Hey guys, with my touch hd, i like using my in-ear headphones although they are far too loud when using the music player tab in manilla. how can i put the volume down?
try searching, there's already a thread about this.
as far as i know, that thread suggests using advanced config to set the music player value low. Setting it to 1 still makes it rather loud for a minimum sound level and so this doesnt really solve my problem.
also, with the audio booster enabled, how do i change the overall volume?
the only way ive been doing this is by creating profiles with various changes to the overall db values (ie subtracting and adding 1 from total, 2, 3 etc.) but this is a long process and id have to do it for every config.
any ideas?
Lowering the Volume
ASK768 said:
as far as i know, that thread suggests using advanced config to set the music player value low. Setting it to 1 still makes it rather loud for a minimum sound level and so this doesnt really solve my problem.
also, with the audio booster enabled, how do i change the overall volume?
the only way ive been doing this is by creating profiles with various changes to the overall db values (ie subtracting and adding 1 from total, 2, 3 etc.) but this is a long process and id have to do it for every config.
Click to expand...
Click to collapse
This maybe a bit simplistic and you may have tried it, but why don't you take all the frequencies down to -6 in the Audio Booster? This in theory should drop the overall volume by -6db? The other thing I did was buy high impedence earbuds which where 150ohms, but ear buds are not everyones thing. I don't like "in the ear" phones myself. I have some yuin PK1's....they are superb HiFi.
If the music is too loud, you can edit the registry to fix it:
Local_machine\software\HTC\AudioManger_eng\Config\ music_player_volumn
Change the DWORD to 10 or lower and soft-reset the mobile
(Original value is hexadecimal: 64 or Decimal: 100)
You have just decreased the maximum music player volume in TouchFLO3D
Here is another tip.
If you want the phone to remember the last volume used with headphones, so that the next time you plug them in, they will automatically play at that last volume, you can also do this in the registry. The only problem with this particular tip, is that after every soft-reset, you'll have to enter the changes again in the registry.
But here is how to do that:
Local_machine\software\HTC\VolumeOverlay\SavedHand SetVolume
Change DWORD to 0
ASK768 said:
Hey guys, with my touch hd, i like using my in-ear headphones although they are far too loud when using the music player tab in manilla. how can i put the volume down?
Click to expand...
Click to collapse
How about using your Stylus (or finger) to lower at minimum?
Rgds,
huh?
Why would you edit registry etc?
Whats wrong with the up/down volume keys or as stated the volume icon in taskbar?
homer285 said:
huh?
Why would you edit registry etc?
Whats wrong with the up/down volume keys or as stated the volume icon in taskbar?
Click to expand...
Click to collapse
In some cases, (and I had this problem), even having the volume at just a couple of bars was pretty darn loud. That meant that it didn't give you much room to play around with a decent volume range. Basically, you knew you never needed the volume louder than just a few bars. If you wanted to rock out - it was fine. But if you wanted to listen to music at a soft volume, it was not that easy. If you turned it down a bar or so, it would drop the volume quite a bit and another bar down meant no more volume. Also, the side buttons drop the volume faster than if you use your stylus. So, that meant that using the buttons sometimes dropped the volume from loud to mute in one press. So, I had to take the stylus out every time to carefully lower the volume just a bar or two. And that gets annoying.
So by making the registry adjustment, you are basically setting your desired max volume to be at the top of the bars. Now you have whole range of bars to slowly drop the volume down when you want to listen to softer music.
Not everyone has this problem. I had it with my stock ROM, but once I started using Dutty's ROMs, I never had a problem with it.
I see, 5 mins out of box Dutty's ROM on my HD
This problem went away since i switched over to kwbr's Topix a while ago. It seems to be a result of some headphones having a higher sensitivity to others, so they interpret the same electrical signal into a louder sound, hence why HTC try to eliminate the problem by giving a set of headphones which are known to be the right sensitivity.
also, once i have the volume all the way i have it, how can i change the volume? when using the audio booster, the volume control no longer works
ASK768 said:
also, once i have the volume all the way i have it, how can i change the volume? when using the audio booster, the volume control no longer works
Click to expand...
Click to collapse
I don't understand your question.
However, when I use the audio booster, I can still use the volume buttons as usual. Do you have anything else installed that could be interfering with it? For example software to map buttons?
I think you should use WMP to play, easier to adjust the volume
Try using one of these:
http://www.mobilefun.co.uk/apple-iphone-stereo-handsfree-adapter-p15226.htm
Works well, microphone and answer button work, and has a volume slider so you can tweak volume as required.
Hi,
I'm wondering for a long time on how to change the individual volume of different functionality. For e.g. the Ring volume and Music Player volume.
I always want to set the ring volume to the maximum. And when i get into the games or Zune, and when i start adjusting the volume it should not bring down my ring volume. It happens that while i hear music i set the volume to 15 and i forget to raise it up again. I results in I missing some of the phone calls because the ring volume is also in 15. Can somebody help in this. THANKS!!!
Regards,
Praveen
That it currently not an option. The only volume on Windows Phone right now is Master Volume. :|
Hello,
I have a rooted z2 and I would like to know which values to modify in the mixer_paths.xml file in order to boost the in-call volume, could you please help with this ?
Things that I already did:
- make sure that volume is already at its max during call
- try music app and noticed loud and clear sound so the speakers are fine
- tried several apps to boost volume to no avail
I have attached the file, please feel free to suggest which lines to edit
This is a simple modification to the MTK Settings
It's tested in the following roms: (might work on 6.0 but not sure)
- Stock Rom
- Eragon V1
What it does, it enhances the headphone's sound to its full potential
All you have to do is:
1: Enable Debug Options (settings, about phone, press build version several times, go back to settings and there should be a new option there, open it and close settings).
2: Download MTK Engineering Mode from playstore.
3: After Installing it, Open it and select MTK Settings.
4: Go on Hardware Testing - Audio - Volume - Audio Playback.
5: On 3/4-pole Headset set the Headset PGA to 160 and save.
6: Test and see the differences ?
It's a really simple modification, but if you have any questions, feel free to ask ?
hi, I did that but volume is still too low for me (I'm hard on hearing).
do you know which file contains those values, I would like to set it higher than 160 (I'm rooted)?
nidjo83 said:
hi, I did that but volume is still too low for me (I'm hard on hearing).
do you know which file contains those values, I would like to set it higher than 160 (I'm rooted)?
Click to expand...
Click to collapse
you cant set to higher than that, and even if it could it would just degrade the speakers even more, causing to either malfunction or lose eveb more volume to a point of no returb... This is a modification to the earphones only, you can mess with the speakers and put on the max that the app allows, but thats it, anything above the limits will degrade the speakers.
Ruben Craveiro said:
you cant set to higher than that, and even if it could it would just degrade the speakers even more, causing to either malfunction or lose eveb more volume to a point of no returb... This is a modification to the earphones only, you can mess with the speakers and put on the max that the app allows, but thats it, anything above the limits will degrade the speakers.
Click to expand...
Click to collapse
thank you for your response!
sorry if I didn't make it clear; I was talking about earphones, not phone speaker. I want louder sound on my earphones!
I edited some volume file in vendor\etc folder, made headset PGA value to 250, but it didn't do anything...
nidjo83 said:
thank you for your response!
sorry if I didn't make it clear; I was talking about earphones, not phone speaker. I want louder sound on my earphones!
I edited some volume file in vendor\etc folder, made headset PGA value to 250, but it didn't do anything...
Click to expand...
Click to collapse
The 160 is the max volume.
So, if instead of applying for 3/4 pole Headset I apply it for Speaker label it will improve the sound on my Elephone speaker?
Mikystars said:
So, if instead of applying for 3/4 pole Headset I apply it for Speaker label it will improve the sound on my Elephone speaker?
Click to expand...
Click to collapse
it might enhance, but the sound quality is already bad.. enhancing it even more will mostlikelly cause even more distortion
One thing I've noticed is that the ringtone volume coming from the earphone part (top of phone) is a lot softer/quieter than the volume coming from the bottom firing speaker - now this is expected and normal I think, but here's the issue I've noticed - the ringtone volume coming from the top speaker is even more soft/quiet when an actual call is coming through compared to when testing it in Settings. Can anyone else confirm this? You can test it by covering the bottom firing speaker with a finger/thumb and listening to how loud the top speaker is when the ringtone is playing. Compare the sound/volume of the top speaker between:
1. when an actual call comes through
verses
2. testing it in Settings
Bump - can at least a few of the people who read this thread post their results? Thanks in advance.
I have checked and found that the volume is different like you said. In settings it's a bit louder then when receiving calls. It's as if the volume in settings is set to max. I did then changed the volume to max and now the sound seems to be at the same level in either situations. Maybe just check your call volume level
termdj said:
I have checked and found that the volume is different like you said. In settings it's a bit louder then when receiving calls. It's as if the volume in settings is set to max. I did then changed the volume to max and now the sound seems to be at the same level in either situations. Maybe just check your call volume level
Click to expand...
Click to collapse
Changing volume to max doesn't make a difference to the relative difference for me - that is, the volume coming from the earphone speaker is louder when testing in Settings verses when an actual call comes through.