Hi everyone
does anyone know how to get TomTom Navigator 6 to run on the Lobster 700TV?
I have managed to get the application lock sorted now but not TT N6. I know that TT N6 lists in its code the phones that it will run on but the Monet is not one of them. I have used a hex editor to overwrite another HTC phone in the code in the hope that this may work. Although the phone now starts to run TT N6, it stops with the error: "not digitally signed ...". There must be something else that needs changing but I am not sure what.
Has anyone got any ideas?
Regards ...
I got it working, but it would not find the map, or should I say it crashed when it got to that stage.
TomTom MOBILE (v5.2) works fine
I know that this may not help, but I've got TomTom MOBILE (App Version 5.200 (4450)) working on the Lobster.
I think you've found out that version 6 does not work.
ringp3ace said:
I know that this may not help, but I've got TomTom MOBILE (App Version 5.200 (4450)) working on the Lobster.
I think you've found out that version 6 does not work.
Click to expand...
Click to collapse
Thanks for that.
It seems that TomTom Navigator 6 is a step backwards. I have had to do a lot of hacking with the software but without success so far although a breakthrough seems close.
Lobster 700TV
Hi ringp3ace
I have now tried TT Mobile 5.2 and yes, it works. I went on eBay and found this software for sale at £22 including PP. If anyone is intrested, there are 4 more left so be quick.
All the best,
Bluetooth GPS
Well, thanks to ringp3ace, I now have fully functional Tomtom Mobile working on my Lobster. Problem is, my bluetooth GPS device (GRB-288), wont play ball. I can pair and connect ok but there's no communication going on. I know there are some bluetooth devices that sulk when they are used with some phones but does anyone know which bluetooth GPS will work with the Lobster?
Regards
I'm having problems installing 5.20 on my Monet - using the download from the tomtom site it instals successfully up to the Jane voice then fails saying it isn't compatible with this device and backs out all the previous instals. Any ideas? I have a proper product key as I bought tomtom 6 for my pda and I can move tomtom 5 to the monet. Cheers
GPS Receiver
leadweight said:
Well, thanks to ringp3ace, I now have fully functional Tomtom Mobile working on my Lobster. Problem is, my bluetooth GPS device (GRB-288), wont play ball. I can pair and connect ok but there's no communication going on. I know there are some bluetooth devices that sulk when they are used with some phones but does anyone know which bluetooth GPS will work with the Lobster?
Regards
Click to expand...
Click to collapse
Leadweight,the Holox BT-321(Ebay)Works brilliant with my Lobster 700TV and TomTom 5.2
Sorry, finger trouble... now working fine using a Haicom HI-303III.
Many thanks to all!
Bluetooth GPS
prusling said:
Sorry, finger trouble... now working fine using a Haicom HI-303III.
Many thanks to all!
Click to expand...
Click to collapse
Thanks for your input but I have already found that the BT GPS 77 device also works well. I now have TT 5.2 running well on the Lobster.
Thanks to all those who helped to bring about this happy event.
Regards,
TomTom6 working (sort of)
I managed to install TomTom6 onto the Monet. It runs OK, but the lack of a touchscreen is the killler though - just too difficult to use without one.
Certain screens require the touch screen (setting up the GPS, selecting a postcode). The fakecursor/touch screen emulator is not an ideal solution either as I can't see how to assign the fakecursor program to a hardkey on the Monet.
I went back to 5.2 which runs fine. 5.0 doesn't as the screen goes garbled.
Can anyone help, I keep getting "set up is not a valid windows ce application" when trying to run tomtom mobile 5.2
hard to say without more info.
sounds like you are trying to run a .exe file on the monet that should really be run on the PC (if its the setup file)
The executable file that should be run on the monet is TomTom Mobile.exe
Can anyone help me,
when trying to install tomtom mobile 5.2 it freezes on the voice selection.
Anyone any ideas
Thanks in advance
ALi
alictait said:
Can anyone help me,
when trying to install tomtom mobile 5.2 it freezes on the voice selection.
Anyone any ideas
Thanks in advance
ALi
Click to expand...
Click to collapse
I have exactly the same problem - freezes on the voice selection. Thanks for any help. Love to get this working
Help with TT Navigator 5.2
To all those how are still trying to get Lobby to play with TT.
First, make sure your Lobster is 'application unlocked' (see start of this thread)
Next, ensure that you are trying to install version 5.2 of TT Navigator and that it is a Windows Mobile version (there are several versions). The Symbian version for some phones will load but not run.
Once loaded correctly, TT Navigator 5.2 will self install from the software loaded to the phone using the HOME application on your PC. This application will 'see' the connected Lobster and memory card.
I have spent hours trying to find the 'secret' and I can tell that it does work. If you read through this thread you will find others that have too.
If you still have problems, let me know
Regards
Thank you for the help Leadweight
When you say HOME application on the PC, what do you mean?
Many thanks again
Elbow
Thanks again Leadweight
Reading what you said and some of the other posts I now have it working on the Lobster - taken me hours but it is pretty impressive...
Cheers
Elbow
Well done
Elbow777 said:
Thanks again Leadweight
Reading what you said and some of the other posts I now have it working on the Lobster - taken me hours but it is pretty impressive...
Cheers
Elbow
Click to expand...
Click to collapse
Well done. Yes I was very pleased to get it up and running. Its very handy thing to have on a phone.
Regards
Elbow777 said:
I have exactly the same problem - freezes on the voice selection. Thanks for any help. Love to get this working
Click to expand...
Click to collapse
Needed to create a tomtom folder within my documents section of the phone and install the data.chk file.
Sorted !
Related
I get a "failed to create empty document" using quickgps under the new WM6.1 DCD rom 2.1. I tried the registry hack and verified that the region says US. Is this just incompatible with this version of WM at this point? Still uncertain if it really helps with initial lock but would like to try. Thanks.
shadowreader said:
I get a "failed to create empty document" using quickgps under the new WM6.1 DCD rom 2.1. I tried the registry hack and verified that the region says US. Is this just incompatible with this version of WM at this point? Still uncertain if it really helps with initial lock but would like to try. Thanks.
Click to expand...
Click to collapse
i am not familiar with quickgps and im just guessing here, but does it require sqlcemobile maybe?
Use the patched quickgps and registry settings here:
http://forum.xda-developers.com/showpost.php?p=1862269&postcount=2
You will need registry edditing software such are resco to import the reg file. I used to use the free PHM regedit, but it is not capable of importing .reg files. So I installed Resco file explorer/registry editor and it is well worth the $25.
i stuck these into the original cab here:
http://forum.xda-developers.com/showpost.php?p=1880584&postcount=61
install and run. all credit to TalynOne, awesome job.
Thanks guys, I did use the one on the referenced thread but I will try the new cab. thanks.
Thanks DCD, you da man. That cab worked awesome. will see if it helps cold start gps lock. I am loving my new Mogul more and more every day much of it thanks to you and this forum. Your WM6.1 ROM is sweet and the help I've gotten here has been great. Thanks.
shadowreader said:
Thanks DCD, you da man. That cab worked awesome. will see if it helps cold start gps lock. I am loving my new Mogul more and more every day much of it thanks to you and this forum. Your WM6.1 ROM is sweet and the help I've gotten here has been great. Thanks.
Click to expand...
Click to collapse
thank you, but please thank TalynOne for this one, all I did is drag and drop a couple files he was nice enough to provide.
Well let's see, the program dumps ephemeris data to a file called: xtra.bin
If you grep the gps drivers (and or the entire roms we use) you will find ZERO references to this file. So, congragulations, you're running a program which is entirely worthless on our device with our current drivers.
Just in case someone didn't understand that, this is not supported by our gps driver, it does nothing for us.
Yeah, if QuickGPS data is actually used on a cold GPS boot is unknown. That's why I wrote the warning in the FAQ that it hasn't been verified that QuickGPS actually does anything. A couple of people indicated that it does, but it may be due to a soft reset. I'm wondering shadowmite, do you know if there are any references to the xtra.bin file in the Kaiser GPS drivers?
I'm trying to determine that now, unless this quickgps app loads it directly into the gps's memory (which is possible, there is a reference to the port in the exe file) it doesn't do anything. I'm taking it apart trying to decide.
after playing a little more, it seems i am not getting a fix any faster, but i am picking up more sats- 10 now, ive always seen 4-6 before. but, maybe its just the conditions outside? im awaiting shadowmite's results.
It seems to be making a big difference for me. After a soft reset I'm getting an initial lock in tomtom in under 10 seconds indoors. Prior to running download in the exe it was taking a few minutes if it would get an indoor lock at all.
i'm too lazy right now to go outside and test this. just wondering if this is a standalone app that activates gps, or if it just updates sat data. i've gotta go grab some food soon so i might just find my answer.
Supposed to just download satellite position data I believe to help lock faster but as Shadowmite said, it is still unclear if it helps on the Titan.
Hey Shadowmite, firstly I just want to thank you also for everything you have done for all of the smartphone groups. I have been a big fan since your days on the treocentral forums helping us all with the Treos. The quickgps may be just a placebo effect but I never used to be able to start up a native gps satellite sync indoors in my home office. I used to have to go outside to start up then come inside and it would sometimes keep a satellite or two locked. Now I can get initial sync inside even after a cold start. I do notice that occasionally I have to soft reset to get the GPS kick started as it occasionally isn't recognized by TomTom even using the astrogpslauncher app. Obviously this isn't scientific and I will wait to see what your dissection shows. Thanks for working on this. One other question for you programmers, would it be feasible to create some kind of external LED sequence or task bar icon that would indicate that the GPS is active and/or locked on satellites? Right now it requires an app. I know you guys aren't just sitting around waiting for people to suggest new functionality but it's just an idea to throw out there. Thanks again.
I don't think it will help, while both Titan and devices like Kaiser use Qualcomm MSMs, they do so in completely different ways. The CDMA gpsOne spec doesn't need to know what satellites are in the sky... it can pull that data from the network.
I think the major GPS delays on Titan are bugs in the radio stack... HTC has never tried to enable gpsOne on CDMA2000 before, and there are likely to be many bugs. If there weren't, well, we would have had GPS on the Harrier.
dcd1182 said:
i stuck these into the original cab here:
http://forum.xda-developers.com/showpost.php?p=1880584&postcount=61
install and run. all credit to TalynOne, awesome job.
Click to expand...
Click to collapse
Thanks a ton. This worked perfectly. It took me 15 minutes to get a fix this morning with no quickgps but only 1 minute after installing this cab.
I had installed the quickgps.cab I downloaded 6 months ago but got the "connection failed" message. Thanks dcd1182 and TalynOne for making this available.
jamespaulritter said:
Thanks a ton. This worked perfectly. It took me 15 minutes to get a fix this morning with no quickgps but only 1 minute after installing this cab.
I had installed the quickgps.cab I downloaded 6 months ago but got the "connection failed" message. Thanks dcd1182 and TalynOne for making this available.
Click to expand...
Click to collapse
Geez, bump.
First off let me say GREAT JOB by DCD and Co... I'm a former 6700 user (used to mod over at PPC6700users) and just recently upgraded to the Mogul... I'm new to the whole kitchen thing and with ease was able to use the new kitchen 2.3.0... Again, thanks to DCD and all other who contributed... I cannot begin to express how much we all appreciate the hard work and support you guys provide us...
Now to the question:
As mentined earlier, I have recently updated to 2.3.0 and as well updated the radio to 3.27.00... For some reason I am not able to get a lock with GPS... Can any one assist...?
I'm not sure if I missed something somewhere (the search feature in this forum is not the greatest). I have searched high and low with no luck...
Thanks in advance...
1st time take long time, u need to leave it outside running for 30 minutes and connect using GPS Immediate Driver.
Also, try making a couple of calls from your Mogul and let it connect to the call for a couple of minutes. Mine wouldn't get a lock until I made a phone call. Maybe, it needs to register your location thru whatever cell site it connects thru. Although, that's just my own opinion, not really sure, but after I made a few calls, Google maps found me in less than a minute.
AstronusX said:
1st time take long time, u need to leave it outside running for 30 minutes and connect using GPS Immediate Driver.
Click to expand...
Click to collapse
I didn't know it would take that long... I had read previous post where people said it connected within a minute but sure enough I set it by the window went and had dinner and there they were, 4 pretty little satelites waiting for me when I checked...
I guess I was too impatient... ;O)
Thanks to both for the advise... Let me learn my way around this mogul and who know's, maybe one day I can return the favor...
DV8Ways said:
I didn't know it would take that long... I had read previous post where people said it connected within a minute but sure enough I set it by the window went and had dinner and there they were, 4 pretty little satelites waiting for me when I checked...
I guess I was too impatient... ;O)
Thanks to both for the advise... Let me learn my way around this mogul and who know's, maybe one day I can return the favor...
Click to expand...
Click to collapse
You can always warm up the GPS with software.
GPSLAUNCHER is to warm up the GPS to work with Tom Tom. This application launches Tom Tom after it warms up the GPS.
Just extract and copy to your device -- \windows\start menu\programs
GPSVIEWER1.5 is for other applications such as google maps and so on.
This one is installed through your computer ( I believe )
If you need assistance feel free to ask.
Excellent... I'll give it a try...
Does 2.3.0 have aPGS enabled by default?
If not, go to HLKM\Software\HTC\SUPL AGPS
Set GPSMode to 4
Also, I would find and install QuickGPS.
Give that a shot and see if it speeds up your locks
Got GPS Working on VZW XV6800
I followed all the instructions:
Installed latest Unlocker (Hard-SPL-240-MFG.exe)
Installed latest Radio (Titan_Radio_3.27.00.exe )
Install DCD 2.3.1 (downloaded from this link): Size=37.16Mb
http://www.fileshex.com/download.php?file=1426af0da72a82fe758300e3980f7520
Got everything up and running. (Following directions from XDA forums)
Couldn't make a phone call. Send an SMS, or search the net on IE.
Figured out I needed to call Verizon for an A-key. (Authentication Key)
She asked why i needed it and I told her "i am doing some Windows Mobile sftware developing and had to do multiple HARD resets throughout the day). She said no prob and talked me through the A-key entry using ##778(I think its that. dont worry, CS will talk you through without hesitation.
Anyway. make sure you write the A-key down when customer service gives it to you cause its suppose to be the one assigned to your Phone number and should work every time you need to enter it. If it doesn't then just call them back and give them the same story and they will give you another A-key.
that fixed the data connection problem.
BTW: upgrading the Software deleted my Data connection password and user name.
Password is (Your 10 digit [email protected]) password is (VZW).
NOW, i am back to working conditions and DCD 2.3.1 is awesome.
Love the Iphone style SMS conversation format. Lets you view each conversation you have with a person in a straight separate list of texts. no more need to hop back and forth between Sent Box and Inbox to decipher conversations.
SO, everything works EXCEPT GPS. had all the settings right. like Location ON in Setting, Phone, Services Tab, Click on Location Settings, Get Settings, select "Location ON". Had Com 5 selected on software in external GPS settings. Hardware set to "None" 4800 Baud. Still nothing.
Google Maps keeps showing that its searching for satellites but to no avail.
Finally, came across a post about a free program called "GPS Today" Looked cool so gave it a shot.
Sure as **** it worked immediately. Got 5 satellites connected and there was the little blue dot on top of my house!!! YEEE HAAA
After a little trial and error i figured out the program.
Still i wanted Google Maps to work with GPS.
BA BA BA BAAAAAAA! I turned on Google Maps and all of a sudden it picked up 5 satellites and I was up and running.
Bottom line, I think GPS Today did something and it got Google Maps to start using GPS.
THANK YOU TO ALL WHO PUT UP AWESOME POSTS.
I think I might be retarded...
I did everything I think I was supposed to do, I unlocked, flashed the radio, then flashed DCD's ROM...
My screen says:
ROM Version dcd2.3.1
Radio Version 3.27.00
but, I can't get the GPS to work with TomTom6...
I tried using the GPSLauncher, AstroGPSLauncher, and QuickGPS...
Any ideas?
ajshah said:
I think I might be retarded...
I did everything I think I was supposed to do, I unlocked, flashed the radio, then flashed DCD's ROM...
My screen says:
ROM Version dcd2.3.1
Radio Version 3.27.00
but, I can't get the GPS to work with TomTom6...
I tried using the GPSLauncher, AstroGPSLauncher, and QuickGPS...
Any ideas?
Click to expand...
Click to collapse
check out this thread... on post 19
http://forum.xda-developers.com/showthread.php?t=371849&page=2
It will answer all your questions about GPS with Tom Tom
Everything seems to be in order now... Thanks everyone for all the advise... Now I'm going to play around and find an app that I like... I've tried TomTom (don't like it)... GoogleMaps is very basic but to be honest I'm looking for something a bit basic but functional as well which gMaps is not that functional as a GPS software plus it downloads from the net which seems to be a bit laggy... I'll find something but suggestions are welcome too...
Thanks again everyone...
DV8Ways said:
Everything seems to be in order now... Thanks everyone for all the advise... Now I'm going to play around and find an app that I like... I've tried TomTom (don't like it)... GoogleMaps is very basic but to be honest I'm looking for something a bit basic but functional as well which gMaps is not that functional as a GPS software plus it downloads from the net which seems to be a bit laggy... I'll find something but suggestions are welcome too...
Thanks again everyone...
Click to expand...
Click to collapse
When asking for help, would it be helpful to let others know what you are looking for in a GPS software? Basic but functional isn't a very good description.
TomTom6 paired with AstroGPSLauncher is a great combination. I don't have to start GMaps or other program to get the GPS going, I have GPS that doesn't have to have a data connection, for when I'm in the U.P. and there is no signal.
GoogleMaps is Basic in the sense that it is a 2D Map, which I like for use on the phone... Let's face it, this phone has a lot going on in the background besides just the GPS and Map app which to me makes it a bit slow and less responsive than normal when trying to process the graphical 3D maps... I don't need 3D mapping, virtual views or anything like that... A 2D Map is perfect... but GooleMaps lacks TTS, a decent search engine, Route recalculation, etc... which are characteristics of a good GPS unit... I like MioMaps for the fact that you can change your means of trasportation from car to bus to taxi to bike to pedestrian, etc, etc, etc... These types of options make more sence to me on a mobile device such as our phones since we could be traveling and need to switch from one means to another...
I'm going to look into MioMaps and see... but in the mean time, if anyone has other suggestions or experience with MioMaps on the Titan, your input would be greatly valued...
Keep on cookin'...
DV8Ways said:
but in the mean time, if anyone has other suggestions or experience with MioMaps on the Titan, your input would be greatly valued...
Keep on cookin'...
Click to expand...
Click to collapse
Hey... I think I remember you as "davidew98" on PPC6700users... am I right? We had all kinds of fun trying to dissect the 6700 through QPST... still have the thread bookmarked in Firefox.
I'll throw in a plug for Odyssey Mobile (http://www.infogation.com) as a navigation program that I really like. It came bundled with my Holux GPSlim 236 BT unit that I bought after I gave up on getting internal GPS to work with the 6700. The only thing it's missing that the others like TomTom have is text-to-speech... it doesn't say "Turn right on Main Street" but instead just says "Turn right in 200 feet". Other than that it does everything else really well.
And, I have had zero problems with it working with the 6800's internal GPS... just point Odyssey at COM port 4 and it just works... no launcher or "priming" required.
answerman said:
Hey... I think I remember you as "davidew98" on PPC6700users... am I right? We had all kinds of fun trying to dissect the 6700 through QPST... still have the thread bookmarked in Firefox.
I'll throw in a plug for Odyssey Mobile (http://www.infogation.com) as a navigation program that I really like. It came bundled with my Holux GPSlim 236 BT unit that I bought after I gave up on getting internal GPS to work with the 6700. The only thing it's missing that the others like TomTom have is text-to-speech... it doesn't say "Turn right on Main Street" but instead just says "Turn right in 200 feet". Other than that it does everything else really well.
And, I have had zero problems with it working with the 6800's internal GPS... just point Odyssey at COM port 4 and it just works... no launcher or "priming" required.
Click to expand...
Click to collapse
Nah, I had the same handle on PPC6700Users that I have here... Same name different forum... ;O) Thanks for the recommendation... I'll definitely have to check it out...
Hello ,
I did installed the IGO navigation software and I can't open the application .
I got the icon on today , the icon in programs , but no chance to start it. Does not react to any enter , click or anything?
Anybody does have the same problem?
theaxter said:
Hello ,
I did installed the IGO navigation software and I can't open the application .
I got the icon on today , the icon in programs , but no chance to start it. Does not react to any enter , click or anything?
Anybody does have the same problem?
Click to expand...
Click to collapse
Yes, Many, many people had this issue and asked the same question. Have you read ANY of the AP4 threads?
It seems based on what I read, that if you uncheck/remove the HTC home screen form the today screen you may get it to work. Not sure as I don't use IGO, if that doesn't work check the various AP4 threads or search the threads
Good Luck!
Agreed I found that disabling the HTC Home plugin allowed iGO8 to run; others have found it necessary to disable Touchflo as well.
I assume you have a legitimate version? The cracked versions can be much more troublesome
NeilM said:
Agreed I found that disabling the HTC Home plugin allowed iGO8 to run; others have found it necessary to disable Touchflo as well.
I assume you have a legitimate version? The cracked versions can be much more troublesome
Click to expand...
Click to collapse
Not touchflo, but vueflo. I had some problem with screen orientation when i tried to start the app...
igo 8 touble
had to go back to ap 3 dual, igo is my main app and with ap 4 has probs
gtm55 said:
Not touchflo, but vueflo. I had some problem with screen orientation when i tried to start the app...
Click to expand...
Click to collapse
In settings I did tried to stop it , but there is no aption. Either touch or Vue Flo
eagle 1 said:
Yes, Many, many people had this issue and asked the same question. Have you read ANY of the AP4 threads?
It seems based on what I read, that if you uncheck/remove the HTC home screen form the today screen you may get it to work. Not sure as I don't use IGO, if that doesn't work check the various AP4 threads or search the threads
Good Luck!
Click to expand...
Click to collapse
I did remove it. Does not work. I did tried to launch the IGO 8 from the today , menu , own folder , programs. Always , no result
with the keybord pressing enter...same.
Is not a legitimate copy, but installed on a Asus 636 works smoothly but not on a real PDA/UMPC
theaxter said:
I did remove it. Does not work. I did tried to launch the IGO 8 from the today , menu , own folder , programs. Always , no result
with the keybord pressing enter...same.
Is not a legitimate copy, but installed on a Asus 636 works smoothly but not on a real PDA/UMPC
Click to expand...
Click to collapse
1)disable htc home in today settings
2)softreset
3)disable vueflo from settings/system/athena config app (optional) it may work without this step
4)start igo
gtm55 said:
1)disable htc home in today settings
2)softreset
3)disable vueflo from settings/system/athena config app (optional) it may work without this step
4)start igo
Click to expand...
Click to collapse
I've got the info that the last try was unsuccessful , then the splash screen and the application start , but then it goes back to today with no change
anything else that I can check in the settings? I did tried to start the application in 2 resolutions 9medium and low)
theaxter said:
....
Is not a legitimate copy, but installed on a Asus 636 works smoothly but not on a real PDA/UMPC
Click to expand...
Click to collapse
I really don't think we should be providing technical support for warez
apd said:
I really don't think we should be providing technical support for warez
Click to expand...
Click to collapse
It's not warez mister Legally Advisor. I assume that you have no demo on your computers / pda . You paid for everything that you are using , and did not remove the commercials from the free items like YM etc.
In this real world , sometimes you have to get first something , see if is working , then when the trial is done , you decide to buy or not to buy. I do not want to put 100 Pounds in something before I see it working.
But I am sure that you are some ASDA customer and you got the PDA from your employer so this problems are not common to you. Please keep away from the posts that are not for you. This is not a food thought forum. Thanks
theaxter said:
. This is not a food thought forum. Thanks
Click to expand...
Click to collapse
Here's some 'food thought' for you.
Your exact words were 'Is not a legitimate copy'. Therefore you are using warez. The demo version is legitimate.
apd was quite correct to point out that we will not provide support for warez. We also won't help those with bad attitude, so you are SOL.
Bye.
gtm55 said:
1)disable htc home in today settings
2)softreset
3)disable vueflo from settings/system/athena config app (optional) it may work without this step
4)start igo
Click to expand...
Click to collapse
I couldnt get australian maps till recently and following above instructions with "evaluation"version of Igo8 am running it on ap4 without htc home.
I like it better than Igo2006se as reattaching the keyboard doesnt stuff up the controls.
Also I can change the orientation of the screeen and Igo remains in landscape whereas Igo2006 would again stuff up.
lakeman said:
I couldnt get australian maps till recently and following above instructions with "evaluation"version of Igo8 am running it on ap4 without htc home.
I like it better than Igo2006se as reattaching the keyboard doesnt stuff up the controls.
Also I can change the orientation of the screeen and Igo remains in landscape whereas Igo2006 would again stuff up.
Click to expand...
Click to collapse
Unfortunately it does not work , so I had to downgrade to AP 3.5 that sucks and the resolution even more The splash screen was showing up and the App Ini as well , next step the IGO was gone
Pantaloonie said:
Here's some 'food thought' for you.
Your exact words were 'Is not a legitimate copy'. Therefore you are using warez. The demo version is legitimate.
apd was quite correct to point out that we will not provide support for warez. We also won't help those with bad attitude, so you are SOL.
Bye.
Click to expand...
Click to collapse
Do not worry , nobody is asking you. Stay calm and chew your frustrations in other threads.
theaxter said:
Do not worry , nobody is asking you. Stay calm and chew your frustrations in other threads.
Click to expand...
Click to collapse
Funny that you're getting so angry if your software is legal...."is not a legitimate copy" were your words.
If warez are condoned on this site, it will eventually have problems. and then we all lose out. Go reflect on that and try not to be quite so sanctimonious next time.
apd said:
Funny that you're getting so angry if your software is legal...."is not a legitimate copy" were your words.
If warez are condoned on this site, it will eventually have problems. and then we all lose out. Go reflect on that and try not to be quite so sanctimonious next time.
Click to expand...
Click to collapse
Really .... OMG ?! And who will come to inspect my PDA around the world ?! I think that you have a problem called frustration , cause you can't find cheap software. Try with doctor Phil ....
An intersting scenario I found when on holiday in Slovenia this week- in a quiet moment, I installed the Manila Dialler (I'd never tried it before!); I then forgot I'd done it.
I then needed SatNav in a hurry due to some roadwords and lack of road signs- could I get iGO8 to start? No Soft reset, tried disabling all Today Items, disabling VuFlo- still nothing. Gave up.
Got back to hotel and decided to look in ' Remove Programs' then remembered the Manila Dialler. Removed it, and iGO worked again
So, iGO8 in AP4 doesn't like Manila, or HTC Home, but for me is OK with VuFlo active.
i have been tryin to read everything i can to understand these phones..... this is my first PPC and i have had it about a month. i just figured out the compact framework to 3.5 to get other apps. so please dont flame
on to my question.... i just downloaded the pandora cab from the software thread and everyone is sayin its not a VGA version.....not to sure on that. when i opened the app everything is super small and the pictures are all out of place. am i doin everything right here???
sprint touch pro
A couple things...
The radio version of your phone (GSM vs CDMA) has nothing to do with the Pandora ap.
Secondly, what everyone is telling you about it not being VGA is correct. That's why the pictures are small and screwy.
That is as good as it gets until they decide to fix it... at least it still works.
thanks for your help.....so can i use apps from just the CDMA thread or i can go to Raphael software and use those too???
It depends on what the application does.
Think of it this way...
Your phone is like a Dell Computer running XP.
Any program designed to run on XP will work, but if the program is strictly for Dell Computers, it will only work if you have a Dell.
CDMA or GSM is like the Dell Computer part of it.
Any application that is designed to run on a PPC/WinMobile will work on your phone.
But if the application is designed for a specific brand... like unlocking the GPS feature on a VZW Touch Pro, or a custom ROM for the ATT Fuze, you don't even think about running it unless you've got that exact model or you're willing to brick your phone.
Hope that helps.
BottleFed said:
i have been tryin to read everything i can to understand these phones..... this is my first PPC and i have had it about a month. i just figured out the compact framework to 3.5 to get other apps. so please dont flame
on to my question.... i just downloaded the pandora cab from the software thread and everyone is sayin its not a VGA version.....not to sure on that. when i opened the app everything is super small and the pictures are all out of place. am i doin everything right here???
sprint touch pro
Click to expand...
Click to collapse
Does the whole song play and if so, please share the version of Pandora you are running and if you have loaded any programs on your phone besides this or not.
Lots of us are having issues with it only playing partial songs and then skipping to the next track.
Thanks!
it doesnt play the whole song everytime...... this is what i used
http://forum.xda-developers.com/showthread.php?t=457570&highlight=pandora&page=3
post #29
got stock sprint rom
.net configuration
wifi toggle
adv config
apptodate
barcorama
batti setting
S2U2
scanlife
slingplayer
starplayer
htorch
That's as good as it gets for now.
Dudes! try this thread out!
I am as I type flawlessly using the PPC app for LastFM.
Ooops, forgot the URL hehe.
http://forum.ppcgeeks.com/showthread.php?p=631012#post631012
MauiKeitai said:
Dudes! try this thread out!
I am as I type flawlessly using the PPC app for LastFM.
Ooops, forgot the URL hehe.
http://forum.ppcgeeks.com/showthread.php?p=631012#post631012
Click to expand...
Click to collapse
i just dl the cab......... it has way better sound and is just like pandora.....looks a little cheap but it work.
thanks
wat gps works on the touch pro besides google maps and live maps ? ii heard igo8 and garmin work but havent found any solid leads could anybody point me in the rite direction thanks .
ps. if you know were i can download any of them pm me plz
Are you only looking for free software?
If your not, I use Tomtom which works well http://www.tomtom.com/
also I'm fond of GPS tuner http://www.gpstuner.com
Cheers
yeah im lookin for a craked version of igo8 or tom tom
any GPS software will work, I run Garmin XT
and I wouldnt ask for cracks on this board.
I don't know of a WM GPS package that does not work on the Touch Pro.
It's really a matter of finding which has the features you want from the many that are available.
If it might help you any, I made a list comparing features of Garmin Mobile XT versus Telenav versus Sprint Navigation here.
I could include other GPS navigation packages in that list if anyone else has used another enough to provide a response for each feature listed. Anyone with that knowledge can just leave a reply there in that thread and I'll update the initial post with the data when I can.
I got one that works just fine for me and I hope it helps you as well
I too run Garmin. Has anyone running Garmin noticed a slight lag with it or am I the only one?
Depends on the outcome youa re looking for
I use Live Search to get directions and to get posotions. The price is right and it has a cool speach feature that works well. If you want to track positions and loge where you are and were then I have found a great package that is free. Everytrail.com
Live Search : http://loco4local.com/
EveryTrail.com Cleint : http://www.everytrail.com/winmobile/
Again all are free.....
Jay
Anyone know where or if its possible to get a telenav download for free I'm new to windows mobile