What is this file ???
Is it aku 3.3 in english or russian????
-----------------------
MODERATOR EDIT:
Changed the subject, use this as the main thread to discuss HTC 2.05 WWE AKU 3.3 ROM issues.
Download and ROM details in the wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
BE SURE TO READ THE WIKI BEFORE ASKING QUESTIONS PLEASE
English.
If you need Russian one look for it in Upload/Temp directory
It is in English, I just flashed it using 1.10mfg method
An still no MUI I presume ?
What Where Who Its New The Wwe Version?
Plz Give The Link And Why Dont You Say Anything?
bubu23 said:
What Where Who Its New The Wwe Version?
Plz Give The Link And Why Dont You Say Anything?
Click to expand...
Click to collapse
ftp://ftp.xda-developers.com/Uploads/Hermes/
Here you have.
BuT WhY TyPinG LikE ThAt ! Are YoU PaRkInsOn ?
Is it from HTC or cingular? I've heard both are about to release an AKU 3.3 rom
loll no im not parkinston maybe my keboard is
but why the file finish with test?
its not good its just test???
plz tell me im horny on that fileee(rom)
English confirmed.
Just flushed OS and Ext rom.
ROM Version:2.05.255.1
ROM Date: 01/17/07
ExtROM Version: 2.05.255.101
OS 5.1.461 (build 15671.3.3.0)
I can't get to FTP :/ what user and password ?
reg
Sar
Username = xda
Password = xda
You get to the ftp by this link no pass needed...
ftp://xda:[email protected]/Hermes/
Cheers
Seems very fast...
cant see where it says TEST though. My of been a test for the carriers, so likely the RTM for the carriers to then implement.
So far, so good... at least this one is english, unlike the Swedish update i did yesterday
in the ftp thers only the swedish rom i cant find the wwe rom??
RUU_Hermes_2.05.263.1_6275_1.34.00.10_108_SVE_HTCEUR.exe is now up... Guessing it is an official release from htc?
Cheers
Well i flashed it also.
the Test is included in the splash.bmp. =)
really... But imho the swedish one is a bit faster, but that is just subjectiv i didnt tried to test it with a benchmark program.
btw. any update from cingular?
Somethings fishy about this.
This is supposed to be AKU 3.3, but theres no WPA2 support???
not sure this is a complete ROM?
Does this mean MS Voice Command over bluetooth is fixed without the hacks?
I have detect problems with this rom! Is better wait for another!
Problems detect:
- No wpa2
- Phone connection always breaking down
- Can't go to my contacts!
- ActiveSync always says pocket is out of memory (yes I reset several times)
Flash Using Lnb
This is my first time flashing using lnb and i followed the wiki about using mtty..i just wanted an experimented persons to examine the output of mtty and tell me if the update was perfectly done and if there was no problems in nand please...
Thanks
Iverson....
USB>
USB>task 32
Level = 0
USB>task 28
Storage format start
Write Nand Success
dwBlockToWrite = 13
Storage start block: 461
Storage Total block: 475
Total Bad Block in CE: 0
NeedToEraseBlockStart: 474
Storage format success
USB>lnb 06_OS.nb
:F=06_OS.nb
:A=501A0000
:O=00000000
:L=FFFFFFFF
start NB image downloadSH
Load ADDR: 501A0000 Length: 3C0C800
*********************************************
*********************************************
*********************************************
*********************************************
*********************************************
*********LAST BLOCK, dwBytesCollected=0x13800
Code entry point at 0x53DA0000
Write Nand Success
USB>task 28
Storage format start
Write Nand Success
dwBlockToWrite = 13
Storage start block: 473
Storage Total block: 463
Total Bad Block in CE: 0
NeedToEraseBlockStart: 486
Storage format success
USB>
Related
Hi all,
i'm just about to flash my pda.. and i'd like to know if what i've done so far is correct:
first af all, my Qtek2020 is German, and the first OS was German. When i upgraded to 1.72.128 ITA i rembember i changed the language by using ER2k3 Edit..
now, i've downloaded SinMerged 1.x and extracted all the files.
then i've opened all of the 3 files (ext rom, radio and rom image) with er2k3edit and changed the "language" field from WWE to GER
i've also edited the field "Operator" and changed from O2 to Qtek
i wonder if it's correct...
Oh PS: btw do you know any program do backup SMSs? thx!
you can check what your qtek is now by running getdevicedata.
just to be sure it is a GER Qtek.
thanks for the advice..
i'll let you know asap
here's what i got:
Code:
U S B 3 2 1 . 7 2 . 0 4 I T A P H 1 0 Q t e k I T A 1 . 7 2 . 1 2 8 1 . 1 4 . 0 0
so language id is ITA :/
mmm i tought it was GER.. anyway.. is it correct to edit those fields on each of the 3 roms (radio, main and ext) ? or just on the main one?
thx again!
Edit on all three, I never tried otherwise.
some side information :
* All 3 upgrades (nk, radio,ms) have an operator and language which has to be the same as your machine.
* ms has also another operator and language your machine will change into when you upgrade
These are located on offset 74 and 94 in the decrypted MS_.nba
http://forum.xda-developers.com/viewtopic.php?t=12101&start=0
If you don't want to change the operator and language in your machine, for guarantee reasons, you should follow DCS's post about country code error.
Although downgrading to your official rom might also be possible if you modify its headers with ER2003Edit. But sometimes a downgrade is no longer possible before claiming guarantee.
First of all .. my thanks goes to all the people to this forum!
You're really GREAT !!
In any case sorry for my poor english :wink:
I've few questions ...
I've read many many pages but I can't understand the right procedure to follow for dumping my Himalaya original ROMs because in some pages the "d2s" command is followed by some numbers and in other, by other numbers ... confusion bring me !
After that, otherwise, I've tried to follow the XDA II procedure and the storing procedure to SD seems to be ok .. but when I try to save the rom dump from my SD to PC using ntwr (otherwise was unreadable in Win), I've got a read error but, in any case, I obtain only one file on my PC of about 400 MB and I suppose that something is wrong because all of you speaks of about 50 MB ... so ... What's the right procedure with the right command? How can I be sure that my dump is correct? The dump it's only one file or one for separate ROM Radio and Extended?
When I solve this issue I can try to upgrade my Himalaya to WM2005.
Thank you for your help.
Please help me, I'd like don't lose my guarantee.
This post was submitted also to buzz forum
Now this is the situation ...
Qtek 2020 - 1.66.04ITA
-= Preparing the device =-
01 ) I,m gone to Bootloader (Power + Directions + Reset)
02 ) I see on the device "Serial v1.06"
03 ) I stop MSSync service Ctrl+Alt+Canc and stop wcescomm.exe
04 ) Put device on cradle
05 ) Now I see on the device "USB v1.06" instead of "Serial v1.06"
06 ) Put the 512 MB SD into the device
07 ) Start Mtty 1.42
08 ) Leave as is all the parameters
09 ) I've "USB" port (and not ".WCEUSBSH001") and I press USB
10 ) Ok seems to be connected to the device
-= Dumping the ROM on SD =-
11 ) Into mtty command line I write (and not copy and paste and without "sd a" at the end)
d2s 80000000 02000000
12 ) Device tell me % of work while in mtty I found
SD:Waiting for card insert.........
CMD3 for SD, it's OK, ready to get RCA from response.
SD : Detected one card
SD : ready for transfer OK
pc->drive.total_lba=EEC00
pc->drive.num_heads=0
pc->drive.sec_p_track=0
pc->drive.num_cylinders=0
pc->drive.block_size=200
pc->drive.features=0
pc->drive.RCA=B368
pc->drive.drv_type=40000000
pc->drive.securedAreaSize=0
pc->drive.securityDrv=0
pc->drive.busWidth=1
pc->drive.erasedSize=0
Total card size=1DD80000
SDCARDD2S+,cStoragePlatformTyp e=FF
****************************** ****************************** ****************************** ****************************** ********
Store image to SD/MMC card successful.
USB>
13 ) Then I write
d2s 60000000 00300000 sd a
14 ) Device tell me % of work while in mtty I found
SD:Waiting for card insert.........
CMD3 for SD, it's OK, ready to get RCA from response.
SD : Detected one card
SD : ready for transfer OK
pc->drive.total_lba=EEC00
pc->drive.num_heads=0
pc->drive.sec_p_track=0
pc->drive.num_cylinders=0
pc->drive.block_size=200
pc->drive.features=0
pc->drive.RCA=B368
pc->drive.drv_type=40000000
pc->drive.securedAreaSize=0
pc->drive.securityDrv=0
pc->drive.busWidth=1
pc->drive.erasedSize=0
Total card size=1DD80000
************
Store image to SD/MMC card successful.
USB>
15 ) Then I write
d2s 70000000 01080000 sd a
16 ) Device tell me % of work while in mtty I found
SD:Waiting for card insert.........
CMD3 for SD, it's OK, ready to get RCA from response.
SD : Detected one card
SD : ready for transfer OK
pc->drive.total_lba=EEC00
pc->drive.num_heads=0
pc->drive.sec_p_track=0
pc->drive.num_cylinders=0
pc->drive.block_size=200
pc->drive.features=0
pc->drive.RCA=B368
pc->drive.drv_type=40000000
pc->drive.securedAreaSize=0
pc->drive.securityDrv=0
pc->drive.busWidth=1
pc->drive.erasedSize=0
Total card size=1DD80000
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=EA0000
All:dwSize=1F20000
****************************** ****************************** ******
Store image to SD/MMC card successful.
USB>
-= Saving ROM from SD Card to PC =-
17 ) Put the SD Card into a Card Reader
18 ) Go to Dos command line into ntrw path
19 ) Type "ntrw read ROM.nb1 H:" where H: is the Card reader drive
Now start the problem ... :shock:
I want to know if it's all ok with this process ...
The output of ntrw is:
NTRW 2.0
Removable media
Cylinders: 0:60
TracksperCylinder: 255
SectorsPerTrack: 63
BytePerSectors: 512
bufsize is 65536
500629504 bytes written bytes: 0
ReadFile(): ROM.nb1 -- Parametro non corretto
First signal of some error but someone tell that's ok!
And then I see prompt.
Now I find the file ROM.nb1 that is 477 MB (like the SD size after a FAT format).
It's ok? ... I don't think so .. but let's going on!
I open the file with an HEX Editor and the file seems ok but after a string like HTCE the file contains all 00h.
Can I cut off that part?
How can I ensure myself that's all ok?
Come on guru don't leave me with the bootloader splash screen instead of the MAGNETO one :lol: :lol: :lol:
Thanks to rhmartin's help (on buzzdev.net) I've reach this situation ..
I've got my dumped rom in SD and in a file.
But ...
I acquire more information about my Qtek 2020 (XDA2):
ROM: 1.66.04ITA
Radio: 1.10
ExtROM: 1.66.148
I think that's a WM2003 (not SE), isn't it?
In any case ... I put back my dumped roms in SD and followed the procedure for rom restore:
1 - Bootloader
2 - Put SD into device
3 - Wait for "Press Power Button"
4 - ecc. ecc.
But I never reached number 3, what's wrong?
I've put back the dump as a single file (as ntrw output give to me), it's correct or I must put it back (and so backup first in that way) as 3 separate files?
I've seen that in download area there's no WM2003 dumped rom, so I search by myself and I found RUU172128ITA (1.72 ITA) but I prefer if my backup can be useful for disaster recovery and can be used for my original version backup.
I think that you understand my situation .. I prefer ask before a not funny situation instead fill the forum with hundreds emergency posts.
I hope you think I've reason.
Thank you for the patience and sorry for possible misunderstandings or english syntax errors!
NO ONE CAN HELP ME ... INCREDIBLE!
I'm ready to ask sorry but ...
There's no one in this great forum that can help me ...
IT'S INCREDIBLE !!! :shock: :shock: :shock:
I don't think that no one haven't my problem ...
PLEASE SOMEONE HELP ME
:evil:
Hello,
Anyone interested in porting linux to HTC Hermes? The Samsung processor is currently supported by vanilla 2.6 kernel
I tried running GNU HaRET 2006070419 version, here's the output of some commands:
Code:
# telnet 192.168.1.23 9999
Trying 192.168.1.23...
Connected to 192.168.1.23.
Escape character is '^]'.
Welcome, this is GNU/HaRET running on WindowsCE v5.1
PocketPC
HERM200
Minimal virtual address: 00010000, maximal virtual address: 7fffffff
CPU is ARM ARM arch 4T stepping 0 running in system mode
Enter 'HELP' for a short command summary.
-----------------
FB1: form=1 bpp=16 fbaddr=4E800000/10800000 x=240/2 y=320/480
FB0: form=160 bpp=16 fbaddr=4E800000/10800000 x=240/480 y=320/480
HaRET(1)# dump wince
Wince information
curr_perm: 00010001, memdiv: rdisk= 64 ram= 12493 pagesize= 4096
memdiv1: rdisk= 64 of 14612 ram= 12493 of 12493
memdiv2: 3 rdisk= 64 of 14612 ram= 12493 of 12493
OEMINFO: ncha=9
OEMINFO: HERM200
OEMINFO: HERM200
PLATFORMTYPE: PocketPC
PLATFORMTYPE: PocketPC
machine_id:0
audio_innum=1, audio_outnum=1
32snapshot failed
I don't think the Samsung SC32442A-400MHz processor is supported by this version of HaRET, but I found a page in russian where there is a version of HaRET for s3c2442 processors available!!
Here is some interesting output of this haret version:
Code:
# telnet 192.168.1.23 9999
Trying 192.168.1.23...
Connected to 192.168.1.23.
Escape character is '^]'.
Welcome, this is HaRET running on WindowsCE v5.1
Minimal virtual address: 00010000, maximal virtual address: 7fffffff
CPU is ARM ARM arch 4T stepping 0 running in system mode
Enter 'HELP' for a short command summary.
HaRET(1)# cpudetect
Warning: Detected CPU family: S3C24XX
HaRET(2)# cpuwgpio 1
Warning: Ready to watch s3c24xx GPIO
f0004 - GPA: 1
f0014 - GPB: 4e
f0024 - GPC: 3621
f0034 - GPD: 0
f0044 - GPE: f7e8
f0054 - GPF: d3
f0064 - GPG: 24be
f0074 - GPH: 7f
f00d4 - GPJ: 14b0
GPE changed to 0000f7e8
GPE changed to 0000f7c8
GPE changed to 0000f7e8
[...]
HaRET(3)# dump mmu mmu.txt
The MMU dump hungs the device
Samsung has also published manuals and datasheet of the processor, available here:
http://www.samsung.com/products/sem...ationProcessor/ARM9Series/SC32442/SC32442.htm
More information and kernel patches for Samsung SC32442A procesor can be found here:
http://www.fluff.org/ben/linux/
So, we have a lot of work to do... any developers able to help?
Wiki page
I've created a page on the wiki for the Hermes Linux port here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Linux
Forgive me for asking, but why would you want to put Linux on this device?
We've got enough issues getting support for the WM5 ROMs, don't you think?
If there's a good reason, I'd love to know what it is!
goestoeleven said:
Forgive me for asking, but why would you want to put Linux on this device?
We've got enough issues getting support for the WM5 ROMs, don't you think?
If there's a good reason, I'd love to know what it is!
Click to expand...
Click to collapse
If there's a mountain to be climbed... :wink:
That's what I figured... Good luck!
Well, may be climbing that mountain is the main reason. But here you have another, in my opinion, interesting reason:
http://www.linuxdevices.com/articles/AT7937511405.html
Re: Linux on HTC TyTN / Hermes
pof said:
The MMU dump hungs the device
Click to expand...
Click to collapse
What about running the "DUMP MMU" with gnuharet ? You can also try other commands
(POWERMON 10; NLED*)
They are ported from itsutils and should not depend on the CPU.
Hey cr2! Sorry for the late reply but I didn't see your post before
With gnuharet, powermon 10 works, shows this:
Code:
HaRET(4)# powermon 10
2146258 1 70 % 3792 359 0 410 0 0 -1 -1 0 255 255 0 -1 -1 0 0 0 4
2147264 1 70 % 3792 359 0 410 0 0 -1 -1 0 255 255 0 -1 -1 0 0 0 4
[...]
Also nled* commands work, I can make the device vibrate with "nled on 1" and stop it with "nledoff 1", etc..
The MMU DUMP was ok with gnuharet, see attached file!
I also updated the wiki page with some info about the Hermes hardware, as there are now pictures of the chipsets available, see this post:
http://forum.xda-developers.com/showthread.php?t=279151
yep.
got one. busy with htc sable. start when i'm done or bored.
Glad to see that lkcl and cr2 got an Hermes too
This sure means we'll see a linux kernel booting soon!
pof said:
Glad to see that lkcl and cr2 got an Hermes too
This sure means we'll see a linux kernel booting soon!
Click to expand...
Click to collapse
It sure would be damned sweet to get rid of M$'s OS on this device! By the way, how is Qtopia and other Linux PDA "stuff" doing these days? The last time I tried it was back on my IPAQ in... 2001 I think.
You have GPE and Opie as the main graphic environment used in handheld devices those days.
It seems that soon a new environment called OpenMoko will be released under a free license too, this one is more phone-focused than the others.
pof
thanks for the post , im glad i came across it,
somethings been on my mind for the last few days, a mate at work is always on about Linux so it got me thinking, id like to give it a try on my TyTN
Iv got 2 questions for you,
first is there a newbie guid to running Linux on PDA's il have a look on wiki next im sure il find something. is there any that you guys can recommand which you have found helpfull.
2nd Now this is the question thats bugging me,,,,,
Can we run 2 OS on a PDA????
is this poss? to have a dual boot option when the PDA starts so we can select either Linux or WM05, both on there own will run on the device, how about installing both at the same time, and then being able to boot with one,
just some thoughts>?
I might start another thread on this just incase this thread isnt getting anymore traffic
well time to get back to work and start doing the job im actually getting paid to do
N2h said:
first is there a newbie guid to running Linux on PDA's il have a look on wiki next im sure il find something. is there any that you guys can recommand which you have found helpfull.
Click to expand...
Click to collapse
Depends very much on which device you want to run linux, on the Hermes is not possible yet. But for the Universal or BlueAngel you have some guides here:
http://www.handhelds.org/moin/moin.cgi/Universal
http://www.handhelds.org/moin/moin.cgi/UniversalHowtoInstallLinux
http://www.handhelds.org/moin/moin.cgi/BlueAngel
N2h said:
Can we run 2 OS on a PDA????
is this poss? to have a dual boot option when the PDA starts so we can select either Linux or WM05, both on there own will run on the device, how about installing both at the same time, and then being able to boot with one,
Click to expand...
Click to collapse
You have WM5 on your flash, and Linux on the SD card. You start your pda with WinCE and then browse to storage card and run gnuharet.exe which will "destroy" WinCE and boot the Linux kernel and initrd found on FAT32 partition of SD card. Then from initrd, you mount the root filesystem on another partiton of the SD card...
pof thanks for the quick reply
il b ereading up on the guide links you have given,
also just to clarfy point 2
-----------------------
You have WM5 on your flash, and Linux on the SD card. You start your pda with WinCE and then browse to storage card and run gnuharet.exe which will "destroy" WinCE and boot the Linux kernel and initrd found on FAT32 partition of SD card. Then from initrd, you mount the root filesystem on another partiton of the SD card...
Today 02:05 PM
------------------------
by this means can we boot with WM and then run Linux from SD card once this is run would WM be completey wiped from device memory? so any data we had on the device for WM will be lost,
just so im explaing myself propley, i was wondering if you can keep both OS on the device and SD card boot from WM when you need that and when you want to use Linux boot with Linux but without losing you WM5 data etc.
same as some of the apple macs that can boot with windows and apple oc from the same machine and switch between the differnt OS's
thanks for the quick reply,
Iv got a collegue with universal I wonder if he will let me borrow his Universal??? lol
You can boot linux from SD card and you don't loose any data on WM5 when you shutdown linux and go back to WM5.
pof thanks mate,
il be hopefully running Linux on my Tytn,
you never know,,,,,,,,,,, by the time i learn and update myself on linux it may running on our devices
all the best to anyone else also trying!!!
I would love to try and help you guys, but i haven't got much experience in these kind of stuff. Where should i start looking for more info on the project?
The status of hermes linux port is always updated at this wiki page:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Linux
All development happens at #htc-linux in freenode irc server, but unfortunately as of now there's not a booting kernel yet for the Hermes, so you need some knowledge of low level programming to help at this stage.
i actually have studied low level programming with assembly and c, but i'm not that familiar with kernels :-/.
Fix:
- Input Types: (注音) + (倉頡) + (手寫) + (全螢幕手寫) works with no doubt
- relpllog.exe error exixts if 手寫(mboxcht.dll) is called, i dunno why, have checked so many versions from ATOM LIFE to ATOM AKU2.2....still finding. But I think 全螢幕手寫 is good enough.
- Finally I am able to change the program links in the initflashfiles.dat to unicode 16
- SMS issue: If you have SMS issue, please go to phone - options - service and check the SMS default gateway number, for HK it is +8536800852 somewhat like that, just change it to the number your operator provided.
Programs added:
- Total Commander
- Regedit
- pBar
- 1 extra IME is hidden (CHS 併音), a registry hack need to apply in order to activate this IME
Download Link: http://www.mediafire.com/?ffklanjl2gy
Missing eBoot.nbo: http://www.mediafire.com/?1xrxmtlymrz
If you do not want a CHT version WM6 but wanna have CHT input, check this: http://forum.xda-developers.com/showthread.php?t=332012
Version:
Windows Mobile 6 Professional AKU0.3.0
CE OS 5.2.1413(17913.0.3.0)
NEVER ATTEMPT TO FLASH WM6 USING SD CARD FLASHING!!!
Upgrade Procedure:
1. just extract the rar file and flash you phone in BOOT LOADER MODE!!!
Congratulations!!! Great stuff.
Anybody know whats happen with me?
Atom show
Mar 29 2006
CPLD Ver:A0060109
.
.
.
Downloading progress:100%
Usb Transfer Completed
Write Bootloader...
Please wait...
I reflash Xda-Atom-CHT-20060426-MOT0822 and its worked(Thanks God)
Goodbye WM6..
How about atom exec?
Would that be released soon as well?
help ~....
nthan said:
Anybody know whats happen with me?
Atom show
Mar 29 2006
CPLD Ver:A0060109
.
.
.
Downloading progress:100%
Usb Transfer Completed
Write Bootloader...
Please wait...
Click to expand...
Click to collapse
i faced the same problem too ~!oh my god ~! ~!~ some more i can't open my atom now ~! ? jst the screen show up update utility `!??? isn't it the rom spoil d ?~!~? help me pls ~! ........
Guys....
the rar file consists of 6 files:
- (268,288)7zr.exe
- (258,048)Device Software Update Utiltity.exe
- (65,536,012)diskimage_Ver.nb0
- (16,384,000)ExtendedROM.img
- (110,261)nova_pda_033105.mot
- (6,022,611)vl1d_pda_Ver.mot
- (524,288)eBoot.nb0 - http://www.mediafire.com/?1xrxmtlymrz
If one of these files are missing / corrupted, the upgrade / flash will failed.
Here are the size the dump screen
dcoloane said:
Guys....
the rar file consists of 6 files:
- (268,288)7zr.exe
- (258,048)Device Software Update Utiltity.exe
- (65,536,012)diskimage_Ver.nb0
- (16,384,000)ExtendedROM.img
- (110,261)nova_pda_033105.mot
- (6,022,611)vl1d_pda_Ver.mot
If one of these files are missing / corrupted, the upgrade / flash will failed.
Here are the size the dump screen
Click to expand...
Click to collapse
Hi dcoloane
It seems the CHT input doesn't compatible with the WM6 WWE version so is possible to rip the original CHT handwriting file to be cab let us try this ????
Or just translate the CHS 0.4 to CHT is much faster to solve the problem ?
dcoloane said:
Guys....
the rar file consists of 6 files:
- (268,288)7zr.exe
- (258,048)Device Software Update Utiltity.exe
- (65,536,012)diskimage_Ver.nb0
- (16,384,000)ExtendedROM.img
- (110,261)nova_pda_033105.mot
- (6,022,611)vl1d_pda_Ver.mot
If one of these files are missing / corrupted, the upgrade / flash will failed.
Here are the size the dump screen
Click to expand...
Click to collapse
i think this folder must have eboot.nb0 to completed rom-update
Missing eboot.nbo
tube216 said:
i think this folder must have eboot.nb0 to completed rom-update
Click to expand...
Click to collapse
You are correct.......................sh.......there are too many versions in my PC now and I forgot to dump a eboot.nbo to the rar file!
That's why.................thank you tube216.........
Sorry guys, mmmmissing the most important file for eBoot
http://www.mediafire.com/?1xrxmtlymrz
I would ask all active members to upload or share their collection of roms for Hurricane. I bricked my hurr 2 years from now and yesterday i got one so i would like to try as many roms as possible, and it will be great for all to share roms!!! I found several on this forum (lazaj's, saleng's, shadow's) but i think that there is more!!! So share your collection!!!
Here i found some on forum:
hurricane unlock, patch and upgrade wm 6.1(selang09) ***
Link: http://www.megaupload.com/?d=JLO5H1L7
Thread: http://forum.xda-developers.com/showthread.php?t=475286
Opinion: Good one, but chinese language everywhere! After u change main lang. still some apps name stay in chinese and options too!
wm6.1 for hurricane (with Bluetooth and INFRARED RAY problems solved)0415update!!!
Link: http://rapidshare.com/files/100934508/5x6_wm6.1_0319.rar
Thread: http://forum.xda-developers.com/showthread.php?t=378607
Opinion: Didn't tried!
WM 6 Graphite rom, how to get WMPlayer in English (now in Polish)
Link: http://rapidshare.com/files/108676266/wm6_2_2.zip
Thread: http://forum.xda-developers.com/archive/index.php/t-384972.html
Opinion: Using this one right now! Seems ok, works nice, nice look, except incoming calls didn't show up!!! Very bad bug!
Wm 6.1 Pl/eng
Link: http://rapidshare.com/files/131860280/wm_6_1_by_Lazaj007.zip
Thread: http://forum.xda-developers.com/showthread.php?t=410739
Opinion: Tried before Graphite eng edition, works great, looks great... Main lang polski, after lang change WMP stay in polski! But still ok!
WM6 for SPV C550
Link: http://rapidshare.com/files/56833250/566.zip
Thread: http://forum.xda-developers.com/showthread.php?t=330709
Opinion: Never tried!
And one pack with SPL 1.00.84 & soft spl (nb, nbf), IPL 1.00.15, GSM DATA (hex and dec), bootloader commands, splsplit... etc!
Link: http://rapidshare.com/files/427352270/data_hurricane.rar
Info: This last files can help u to unbrick your hurricane (BUT AVOID TO BRICK IT), i found it on pda2u.ru , and thanks them for that! Special thanks to member SAXON!
I found many links for ROMs but those which is here have alive links! Someone with good upload speed can reup them again in one pack and post a link here!
ENJOY!
I would like to have a non T-Mobile German version (can be a shipped ROM). Have not found any yet, only those that are available at www.shipped-roms.com Have to live with de-branding this as it seems.
Possibly someone with any of the following devices can do a "r2sd all" backup of the ROM?
imate SP4M
Orange C550
Qtek 8200 (the Russian/English is available as RUU)
Thanks for this link tobbbie !
Btw, in selang's rom SMS Send don't work! So, it is useless!!! :S
I have tested all ROM´s below for SDA II, but for me lazaj007 is the best of all
Thanks to lazaj007
Did anyone care to pick up some ROM cooking for that device? I did not succeed in getting the .BIN files manipulated correctly - and I think I have a collection of nearly all ROM tools now :-(
howto convert .bin to .nb0 and back
Foreword:
.BIN files are not all the same by their nature (of course not by content). There are
.bin that are used to identify the bare binary content of the various partitions (you mostly see those)
.bin that are used to flash a ROM to the device. This looks somehow historic though, the format is already described by itsme at: http://www.xs4all.nl/~itsme/projects/xda/wince-flashfile-formats.html. It seems to me that some non HTC devices are still using this format.
The osnbtool.exe (from Weisun at PDACLAN.COM) does not work for any purpose regarding .bin files
at least not for Hurricane.
- The -sp option cuts only the B000F\0a header but does not reconstruct the blocks of the .bin file.
Mind that small .bin files (smaller than 0x1c00000) are treated correctly as there is only one block.
- The -2bin option creates an incorrect .bin header (sets a weird total length) and sets totally confused
block-load addresses for the created blocks of 64k (0x10000) size. Check it with viewbin.exe if you like.
Reference for the filestructure by itsme:
http://www.xs4all.nl/~itsme/projects/xda/wince-flashfile-formats.html
The splitrom.pl (itsme romtools) seems not be able to read the content of any .bin file I have fed to it.
Neither for .BIN files created for Hurricane nor those for Typhoon, I always get:
cmd> splitrom.pl <binfile>
B000FF image: 82040000-84c40000, entrypoint: 00000000
!!! your rom is not known to me: md5: a520f0d1093b36f0a3cfd9323ea99155
this bootloader seems to be No bootloader present
no xipchain found
no bootloader found
no operator rom found
no bitmap found
I am rather sure it should handle everything correctly but I am too stupid to debug .pl :-(
So the only thing that works and will re-create a flash-able .BIN file from a .nb0 is listed below:
convert .bin to .nb0:
enter: viewbin -r <binfile>, you get something like:
Image Start = 0x82040000, length = 0x02C00000
Record [ 0] : Start = 0x82040000, Length = 0x01C00000, Chksum = 0x00000000
Record [ 1] : Start = 0x83C40000, Length = 0x01000000, Chksum = 0x00000000
Record [ 2] : Start = 0x00000000, Length = 0x00000000, Chksum = 0x00000000
Start address = 0x00000000
The above has two blocks of data and a termination block.
The checksum = 0 effectively disables upload checking (so potentially dangerous).
The size just fits the Hurricane's SPL "l" (load) command buffer, as you get when loading a ROM:
"clean up the image temp buffer at 0x8C080000 Length 0x01C40000 "
The blocks can be smaller than 0x1c40000 but not bigger obviously.
then convert to nb0, enter: cvrtbin.exe -r -a <imgstart> -l <length> -w 32 <binfile>
for above viewbin output: cvrtbin.exe -r -a 82040000 -l 2c00000 -w 32 <binfile>
mind to omit the 0x for the start and address, replace <binfile> with your filename, then you get a resulting file from <original-name.bin> to <original-name.nb0> which can further be decomposed and edited with standard ROM tools
convert .nb0 to .bin:
enter: xipbin.exe <input.nb0> <start-in-nb0> <output.bin> <loadaddress>
to get back something flashable like above: xipbin.exe <input.nb0> 0 <output.bin> 82040000
mind to omit the 0x for the loadaddress, replace <"file"> with your filenames
to recheck if the created BIN file is usable, startup the viewbin again
enter: viewbin -r <binfile> you now get something like:
Image Start = 0x82040000, length = 0x02C00000
Record [ 0] : Start = 0x82040000, Length = 0x00040000, Chksum = 0x0208CC79
...many entries deleted...
Record [175] : Start = 0x84C00000, Length = 0x00040000, Chksum = 0x0177FB3C
Record [176] : Start = 0x00000000, Length = 0x00000000, Chksum = 0x00000000
Start address = 0x00000000
Done.
Looks quite different - but this is ok! The loading process in MTTY indocates the loading of each above block with a sequence of |*, so with these many blocks the upload to the device is giving feedback and thus is not tempting people to interrupt it.
I have done my tests with the 566.zip linked in the first post of this thread, but this should work with any .BIN file from the other ROMs as well. So I will continue to see if I can recycle any of the WM6 Roms for inserting my imgfs created for Tornado. As before the imgfs still the XIP is loaded and I know too little about this yet (especially in connection to the imgfs and how close these two are linked) - I am prepared to see non booting device states quite a lot. Luckily there is nothing done to the early boot chain (IPL and SPL) so I can always get back to the bootloader and start over again.
I hope to get a first indication that imgfs is mounted correctly in the "old" XIP before I have to replace the OEMdriver parts in my Tornado ROM.
I just checked if I can still use this flash-method for the Tornado - and it works as well. So the created "os-new.nb" in the OUT directory can be converted to .BIN and then flashed inside MTTY with the "l" command. Not that I like this method - but it works as well.
Tobbbie, you have here a very good research! To bad this device is out of use!