I have a question..im using outlook on the PPC PE for my POP3 mail account. I can dl and receive messages fine, but the problem lies when im trying to send messages to domains OTHER than my POP3 domain. Example, i cannot send mail to hotmail or yahoo accounts at all. I get an "Invalid Message Recipient" error. Anyone familiar with this problem or could offer some advice? THanks in advance
Your ISP does not allow submissions from the Internet. If you change the smtp server to the one provided by your GPRS service provider then you should be able to send.
where to change ?? please can u tell me step by step how to
where to change ?? please can u tell me step by step how to do it
It sounds like that when you set up the new pop account in the inbox you ticked the verify user name with you online provider.
If this is the case the solution is
inbox tools options address (then deselect that service provider or add all the new one you wish to check.
Hope this helps
Many of the public email hosters block email if none of their domains are in the "To", "Cc" or "From" fields.
So probably you just need to enter "correct" e-mail address in POP3 service settings. E.g. if your e-mail is located on www.mail.ru - you need to enter [email protected] as your own address - and no mail will be blocked by smtp.mail.ru. Just thy to check "howto's" on your mail hoster website.
HOWTO: Sending mail through GPRS
In fact: they usually check whether one of their users is a recipient for the mail . For this they use the 'Envelope-to', which is what the remote mail server supplies in the SMTP protocol using 'RCPT TO:', and not a line from the mail (otherwise BCC would not work).
If not, they check whether the sending machine is on their network. They usually do this by IP-number, so putting the right mail address in the from line would not help.
So: you need to use the SMTP server supplied by your GPRS provider when sending mail, and not the SMTP server of your ISP.
this is a good thread.
After all, how can you set different usernames/passwords for both services for different ISP's
e.g POP (incoming) from PIPEX
SMTP outgoing using o2.co.uk
Without using two "services" set up on the xda. After all how much of a pain it would be to switch between them, remembering to click the white box on the pop service when you've sent from the other service... argghh.
Am I the only person that hates the way this is setup. Anyone tried a third party POP/SMTP program other than the Microsoft Pocket Outlook Inbox?
Hi,
I'm using PDAViet Transformer 1.1, which I just installed last night and it's working wonderfully. However, I have a question regarding Gmail IMAP. I have configured Gmail on my phone with server imap.gmail.com but when I receive a message and open it, it comes out with a blank page. In the real Gmail, this particular message has like 13 replies but it wouldn't show on my phone.
Do I need to install something else here? coz I read somewhere that it needs J2ME, which I dun think it's included with Transformer 1.1. Any help would be greatly appreciated.
Thx
It turns out that I'm not the only person who's having this problem... I guess it's not 100% implemented yet or still buggy...
http://groups.google.com/group/Gmail-POP-and-Forwarding/browse_thread/thread/38244ef044762d25
bankir said:
Hi,
I'm using PDAViet Transformer 1.1, which I just installed last night and it's working wonderfully. However, I have a question regarding Gmail IMAP. I have configured Gmail on my phone with server imap.gmail.com but when I receive a message and open it, it comes out with a blank page. In the real Gmail, this particular message has like 13 replies but it wouldn't show on my phone.
Do I need to install something else here? coz I read somewhere that it needs J2ME, which I dun think it's included with Transformer 1.1. Any help would be greatly appreciated.
Thx
Click to expand...
Click to collapse
You're actually referring to two different methods to get Gmail. Your first paragraph mentions setting up Gmail manually using IMAP settings. Your second paragraph refers to J2ME, which is required to run the Gmail java client that actually resides on your device.
You first need to be sure to "enable" IMAP by logging into your Gmail account from your desktop browser. Here is some more info on how to do that. Here is some general information on Gmail and IMAP settings.
*edit* I checked out the link you posted and did some more searching regarding that Gmail issue. It appears that most if not all WM users have that problem. They can see the email body when it's sent as text, but not if it's sent as HTML. One possible solution that I haven't seen anyone discuss is trying the java client rather than setting it up manually. You may just want to give that a try and see if that resolves the problem. They also have these setup instructions specifically for WM6.
Mines working fine...
In Outlook, set up a new account, enter user name, uncheck the box. Follow the instructions, and enter imap.gmail.com:993 and IMAP4 as the type,
smtp.gmail.com form the smtp sending. Both connections require SSL.
edit: Just realised I wrote exactly what the link above says...
Or just stick with the Java App, like i do. Works perfectly fine...
Will GMail ever work properly!
I made the mistake of moving my domain to googles hosted service.
All well and good but if you use WM, you are buggered.
The Java app doesnt work for this service ( called google apps or Gafyd )
You can use a dedicated app only on a Blackberry!
and finally get a decent way with IMAP and and and . of fik it. whats the use .
I will wait for things to improve!
Bhayani
I got it
I got it to work using the exact instructions for WM6
Windows Mobile 6
To configure IMAP for your Windows Mobile 6 device, just follow these steps:
1. Enable IMAP in your Gmail account settings.
2. Open the Start menu and select 'Programs' > 'Messaging' > 'New E-mail Account.'
3. Enter your Gmail username (including '@gmail.com') in the E-mail Address field.
4. Uncheck the box to get settings automatically from the Internet and select 'Next.'
5. Select 'Internet e-mail' as your email provider in the drop-down menu.
6. Enter your name as you want it to appear in sent emails.
7. Enter a descriptive name for the email account and select 'Next.'
8. Enter 'imap.gmail.com' in the Incoming Mail Server field.
9. Select 'IMAP4' as the Account type from the drop-down menu and select 'Next.'
10. Enter your Gmail username (including '@gmail.com') and password.
11. Select 'Next.'
12. Enter 'smtp.gmail.com' in the Outgoing (SMTP) Mail Server field.
13. Make sure that the 'Outgoing server requires authentication' box is checked.
14. Select the 'Advanced Server Settings' link.
15. Make sure that the 'Require SSL' box is checked for both incoming and outgoing emails.
16. Select 'The Internet' as the network connection from the drop-down menu.
17. Select 'Done' and then 'Next.'
18. Select how often you want your phone to send/receive emails from the drop-down menu.
19. For more download options, select the 'Review all download settings' link.
20. Select 'Finish.'
I put the bold around the item that I missed before when I configured it the first time. I don't know if this was the result of the change. But I can see the body of my messages now, so I'm happy with it.
I have a HTC Apache 6700 with windows mobile 6 running on it (thanks HEmi)
cdavis1962 said:
I got it to work using the exact instructions for WM6
I put the bold around the item that I missed before when I configured it the first time. I don't know if this was the result of the change. But I can see the body of my messages now, so I'm happy with it.
I have a HTC Apache 6700 with windows mobile 6 running on it (thanks HEmi)
Click to expand...
Click to collapse
I dun understand what you mean by put the bold around the item? how do you do that? care to share?
It's either you solved the problem or Gmail just recently improved their IMAP service. I haven't tried again...
Hey guys,
omni here with what should be a relatively easy question/fix...
There may be a post on this already, but I searched around for a good 10 minutes, and at least I know I'm in the right section (not spamming dev)
I have Yahoo! Mail liked through my MotoBlur Accounts so that it will show emails in my Universal Inbox (standard Messaging app). It works intermittently, and what is really strange is that when it ISN'T working (when it has the orange error/caution symbol over the syncing icon), the stored password under Accounts is randomly modified to a 20-ish character string (my password is much fewer characters). I can go back and change the password while its in the mood not to work, but it never seems to sync. Then I forget about it and it randomly connects later. As you can imagine, this gets quite annoying... I'm running GreyBlur 1.0 and SteelBlue 1.15 (compatible; the problem was happening long before layering this theme). I do move around campus alot, which switches to new wifi networks or to 3.5G.
So to sum up the question: how can I stop MotoBlur's Accounts/Yahoo! Mail from changing my password and losing connectivity (not sure which comes first/causes the other)?
Great thanks to this community's wonderful attitude and android wizardy!
-bump- (oh noes, its happened again!)
Bumpitty bump
Sent from my MB860 using XDA Premium App
Issue Summary
In order to improve security, Yahoo recently disabled non-secure (non-SSL) connections to their IMAP e-mail servers. As a result, customers with devices running the Android operating system may encounter errors when attempting to setup or access their Yahoo e-mail account via the device's native e-mail client.
Customers attempting to setup a Yahoo e-mail account for the first time will receive an authentication failed or similar error when using the automatic setup method (only e-mail address & password are entered).
Customers who previously setup a Yahoo e-mail account may receive an error or be unable to retrieve new e-mail messages.
Critical Must Know/Must Do
New users (or existing user attempting to add a new Yahoo/AT&T account): use the Manual Set up option to enter the required server settings.
Existing users: If their Yahoo/AT&T account stops syncing, direct them to Edit the account settings and enable SSL.
Server/Protocol - IMAP
IMAP/Incoming Server - imap.mail.yahoo.com
Security Type - SSL (or "secure connection" option)
Incoming Port - 993
Outgoing Server - smtp.mail.yahoo.com
Security Type - SSL (or "secure connection" option)
Outgoing Port - 465
To find out how to edit the settings go here:
https://www.wireless.att.com/answer-center/solutionDisplay.jsp?solutionId=KB116471
After following these instructions, hit the thanks button to show some love.
Thanks a hundred times over!
a) I'm not changing my server config.. being the internet, I'm sure some responders will attempt to go that route... Mail on my Sensation works just fine
b) not ready to switch to CM7 yet... I'd like to get this working on WebOS and try that for a few weeks.
So.. I want to configure my mail such that my acct is
[email protected]
So my linux box (call that incoming.com) aggregates my incoming mail from several sources, and runs an IMAP server... For outgoing mail, I *relay* thru the outgoing webhost (call that outgoing.com) b/c no one accepts mail from dynamic addrs anymore.
The Mail acct setup _seems_ to have all of the needed fields, but I can never get that page to allow me to "sign in" (the green box is always greyed out).. I always have to hit Back to the simple addr/pwd page.
and everytime I go back to that page, and enter my [email protected], it changes the incoming server to that.
I'm baffled.
I easily got this to work with the HTC Sense/Mail and with K-9 on Android.
thanks for any help,
Mike
Partial success...
Today.. and no idea why, the green "sign in" button finally was willing to become highlighted...
I can now see my incoming mail.. to do that I had to manually find and copy the certificate from my home linux box (TLS) to the Touchpad.. it was refusing to connect saying
the server's security certificate is not a trusted certificate
Click to expand...
Click to collapse
.. I've never had any other email client raise this objection.
Still working on the outgoing connection.. I use hostmonster as my webhost and outgoing relay... its having trouble
Outgoing Mail Server. The Server's security certificate is not valid for the domain
Click to expand...
Click to collapse
it looks like I need to get a copy of that self-signed certificate as well...
sigh.. is there any alternative email client? I'm not finding one in the app catalog... I've never seen any email client be this @[email protected]
Here I am asking this same old question again on yet another Android phone. Maybe I should just take a hint and get a phone with real exchange support yeah?
I have a Droid RAZR MAXX , about 30 minutes old.
Anyhow, apparently NO ONE uses exchange or I'm the ONLY ONE with this issue.
Press Settings
Press Accounts
Press Add Account
Press Corporate Sync
...
.....
What the **** am I supposed to do with just "Email" and "Password?"
Where am I supposed to enter my domain, my server, and the other options that go along with exchange?
Who approved this? This is even less usefull than just activesync, it doesn't work at all.
Anyone use exchange or understand where the mystery settings are?
**UPDATE** I THINK, I just lost about 80 IQ points when I found this. This could possibly be the saddest fail in exchange history..
https://motorola-enterprise.custhel...roid-razr-maxx-corporate-sync-email-settings?
Don't feel bad. I just returned a Galaxy Nexus because I was unable to get my Exchange account working. I figured out how to get all the info into the corporate sync settings and got excited when it said it worked. Alas, it refused to actually get any mail or sync any folders.
So I downloaded Touchdown. I was unable to even get that working with my Nexus. With the Maxx I still wasn't able to get it working with Activesync, but at least I can get it working with polling. I hate the idea of paying an extra $20 for Touchdown, but in the end I think it's probably worth it.
Wow. I knew the workaround, but had no idea they'd actually make that official. That's hilariously unprofessional. All the same, points to them for putting it up there when they knew people were having problems..
Sent from my XT910 using xda premium
Well.. So much for moto blur..
Sent from my XT910
What the heck are you complaining about? Just enter the email and password and it will try to configure on the basis of that. If it is not able to do that it will ask for the server and other info.
Szadzik said:
What the heck are you complaining about? Just enter the email and password and it will try to configure on the basis of that. If it is not able to do that it will ask for the server and other info.
Click to expand...
Click to collapse
Except when it doesn't, and just says it is unable to connect, offering no option to enter the server name. Have a look at the linked knowledgebase article.
Sent from my XT910 using xda premium
What is the section "Server settings" in Account settings for then? I am using the Exchange server on my RAZR from the first day I bought it. The corporate mail is excellent a reliable.
I set up the name of the server and login including domain name and password. The last option is proxy. That is all you need.
Wow... wish I'd known this before purchasing Enhanced Email. It's a nice program, but the only reason I needed it was because the stock mail program wouldn't let me set up my exchange email after the first OTA update from VZW.
Live and learn.
For some reason on the Maxx when you go into Corporate Account/Sync, there only 2 options
Email Address
Password
No other options are available. Menu button does nothing. Period. It wasn't until I stumbled upon the dumbest feature ever that I knew to use any current account that I have access to (NON EXCHANGE ONLY , i.e. YAHOO, HOTMAIL, GMAIL,) in order to get those options (Domain, server, etc, ) to appear so I could edit it.
Ludacris..
Some accounts work straight off the bat, others won't. Assume it's exchange version and server implementation to blame. The problem does exist, as evident by the Moto knowledgebase link in the OP, so he posts claiming people who can't set exchange up are missing something are, well, missing something themselves.
Sent from my XT910 using xda premium
onslaught86 said:
Some accounts work straight off the bat, others won't. Assume it's exchange version and server implementation to blame. The problem does exist, as evident by the Moto knowledgebase link in the OP, so he posts claiming people who can't set exchange up are missing something are, well, missing something themselves.
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
On what planet does it make any sense to to input a yahoo.com email address and password to trigger server setup, domain etc, for an exchange server? Just to make those options visible?
I could never, even on accident could do a worse job in designing this software. And I'm an idiot.
Corporate Email Autodiscover
I would suspect that the reason you're only prompted for the email address and password is that newer versions of Exchange can work with autodiscover, if properly configured. That's why when you set up an account in Outlook 2010, it asks for your email address and password to begin with. It goes out and looks for the information from DNS for your domain, and automatically gets the mail server information.
My RAZR works fine??? what's your deal
Hey i just opened a Droid RAZR MAXX and turned it on and set up my gmail account then set up my exchange 2007 account.
Here's how( maybe your doing it wrong):
- First Unlock the device's screen.
- Press home key as many times as you want, but more than 0.
- Press the settings button. Looks like 3 little lines on top of each other. It is just to the left of the little house button.
- Select Settings by touching the gear icon. - bottom left.
- Scroll down to accounts and press it. (accounts that is)
- At the very bottom touch the words "Add account"
- Now touch the little blue stamp icon that has the words Corporate Sync under it
- Enter your microsoft exchange account email address in the box that is for Email address:
- Enter your password in the box that is for Password.
- Click next on the bottom right of the screen.
Now your droid will try to connect to your companies exchange server.
If it cant it will allow you to put in server and domain information.
You have to be patient, it could be 30 whole seconds or so before it prompts you.
- Enter your companies domain name in the domain box.
- Enter your microsoft user account information in the name and password boxes.
- Enter the name of your mail server w/ the domain name at the end ie. mail.yourDomain.com
- click Next.
If you have your information correct it will work. Else check w/ your admins. If you are your admin... try again.
Ya i have been using exchange for several years with moto android phones with no connection issues. My Razr has worked fine, like stated in post im running exchange 2003 which does not offer auto config for phones, you might be running a newer version of exchange which does have auto config setup but not setup right? If your running exchange 2007 or up make sure the auto config settings on server are right because if there wrong it will fill in the wrong info and not let you enter your own server info.
Sorry to dig up this old thread, but everyone seems to be so hard core about searching for solutions before posting new threads. So I guess, better to dig up an old one.
I am having a variant of this problem. I am setting up Office365 for my company as a replacement for onsite Exchange2007. I set up a new domain just to have something to play with in test/dev. The domain I'm using is set up for the Autodiscover that a few people alluded to above, just requires a few new DNS records. It worked perfect on my Xperia Play with Android 2.3.3 that I had prior to the Razr. I just put my email and password in and boom it configured. Not so with the Razr, I don't know if this due to the Razr not using the stock Android email application or just the difference between 2.3.3. and 2.3.6.
I found this thread on the Office365 support site:
http://community.office365.com/en-us/f/160/p/25689/118705.aspx
While *I* can make that work, being an admin and all, I think it's probably way too confusing for our end users. I can imagine a greatly increased support volume should we have to go down that path with IMAP servers. Or using the Motorola method in the link closer to the top the thread, which would probably work fine for connection to the onsite Exchange server, but is more dicey on Office365 since there is no "server name" per se.
I can't imagine that this issue is going to go away. A lot of companies are moving to cloud email and Office365 is a popular choice.
---------- Post added at 04:51 PM ---------- Previous post was at 04:02 PM ----------
OK, I was able to get it working.
First, I logged into my Office365 account with a web browser, going to my inbox and then in the upper right hand corner hitting the question mark and then from the drop down menu choosing About. This is described in the link I put in my last post.
Then I went to log in using the Corporate Sync. It failed and then came back and asked me for the server name and domain. For the server information I put in the information from the Host Address field on the box that popped up from the Help-About box in the last step,
listed as: Host address: https://*********.outlook.com/owa but leaving out the OWA on the end. I left the Domain blank and entered my email account as the username, and re-entered the password (Important-it was failing before I re-entered the password.). Then it worked, came back and asked me to set a screen lock code. Yay!
Hope maybe this helps someone else.
As long as this thread was dug up (thank you BTW), I thought it important to update my situation from what I had in the 2nd post.
It turns out there was an Active Directory (AD) configuration error on my account. I figured this out by looking at the log from attempts to connect using Activesync. This lead me to the Touchdown support website which then linked to another website. Basically my account didn't have permission to create devices.
Fortunately I have a good relationship with the AD admins. I was able to configure email on my device without issue using another users credentials. This told me it should work with my accounts. So I sat down with the AD admin and we compared permissions on the 2 accounts till we eventually found the differences.
Once my account was fixed I was able to get Activesync working using Touchdown. Unfortunately I couldn't get Auto Discover to work, but manual setup worked fine. Then I set up my account using both the built-in email client and Enhanced Mail (bought it for 10 cents during Google sale). It worked fine on all 3. Even download Moxier. Turned out, of all the options, I liked the interface and options most using Touchdown so I stuck with that.
Motor's corporate email client makes one assumption I wish they would not make. They assume your Exchange administrator has properly setup autodiscovery. If autodiscovery is properly configured (that requires a proper autodiscover.domain.com address) all you need is your email address and password and everything will work. This is a really bad assumption as most people who set this stuff up are idiots.
That said, after a failure to use autodiscover the client should eventually fail to a manual setup screen for server name, domain login etc.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
wingdo said:
Motor's corporate email client makes one assumption I wish they would not make. They assume your Exchange administrator has properly setup autodiscovery. If autodiscovery is properly configured (that requires a proper autodiscover.domain.com address) all you need is your email address and password and everything will work. This is a really bad assumption as most people who set this stuff up are idiots.
That said, after a failure to use autodiscover the client should eventually fail to a manual setup screen for server name, domain login etc.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Click to expand...
Click to collapse
I do have autodiscovery properly set up for my Office365 domain, it's no longer optional. Not even your Outlook client will connect to Office365 Exchange without autodiscovery working. As I mentioned before, there's not a server name in the traditional sense. Obviously, you can find A server name in the help-->about information when you are logged into the OWA version of Office365, but you couldn't drop that server name into a traditional Outlook setup and have it work.
My domain autodiscover works with other phones. In fact I just added a Windows Phone7 device to it last night and all I had to do was enter the email address and password. I pulled my Xperia Play out of a drawer last night and put it on the charger. It's been factory wiped and I'm going to run through the setup for my Office365 domain on it again. I just got busy doing other things last night like working out and watching the basketball game
Work Around for adding Corp Sync Account without using Touchdown
i had this problem when i went to create a Corp Sync account and did not see a place to type in the Server name ....there is a "work around" for adding a Corporate Email account without using Touchdown... type in your gmail account information let the app verify the account... once it is verified you can go back and modify the account ... you "should" see a box to type in webmail.ihostexchange.net...
Wow my iq dropped by reading this noob thread. Just open the email app click add account select other enter your email and password then press manual setup enter your domain and server your good to go it automatically syncs contacts and calendar.
Sent from my DROID RAZR using xda premium