WM6/Crossbow Prophet Info - JAMin, XDA Neo, S200 ROM Development

Hi,
To stop all the questions/threads/shouting for links.
NO WM6/Crossbow stuff on the XDA FTP server, it will be removed as per M$ legal departments request.
To stop the gossip:
1. Yes, the ROM in doing "the round" with some prophet ROM maker(s)
2. No, I will not (yet) upload a WM6/Crossbow ROM on the FTP server
3. Yes, I will release a proper(ish) WM6 Crossbow ROM in English for the prophet at some point in time.
A general warning, there are versions out there that will brick your phone if you don't know what you are doing.
If you want to "risk it" fine, but don't come crying when it goes wrong.
Better wait for a proper "prophet wm6 beta release" coming soon
Ok, info:
- the WWE version going around (yes the orwell version) works on the prophet but has the following problems (i'm still checking so this list will get bigger)
1. No audio
2. The screen setup is in landscape mode (you can switch to portrait after the setup)
3. no ext. rom installation (it doesn't start even after hard reset)
4. you need to have activesync 4.5 for it to work (beta 2 avaiable on ms site here)
http://download.microsoft.com/downlo...cf6c/setup.exe
5. battery problem, it doesnt charge nor does it know anything about the battery status.
6. no camera software
7. buttons are mapped wrong
8. screen goes to landscape after softreset
I can confirm you can go back to another ROM and it doesn't "mess up" or lock your radio ROM (using the orwell version)

Prophet Crossbow
Hi Jester! I have a G4 prophet now I have a few questions.
1. Is there any Crossbow rom at the moment that will work on the Prophet?
2. Does the Prophet have to be CID-Unlocked to work with Crossbow
3. Is it possible to CID-Unlock a G4 Prophet?
Sorry if it are stupid questions
Thank you

rvbcrs said:
Hi Jester! I have a G4 prophet now I have a few questions.
1. Is there any Crossbow rom at the moment that will work on the Prophet?
2. Does the Prophet have to be CID-Unlocked to work with Crossbow
3. Is it possible to CID-Unlock a G4 Prophet?
Sorry if it are stupid questions
Thank you
Click to expand...
Click to collapse
1. yes (with problems...but might be fixable)
2. can't verify right now, but looking at it, looks like it needs to be unlocked
3. yes, for now using a pay service, people are working on a free solution, but that will take time.

Ok to be a little more specific, is there already a crossbow rom available? or are you working on one and is there a possible release from you in the near future..
I mean, I have downloaded a few roms, and I'm a little bit afraid to try them all..

rvbcrs said:
Ok to be a little more specific, is there already a crossbow rom available? or are you working on one and is there a possible release from you in the near future..
I mean, I have downloaded a few roms, and I'm a little bit afraid to try them all..
Click to expand...
Click to collapse
*hands you glasses, read the first post again please*

Ok got it working now, on a G4 CID-LOCKED!! Prophet I used the CopyToFFS methode instead of the Update-NoId tool! Damn it's hot!! got some problems with sound but I think Jester will fix this all for us! good night all!

yep theres no need for cid unlock on a g4 model , working for me too

Well pals ur brave And did you try to downgradge yet?Is there some radio lock now? I did'nt try this cause i have some casses to think that 3.5 rom is coming soon

cr0ssy said:
yep theres no need for cid unlock on a g4 model , working for me too
Click to expand...
Click to collapse
Did you guys use the orwells1984 file?

Jesterz said:
3. Yes, I will release a proper(ish) WM6 Crossbow ROM in English for the prophet at some point in time.
Better wait for a proper "prophet wm6 beta release" coming soon
Click to expand...
Click to collapse
Don't try anything yet guys... just wait for a proper release from Jesterz !!!
Thanks for your work

Ok, info:
- the WWE version going around (yes the orwell version) works on the prophet but has the following problems (i'm still checking so this list will get bigger)
1. No audio
2. The screen setup is in landscape mode (you can switch to portrait after the setup)
3. no ext. rom installation (it doesn't start even after hard reset)
4. you need to have activesync 4.5 for it to work (beta 2 avaiable on ms site here)
http://download.microsoft.com/download/f/b/b/fbb3d5eb-53f5-4dbc-bbea-d06dd623cf6c/setup.exe
5. battery problem, it doesnt charge nor does it know anything about the battery status.
6. no camera software
7. buttons are mapped wrong
8. screen goes to landscape after softreset
more later

Jesterz said:
Ok, info:
- the WWE version going around (yes the orwell version) works on the prophet but has the following problems (i'm still checking so this list will get bigger)
Click to expand...
Click to collapse
Isn't that version supposed to be for the Wizard?
Mike

MusicMike said:
Isn't that version supposed to be for the Wizard?
Mike
Click to expand...
Click to collapse
duh, yeah, but thats the only thing we got at the moment, so we are going to try to adapt it for the prophet.

Jesterz said:
Ok, info:
- the WWE version going around (yes the orwell version) works on the prophet but has the following problems (i'm still checking so this list will get bigger)
1. No audio
2. The screen setup is in landscape mode (you can switch to portrait after the setup)
3. no ext. rom installation (it doesn't start even after hard reset)
4. you need to have activesync 4.5 for it to work (beta 2 avaiable on ms site here)
http://download.microsoft.com/download/f/b/b/fbb3d5eb-53f5-4dbc-bbea-d06dd623cf6c/setup.exe
5. battery problem, it doesnt charge nor does it know anything about the battery status.
6. no camera software
7. buttons are mapped wrong
8. screen goes to landscape after softreset
more later
Click to expand...
Click to collapse
2,7,8 are problems that have been solved with other roms ported from wizard. (So I believe that there won't be a problem here)
4,6 are no big deal to fix (there is a hidden camera shortcut in the windows folder)
So the severe problems are 1,3,5.
Is the charging problem the same as the aku 3.x you where working on?
Could it be easier to fix than the 3.x?
Good luck to you mate

Jesterz said:
Ok, info:
- the WWE version going around (yes the orwell version) works on the prophet but has the following problems (i'm still checking so this list will get bigger)
1. No audio
2. The screen setup is in landscape mode (you can switch to portrait after the setup)
3. no ext. rom installation (it doesn't start even after hard reset)
4. you need to have activesync 4.5 for it to work (beta 2 avaiable on ms site here)
http://download.microsoft.com/download/f/b/b/fbb3d5eb-53f5-4dbc-bbea-d06dd623cf6c/setup.exe
5. battery problem, it doesnt charge nor does it know anything about the battery status.
6. no camera software
7. buttons are mapped wrong
8. screen goes to landscape after softreset
more later
Click to expand...
Click to collapse
1 6: I had solved in Chinese Version WM6. Just change dll driver.and copy file(The camera needs almost 58 files)
3 4: It's not important
2 7 8: They are same problem. The keyboard driver wrong.I have no idea now.
I think the related drivers are hidparse.dll kbdhid.dll keybddr.dll.
5: It's the big trouble. I think the related drivers are battdrvr.dll usbfn.dll. I changed battdrvr.dll using 818PRO's driver.The battery status is ok. But charging still need soft reset.
The aku 3.3 rom from 838 solved problem 2 7 8. Anybody know some about it?

andrew_sh said:
2,7,8 are problems that have been solved with other roms ported from wizard. (So I believe that there won't be a problem here)
4,6 are no big deal to fix (there is a hidden camera shortcut in the windows folder)
So the severe problems are 1,3,5.
Is the charging problem the same as the aku 3.x you where working on?
Could it be easier to fix than the 3.x?
Good luck to you mate
Click to expand...
Click to collapse
how did you solve the 2 and 8
thx....

digifan said:
how did you solve the 2 and 8
thx....
Click to expand...
Click to collapse
I didn't do it. I think the people at pdamobiz did it. It must be a registry setting

riverzhou said:
5: It's the big trouble. I think the related drivers are battdrvr.dll usbfn.dll. I changed battdrvr.dll using 818PRO's driver.The battery status is ok. But charging still need soft reset.
Click to expand...
Click to collapse
Could the battdrv.dll from the htc artemis work? It almost has the same board as the prophet.
what do you think?

wm5 vs wm6
WM5 vs WM6
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
wm5 aku2.2 pool size 12mb was tweaked with sktools&tweak2k for max performance.

well yeah your screenshot that theres basically no difference and its still 5.2 or something so worth it only out of interesst
and the wizard rom didn't work on my g4 cid locked model

Related

.:-= 22.05.07 UPDATE -=- ver 004.4 -=- CHARMER WM6 WWE ROM by vlodeck & nocturne =-:.

.:-= 22.05.07 UPDATE -=- ver 004.4 -=- CHARMER WM6 WWE ROM by vlodeck & nocturne =-:.
[size=+5]CHARMER WM6 WWE​[/size]​​​
T-mobile does not care about devices they sold us. They are not supporting WM5, almost useless in the way they have implemented them in your devices. So we expected no support for WM6. We made it ouselves. Two people in the main team, lot of others providing support, feedback and knowledge. That is called the community. And finally, after lot of problems, we have working Windows Mobile 6, better, more stable and faster thany any previous WM5 ROM.
ROM MANIFEST
Vlodeck and me, nocturne.op.15 - we are the main team. We are creating this ROM in our free time, for no wage and with no support from vendors. We are providing this ROM "as is". We do it as good as we can, but you will find bugs. Report them and we will try to fix them in the next ROM or provide help. But we cannot take any responsibilities for it. If you damage your Charmer, do not be angry - you made something bad. We will never release anything that may damage the machine, we will never release something that is not working. It's just your fault - and it was your choice to try it.
Simply take what we provide or leave us alone. Or make your own ROM as you wish - we will be happy if you will find our rom to be good enough for your cooking.
HISTORY and FUTURE
We were not the first who released WM6 ROM for Charmer. chinese xBeta was the first. We are sorry that we cannot provide full credits of chinese stuff, but we do not understand even a word on their pages But our WWE rom was built primary on the chinese one. Vlodeck had enough patience that he started to translate CHS rom to WWE using Altavista Babelfish. We have discovered soon that it wasn't the right way.
Now, the ROM is working. Based partialy from Wizard, partialy on Prophet WM6 WWE roms, mixed up with chinese xBeta parts - it works. We have changed the main source ROM completely few times - that's why there are also major differences between versions. Different sources are bringing different problems. But we are strictly focused on performance and stability - on fast and stable ROM, you can easily build your own custom ROMs, filled with junk as you wish.
That's also reply for questions "will your rom include...blah blah" - no, it will never include any 3rd party product. We are not able to control every dll of sources, but we will try to keep this ROM maximaly clean and fast. Performance tweaks will be included, but only tweaks that may not harm any part of system. We will make everything possible to allow all 3rd party products work without restrictions - so no hardcore system tweaks.
CREDITS
Thanks to following people for sharing their knowledge, tools and ROMs:
xBeta team - provided proof that WM6 on charmer is possible
Bepe - without his tools and advices, making of ROMs should be impossible
smart1 - source ROM
anichillus - source ROM
faria - source ROM
mUn - source ROM
Martie - excellently and preciously made ENG and GER guide for flashing
Separate thanks for:
* all OEM packages creators
* all unknown developers for their well known tools
* xda-developers server for beeing the most usefull knowledgebase
I want to apologize if forgot to mention someone. We have lot of work ahead and behind us, hours of registry editing, looking for issues and their solutions - and also hours flashing and coffee making
[size=+2]VERSIONS[/size]​
Just working stable versions will be listed. Some of them will never be released. Numbers will not be complete. Do not ask for missing numbers - those are devil numbers, ROMs that were not OK... You need at least bootloader ver. 2.xx to upgrade to WM6.
Latest ROM
004.4 - http://rapidshare.com/files/32708502/charmer_wm6_vlono_004.4.zip.html
Older versions
004.2 - http://rapidshare.com/files/32079043/charmer_wm6_vlono_004.2.zip.html
002.5 - http://rapidshare.com/files/32074387/charmer_wm6_vlono_002.5.zip.html
001.1 - http://rapidshare.com/files/32068816/charmer_wm6_vlono_001.1.zip.html
To upgrade rom just extract rar and run RUU. It would be nice if you had your charmer cid-unlocked but I think it will work on locked devices as well. This method does not work on Vista. If you have it, proceed with ANOTHER FLASH METHOD.
CHANGELOG
004.4 changelog:
- added Voicedial
- Windows Live works
- added Transcriber
- multilanguage phonepad
- added Softkey Applet
- camera and voicedial buttons are working
- minor internal changes
- hope mms will work (i cannot use it on my work phone)
- Java Midlett Manager added
KNOWN ISSUES :
- you still need the battery fix to charge using usb synch cable
- contact and calendar buttons are hardcored, no remapping possible for now
- IE does not support homepage
[size=+2]ADDONS[/size]​
PhonePad SIP - http://rapidshare.com/files/32326885/Phone_Pad_-_International.CAB.html
Battery fix - enables USB charging:
1) download the fix from http://rapidshare.com/files/29790962/xBeta_XDADev_BatFix.CAB.html
2) at least soft reset your device (i have performed HR to have clean system for valid testing results)
3) install the patch - DO NOT MAKE SOFT RESET!!!
4) press and hold power button until message "Device will be off..." appears
5) tap OK to turn the device off
6) power on your charmer, it should work normally since this - at least mine does
mUn's keyboard - http://rapidshare.com/files/28801230/msim.96.dll.0409.mui
just copy it to /windows
Do it on your own risk! We take no responsibility in case you damage your device.
ANOTHER FLASH METHOD :
If you have the chinese WM6 rom, downgrade to some WM5 with official RUU, then:
download this:
http://rapidshare.com/files/29098553/ShellTool_bugfixed.zip.html
Once you unpack it, please put the nk.nbf (charmer wm6) into the Shelltool folder. Open shelltool.exe. Click Get Rom info, then click Extract OS. Wait until its finished and you'll receive a file called 8004000-OS.nb (save it for later).
Download the xbeta Chinese WM6 rom : http://rapidshare.com/files/27671349/2007-03-26_Charmer_WM6_CHS_OS_msyh__plus_consam_xBeta.exe.html
Extract it and put that 8004000.OS you saved before in the XBETA directory. In the itsutils folder of xbeta rom you will find enablerapi.cab and cert_spcs.cab. Copy them to your device, install them on Device Memory, then soft reset.
run xbeta.cmd and choose the 8004000OS.nb file to flash (you should be connected with AS and have your radio module turned off).
When the screen goes green and the flashing is finished make a HARD RESET!. Press Camera and Voice Dail buttons (hold them). Put and hold the stylus in reset button for 2 seconds. Release it. Wait until you see some white fonts on black screen. Then release those 2 buttons. Push the green dial button.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It's really work for CHARMER???
You dont have problems with reading, do you? Of course it works.
Hi!
Means WWE this upgrade is including german language, too?
smou said:
Hi!
Means WWE this upgrade is including german language, too?
Click to expand...
Click to collapse
WWE - World Wide English. So no, this does not include german.
Sorry, i thought WWE means World Wide Edition...
I'm sorry.
nice work. tho a few things ive noticed, the buttons control panel contains settings to map 6 buttons (5 plus 1 to hold) when it should only contain 5 (4 plus 1 to hold) and the actual buttons on the phone, contacts and calender are set to start and ok, also are unmappable using the cpl. also youve left in the wireless lan cpl, when the charmer doesnt have wifi!
I know I have, what's the point in deleting wifi icons? More work and how is it supposed to make the rom better?
dave106 said:
contacts and calender [button] are set to start and ok, also are unmappable using the cpl.
Click to expand...
Click to collapse
There's no way to change the mapping back to 'classic function' a.k.a calender=calender and so on?
youser said:
There's no way to change the mapping back to 'classic function' a.k.a calender=calender and so on?
Click to expand...
Click to collapse
I'll see what I can do.
vlodeck said:
You dont have problems with reading, do you? Of course it works.
Click to expand...
Click to collapse
Please uploading the pictures
Hi there,it seems to be a good work but.. I cannot update my charmer.All things go fine but after the automatic reboot my charmer boot up with the prec. Rom and seems only to have performed an hard reset.
Any suggestion ??
Oszi said:
Please uploading the pictures
Click to expand...
Click to collapse
madkoe said:
Hi there,it seems to be a good work but.. I cannot update my charmer.All things go fine but after the automatic reboot my charmer boot up with the prec. Rom and seems only to have performed an hard reset.
Any suggestion ??
Click to expand...
Click to collapse
you have to extract the nb file from the nbf and use for example awizard to flash the rom.
gosh.. Please send me additional info in a pm if you can.. I've never did that , and i'm afraid to do something wrong.
thanks
vlodeck said:
you have to extract the nb file from the nbf and use for example awizard to flash the rom.
Click to expand...
Click to collapse
Hi there. Thanks for this much awaited update.
I had the same problem as madkoe.
Don't understand the above. How do you extract the nb file from the nbf. Could you please post more information on how to do this.
Thanks.
The first post now includes another flash method.
Hi, sorry to be a pain, but the new file you just posted; rapidshare says file does not exist.
help!
damac said:
Hi, sorry to be a pain, but the new file you just posted; rapidshare says file does not exist.
help!
Click to expand...
Click to collapse
works now.
In the process of Flashing. Will update how it goes. Fingers crossed
Yeah!!! Flashed and working great. Three Cheers vlodeck. Thank you very much.
Although, the T-mobile customisations that I used to get on hard resetting the previous ROM, they still start, and the keyboard still looks yukky, no colours, just plain white with black text, will try to change with the keyboard enhancement provided in the first thread.
Rest everything looks perfectly fine. Very excited to use this

WM6 Crossbow PDAViet ROM

Hello all,
mr. Cloudyfa asked me to make a new thread with links for this new Rom, so here they are:
Link download:
- Step 1: Uploading Prophet PDAViet Temp, you can use AKU 2.20 NVID instead http://rapidshare.com/files/32728615/Prophet_PDAViet_Step1.zip
- Step 2:
Prophet 4.0.0.0.1 PDAViet: http://rapidshare.com/files/32714434/WM6_Prophet_PDAViet_v4.0.0.1.zip
or
Prophet 4.0.0.0.2 PDAViet: http://rapidshare.com/files/34250187/WM6_Prophet_PDAViet_4.0.0.0.2.rar
or
Prophet 4.0.0.0.3 PDAViet: http://rapidshare.com/files/34593392/WM6_Prophet_PDAViet_4.0.0.0.3.zip
Prophet 4.0.0.0.3a PDAViet: http://rapidshare.com/files/37163260/WM6_Prophet_4.0.0.0.3a_PDAViet.zip
Password: PDAVIET
If you ask for my oppinion about this Rom, i must say that at the moment (22.05.2007) this Rom is the best of all WM6 Rom. there are no issues that i find out. But i'm only a normal user.
if you has more experiencies please share
Cloudyfa said:
ROM CrossBow for Prophet
4.0.0.0.1 PDAViet​
Feature:
- PIM Backup 1.9
- BatteryStatus 4.02 build 206
- CommManager 1.6 (9 buttons)
- X-Button 1.5
- SIM Manager 6.10
- Macromedia Flash ActiveX 6
- New psShutXP Skin
- get rid of Voice Command, WindowsUpdate, MarketPlace
- fix error messages when working with SPB Backup
- fix Word Suggestion
- fix Model (PM300)
- fix IR
Optimized Registry!
......
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Link download:
- Step 1: Prophet PDAViet Temp
- Step 2: Prophet 4.0.0.0.1 PDAViet
Password: PDAVIET
@All: Don't install HTC_Camera_4.03 because it makes your battery drain faster !
@John-Wu, Wantoknow, Tom_codon: Nice to meet you here
Click to expand...
Click to collapse
PhamQuang said:
ROM v4.0.0.0.2 WWE for HTC Prophet​
Main features:
- based on v.4.0.0.01
- change to MS Office 2007.
- add Coreplayer, Zip,...
- add Theme Windows Green and change keyboard layout
- ...
Click to expand...
Click to collapse
Cloudyfa said:
ROM CrossBow for Prophet
4.0.0.0.3 PDAViet​
main features
- BatteryStatus 4.02 build 210 (ExtROM)
- Wm5torage 1.74 RC4
- MsOffice 2007
- HTC GIF Animator
- MIDlet Manager 11.1.7.1023
- delete Recent Programs after softreset
- change phone pad skin
- fix DEFBROWSER
- 8Mb PagePool
... Rebuild OS!
Click to expand...
Click to collapse
Wantoknow said:
PROPHET 4.0.0.0.3a PDAViet​
1- main features:
- based von 4.0.0.0.3
- Pagepool back to 4MB
- add OneNote Mobile
- add PV ATM Directory 1.4 (Ext_ROM)
- change ringtone
[/B]
Click to expand...
Click to collapse
other PDAViet's Rom:
version 1.1:
http://rapidshare.com/files/32493762...AViet_v1.1.zip
password is the same.
all ROMs (accept 4.0.0.0.3 because of 8MB Pagepool):
- over 31MB free memory
- fast
- stable
- Wifi, IR, BT works
Hi,
Does it still have the same blue splash screen and default keyboard?
Thanks.
Can you tell us what about language ans know issues
Thanks !
My quick review.
After install the ROM it happens to me that the screen looks different that ur screen. I can't see any BatteryStatus, I have to set "Menu" by myself (it shows only Today and Shutdown).
The Autorun.exe and Config.txt have never been activated. That may be the reason.
I pressed Camera + Comm buttons while doing hard reset.
Looks like it is too clean for me. But if the Config.txt file can be activated I can install something such as PDF reader and HTC Zip by myself.
Please suggest what happen to my installation...
Thanks.
Hi all
Is it for all versions G3,G4, the password issue after reset solved or not , the batteries drain still the same?
so far so good wifi works blutooth works seems fast and stable defo best so far on the wm6 roms nice one thanks.
can someone tell me in this rom in regional settings, is "Hungarian" in the list of the countrys/languages?
thanks
I just installed the PDAVIET 1.1 version this afternoon and spent hours to get my applications re-installed and reluctant to jump to something new unless the improvement is obvious.
Can someone tell me other than the CommManager 1.6 which has 9 buttons, what are the major difference between the two?
I installed CommManager 1.5 which has 10 buttons (one for VOIP phone).
Regards,
Yesterday did I install the rom pdaviet PV 1.1, and today I have installed this one, he was mentioning on John-Wu that were almost equal but that this one was spending less battery, but it seems to me that he is the other way round, to me I believe that battery was spending less the version 1.1, someone more has noticed it? or am I wrong?
What me goes better in this one is the wifi, it gets connected very fast and goes better.
GPS, Ok, BT OK
Thank you
kremo said:
can someone tell me in this rom in regional settings, is "Hungarian" in the list of the countrys/languages?
thanks
Click to expand...
Click to collapse
The answer is YES ^^
jychan28 said:
Can someone tell me other than the CommManager 1.6 which has 9 buttons, what are the major difference between the two?
I installed CommManager 1.5 which has 10 buttons (one for VOIP phone).
Regards,
Click to expand...
Click to collapse
The VoIP button hasn't functioned well so that i didn't add it in Commanager. If you want to config VoIP, run SipConfig.exe in Windows directory!
tiggerbcn said:
Yesterday did I install the rom pdaviet PV 1.1, and today I have installed this one, he was mentioning on John-Wu that were almost equal but that this one was spending less battery, but it seems to me that he is the other way round, to me I believe that battery was spending less the version 1.1, someone more has noticed it? or am I wrong?
What me goes better in this one is the wifi, it gets connected very fast and goes better.
GPS, Ok, BT OK
Thank you
Click to expand...
Click to collapse
Look like they're the same but 4.0.0.01 PDAViet has better Optimization and OS. I recommend you to use 4.0.0.0.1 PDAViet version!
Cloudyfa said:
The answer is YES ^^
The VoIP button hasn't functioned well so that i didn't add it in Commanager. If you want to config VoIP, run SipConfig.exe in Windows directory!
Look like they're the same but 4.0.0.01 PDAViet has better Optimization and OS. I recommend you to use 4.0.0.0.1 PDAViet version!
Click to expand...
Click to collapse
Ok thanks Cloudyfa for answering, me the truth me works very well quite. Am I commented by a friend who with the free hands earphone BT a lot of noises when it separates a little, has anybody proved it?, I the fact is that I cannot prove it because I have no earphones bt
Very good your rom, I like very much
Thanks for your work
Cloudyfa said:
The answer is YES ^^
Click to expand...
Click to collapse
thank you!
Great Rom, installed it today and I really like most of the features, speed and it all seems to work fine.
The only thing that annoys me is the pshutdown..is there any way to disable it? When I choose shut down it just turns of my display.
JoHoeller said:
Great Rom, installed it today and I really like most of the features, speed and it all seems to work fine.
The only thing that annoys me is the pshutdown..is there any way to disable it? When I choose shut down it just turns of my display.
Click to expand...
Click to collapse
In windows directory rename the file PowerOffWarnig.exe to PowerOffWarnig_old.exe and rename PowerWarnig.exe to PowerOffWarnig.exe, I use Resco Explorer for this operation.
Grettings
I just tried smart1 v3, mobizpda fantastic v2.0 ac2, and now pdaviet 4.0.0.0.1.
I have to say, pdaviet is the keeper. Too many small little bugs in smart1 v3, mobizpda was full of "junk", and now the pdaviet rom seems clean and no major bugs to report so far. I'll report back in a few days...
excellent ROM!
just flashed this ROM, everything works well.
MSN Live seems still can't work, only on me or...?
Does anyone can provide me with "HTC Audio Manager v1 b 1023.618" program?
I'm used to listen to music via this program, thanks.
anyway, thanks Cloudyfa, you did a fantastic work!
--- update ---
Windows Live Messenger is only not work on me... because I installed Mobem CE-StarR3 for Chinese read/write.
Seems CE-Star is conflict with Live Messenger.
Nut110 said:
My quick review.
After install the ROM it happens to me that the screen looks different that ur screen. I can't see any BatteryStatus, I have to set "Menu" by myself (it shows only Today and Shutdown).
The Autorun.exe and Config.txt have never been activated. That may be the reason.
I pressed Camera + Comm buttons while doing hard reset.
Looks like it is too clean for me. But if the Config.txt file can be activated I can install something such as PDF reader and HTC Zip by myself.
Please suggest what happen to my installation...
Thanks.
Click to expand...
Click to collapse
My ExtRom install without a problem. To run your ExtRom, you need to downgrade to AKU2.2 or below, then upgrade to this rom.
JoHoeller said:
Great Rom, installed it today and I really like most of the features, speed and it all seems to work fine.
The only thing that annoys me is the pshutdown..is there any way to disable it? When I choose shut down it just turns of my display.
Click to expand...
Click to collapse
If you don't like this feature, use this cab to restore it (u still can use psShutXP via "Shut Down")
Have fun!
It is very stable and fast thanks to all.
But I have one issue: To change Theme on today screen it did not work with out reset.
Thanks to Cloudyfa
Just upgraded this morning, everything is perfect and the preinstalled program really fit my needs.
Compare with smart1 v3, I personal think this one is better.
Once again, thanks to your hard work

(Jan 14, 2008) 5.2.1933 NLD Non-Official 3.13.3.0 (Dutch)

I created a copy of my 3.13.2.0 for Wizard and used it for the Prophet hope you enjoy it.
I tried to keep the ROM as original as it is... so this is my result of keeping it that way.
First of all its:
G4 Safe
No IPL/SPL
No Radio
(Still need to create a version without Extended ROM)
Included:
Splash
OS
Extended ROM
Before you begin... flash back to a original ROM or a good base (for a clean start).
Read this thread for upgrading.
Download the 3.13.3.0 for Prophet (RAPIDSHARE).
Windows Live Messanger Fix in my 3.13.2.0 thread
First install the "Windows Live 10.6.33.0600 (Fixed).zip" and then run the reg fix.
SYS:
5.2.1933
Pagepool 10MB
OEM:
ClearVue PDF v2.42
ArcSoft MMS 3.5 - NLD
Cyberon Voice Speed Dial 1.2 - NLD
Intent Java MIDlet Manager 11.1.7.1029 - NLD
HTC Camera 3.0 - NLD
HTC CommManager 1.3 - NLD
HTC Networkwizard 1.0 Build 29982.1.0.1.7 - NLD
HTC SAPSettings 2.02 - NLD
HTC Taskmanager 1.5 - NLD
HTC ZIP 1.11 - NLD
Office Mobile 2007 - NLD
Windows Live 10.6.0028.1100 - NLD
Windows Media 10.3 Build 17944 - NLD
Other:
HTC Ringtones
Themes:
Guava Bubbles (default)
Windows Mobile Green (default)
Windows-standard (default)
HTC_default
HTC_draven
Bugs/Missing:
Windows Live Messenger doesn't want to connect, it does after the bug fix.
Device info says WIZA200 instead of PM300
Suggestions are very welcome...
Build from:
(Wizard) Qtek 9100
3.13.2.0 ROM for the a SYS part and OEM Apps.
(Prophet) Qtek S200
Coffie ROM NLD for the XIP, OEMDrivers and a SYS part
Screenshot from Wizard 3.13.2.0 (it's almost the same accept for the BUILD)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​Thnx 2:
Gullums Coffie ROMS
Everybody from XDA-Developers who helped me out
Everybody from XDA-Developers who made it possible with their nice tools
The developers from HTC for using their ROM's for my cooking purposes
A shame its Dutch, as it looks really great.. Would like to try it but i do not understand Dutch..
Da9L said:
A shame its Dutch, as it looks really great.. Would like to try it but i do not understand Dutch..
Click to expand...
Click to collapse
Their are a lot of English ROM you could try... maybe someone is nice enough to build one in English.
Da9L said:
A shame its Dutch, as it looks really great.. Would like to try it but i do not understand Dutch..
Click to expand...
Click to collapse
Yeah I would too really like to try English version!
hikkss hikss..waiting for english version
Waiting for english version ! ! !
It constant finishes up flashing.
Than it enters the bootloader, after 'factory defaults/ fat thingies/ hard reset'
It just always pops up the three colored screen.
Have flashed several WM6 roms, never happened Hmm...
*EDIT*
Did the old-upgrade method, no HARDSPL. Stupid me. HardSPL method works, my bad.
Looks good / ziet r goed uit! Will post comments after few days use.
Draven, congrat's!
You delivered the 'perfect rom' for me.
The first ROM which is 100% bugfree, and really feels like a factory-rom.
Much faster than WM5, and some things I immediately find:
- Messages starts in account-chooser, like it should (not much WM6 roms do this, annoying since I use it a lot and have 3 accounts)
- Wifi perfect working, synchronising exchange in a minute
- GPRS working
- Smartdialing perfect
Euh, no strange things. Gonna keep this one! Maybe, i will strip it a bit coz 10MB free space is not much, a lot of progs I don't use.
Well done!!!
U wordt zeer, zeer bedankt (Y)
Ok ok... I'll try to find the time to create a English version.
draven187 said:
Ok ok... I'll try to find the time to greate a English version.
Click to expand...
Click to collapse
Perfect.. And thank you.. Your rom looks really god and i would like to try it !
My screen doesn't react while tapping on it.
This happens when I start messages (berichten) from the start menu. The account chooser will be shown and the screen stops reacting on taps.
Does anybody of you have this problem?
Hmm, after soft reset, losing all settings like GPRS / Wifi / Emailaccounts and the Exchangeserver password servername seems still present
Is it fixable?
Riel said:
Hmm, after soft reset, losing all settings like GPRS / Wifi / Emailaccounts and the Exchangeserver password servername seems still present
Is it fixable?
Click to expand...
Click to collapse
How do you soft reset ?
Riel said:
Hmm, after soft reset, losing all settings like GPRS / Wifi / Emailaccounts and the Exchangeserver password servername seems still present
Is it fixable?
Click to expand...
Click to collapse
First, don't soft reset using the stylus, but just restart using the on/off button.
to repair the emailaccount use this:
Hmm, interesting!
Now I did NOT install ext.rom and dit NOT use that auto-network-wizard-settings thing .I thought of pickin it up somewhere on this board that that would mess the settings.
Anyway, now I softresettet about 5 times and still settings are there... When not, I will use your tool!
(softreset via stylus ...)
Riel said:
Hmm, interesting!
Now I did NOT install ext.rom and dit NOT use that auto-network-wizard-settings thing .I thought of pickin it up somewhere on this board that that would mess the settings.
Anyway, now I softresettet about 5 times and still settings are there... When not, I will use your tool!
(softreset via stylus ...)
Click to expand...
Click to collapse
You shouldn't soft reset your device with stylus.. If you want to restart your phone turn it off and then on again.. Its not meant to be reset via stylus.. Its like plugging the cable while your computer is on, which will couse data loss..
All those setting should stay after a soft reset so I don't see any problem. If you Hard-reset they should be gone
It shouldn't but it did Anyway, now it stays, even with softresetting with stylus (which isn't neccesary anymore because this rom is damn stable...)
Soft-resetted with powerbutton:
all settings gone
The .zip makes the accounts re-appear (also without settings) which is better then before (i couldn't add it again coz it 'already existed' though invisible)
But it is not really a solution...
A lot has been written already about this topic, it is a flaw of WM6, so they say. In short: WM6 don't write its cache to resident memory to often, so if you reset to quickly after making some settings, they are lost. The idea of using the off/on button is to force the sysyem to write the cache to memory. Obvious that theory doesn't apply in your case.
Try "search" to find more threads about this topic, perhaps you will find a solution that works for you.

[Discontinued]Hdubli WM6.5.3 28002 beta 3 HTC LEO EDITION for the ACER F1 S200

READ THIS FIRST POST COMPLETELY BEFORE FLASHING!!!
ATTENTION: There has been 3 reports including mine of a random probably device specific issue/bug, its the "windows mobile logo hangs and eternal soft resets issue" as i call it, this IS NOT A ROM RELATED BUG, this might or might not happen to you, nether me or hdubli can predict this, if it happens to you go back to ether your stock rom or hdublis 23506, we havent found any solution or even what causes it, bear with us guys were trying to track this down.
NEW RELEASE BETA 3 IS NOW ONLINE
This is beta 3 guys so enjoy, this rom was cooked to have a HTC HD2 feel to it, just try it, you wont be dissapointed.
HERE ARE THE FLASHING INSTRUCTIONS:
- Download 'ACER S200 Beta 3.rar'
- Extract 'ACER S200 Beta 3.rar' where-ever you choose(I prefer the Desktop)
- Navigate to '(wherever you extracted Acer S200 Beta 3.RAR)\ACER s200 beta 3\1. Flash'
- Double Click on 'ACER_EUU.exe'
- Click 'Next'
- Click 'Continue'
- Click 'Yes'
- Click 'OK'
- Completely power off your phone
- Once phone is powered off hold down the 'Camera' and 'Power' Buttons until LED indicator starts blinking
- Once LED indicator on the front of the phone is blinking click 'OK' on your computer
- Wait until 'ACER_EUU.exe' says 'Finished'(It should take 15-25 minutes)
- Once it is done flashing, hold 'Power' button on phone until it vibrates
-------------------------------------------------------------------------------------------------------
After you have set up your device copy the .cabs that are in '(wherever you extracted Acer S200 Beta 3.RAR)\ACER s200 beta 3\2. CABs' to your device and install them in the following order:
1. Fixsms.cab
(Restart)
2. valkyrie leo.sms.client1.43.cab
(Restart)
3. E-natives showcasesuite
(Restart)
4. Easykeyboard.cab
5. Improve sound.cab
(Restart)
6. 1_percent_battery.cab
(Restart)
-------------------------------------------------------------------------------------------------------
That's it! You're done!
Flashing instructions provided by unforseenenemy( THANKS A LOT FOR THIS!)
Dowload link NEW ALL IN ONE PACKAGE by unforseenenemy(new uncorrupted link please test to see if it works fine)
Here are some nice screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(another beautiful screenshot made by unforseenenemy)
Fixed stuff so far:
1.Htc messeging works.
2.Email works.
3. Phone canvas position fixed(thanks to a roomcooker over at the diamond 2 thread)
4.Light sensor works
5.New startup animation and sound.
6. Added half working htc album(has some graphic issues and its always in landscape mode)
Bugs so far:
1.Battery % is 100% always, just tap on it and htc notification will show the true battery lvl.
BETA 3 FLASHING TOOLS DOWNLOAD LINK(remember to use the partition.mbn from the beta 3 7z file)
Use this extrom.bin(placed inside the flashing tools folder and replace with old one.
Cabs that need to be installed after flashing:
INSTALL THESE CABS IN THE FOLLOWING ORDER
1.Fixsms.cab(Restart)
2.valkyrie leo.sms.client1.43.cab(Restart)[thanks to valkier for this cab]
3.E-natives showcasesuite(Restart)
4.Easykeyboard.cab
5.improve sound.cab
Beta 2 download link:Build 21857 leo edition...click here
Cabs that need to be installed after flashing:
INSTALL THESE CABS IN THE FOLLOWING ORDER
1.fixsms.cab(attached below)(restart)
2.easykeyboard.cab
3.htc_task_2.1.cab(for closing apps using the X"
Click to expand...
Click to collapse
28002 MANILA 2.5 EDITION
Here it is guys finally the first BETA1 is online, download and report any bugs you might find, soon il be changing the pictures in the thread and posting some position fixes for the rom, so keep on checking the thread/
Heres's a video for you guys, thanks to hdubli
http://www.youtube.com/watch?v=uVPy30-hJMk
Manila position fix is attached, thank amarullz for this great taskmanager and manila position fix.
How to change backgrounds to still or animated:
1.Install any kind of reg editor.
2.Go here HKCU\software\htc\manila
3.In that registry look for a string that says "AnimatedBackgroundPath", click on it and its going to show a path "Windows\AnimatedWallpaperPath\" here add any of the animated wallpapers located in "windows\Animated Wallpapers".
4.Same thing for still WVGA wallpapers.
5.Then disable and Enable manila.
Click to expand...
Click to collapse
BUGs in this first BETA 1:
1.Album is still not working, this will get fix on the BETA 2 release.
2.Music and Pictures tab are still not rotating, this will also be fix on the BETA 2 release.
DOWNLOAD
CLICK HERE
Flashing Instrucions:
1.Download the rom
2.Open it using winrar or 7zip
3.Extract the files to a new folder
4.Look for a file named "version.txt" and change what it says for "2.eTouch.01_EN" withough the quotes.
5.Execute ACER_EUU.exe
6.Follow the onscreen instructions
7.Good Luck
Click to expand...
Click to collapse
NOTE:The rom dosnt look like that, that how it looks on my device with the stuff i installed after flashing, if anything goes wrong with the rom, flash back to 23506 or a stock rom.
Special thanks to...Hdubli hes is the most important person in the development of our custom roms, give him all the thanks, withough him this would have not been possible..
Sincerly
Rafyvitto
Click to expand...
Click to collapse
Cross fingers, thank you rafyvitto
Amazing man~~~
Waiting for your news.
BTW, will the Bluetooth performance improve?
good news! is it possible to make second version with normal wm 6.5 (i mean 5.2.21857) dont like 6.5.1 big buttons style (
Can't wait. This is the one I've been waiting for. How far along are you?
I kind of agree with JMFC too. Unless you can at least turn those buttons off. I still haven't played with WM 6.5 too much.
Also, I have been wondering if you could adapt the tf3d bar to go to other programs than what htc has used. IF you like a different music player or photo viewer for instance. My main uses are the programs tab, the internet tab, and the weather tab. Home and contacts being obvious as well.
jmfc said:
good news! is it possible to make second version with normal wm 6.5 (i mean 5.2.21857) dont like 6.5.1 big buttons style (
Click to expand...
Click to collapse
Ask hadubli about that mate, i dint cook the rom xD
fbickley said:
Can't wait. This is the one I've been waiting for. How far along are you?
I kind of agree with JMFC too. Unless you can at least turn those buttons off. I still haven't played with WM 6.5 too much.
Also, I have been wondering if you could adapt the tf3d bar to go to other programs than what htc has used. IF you like a different music player or photo viewer for instance. My main uses are the programs tab, the internet tab, and the weather tab. Home and contacts being obvious as well.
Click to expand...
Click to collapse
I think this can be done by some registry changes, il have to look into that but im pretty sure it can be done, il let you know as soon as i find them.
casper326 said:
Amazing man~~~
Waiting for your news.
BTW, will the Bluetooth performance improve?
Click to expand...
Click to collapse
Bluetooth performance wont improve unless Acer them selfs update there bluetooth drivers, we'll have to wait for an official update from acer them selfs, btw im not having problems with bluetooth what so ever.
jmfc said:
good news! is it possible to make second version with normal wm 6.5 (i mean 5.2.21857) dont like 6.5.1 big buttons style (
Click to expand...
Click to collapse
+1
Who had the stupid idea of those ugly buttons. Main reason for not flased Hdubli's rom are those. And I definetely like them on top.
If I had the option to revert to 21857 rom I would proceed (even not the original).
But you are my heroes guys. Keep on.
I thought I read that hdubli had given up on the 2.5? or are you helping him enough to make it work rafyvitto?
rafyvitto said:
Bluetooth performance wont improve unless Acer them selfs update there bluetooth drivers, we'll have to wait for an official update from acer them selfs, btw im not having problems with bluetooth what so ever.
Click to expand...
Click to collapse
OIC~
If My S200 connected the handfree and standby for about half hour
the bluetooth handfree will have lag,echo.
I have tried to connect the handfree to my little mobile Samsung M-628.
Everything work fine...
fbickley said:
I thought I read that hdubli had given up on the 2.5? or are you helping him enough to make it work rafyvitto?
Click to expand...
Click to collapse
You could say so, i pointed him to the right OEM packages that were needed, and so he manage to make it work 98%, there are still some bugs like SMS arnt working, mails cant be open and so on, but im looking it into these problems to fix them, so no worrys, il keep you guys update, unless hdubli fixes them before me xD.
First post updated =]
thanks,waiting for the new rom
Is it possible for anyone to upload the stock wwe rom please?
freco said:
+1
Who had the stupid idea of those ugly buttons. Main reason for not flased Hdubli's rom are those. And I definetely like them on top.
If I had the option to revert to 21857 rom I would proceed (even not the original).
But you are my heroes guys. Keep on.
Click to expand...
Click to collapse
just install another skin, like amarullzGreen, it looks superb!
http://forum.xda-developers.com/showthread.php?t=559695
bommel0815 said:
just install another skin, like amarullzGreen, it looks superb!
http://forum.xda-developers.com/showthread.php?t=559695
Click to expand...
Click to collapse
Nice!!! Thanks for this.
it's what I use on my neoTouch
skinning later may be the easiest thing to do, although I do hope they have a very thin bar for the bottom bar that fits wvga better. I don't like how it interferes with tf3d's slide bar. But really I just can't wait to get this up and running.
Also, I still need a layman's breakdown of backing up my current stock ROM. I read some of what hdubli already put out, but if it is possible to simplify it, it would be a great help.
And when this 2.5 ROM is finished, I'd love for a very simple step by step to flash it properly. I think flashing is probably easier on the f1 than it was on the f900, since I don't believed they figured out how to flash from a sdcard. But I have only done it about 3 times so far, and want to make sure I've got it down before I screw it up.
Thanks again for all the work, and I can't wait!
Actually, after reading more into how to backup a rom, by dumping and reconstructing, this doesn't seem to be the thing for me to attempt. I don't seem to be able to find any programs/utilities that will handle this as well. SO................
Would any of the experiencenced people here be so kind as to actually reconstruct and make a factory rom for the Acer s200 available? I am too old to learn too many new tricks, and while I am a capable dabbleler, I am by no means capable of being a professional. So knowing my limits, I can only stand on the street and ask for help.
By the way, if you need the stock rom to reconstruct, and can tell me how to dump it on my device, I would be happy to send it to you.

[rom]WM6.5 CE OS 5.2.28004.28004 rom for startrek(by 子原ziyuan)

[rom]WM6.5 CE OS 5.2.28004.28004 rom for startrek(by 子原ziyuan)
the WM6.5 CE OS 5.2.28004.28004 rom for startrek(by 子原ziyuan)including:
28004 SYS XIP
two language system(Chinese &English),it starts with chinese language system,you can change chinese language into english language in settings(设置settings——区域设置regional settings——语言language———choose the us english and restart), i don't know how to make a pure english language rom,,my english is not good,hope you can understand what i mean,
SDHighCapacity support
NETCompactFramework 3.7
here is download:
http://rapidshare.com/files/315090001/WM6.5_CE_OS_5.2.28004.28004_rom_for_startrek.nbh
rom_for_startrek.nbh
thanks to 子原ziyuan
hope you enjoy it !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It seems to me that you are missing some .MUI files for English. Even if you change the Regional Settings some functions remains in Chinese... But this is a good start. Keep it up. I do hope you decide to release your upcoming ROMs to our StarTrek Community here in XDA.
This looks amazing! Thanks for bringing WM 6.5 to the StarTrek!
it's only the nbh file ? how do i use this ? can i just replace the nbh in other rom installer ?
and new rom is always welcomed
it's been a while since the last rom update for our startrek....
wait.... what ?? 60mb free storage (and 68mb total storage) ??? is that even a startrek ? mine only have 18mb storage and 14mb free storage (wm 6.1)
minori_aoi said:
it's only the nbh file ? how do i use this ? can i just replace the nbh in other rom installer ?
and new rom is always welcomed
it's been a while since the last rom update for our startrek....
wait.... what ?? 60mb free storage (and 68mb total storage) ??? is that even a startrek ? mine only have 18mb storage and 14mb free storage (wm 6.1)
Click to expand...
Click to collapse
of cause you can update it with ruu, my phone is cingular 3125,and has 128m storage and 64 memory,it is a enhanced startrek ,specially 1100ma Battery。
Pampooh said:
It seems to me that you are missing some .MUI files for English. Even if you change the Regional Settings some functions remains in Chinese... But this is a good start. Keep it up. I do hope you decide to release your upcoming ROMs to our StarTrek Community here in XDA.
Click to expand...
Click to collapse
i know some place still display chinese, this rom is made by ziyuan ,not me,he has ever told me how to romove chinese and make a real english rom,but i don't know how to start ,it is beyond me ,zi yuan used to make new chinese rom for us in (www.ioicn.com.cn), he is a good guys .
zheny said:
i know some place still display chinese, this rom is made by ziyuan ,not me,he has ever told me how to romove chinese and make a real english rom,but i don't know how to start ,it is beyond me ,zi yuan used to make new chinese rom for us in (www.ioicn.com.cn), he is a good guys .
Click to expand...
Click to collapse
The only way you could modify the Language of the ROM is if you could get your hands on the kitchen itself... But all in all it is quite a functional ROM... Keep it up.
minori_aoi said:
it's only the nbh file ? how do i use this ? can i just replace the nbh in other rom installer ?
Click to expand...
Click to collapse
Just place the .NBH file along with any RUU. It would be better if you could get the automated ones. You can use the one from my ROM. Just replace the .NBH file with the one provided here.
thanks... i can't wait to try it ... too bad, my psu is broken today so i can't use my pc >_<
any bug found so far ?
* Ok i've tried it on my dopod s300...
- T-Mobile Default home screen only give me a blank screen ...
- Windows Media Player still in chinese (can anyone show me how to update the library ?)
- And how to get the sliding panel like in the first pic ?
Hi!
WM6.5 on Star Trek looks amazing and feels like a respawn of that device. However i wanna wait til a clean english version is possible and out. Ill come back from time to time to check this. Please keep up your nice work!
Good luck and thanks much,
Future
Is the front screen functioning?
Does this ROM support the features & buttons on the front secondary screen?
I'd like to try it but if these features are missing, it'd be a deal breaker.
Update I:
Tried flashing this ROM using the MicroSD card method but got Invalid Certificate warning.
Should I use the RUU for StarTrek to get past this error?
How did the rest of you perform this ROM flashing?
The bootloader shows:
STAR100
IPL 1.32.0001
STAR100
SPL 1.32.0000
Update II:
I used Erofich's ROM update package & managed to flash this ROM successfully. I swopped the STARIMG.nbh from the temporary RUU unpacked folder for this (renamed STARIMG.nbh) ROM & it flashed it without problems. Now the phone is up & running.
See this thread.
randomguy2014 said:
See this thread.
Click to expand...
Click to collapse
Already done. MicroSD card method will not work with non-Official ROMs.
Erofich's ROM package does the trick neatly.
How is it working?
I'm looking at this thread with interest....how is it working with your phones? Functionality? Looks?
Bro , pls keep on upgrading n developing more wm6.5 chinese roms to benefit the whole world startrek user , keep up yr good work , thank you and best regards - jimmunsw
Link to SYS and XIP folder
Pampooh said:
The only way you could modify the Language of the ROM is if you could get your hands on the kitchen itself... But all in all it is quite a functional ROM... Keep it up.
Click to expand...
Click to collapse
Over here is the link to SYS and XIP folder!
http://forum.xda-developers.com/showpost.php?p=5414870&postcount=29
OmapClock trick
Im using this rom and its actually pretty good. There are a few gripes where applications (specifically for me - Media Player & Comm Manager) are in Kanji or equivalent but all in all its fast and the updates to WinMo are good. I especially like the new standard Homescreen. The only thing I have problems with is that the bluetooth etc settings are in kanji... and this would be a problem for someone who doesnt have another WinMo handset to hand to understand what menu option controls what...
I have also found an interesting trick with Tornado Power Control using this rom that should be repeatable on any startrek rom...
My phone would run at 252mhz stable when I overclocked it using TPC & OmapClock - but at the 264 setting would lock up instantly and be useless until reboot...
TPC uses a remote procedure call called Power_on.lnk to clock the phone above its 228mhz limit using OmapClock - and this basically is a lnk file that calls Omap and sets its speed...
Now, here is the trick. I dont know why but the setting within omapclock and the setting using the link file is independant. Where a phone will lock up on a speed setting within Omapclock - it doesnt necessarily follow that the phone will do the same when the same setting is set from the *.lnk file.
What you need to do therefore is edit the *.lnk file clock setting incrementally until you reach the highest stable clock speed... ie make increments until you reach a speed where the phone locks up and needs rebooting - then back off one setting. I did this and then set the *.lnk file for TPC into my startup group which calls TPC which then calls power_on.lnk > omapclock at XXXmhz
Normally the Startrk runs at 180mhz which is fine for what the phone would have been used for in the days when it was introduced... but not so hot now when phones are used for things such as MP4 playback etc..
Using the method above I have managed to clock my handset to 263mhz at which point it is completely stable.
Using SKTools lite benchmarks....
@ 263Mhz
Integer : 142.6 Moves/25
Floating point : 3.485 MWIPS
@ 180Mhz
Integer : 102.6 Moves/25
Floating Point : 2.485 MWIPS
As you can see there is a substantial difference between the two. At the higher speed the handset is now able to run MP4s full screen in Media Player that are fully watchable - although there is some movement flare (I think this may be to do with the screen itself more than anything)...
The increase in processor speed also feeds into memory access times - and it would seem that in this case the Startrk is already a quick design - since overclocked its memory times are on a par with machines running 300mhz+ clockspeeds..
hi
I used tpc for overclocking startrek more than hundred times and never seen freezing , even in 263Mhz !!
maybe your device ( hardware ) or your rom had some problems .... ?
Anyone cooked a english one yet?
I've tried this one & it is great---but I want it all in english---If no-one has done it yet--could someone point me towards a tutorial/guide to do it?
Bump---any ideas anyone?

Categories

Resources