 connection settings and O2 active. Thank you so much.
My next project is to copy the o2 files to the extended 1.72 ROM so that if I require a hard reset it will install the O2 stuff and the newer 1.72 files etc.
Out of interest the application for unhiding and unlocking the Extended ROM requires the sending of "arguments" how do you do this on Pocket PC. i am familiar with doing this on a desktop PC. Any help would again be appreciated.
Thanks to you all.
Paul
Click to expand...
Click to collapse
Er, you've totally lost me mate.
For the Unlocker, all I do, is copy the cab file for it over to my XDA2, then use File Manager on the XDA2 to locate the file, and click to run.
This installs it.
Then, if you go into programs, there is a new folder, next to games, for the extRom tools.
Open that, and you can hide/unhide, and lock/unlock the extended ROM.
It sometimes requires a soft reboot.
When it is unlcoked and unhidden, you can simply delete all files in it, and copy the whole O2 folder contents into it that I posted.
Then, after a hard reset, it will install all the programs in the extended rom.
Not sure what all these 'argument' things are you mention mate, sorry.
Sorted!!!
Did not see the programme group had been using the application via the file explorer and it was asking for "arguments". Thanks for the help.
Paul
Can anyone post or PM the last release of Caller ID ??
My 1.0 ITA is not consistent, so I would like to try out a more recent release... ITA or WWE are both welcome.
thanks
version 1.20 may be the last version.
here you go
Thanks, but...
thanks guys, I tried both.
But:
ITA is the same I have (the about window says 1.00)
WWE looks to have dbase compatibility problems with contacts: gives a contact dbase read error
Thanks anyway.
cool, didn't know 1.20 works on Himalaya, but it does as long as you overwrite all the files
Now I can remove Ringtonex
i tried thw WWE version ! but it hard-resets my XDAII 1.66WWE !!!
thanx to the backup!
is there an offical version of Caller ID?
thanx
Files and structures changed in 1.20. So if you just run the cab on your device . there will be some files left over from previous versions which didn't got overwrite. They may (or may not) cause problems.
BTW if you don't wanna hard-reset to clear all those files. You have to remove it manually before you install 1.20 cab.
Windows\Caller_ID_(ht).htm
Windows\Setup4CID.dll
Windows\IACIDSync.dll
Windows\IA_P_PhotoV.dll
Windows\IA_P_PhotoC.dll
Windows\IA_P_DspCID.dll
Windows\IA_P_Contacts.exe
Windows\IA_P_Contacts.dll
Windows\IA_P_AssignP.dll
Windows\IA_Caller_ID.exe
This may be not necessary.
My Documents\IA Caller ID Photos\*.*
My Documents\Templates\*.pit
WINDOWS\START MENU\PROGRAMS\Photo Contacts.lnk
WINDOWS\Help\Photo Contacts.lnk
WINDOWS\STARTUP\IA_Caller_ID.lnk
some things in the registry are also no longer needed, by comparing the two cabs i found these things todo:
Code:
remove [HKEY_CURRENT_USER\Software\IA Style\IA Caller ID\1.14]
remove [HKEY_CURRENT_USER\Software\IA Style\IA_P_Contacts]
in [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PimApps\PimExtensions\Contacts\AddIns\IACallerIDMain]
changed "DLL"="\Windows\IA_P_PhotoC.DLL" into "DLL"="PhotoC.DLL"
in [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PimApps\PimExtensions\Contacts\AddIns\IACallerIDPhotoView]
changed "DLL"="\Windows\IA_P_PhotoV.DLL" into "DLL"="PhotoV.DLL"
in [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PimApps\PimExtensions\Contacts\AddIns\IACallerIDAssignPhoto]
changed "DLL"="\Windows\IA_P_AssignP.DLL" into "DLL"="AssignP.DLL"
remove [HKEY_LOCAL_MACHINE\init]
"Depend149"=hex:\32,00
"Launch149"="\Windows\IA_Caller_ID.exe"
in [HKEY_LOCAL_MACHINE\SOFTWARE\IA Style\IACWPlugin\IA Caller ID]
changed "Path"="\Windows\IA_P_Contacts.exe"into "Path"="\Windows\PhotoContacts.exe"
remove [HKEY_LOCAL_MACHINE\SOFTWARE\OEM\3rdversion]
"CallerID"="B3.2"
thanx :lol:
i will give it a try...
thanx a lot...
now i have it working here...
but a little problem...
sometimes it forgets the ringing tone and the phone rings as the defualt tone...
my tones are stored on the SD card...
what's the problem?
I have the same problem.
Now, I've changed the store of picture and ringtone into my device ,not in SD card.
I have found problem in WM2003SE with SD card. Everytime, your device is off and suddenly turn-on ,SD-card cannot be detected.
i am using ROM 1.72WWE with my XDA2...
i have moved the ringing tones to the internal storage...
it's working until now !
CAB wont install, i was running it from the SD card. It tells me that the file is in ROM and cannot be installed.
How do i run the CAB file
When I try to install Caller_ID_WWE_RC10.CAB, it says the file is in rom or in use ?? Try Again Or Cancel ??
zairyaab said:
When I try to install Caller_ID_WWE_RC10.CAB, it says the file is in rom or in use ?? Try Again Or Cancel ??
Click to expand...
Click to collapse
Bcz the old IA CALLER ID is still running and you didn't delete it files that's why it's working with you.
First of all delete the IA caller Id shortcut from the \WINDOWS\Startup , reboot the ppc, then delete the files manually as it's posted before in this thread.
Good luck..
Following instructions step by step this worked perfectly.
THANKS
Joao Caldeira
Joao_Caldeira said:
Following instructions step by step this worked perfectly.
THANKS
Joao Caldeira
Click to expand...
Click to collapse
same here!
i3oyi3astos said:
CAB wont install, i was running it from the SD card. It tells me that the file is in ROM and cannot be installed.
How do i run the CAB file
Click to expand...
Click to collapse
same problem with me IA_contact can not be replace, but when i copy it to my Extended ROM and run configurator to add it to my config, then hard reset it, it installed properly.
there are two downloads in this forum. Which one should i download? I have an unlocked o2 xda IIs in english.
one is WWE and the other is ITA. Guess :lol:
the WWE is World Wide English : ver 1.20, the other is an old Italian 1.0 I think
Here is a new rom from the still unreleased Cingular 8525: HTC Hermes (HERM100) branded from U.S. Operator Cingular.
ROM Version: 1.30.502.1
ROM Date: 08/21/06
Radio: 1.11.00.00
Protocol: 32.47.7018.00H
As always, download link on the wiki upgrading page:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
If you have questions be sure to read the Hermes wiki first, specially the Upgrading FAQs.
Notes on this ROM:
* Cingular 8525 doesn't have front camera, you'll need to install cab files from other ExtROM to enable video calling (I used TyTN ExtROM on mine).
* Left button is mapped to push-to-talk application still unavailable on the rom, so it is unuseful. You can map it to any other APP using 3rd party software to remap hardware buttons.
Enjoy
if i upgrade to the cingular 8525 rom, will my tytn still be unlocked? or will it be locked to cingular?
It will still be unlocked. The network lock doesn't depend on the rom you're using.
Guys
Any ideas as to who/what website released this ROM?
- JoKer
What is the OS build?
gravejoker said:
Any ideas as to who/what website released this ROM?
Click to expand...
Click to collapse
A person who preferes to stay anonymous sent it to me.
nickcerda said:
What is the OS build?
Click to expand...
Click to collapse
OS 5.1.195 (Build 14955.2.3.0), so it's AKU 2.3 as all the other available ROMs until now.
i just installed the cingular 8525 rom! and now U CANT DO A LOCK IN ON GSM OR WCDMA MODE! (that menu been removed!)
i going back to the Imate rom!
Trying it now, thanks for the link! It also seems that the MMS limit is increased to 600K!
netboy said:
i just installed the cingular 8525 rom! and now U CANT DO A LOCK IN ON GSM OR WCDMA MODE! (that menu been removed!)
Click to expand...
Click to collapse
I am on the cingular rom, and my menu exists. Go to:
Settings -> Personal -> Phone -> Band -> Select your network type. The options are Auto, GSM and WCDMA.
If you don't have it by default probably it's on the ExtROM, as I said I installed the ExtROM from TyTN, try it.
pof said:
Settings -> Personal -> Phone -> Band -> Select your network type. The options are Auto, GSM and WCDMA.
If you don't have it by default probably it's on the ExtROM, as I said I installed the ExtROM from TyTN, try it.
Click to expand...
Click to collapse
the "Band" tap/menu is missing. probably it' on the ExtRom from Tytn. how do i install the Tytn ExtRom? do u mind tell me? or u rather me search the FAQ?
Any comments as to the stability of this ROM on a TyTN?
Do we know what the different files in the EXT_ROM are for?
netboy said:
the "Band" tap/menu is missing. probably it' on the ExtRom from Tytn. how do i install the Tytn ExtRom? do u mind tell me? or u rather me search the FAQ?
Click to expand...
Click to collapse
1) hard reset
2) do the usual alignment stuff, copy-paste, etc...
3) soft-reset before it starts installing the cingular ExtROM (customizations), you have 3 seconds
4) Unhide your extrom (you can also use fit4cat hermes tweaker for this)
5) Extract the contents of TyTN ExtROM to a folder in your miniSD card.
6) click on the CABs files you want to install, this is what I installed on mine:
From TyTN's ExtROM (on SD):
MT_Shortcut-MMS-Hermes.CAB
MP_mHub_060630.CAB
MT_PC_Hermes_Qtek_WWE_060621.CAB
P_Generic_UI.CAB
PP_3-AP-Patch.CAB
PP_ace-certs.CAB
VT_Engine_23818_ext.CAB
From Cingular's ExtROM (unhided):
MT_Shortcut-MMS-Hermes.CAB
T_mm1lib_DLL.CAB
MMS disapeared and I had to install the CAB 3 times, i used both from TyTN and from Cingular, then setup a default account settings and sent an MMS and received another (I sent it to myself from another mobile phone) and after that it stayed and no more problems with MMS.
I also installed the TyTN green theme (.tsk) because I like how it looks
Hope that helps.
Does the Cingular ROM or EXT_ROM contain the Cyberon VoiceDialer?
(I hope not!)
Yes, it's on the ROM but it's not mapped to any hardware button.
interesting.. BAND selection tab (GSM/UMTS/AUTO) is present in the ROM if Cingular extended ROM is not installed. it is being removed during Extended ROM installation procedure. more over, none of this Cingular CAB files are responsible for removing BAND selection (GSM/UMTS/AUTO) tab.
I have skipped Extened ROM installation, verified that BAND selection (GSM/UMTS/AUTO) band selector is still present and then installed all Cingular extended ROM cab files one by one. supprisingly enough - band selector is still there. there must be some other invisible configuration file in the extended rom. gprs connection is not auto configured either.
@superduper: probably you need to soft reset for the changes made by cab files to take effect. If you want to know which cab file disables it you have to install one, soft-reset, install another one, soft-reset and so on...
never mind
here is. i have selected the line in registry that needs to be changed to:
dword:00000001
default value for this line is : dword:00000000
see below :
----------- 8< -------------------
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\PhoneSetting]
"EnableErrorCause"=dword:00000001
"LongNamePrefix"="UMTS"
"Enable3GLongNamePrefix"=dword:00000001
"EnableUsimEF"=dword:00000001
"ShowNITZPage"=dword:00000000
"HiddenFDNFunction"=dword:00000000
"HiddenBCFunction"=dword:00000000
"FDNQueryPBTimeout"=dword:00060000
"ShowFDNPage"=dword:00000001
"ShowTtyPage"=dword:00000001
"ShowUMTSBandPage"=dword:00000001
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\PhoneSetting\BandType]
"ItemValue4"=dword:00000003
"ItemName4"="UMTS(2100+800)"
"ItemValue3"=dword:00000002
"ItemName3"="GSM(1900+850)+UMTS(1900+850)"
"ItemValue2"=dword:00000001
"ItemName2"="GSM(900+1800)+UMTS(2100)"
"ItemValue1"=dword:00000000
"ItemName1"="Auto"
"ItemCount"=dword:00000004
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\PhoneSetting\NetworkType]
"ItemValue3"=dword:00000002
"ItemName3"="WCDMA"
"ItemValue2"=dword:00000001
"ItemName2"="GSM"
"ItemValue1"=dword:00000000
"ItemName1"="Auto"
"ItemCount"=dword:00000003
------------ 8< -----------------
UPDATE: phone settings.reg file is attache to this message. one needs simply import this file into device registry. no soft reset is required.
P.S. It would be goos if fit4cat will add this feature to his hermes tweaker.
Great finding
Guys, is Cing Video now activated and available as an option?
Thanks.
Is it me or does the ExtROM Unlocker only unhide the Extended ROM on this build - leaving it still read-only / protected?
I tried with fit4cat and the Hermes MountExtROM.cab but no luck modifing contents.
when i try to install cab from file explorer in htc hd2 it gives the message
"this program is from an unknown publisher.You should intall only if you trust its publisher.Do you want to continue?
when i press "yes" it gives me message that "installation of cab was unsuccessful"
i have enough space on my phone and memory card.
i have tried to download cab a no. of tomes
also this is happening with all cabs eg:fpsce,YAHOOMAIL
PLEASE HELP
I have the same problem! Need assistance!
Guys try installing this .cab to device. Then you should be able to install apps again
Nop, this cab also canot be installed.
Can't install or unninstall anymore..
I have the same problem!
Can't install or unninstall anymore..
Can you install from known publishers or is the probelm with only unkwon publishers?
* THIS * might help
it happens with all CAB's and the problem is not only with install, I also can't unninstall. Omarket, WM Market and XDA Market can't also unninstall..
It's a common application lock problem.
The solution that I always use is quite simple.
1. If you have Regedit installed and working use that one. If not download Mobile Registry Editor. Unpack the files, connect your phone through Activesync and open Mobile Registry Editor, you now should be in the registry of your phone.
2. Go to HKEY_LOCAL_MACHINE\Security\Policies\Policies
3. Change the value of 0000101a from 0 to 1
4. soft reboot
Works for me every time.
didn't worked
I had the same problem, tried everything but issue resolved after hard reset.
Cant install any cab
Im among many that seem to be unable to install any cab after flashing CleanEx ROM 6.5.x (sorry , I cant post there!) but no fix appears to be evident.
Has anyone resolved this?
click on a cab and nothing happens (Im well experienced at flashing, installation etc on an HTC Vogue NFSFAN ROM) but this on HTC [email protected] has me beat!