Thanks to the person who uploaded the Shipped radio to XDA-Dev ftp
Radio version 1.27.00.00 is available for the Hermes!
This radio has HTC_BOOT 0107, so it is "safe" to upgrade. We have it in two flavours:
Shipped upgrade (signed NBH file) containing only the radio, valid for:
HERM300 T-Mobile devices with CID starting with "T-MOB1"
SuperCID devices
NOTE: SuperCID (unlocked) devices with HTC_BOOT 0108 (for example SoftBank X01HT post Dec-2nd) must use bootloader SPL-1.09 to flash this radio!
Download: RUU_Hermes_TMD-TMA_Radiopatch_1.27.00.00_107_GER.exe
Extracted upgrade (NBF file) valid for:
Hermes devices with bootloader 1.04 and HTC_BOOT (radio bootloader) version 0107.
Remember:
- screen will show "Upgrade Radio Stack Please wait........."
- after finishing flashing radio (about 15 min) you will see an "Upgrade Error", but the radio ROM will be flashed anyway.
Download:
HERM_1.27.00.00_type2_radio.zip
For more information see the extracted radio wiki page and information about radio ROMs.
As always, upgrade at your own risk!
Enjoy!
waho!! i feel that a new os rom is near!
tanx pof! the Radio on Hermes is now 1.27
Any ideas on what has changed from the Cingular shipped rom?
Legolas
Upgraded. Now to see what is different.
Upgraded and testing now.
Thanks!
Thanks POF. This has improved my reception a bit. Gonna test this in other sports that I had spotty reception and see if this makes it better.
Testing on the new Radio ROM...
Does anyone knows if the Wi-Fi is related somehow to the Radio ROM? My old wizard somehow has a better reception.
I understand this version does not contains the GPS support.
Currently I will wait with that.
Dukas said:
I understand this version does not contains the GPS support.
Currently I will wait with that.
Click to expand...
Click to collapse
what makes you think there ever will be gps support??????...it will be most probbably a hack, as i cant see the providers etc will evert release one
I think that with this radio rom phone can faster logon to BTS when we turn phone on
regards
Sariel
zbee said:
what makes you think there ever will be gps support??????...it will be most probbably a hack, as i cant see the providers etc will evert release one
Click to expand...
Click to collapse
I don't believe in official support.
Trinity users also don't get GPS from their providers but can happily use the GPS.
Dukas said:
I don't believe in official support.
Trinity users also don't get GPS from their providers but can happily use the GPS.
Click to expand...
Click to collapse
so dont waste bandwidth with a useless posts then...any way back on topic, for me i also get a better performance with this radio aswell
Just flashed the top file and worked like a charm.
I'm using the South African ROM with BL 1.09.
Cheers
This ROM got a lot of problems regarding GSM Data Calls (like 1.21.31.10 ROM). I switched back to 1.20.31.10.
VivaErBetis said:
This ROM got a lot of problems regarding GSM Data Calls (like 1.21.31.10 ROM). I switched back to 1.20.31.10.
Click to expand...
Click to collapse
Any1 can confirm this?
SpH1nX said:
Any1 can confirm this?
Click to expand...
Click to collapse
The probles is this, posted by myself in http://forum.xda-developers.com/showthread.php?t=291297:
- But THE PROBLEM is that the data calls are broken in this ROM. I used direct Modem connection with my work (we got two 56k Modem waiting for incoming calls). It connects without apparently problems with the modem (maybe it takes more time than the older ROM) but the data interchange is very sloooooooow and suddenly it stops! The data call isn't dropped but it doesn't interchange data after two or three minutes of slooooooow interchange. Finally, if you close the call and tries to reconnect it can't!!!! WM5 says that an unknown error happens and can't be connected!!!!
After a soft reset you can connect again but it remains very sloooooow...
Fortunately I've switched back to the old and stable 1.20.31.10 ROM and everything works normal now (thank God!).
Click to expand...
Click to collapse
It's very easy to check. Seems to be a stability problem.
guys, production Radio firmware revision would be 1.28. as per latest Trinity and Cavalier.
1.27 seems to be BETA release.
Sorry, I have read the replies in other post!! anyway, thx for pof's reply. ^_^
zbee said:
so dont waste bandwidth with a useless posts then...
Click to expand...
Click to collapse
Sorry to bother you but do you own the Internet bandwidth?
Should I contact you for approval for my next posts?
As we say in Hebrew .... Z Bee.
Good day mate.
Related
Hey All,
First of all this is a great site. Just got my Jas Jas a week ago and im in love with this place.
Any way enuf ego inflating.
--------
I thought that i would upgrade the radio version because there were reports that this would improve my UMTS / HSDPA reception.
It didn't here are my results.
1.34.00.10 Download (1st try)
Tried this one first as i thought the latest might have been buggy. Flashed nicly but the reception defaulted to GSM. Only worked on UMTS when i changed the band to 2100 rather than 850. And then the reception was 2 bars compared to the 100% i usually get.
1.27.00.00 Download (2nd try)
Tried this one next as its the reccomneded "stable" version.
Still go the same results.
1.20.31.10 (Orignal Shipped rom)'
Ended up returning to this rom to get functionality and worked no issues.
Was just wondering if any other AU ppl had these issues ?
And what is the chosen ROM of choice in AU.
I am still plucking up the courage to flash to XDA-Live but if i do my radio should not change because the install does not include a radio, correct.
And one last ? if i o upload to XDA-L does the extrom stay the same and will my unit grab all the op settings that are in the EXT Rom or do i have to load then with a cab that i can grab out of the ship rom?
Hope the post wasn't to long,
Thanks
Hi Shaun,
I suggest you have a read through the threads and the Wiki, you'll find most of your answers are in there. XDA Live does not contain a Radio ROM so will not affect that side of things. Personally I recommend putting in your provider settings manually, as that way you know nothing will stuff up due to any funny files in the CAB!
I suggest you try the new radio ROMs again when you're running WM6, perhaps you've got issues with the icons displaying incorrectly depending on your radio version. Personally I'm using 1.35 without issue, and its been better than anything else, but then again I'm not with a provider who prides itself on making its own stupid frequency decisions just to be awkward
Cheers
Kevin
Shaun33 said:
Hey All,
First of all this is a great site. Just got my Jas Jas a week ago and im in love with this place.
Any way enuf ego inflating.
--------
I thought that i would upgrade the radio version because there were reports that this would improve my UMTS / HSDPA reception.
It didn't here are my results.
1.34.00.10 Download (1st try)
Tried this one first as i thought the latest might have been buggy. Flashed nicly but the reception defaulted to GSM. Only worked on UMTS when i changed the band to 2100 rather than 850. And then the reception was 2 bars compared to the 100% i usually get.
1.27.00.00 Download (2nd try)
Tried this one next as its the reccomneded "stable" version.
Still go the same results.
1.20.31.10 (Orignal Shipped rom)'
Ended up returning to this rom to get functionality and worked no issues.
Was just wondering if any other AU ppl had these issues ?
And what is the chosen ROM of choice in AU.
I am still plucking up the courage to flash to XDA-Live but if i do my radio should not change because the install does not include a radio, correct.
And one last ? if i o upload to XDA-L does the extrom stay the same and will my unit grab all the op settings that are in the EXT Rom or do i have to load then with a cab that i can grab out of the ship rom?
Hope the post wasn't to long,
Thanks
Click to expand...
Click to collapse
im using the trinity radio 1.35.00.11 with NextG and also Vodafone and the HSDPA reception is awesome...
what ROM version are you using now??
xda-live does not flash the extended ROM... so you can use HTweakC to unlock it and use the cabs.....
I use Blackberry so my device is connected via UMTS on Telstra all the time. I had upgraded to 1.35 radio because of the reports of it's increased reception.
Well the battery drained in about 5 hours so I am reverting back to the original rom which gave me 24-36 hours battery life with UMTS active.
walshieau said:
im using the trinity radio 1.35.00.11 with NextG and also Vodafone and the HSDPA reception is awesome...
what ROM version are you using now??
Click to expand...
Click to collapse
Thanks for the response guys. Ive read the wiki and have taken it in, just wanted to check.
I have now reverted back to the orignal radio rom that was shipped with the unit which is 1.20.31.10. Its a pain i am with telstra but there is nothing you can do when the company has 30od services with them.
Was going to load the trinity mod but does this mean that i need to super CID the device. As i got a country ID. This means i will void the warrenty. Is there a way that i can do it without the super CID.
Err... the Trinity radio version in the Wiki (which I hope you're getting from the Hermes Radio Rom wiki page and not the Trinity page!) is bundled with SSPL which means you don't have to worry about CID.
Shaun33 said:
Was going to load the trinity mod but does this mean that i need to super CID the device. As i got a country ID. This means i will void the warrenty. Is there a way that i can do it without the super CID.
Click to expand...
Click to collapse
yes you need to run SSPL on your device before you run the update....
edit... and no you dont need SuperCID to flash this radio...
walshieau said:
yes you need to run SSPL on your device before you run the update....
edit... and no you dont need SuperCID to flash this radio...
Click to expand...
Click to collapse
.. but because the 1.35.00.11 radio only package from the Wiki is already bundled with the modified RUU updater which pushes SSPL to the device automatically, he'll only need to run the ROMUpgradeUt.exe
Edit: Actually with the 1.35.00.11 package, you don't even need to do that - just run the .exe you download from the Wiki and follow the prompts! What could be easier!
KevinBaker said:
.. but because the 1.35.00.11 radio only package from the Wiki is already bundled with the modified RUU updater which pushes SSPL to the device automatically, he'll only need to run the ROMUpgradeUt.exe
Edit: Actually with the 1.35.00.11 package, you don't even need to do that - just run the .exe you download from the Wiki and follow the prompts! What could be easier!
Click to expand...
Click to collapse
i sent him the update... and i forgot the sspl-herm.exe file....
walshieau said:
i sent him the update... and i forgot the sspl-herm.exe file....
Click to expand...
Click to collapse
Ah, makes sense then .
Shaun, you can either download the modified RUU Updater, or just download the 1.35.00.11 Radio ROM with RUU/SSPL updater integrated.
Thanks guys i thought that that rom was not the trinity one. Then one that i got was from the ftp .
Now i got that one which does have the RUU/SSPL updater integrated.
Thanks guys.
Just flasshed with the 1.35 Rom and it seams that its got Less reception than before. Onlyt by a bar and this in my current location. I have set the abnd to auto and will see how it goes will update ina day or 2.
I've extracted the radio ROM from latest Trinity ROM and packaged here as a standalone NBH radio upgrade:
HERM_RADIO_1.38.00.11_Only_SSPL.rarThis radio has HTC_BOOT 0108 and GPS enabled.
Keep in mind that the safest procedure to upgrade your radio right now is:
Flash Hard-SPL v1.10.Oli on your phone
Flash the desired radio upgrade using the RUU package
Both steps have to be done with phone connected to computer through USB cable and activesync enabled, Des SSPL will be pushed into your phone when the RUU starts.
Remember that when flashing a radio only you don't need to hard-reset your phone, so no data will be lost.
Enjoy!
Excellent! Have you given this radio a work-out yet??
still flashing 92%
Edit: Flashed and working fine (see attached image), but still haven't seen any noticeable difference
What news with this radio ? most stable, battery ingrasse ?
pof said:
Keep in mind that the safest procedure to upgrade your radio right now is:
Flash Hard-SPL v1.10.Oli on your phone
Flash the desired radio upgrade using the RUU package
Enjoy!
Click to expand...
Click to collapse
Pof ,I understand 1.10.Oli will somehow protect us from bricking device by flashing a wrong radio.But since it is base on 1.04 ,so it will not support Radio BL 0108,so if I am now having 0108 here,and I flash this rodio 1.38,and I got a bad flash,I still can not repair my device.Is that right?
Radio-BL 0108 or something newer?
Hope the battery-duration will be better than in 1.35 Radio
@qvik123: If that happens you have two options to unbrick your device:
1) wait for a hard SPL based on 1.09 (which AFAIK Des will release soon), once you have it reflash the radio again.
2) You will still be able to flash an OS only because hardSPL will still keep the "fake" SuperCID on your device, so flash a OS image with KITL enabled and then use the KITL mehtod to unbrick your device with Platform Builder.
By any means, if **** happens do not overwrite 1.10.Oli with other bootloader.
Thanks Pof,you just answered the question which kept me thinking since Hard SPL released.Flashing this one,now by 30%.
flashed 1.01 oli, flashed 1.38.00.11 - no problem, BUT when I flashing/updating (or possibly bricking ) device, I like to know what exactly is a differences between versions, only one think I know about 1.38.00.11 is, that this version have GPS enabled. Thats all. Is any changelog, or list of changed/updated/improved features inside of roms? I know, that you just dump this rom from device, but it is really nice to know, if it is necessary. perhaps we should created one special thread with differences between versions, to better orientation (sorry if I miss this one, but I think at this time doesnt exist)... guys - thx for your work anyway
Thanks Pof I am going to upgrade.
ok a little lost on the process can I just download the 1.38 file and that will upgrade it or do i have to do something to the boot loader first? Sorry for the simple question.
yes, the question is really simple. but there is one more think you can do... read all this thread, and also this one. all necessary information is in there. and if you dont want to have 700$ paperweight, I really recommend to read all information about flashing procedures in wiki - here before you start. in any case of question or problem, do not hesitate to write some posts, but if anybody ask similar question like you, without some reading, which, yes, need a some time, then If somebody want to find any relevant and usefull information, must read about 60 % pointless posts... it is nothing personal, just for your info. forums is about people, and people keep forums alive.
you did not provide us any information about you current version of OS/ROM, BL version, for me it was easy, just extracted Hard-SPL.zip, runned ROMUpgradeUt.exe - after reset I have oli BL, then you can run HERM_RADIO_1.38.00.11_Only_SSPL.rar.... there is much much more knowledge about that, so try wiki first, it is only for you own good.
jasonmoe said:
ok a little lost on the process can I just download the 1.38 file and that will upgrade it or do i have to do something to the boot loader first? Sorry for the simple question.
Click to expand...
Click to collapse
sinmae said:
....just extracted Hard-SPL.zip, runned ROMUpgradeUt.exe - after reset I have oli BL, then you can run HERM_RADIO_1.38.00.11_Only_SSPL.rar.... there is much much more knowledge about that, so try wiki first, it is only for you own good.
Click to expand...
Click to collapse
Yes definatly read the wiki etc... but also do as sinmae has done and load a HardSPL first, this is especially relevant when flashing radios.
@pof are you also running a HardSPL based bootloader??
...can somene put this ROM on Rapidshare or somewhere else, cause XDA FTP is not working
Regards,
Primoz
any feedbaack with wm6 roms
has anyone tried this radio with wm6 and whats the advantage over radio 1.35. i have got wm6 running with radio 1.35 running very good with no issues and lock ups.
sinmae said:
Is any changelog, or list of changed/updated/improved features inside of roms? I know, that you just dump this rom from device, but it is really nice to know, if it is necessary.
Click to expand...
Click to collapse
Unfortunately HTC keeps this information private, so there's no ChangeLog.
The radio was not dumped from a device, but extracted from 1.23.408.1 Italian Trinity ROM.
mrvanx said:
@pof are you also running a HardSPL based bootloader??
Click to expand...
Click to collapse
Yes, I'm running 1.10.Oli right now.
Pc78 said:
XDA FTP is not working
Click to expand...
Click to collapse
It's fixed now, try to download again. The server has been down during last hours, but it should be all fixed now.
duttythroy said:
has anyone tried this radio with wm6 and whats the advantage over radio 1.35.
Click to expand...
Click to collapse
Yes, I tried only with WM6. We don't know the difference / advantage, just that it's a newer (higher) radio version.
duttythroy said:
has anyone tried this radio with wm6 and whats the advantage over radio 1.35. i have got wm6 running with radio 1.35 running very good with no issues and lock ups.
Click to expand...
Click to collapse
The download server was down now running!!!!!
Just upgraded to radio 1.38 from 1.35 and I am running xdalive first release WM6 on O2 3g. Since the upgrade I am pretty sure the phone signal is now stronger as I have tested it in areas around my home and outside that got no signal, especially near my pc. I can now make a call next to my pc with 3 bars on the signal meter! The signal does not drop so much, I will test further and report back any problems, but so far so good.
Please let me know how you get on.
Can somebody compare the battery duration between this Radio and 1.34?
PAPPL said:
Can somebody compare the battery duration between this Radio and 1.34?
Click to expand...
Click to collapse
I will let you know on that one as I had it fully charged for the radio upgrade. I will keep an eye on it and report back.
I was about to down grade my radio back to .1.27 or earlier beacause of my UTMS reception in Brisbane (AU) and also the battery life. So i will also let you all know how this goes.
Hi there,
after upgrading to WM6 (twice) i feel that the radio version (1.45.00.00) is less reliable than the one i had with WM5 (1.38.001),
about 10% of the calls i get, the phone doesn't ring at all and about 30% of the calls the phone only rings once and then stops,
overall reception in 3G is worse than it used to be.
is there a way to cook WM6 with the WM5 radio?
thanks
I THINK if you flash your device with Mobile 2005 you'll ger your radio ROM back, not sure.. Just try and post the results..
thank you for your post
yes indeed i will,
but then i will get WM5 back again, right?
what i really wanted was WM6 with WM5's radio.
i upgraded to the new WM6 with radio 1.45.00.10 so far so good, i will have to wait before getting any conclusions
well i think that both radio versions are almost the same, so i am asking again if it is possible to change only the radio version or to combine an old radio version with WM6 before flashing the whole rom,
thanks for your reply
aseptic said:
well i think that both radio versions are almost the same, so i am asking again if it is possible to change only the radio version or to combine an old radio version with WM6 before flashing the whole rom,
thanks for your reply
Click to expand...
Click to collapse
I have only seen the 1.47.51 radio posted seperately. It seems to work pretty well for me.
Later...................
P.S. It does require a hard reset to install it tho.........Later
When I upgraded to WM6 the radio wasn't working any more: I was unable to receive incoming calls, the device switch directly to messaging, and the radio was rebooting after each call.
For me, in France, if the ROM radio of the Athena is higher than 1.38 the phone app is turning mad... So I had to go back to WM5 WWE then, flashing to the WM6 rom posted on the forum.
I've tried few days ago with the new rom from DOPOD, everything is working quite well, exept... the phone app which do no whant to receive calls any more.
I've a german AMEO with the HARD SPL but it does the same thing with a "french" HTC X7500.
Is it a provider incompatibility?
That's why i'm intersted of someone has the 1.38 radio ONLY
thanks!
Well me too.
Does somene have the original radio version 1.38.00 for posting?
thanks
Radio rom 1.38
@Olipro
Could you make an rom image with only radiorom 1.38 I have found that in the Netherlands radio 1.38 has a far better UMTS reception and it also has a far better GPS reception. This radio has no flaws and was developed for europe. I think 1.47 was optimized for the states and should be used over there. 1.45 was made for asia. So please make a 1.38 radiorom only.
QAN
QAN said:
@Olipro
Could you make an rom image with only radiorom 1.38 I have found that in the Netherlands radio 1.38 has a far better UMTS reception and it also has a far better GPS reception. This radio has no flaws and was developed for europe. I think 1.47 was optimized for the states and should be used over there. 1.45 was made for asia. So please make a 1.38 radiorom only.
QAN
Click to expand...
Click to collapse
I can make one if you like
follow this link
http://forum.xda-developers.com/showthread.php?t=319993
Wow thank guy! You're definitively the X7500 Master
duttythroy said:
I can make one if you like
follow this link
http://forum.xda-developers.com/showthread.php?t=319993
Click to expand...
Click to collapse
Hi
I have install this rom, but hare bugs, the radio is 1.45.0
the voice command dont work
need flash spl olipro
best rgds
As I can't fit enough into my sig, here is the links to my Radio ROM Repository for all Hermes Radio ROMs.
HTC Hermes Radio ROM Repository
This has all radio versions from 1.06.00.00 through to 1.56.70.11.
The Radio ROMS are supplied as RUU_Signed.nbh. You will need 7zip to extract the .7z files.
Downloads now go straight to a mirror closest to you. Please post if you see any issues.
Enjoy
I have just updated all these and included the RUUWrapper executable to make life easier on everyone involved..
Have fun with these
Sweet!!! Thanks CRCinAU, you and your roms rock...
Great! Thanks for this! Now there's one source for all radios.
radio ok?
thanks!
I just downloaded Radio Hermes_Radio_v1.47.30.10. I run RUUWrapper.exe and it says it's going to update from version "Shamanix WM6 U" to version 1.98.3
is that ok?? shouldn't it say 1.47.30.10?? (I currently have version 1.34 and a Shaps WM6 ROM)
Thanks!
diegolaz said:
thanks!
I just downloaded Radio Hermes_Radio_v1.47.30.10. I run RUUWrapper.exe and it says it's going to update from version "Shamanix WM6 U" to version 1.98.3
is that ok?? shouldn't it say 1.47.30.10?? (I currently have version 1.34 and a Shaps WM6 ROM)
Thanks!
Click to expand...
Click to collapse
yes that is normal, it will workfine and will not erase your WM6 install.
-tbae2
Hi there CRC! I noticed that you are also an Optus user.
May I ask what Radio you are using?
Cheers
*MILO* said:
Hi there CRC! I noticed that you are also an Optus user.
May I ask what Radio you are using?
Cheers
Click to expand...
Click to collapse
At the moment, I'm trialing 1.56.70.11 - however I've noticed a few issues when dialing numbers. I'm not sure if it's the Radio version or the Optus network being retarded... I used to use 1.48.00.10 and this worked fine.
Usually takes a month or so to properly test a radio rom though
If you check the Hermes Wiki here there is already an archive of the radios.
Good work nonetheless.
CRCinAU said:
As I can't fit enough into my sig, here is the links to my Radio ROM Repository for all Hermes Radio ROMs.
US Mirror #1
US Mirror #2
AU Mirror
This has all radio versions from 1.06.00.00 through to 1.54.30.10.
The Radio ROMS are supplied as RUU_Signed.nbh. You will need 7zip to extract the .7z files, and will need to supply your own copy of RUU_Wrapper.exe - or obtain it from one of my ROMs.
Enjoy
Click to expand...
Click to collapse
I know this is probably a dumb question but i'm gonna ask it anyway. I am in the uk on 02... is there a particular one i should use... if not.. what is the difference between them all?
I am trying to learn but i find this radio thing very confusing
Radio is to improved your cell network, if u'r using hermes you'll see it in setting > system > device information. if you dont find any trouble in your shiped radio than it ok, but if you think the batteery drains to fast or the signal quality is to low, than may be you should try diffrent radio.
What Radio Rom should i use?
Hi,
I have flashed my rom to CRC's 13.1-pre 7. It works like a dream. I am in Australia and my provider is 3. My current Radio Rom is: 1.47.30.10.
It seems to work all ok but my battery life is average and 3's coverage is average in some areas.
Any recommendations?
Andrew
For some reason the only radio that worked for me is 1.16 I am smack-dab in the middle of the US. All the other radios kept freezing phone in the middle of a phone call, especially when I had my bluetooth headset connected (Jawbone) from 1.27 the the latest. Funny thing is that 1.16 always shows a G instead of an E in taskbar but is connected at edge speed.
Just thought I wuld throw that out there. Using CRC 13.0 Rom. By the way great job CRC for throwin these radio packs together.
Thanks, - Philux-X
2 us links are dead
MystaMagoo said:
2 us links are dead
Click to expand...
Click to collapse
And the AU ones! What should be the magic end to the string in the message, or preferably the list of all files. You still have this thread in your signature.
Cheers
chrisnz said:
And the AU ones! What should be the magic end to the string in the message, or preferably the list of all files. You still have this thread in your signature.
Cheers
Click to expand...
Click to collapse
I've updated the links to the AU mirror. The US mirror seemed to be working ok though...
Thanks! work like a charm!
Radio Rom for Hermes
Hi CRCin AU,
What have you found to be the best Radio Rom for here in Australia?
Im also from Australia and are wondering what is radio is best, im on the Optus network.
I use 1.56.70.11 and don't seem to have any dramas on the Optus network in Australia. Give it a go and see how it works for you.
Diamond radios can now be flashed to the Raphael.
Ive got 1.00.25.05 flashed right now and its a lot better than any Raphael radio.
I had some problems in the begining but Olipro helped me.
1st you security unlock, here : http://forum.xda-developers.com/showthread.php?t=426609
2nd chose the option "Security Unlock" on you PDA in the last step and press "Commit Changes".
3rd download any Diamond radio (NBH) of choice .
4th you have 2 basic choices to make it flash:
1) extract radio from NBH, rebuild for Raphael (bit long winded but of course words)
2) open the NBH in a hex editor and substitute "DIAM*****" for "RAPH*****" or RAPH10000 or RAPH12000 (depending on whether your SPL screen says 100 or 120) - stick with wildcards first and use the exact values if it continues to complain.
I used this HEX editor : http://www.hhdsoftware.com/Products/home/hex-editor-free.html
Olipro recommends XV132 and its free.
5th now put the edited NBH (radio file) in the same folder as Raphael Custom RUU. Heres a link to the RUU : http://forum.xda-developers.com/showthread.php?t=410761&highlight=customruu
6th now flash !
And remember all of this information was provided to me by Olipro via e-mail, without me even asking (I was using the unlocker again and again and he noticed so he shot me an e-mail). Im just passing the information further, all credit goes to them !
Keep up the great work everyone !
Hi hope some cheef can convert the diamond radio roms to touch pro to avoid we brick out toys
Can you please explain what exactly is better in the Diamond radio's compared to the Raph radios? IE Battery life, reception, GPS?
And of course this may be a stupid question (well, for sure a stupid question!) but how 'bout US 3G?
Thanks!
guitarguy said:
Can you please explain what exactly is better in the Diamond radio's compared to the Raph radios? IE Battery life, reception, GPS?
And of course this may be a stupid question (well, for sure a stupid question!) but how 'bout US 3G?
Thanks!
Click to expand...
Click to collapse
nothing's better... but if you're bored and have nothing better to do...
OK, well, some will claim performance increases etc etc, the truth is, it's entirely subjective, and the current Raphael Radios are in fact just modified versions of new Diamond ones.
Olipro said:
nothing's better... but if you're bored and have nothing better to do...
OK, well, some will claim performance increases etc etc, the truth is, it's entirely subjective, and the current Raphael Radios are in fact just modified versions of new Diamond ones.
Click to expand...
Click to collapse
That's what I figured... Same hardware, probably just slightly modified radios for both devices... Well, I'll keep my current radio for now until I hear something really ground-breaking...
Thanks for the quick reply!
guitarguy said:
Can you please explain what exactly is better in the Diamond radio's compared to the Raph radios? IE Battery life, reception, GPS?
And of course this may be a stupid question (well, for sure a stupid question!) but how 'bout US 3G?
Thanks!
Click to expand...
Click to collapse
I looked under phone settings and it does not show the US 3G 850MHz frequency. Which this radio (1.00.25.05) supports on the Diamond. Dont know what thats all about........
The reception (phone and data) is better and faster what Ive seen so far. Its 1040 PM here so will test GPS tommorow and need more time to see the differences in battery.
Can you upload modified Radio?
it might not be entirely subjective, it depends on the area where you are. in any case the more choices the better.
StashCompInc said:
I looked under phone settings and it does not show the US 3G 850MHz frequency. Which this radio (1.00.25.05) supports on the Diamond. Dont know what thats all about........
Click to expand...
Click to collapse
the truth is, the raphael radios (both the ATT 1.01 and the "european" 1.02.25.31) support both 850 and 1900 Mhz 3G. it is confirmed because they've been flashed to a Fuze.
cmonex said:
the truth is, the raphael radios (both the ATT 1.01 and the "european" 1.02.25.31) support both 850 and 1900 Mhz 3G. it is confirmed because they've been flashed to a Fuze.
Click to expand...
Click to collapse
Does this mean that the Fuze has different hardware to support these ?
Ive deleted the radio I used to flash but I can make a new one if you want. Just tell me.
Edit : Ive just flashed from ROMeOS to DCS (latest) and the 850/1900MHz options are now visible in the settings. But I cant test them since Im in Sweden.
I'm in the US. If you send me one of the Diamond radios I can test it on different ROMs to see if 3G is enabled with the diamond radio.
Ok heres the Diamond radio Im using. Ive edited it to work on the Touch Pro.
Heres a link : http://rapidshare.com/files/146154003/Diamond_Radio_1.00.25.05.rar.html
well i've just brought the security unlocker and did the hex editing and i confirm that the radio from diamond works. Going to test it the next few days.
thanks for the file. I downloaded it. Do Ihave to use the Hex editor or just flash it directly to my TP?.
update:
I've tried to to the Hex edit but I cannot find any reference as specified on the first post. I might require your help as I'm not an expert. thanks
I've tried both RAPH***** and RAPH10000 as specified in my SPL and during the flashing process I get to 100% but the last page shows "error[226]: Flashwrite... flashwrite error UI535.
I've tried a couple of times with no luck. any clues?
Have you security unlocked ? Theres no need to HEX edit the file ive uploaded Ive already done that.
I think my device has been security unlocked. I was able to flash any rom radion in the past. is that right?. if not. do you have any tool i could use to security unlock it?.
correction: think what i did was to replace the hard-spl. I tried the link in your post #1 but no luck to get the security unlocker. any help?
thanks
You have to donate to be able to get the security unlock. Heres a more direct link : http://raphael.htc-unlocks.com/
good. I've donated and i'm waiting for Olipro to send me the information.
thanks
I installed HardSPL and was able to flash a different radio.
Security unlock just enables you to sim unlock aswell right? I've tried searching the whole of xda & google but can't find a definite answer that convinces me I need to security unlock if I already have HardSPL installed along with the fact that my Touch pro is already Sim Unlocked.
Sorry if this is a silly question...
edit: sorry i should learn to read because moisesz asked the question...sigh...i'm still none the wiser.
Have no problem donating but just need to know whether I need to security unlock.
hard-spl and security unlock is different, this for a fact i know... whats the different? beats me