ok right now i'm running the love rom on my g4 wizard. how do i reflash my original cingular rom? i know, it sounds like a nub question but here is the problem. it will flash then hang at 80% and the progress bar will turn red. it will then pick up again and continue to 95% then turn red, fail and say error 326 invalid command. i downloaded the updater directly from htc.
any ideas guys?
Yeah it doesnt work....Your now stuck with the Wizard Love Rom or you can upgrade to another rom but you cant go back to the original Cingular Rom.
internetadam4657 said:
ok right now i'm running the love rom on my g4 wizard. how do i reflash my original cingular rom? i know, it sounds like a nub question but here is the problem. it will flash then hang at 80% and the progress bar will turn red. it will then pick up again and continue to 95% then turn red, fail and say error 326 invalid command. i downloaded the updater directly from htc.
any ideas guys?
Click to expand...
Click to collapse
internetadam4657 said:
ok right now i'm running the love rom on my g4 wizard. how do i reflash my original cingular rom? i know, it sounds like a nub question but here is the problem. it will flash then hang at 80% and the progress bar will turn red. it will then pick up again and continue to 95% then turn red, fail and say error 326 invalid command. i downloaded the updater directly from htc.
any ideas guys?
Click to expand...
Click to collapse
That ROM is for a G3 Wizard, Check your PM's
ok i reflashed with your method and i'm back to my cingular rom. thanks a lot!
(big reason to go back was it was the only rom that my school's wifi app would work with, plus the love rom in combo with orwells wm6 wasn't cool. that splash was ugly IMO)
internetadam4657 said:
ok i reflashed with your method and i'm back to my cingular rom. thanks a lot!
(big reason to go back was it was the only rom that my school's wifi app would work with, plus the love rom in combo with orwells wm6 wasn't cool. that splash was ugly IMO)
Click to expand...
Click to collapse
If you were talkin' to me...glad I could help...one question though...
did your ext Rom install on its own?
no, i still had a blank ext rom as i had to setup all my internet settings, etc again. how can i fix that one?
internetadam4657 said:
no, i still had a blank ext rom as i had to setup all my internet settings, etc again. how can i fix that one?
Click to expand...
Click to collapse
All you have to do is download and install the Ext Rom cabs manually. This may still be available on the ftp. If not PM me.
It worked for me
Thanks a lot ercave1, the ROM flashed flawlessly, however the EXT ROM didn´t came up by itself. The features I´m missing are as follows:
1.- USB switch to select activesync mode to serial or RNDIS is missing, regardless this USB sync to PC (Activesync 4.5) is alive and working well.
2.- ClearVue pdf is missing, not a big loss and I really don´t care since there´s another alternatives to read and diisplay pdf documents.
3.- GetGood and in general all connection settings! I don´t give a s**t!!
4.- MIDlet Manager, big loss... I´m going to keep trying to download Risidoro_Intent_MIDlet_ Manager_V11 whenever the ftp be up and running again. So no worries.
5.- Voice Speed Dialing Settings icon in both the Program ans Setting screens are missing, however the software is running when I press the known VSD button.
6.- Cingular carrierlogo! I don´t care I have my own logo.
And I guess that´s it !
Regardless the comments above, I´d like to learn how to "extract" the correspondent EXT ROM cab files, if you guys have and advice on it would be great.
Thanks again ercave1 for the big help
internetadam4657 said:
no, i still had a blank ext rom as i had to setup all my internet settings, etc again. how can i fix that one?
Click to expand...
Click to collapse
luiggi said:
Thanks a lot ercave1, the ROM flashed flawlessly, however the EXT ROM didn´t came up by itself. The features I´m missing are as follows:
1.- USB switch to select activesync mode to serial or RNDIS is missing, regardless this USB sync to PC (Activesync 4.5) is alive and working well.
2.- ClearVue pdf is missing, not a big loss and I really don´t care since there´s another alternatives to read and diisplay pdf documents.
3.- GetGood and in general all connection settings! I don´t give a s**t!!
4.- MIDlet Manager, big loss... I´m going to keep trying to download Risidoro_Intent_MIDlet_ Manager_V11 whenever the ftp be up and running again. So no worries.
5.- Voice Speed Dialing Settings icon in both the Program ans Setting screens are missing, however the software is running when I press the known VSD button.
6.- Cingular carrierlogo! I don´t care I have my own logo.
And I guess that´s it !
Regardless the comments above, I´d like to learn how to "extract" the correspondent EXT ROM cab files, if you guys have and advice on it would be great.
Thanks again ercave1 for the big help
Click to expand...
Click to collapse
Yes, this is because the Ext Rom was wiped out by the G3 Rom having been flashed on your G4 devices. I don't remember reading about a fix for this, but you may want to search through the forum. The only solution I'm aware of is to install the Ext Rom manually.
I'm glad you guys got the device running again.
Regards,
ercave1
luiggi said:
Regardless the comments above, I´d like to learn how to "extract" the correspondent EXT ROM cab files, if you guys have and advice on it would be great.
Click to expand...
Click to collapse
What do you mean with 'extract'?
1-From the RUU exe file?
2-From nk.nba?
3-Phone disk dump?
4-WinCE disk reading?
Reflashing ExtROM CID Locked
Who knows Russian go to http://4pda.ru/forum/index.php?showtopic=32996 & read my post
And the one who does not know it?
thanks to: Murchelago
literal from the Russian to English
it is the first step. if someone can polish it (I do not speak English good).....
_________________________________________________________________________________________
Already many know that mun built Shell Of tool, which was capable of pouring axis into Wizard G4 with [lochennym] [Sidom], but to the enormous regret it does not know how to pour with [ekstrom].
Recently it decided to be played a little with the program of nb2nbf and to verify, is it possible by nevertheless any means to renew also Extended Of rom to CID-Locked apparatuses. And which there was my happiness, when I revealed after [pereproshivki] that he renewed.
It decided by the same method to try to flood Splash Of screen and HTC Of logo - everything proved to be very simply.
In view of the small quantity of information on the forum on [devaysu] Of wizard G4, it decided to build brief instruction on its [pereproshivke].
1. We stitch through apparatus by pure piercing - Wizard_Love_2.26.10.2_WWE_Novii+CF2.
http://rapidshare.com/files/8651097/Wizard...E_Novii_CF2.rar
2. By the program of typho5 we unpack nbf the file of piercing, which we desire to pour into the beast.
First we fill up into the folder with the program of nbf, and then start with the parameter of typho5.exe - x nk.nbf. After procedure we obtain several files, in number of which is contained OS itself, Extended Of rom, and also as a rule Splash Of screen and HTC Of logo.
([ZY]. For convenience in the use of program made [batnik]. Simply you will place nbf into the folder and will neglect typho.bat)
3. Now we gather our nbf file, each at will can include any desired components in it, naturally, except axis itself.
4. We go in very [progu] of nb2nbf and we make the following tuning:
- We establish Model ID: WIZARD
Language: it is empty
OEM: it is empty
Operator of version: it is empty
CID: it is empty ([ochen]_[vazhno]); remove the numbers, which are contained inside the field
- We establish [galochku] opposite “File of # 1”, we click on the button of survey (button with three points), we find the file Of extended Of rom' and (in the folder of typho5, the exemplary name of 9b000000-Extension.nb)
- In the field “Of start Of address” we enter 9b00000
- In the field “Of image Of name” we enter Extension Of rom (not Extended Of rom, you be attentive!!!)
- In the point “Of file of # 2” we find Splash Of screen, in the field of address we enter 92000000, in the field “of image of name” we write Splash Of screen.
- In the point “Of file of # 3” we find HTC Of logo, in the field of address we write 9d000000, in the field “of image of name” we write WITH HTC Of logo.
- We press button “Translate”
- Extended ROM is ready, it is possible to stitch through.
Unnecessary for you files it is possible simply not to include, but to insert, for example, only one by [ekstrom].
5. We place the obtained file of nbf into the folder [proshivalshchikom] and start. Procedure as with the usual piercing, lasts in all the pair of minutes.
6. We pour the axis Of shell Of tool' ohm from mun' of a.
Finale - valuable piercing
Don´t know
mestrini said:
What do you mean with 'extract'?
1-From the RUU exe file?
2-From nk.nba?
3-Phone disk dump?
4-WinCE disk reading?
Click to expand...
Click to collapse
I really don´t know from where and how mestrini, that´s the reason why I quoted the word extract and included the word learn
luiggi said:
I really don´t know from where and how mestrini, that´s the reason why I quoted the word extract and included the word learn
Click to expand...
Click to collapse
I enumerated the options since each have its own reason
1- Use Winrar to open RUU.exe and use typhoonnbfdecode.pl to extract the 10MB file (0xA00000 bytes) of the extended rom from nk.nbf
2- oops, same as 1 (and its nk.nbf- not nk.nba). hehe, my mistake
3- use pdocread.exe to read BDTL1 - or TRUEFFS_DOC1 (use my Wizard Service Tool as it can be done with a few clicks )
4- Unhide extended_rom and use Active Sync to copy the files to PC (or, once again use my tool to do the same )
cheers
Sounds great to me!
mestrini said:
I enumerated the options since each have its own reason
1- Use Winrar to open RUU.exe and use typhoonnbfdecode.pl to extract the 10MB file (0xA00000 bytes) of the extended rom from nk.nbf
2- oops, same as 1 (and its nk.nbf- not nk.nba). hehe, my mistake
3- use pdocread.exe to read BDTL1 - or TRUEFFS_DOC1 (use my Wizard Service Tool as it can be done with a few clicks )
4- Unhide extended_rom and use Active Sync to copy the files to PC (or, once again use my tool to do the same )
cheers
Click to expand...
Click to collapse
Thanks a lot mestrini, I appreciate your input and I´ll give it a try right away!
Related
hi,
can anyone still running the original japanese rom on x01ht share the manner mode executable with me? i don't recall the exact name of that file but i think it was like manner_mode.exe you can find in windows directory.
i had it backed up when i made the rom switch to tytn but i somehow lost it. appreciate it if you could reply to this with that file attached.
thanks in advance...
can anybody help?
Is that the program that activates manner mode by press and holding the comm manager button?
Sorry I don't have it either, I flashed English and would love this functionality back too.
tle,
yup, that's what I'm asking for. i think it will benefit everyone if someone can upload it here.
Isn't it on x01ht ExtROM? If it's not you can probably extract it from the dumped rom.
pof said:
Isn't it on x01ht ExtROM? If it's not you can probably extract it from the dumped rom.
Click to expand...
Click to collapse
It's definitely not on the extrom... I've converted a half dozen X01HTs from Japanese to English, and not been able to restore that function. Thanks for the links to the dumped ROM; that should help me get some of the softbank special stuff back...
- awh
hi guys,
it's not on the extrom. it's in the windows directory for sure. i once copied it on my storage card but i lost it when i screwed it by reading that micro sd card with my pc.
pof,
i realized that you might be right saying that it's on the extrom. i recall that it was not a rom file and it was a file copied into the windows directory. i think that means it was installed by one of the sb cab files on the extrom. the only cab file i did not execute was PT_SIMlock_Empty.cab.
harryk1372 said:
the only cab file i did not execute was PT_SIMlock_Empty.cab.
Click to expand...
Click to collapse
I think it's not on this one, this just adds the "annoying screen" for simlock protection by software. If you install this then you need to install SB_USIM.cab to remove the annoying screen.
pof said:
I think it's not on this one, this just adds the "annoying screen" for simlock protection by software. If you install this then you need to install SB_USIM.cab to remove the annoying screen.
Click to expand...
Click to collapse
I agree - I still have the unnerving feeling that some of the content in the extrom actually points to executables somewhere in the ROM. Bad band-aid type code, but what would you expect..? I think I saw similar on the i-mate extrom where it tried to execute parts of the standrard rom after a cold reset..
pof said:
I think it's not on this one, this just adds the "annoying screen" for simlock protection by software. If you install this then you need to install SB_USIM.cab to remove the annoying screen.
Click to expand...
Click to collapse
I know pof... that's why i didn't run it.
Is it this??
Dear all members
I saw some bbs mentioned as follow
'there is a file that was conianted in X01HT WINDOWS folder
TrayIcon_MannerMode.exe'
But I'm not sure is it correct?
Manner mode is called in oversea 'silent-mode' or 'flight-mode'
I've flashed my X01HT to Dopod rom so that I can not try it.
anyway let's you try it.
BR,
krnnidtt,
i don't exactly remember the file name but i think the one you saw is the one i am looking for. it's not the "flight-mode" that turns the radio off but it is the same as the "silent-mode" and turns the vibrator on.
you can turn on the vibrator by opening the comm manager and tap on the vibrator icon, but this small exe file i am looking for does the same by just press and holding the comm manager button. when that is on, an icon sits in the tray. not a big deal but it's convenient.
i'll check the dumped rom pof advised.
Now that I understand what "manner mode" is, this might be useful for you too:
http://forum.xda-developers.com/showpost.php?p=1019893&postcount=1
hi pof,
thanks a lot for that. it works great and this is what i wanted. i should have searched more to find this thread myself in the first place. now i will find a way to assign this to press and hold state of the comm manager button (button 3).
ok, the current KITL tutorial is horribly crap since it takes you bloody ages before you can do anything; here's what you *actually* need to do:
Download Platform builder, Emulator and ARMV4i are probably not necessary... can't guarantee that, but you can rerun the installer anyway and just get those to add on.
run Platform builder, start a new platform, select custom, leave everything blank, that's fine.
now, for the juicy part;
firstly take a random dll, hell take ANY file and copy it 4 times as ril.dll rilgsm.dll serial_cmd.dll and stk_service.dll (the stk_service.dll might not actually be necessary either) also, create a blank text file here and rename it to nk.bin
now, go to Target --> Connectivity Options. set the Download to None, the Transport to USB and the Debugger to None, go ahead and click Apply, then click Close.
go to Build OS --> Open Release Directory; note down the folder path and go to it in explorer and copy the 4 files from earlier there.
Go back to Platform Builder and go to Target --> Release Directory Modules, in there you'll be able to add the 4 dll files to the release, once all are added, click OK.
now for your Hermes: hold the Power + Comm buttons and soft reset and wait for the KITL dialog to appear, now is the CRITICALLY missed step; you need to press the small OK button on the LEFT of the device to activate USB KITL.
once activated, go to Target --> Attach Device and just wait for the device to load, it won't take very long.
once loaded, you can use the device normally EXCEPT for disconnecting the USB... that'll lock the device up, so the best thing to do is of course lob SSPL on to it via an SD card and you're away.
Wonder what PB is actually doing to the phone to get access to it without the OS. Could we not create a program that basically does whatever PB does, but all automatically and once SSPL is loaded, push your HardSPL on it?
Oli, I think it goes without saying you are just too darned smart!!! Keep up the great work!
LegolasTheElf said:
Wonder what PB is actually doing to the phone to get access to it without the OS. Could we not create a program that basically does whatever PB does, but all automatically and once SSPL is loaded, push your HardSPL on it?
Click to expand...
Click to collapse
KITL is the Kernel Transport layer, what PB does is firstly communicate via this layer to try and push a null kernel image to the device (in our case) which fails, resulting in the normal kernel booting instead.
the second stage is that 3 null files (or at least not signed) are pushed to the phone intended to be used instead of the radio interface dll's... since of course, the radio isn't actually working and is hence crashing the OS, as a result, these Dll's never get executed, meaning the phone no longer crashes.
the reason this used to be so horribly slow was due to the ridiculous emulator image getting pointlessly pushed to the phone.
Is this one of those things that it's just not worth duplicating PB? Or, can we also push a null image to the device in a faster/easier way that also does the same thing, but, without needing windows and/or PB?
LegolasTheElf said:
Is this one
of those things that it's just not worth duplicating PB? Or, can we also push a null image to the device in a faster/easier way that also does the same thing, but, without needing windows and/or PB?
Click to expand...
Click to collapse
well, sniff the USB port and see for yourself
Thanks!!!
Olipro said:
ok, the current KITL tutorial is horribly crap since it takes you bloody ages before you can do anything; here's what you *actually* need to do:
Download Platform builder, Emulator and ARMV4i are probably not necessary... can't guarantee that, but you can rerun the installer anyway and just get those to add on.
run Platform builder, start a new platform, select custom, leave everything blank, that's fine.
now, for the juicy part;
firstly take a random dll, hell take ANY file and copy it 4 times as ril.dll rilgsm.dll serial_cmd.dll and stk_service.dll (the stk_service.dll might not actually be necessary either) also, create a blank text file here and rename it to nk.bin
now, go to Target --> Connectivity Options. set the Download to None, the Transport to USB and the Debugger to None, go ahead and click Apply, then click Close.
go to Build OS --> Open Release Directory; note down the folder path and go to it in explorer and copy the 4 files from earlier there.
Go back to Platform Builder and go to Target --> Release Directory Modules, in there you'll be able to add the 4 dll files to the release, once all are added, click OK.
now for your Hermes: hold the Power + Comm buttons and soft reset and wait for the KITL dialog to appear, now is the CRITICALLY missed step; you need to press the small OK button on the LEFT of the device to activate USB KITL.
once activated, go to Target --> Attach Device and just wait for the device to load, it won't take very long.
once loaded, you can use the device normally EXCEPT for disconnecting the USB... that'll lock the device up, so the best thing to do is of course lob SSPL on to it via an SD card and you're away.
Click to expand...
Click to collapse
Olipro thank you very much for this very nice explanation.
Worked perfectly . Maybe change in your tutorial copy 5 filess ( u wrote 4 files only the dlls ) to the release folder.
Another Time: THANK YOU VERY MUCH!
Best regards.
A nub
AdoMad
ActiveSyncen
Hello,
I have just a dump question:
After recovering my HTC Hermes and installing, which is now already deinstalled:
It is not synchronizing anymore with my hermes.
It is connected to my hermes and the activesync sign is making rounds, but nothing its happening.
I can access the SD card from Activesync but synchronization is not working.
I deinstalled activesync and installed it as well as I deinstalled the windows CE stuff.
Whats happened?
Thanks for help in advance!
adomad said:
Hello,
I have just a dump question:
After recovering my HTC Hermes and installing, which is now already deinstalled:
It is not synchronizing anymore with my hermes.
It is connected to my hermes and the activesync sign is making rounds, but nothing its happening.
I can access the SD card from Activesync but synchronization is not working.
I deinstalled activesync and installed it as well as I deinstalled the windows CE stuff.
Whats happened?
Thanks for help in advance!
Click to expand...
Click to collapse
not a bloody clue... play with it, I don't know
weired....
it does not work so far...
I tried different things, but no success!
Thanks anyways.
AdoMad
Thanks Oli..it works..I confirm
hdubli said:
Thanks Oli..it works..I confirm
Click to expand...
Click to collapse
O RLY?
I know it works mate... but thanks for pointing it out
Fantastic
Thank You Oli.
I had a 8525 brick for 2 weeks. I tried the superdave method many times without success. This method worked the first time. 30 minutes later I have a fully working phone again!
Great walk through Oli - if I get to that stage I know where to come but with Hard-SPL and the RUU Wrapper hopefully it shouldn't come to that
Olipro said:
ok, the current KITL tutorial is horribly crap since it takes you bloody ages before you can do anything; here's what you *actually* need to do:
Download Platform builder, Emulator and ARMV4i are probably not necessary... can't guarantee that, but you can rerun the installer anyway and just get those to add on.
run Platform builder, start a new platform, select custom, leave everything blank, that's fine.
now, for the juicy part;
firstly take a random dll, hell take ANY file and copy it 4 times as ril.dll rilgsm.dll serial_cmd.dll and stk_service.dll (the stk_service.dll might not actually be necessary either) also, create a blank text file here and rename it to nk.bin
now, go to Target --> Connectivity Options. set the Download to None, the Transport to USB and the Debugger to None, go ahead and click Apply, then click Close.
go to Build OS --> Open Release Directory; note down the folder path and go to it in explorer and copy the 4 files from earlier there.
Go back to Platform Builder and go to Target --> Release Directory Modules, in there you'll be able to add the 4 dll files to the release, once all are added, click OK.
now for your Hermes: hold the Power + Comm buttons and soft reset and wait for the KITL dialog to appear, now is the CRITICALLY missed step; you need to press the small OK button on the LEFT of the device to activate USB KITL.
once activated, go to Target --> Attach Device and just wait for the device to load, it won't take very long.
once loaded, you can use the device normally EXCEPT for disconnecting the USB... that'll lock the device up, so the best thing to do is of course lob SSPL on to it via an SD card and you're away.
Click to expand...
Click to collapse
Hi Olipro, Could you share or attached your mention below 4 fils us:
ril.dll
rilgsm.dll
serial_cmd.dll
and stk_service.dll
For us download.
Thanks a lot
mmgirlmm said:
Hi Olipro, Could you share or attached your mention below 4 fils us:
ril.dll
rilgsm.dll
serial_cmd.dll
and stk_service.dll
For us download.
Thanks a lot
Click to expand...
Click to collapse
Hey mmgirlmm, it's post like these that will give Olipro a Myocardial Infarction or better known as a Heart Attack. He's on the edge as it is and I really don't want to push him over! Most people here know he's done a lot of good for this community and inane posts like these will take him from us for good!
I realise that English may not be a strong point but Olipro could not have made it much clearer.... use ANY file. If you do not know what one of those is or can not find one on your phone then leave it be!
@Olipro
St John's Wort is good to calm the nerves & ease depression, or find out what Pof takes.
Wam7 said:
Hey mmgirlmm, it's post like these that will give Olipro a Myocardial Infarction or better known as a Heart Attack. He's on the edge as it is and I really don't won't to push him over! Most people here know he's done a lot of good for this community and inane posts like these will take him from us for good!
I realise that English may not be a strong point but Olipro could not have made it much clearer.... use ANY .dll. If you do not know what one of those is or can not find one on your phone then leave it be!
@Olipro
St John's Wort is good to calm the nerves & ease depression, or find out what Pof takes.
Click to expand...
Click to collapse
HI Warm, u r a good man, thanks a lot your post.
I think many ppl here who already brick their hermes, at this situation that is cannot copy the dill from the their hermes ppc. That Y i have this request from Olipro if he possible to share or attached file to here.
u r a good man, could u share or upload these ANY dll file to here to share for ppl who need in this form.
Thanks
Telling me I am a good man will not get me to post the files. I have not had reason to use Platform Builder but just from reading the Oli's post I think he means any .dll on your computer not phone as I alluded to.
Somebody will come along to make it totally clear for those poeple whose English might not be very good.
Check your PC firewall settings
adomad said:
weired....
it does not work so far...
I tried different things, but no success!
Thanks anyways.
AdoMad
Click to expand...
Click to collapse
Adomad, depending on what firewall program you have, you may need to wander through it's settings to check whether it has exclusions to allow your reinstalled version of ActiveSync to access the necessary ports to sync.
mmgirlmm said:
HI Warm, u r a good man, thanks a lot your post.
I think many ppl here who already brick their hermes, at this situation that is cannot copy the dill from the their hermes ppc. That Y i have this request from Olipro if he possible to share or attached file to here.
u r a good man, could u share or upload these ANY dll file to here to share for ppl who need in this form.
Thanks
Click to expand...
Click to collapse
Wam7 has tried to explain this... yet clearly you're failing to listen.
INVENT A FILE, THEY DO NOT HAVE TO BE REAL.
you could take a text file like mypasswords.txt and rename it to ril.dll then copy it 3 times and rename those... it doesn't make a blind bit of difference, do you get it now?
Simple steps on howto
1. download the kitchen Download
2. download Prophet Touch X rom Get it here
3. extract Kitchen and Prophet Touch X to separate folder
4. Place the OS.nb from Prophet Touch X in the rom folder of the Kitchen
5. run Buildos.exe and choose what to include (the marked apps are the once that are in Prophet Touch X) press the green play button and wait for it to finish
6. run CreateROM.bat (if there is any error the you have included to much in the Buldos prosess)
7. if there were no error the new OS.nb is in the temp folder move it to the Prophet Touch X folder and overwrite the os.nb in it
8. flash any step 1 WM5
9. now Flash your new rom within Prophet Touch X folder
if everything is done right you should have your new coocked rom on your Prophet
I have put all the things that should not be removed into the SYS folder so do only make changes to the OEM folder till you know more about cooking .
replace the HTC Audio Manager with this one
View attachment OEMAudioManager.zip
New HTC Album with folder option
View attachment HTCAlbumFolderOption.zip
Extras and links
I'll upload some addons for the kitchen later on as I've made more OEM packs
You can also search for oempacks to include but be aware that some OEM packs are device depented
Some cool tools that I use but have not included in kitchen You'll need to understand what they do before using them
HyperCore Kitchen cool for dumping roms and building ( I use it for dumping)
this is great.. awesome.
Great job Gullum. Now guys, we all should start frying Hokienmee or Char Kueh Teow (both chinese cuisine)
geney said:
Great job Gullum. Now guys, we all should start frying Hokienmee or Char Kueh Teow (both chinese cuisine)
Click to expand...
Click to collapse
I like both of them..LOL..
Really love this kitchen...
Thanks man, you are great!!!
It'll be even better if have a list of what those things really for. I do not know which box to check and which one is not
Maybe I'm too new for 'cooking'
geney said:
It'll be even better if have a list of what those things really for. I do not know which box to check and which one is not
Maybe I'm too new for 'cooking'
Click to expand...
Click to collapse
hold the mouse over one of the options and there should show and explaination for most of the items
good news
i'll try it
for every change in X and flashing it, is it always necessary to do step 1 again (wm5 flashing) ?
When I do hard reset and at the "tap screen to go on" point, I could start flashing X too ?
What I mean, is the complete rom exchanged when I flash X, or do some parts from wm5 or old X (IX, VIII ....) remain ?
I've try to cook today.. BUt seems something is going wrong...
Better I flashed it back to the original touch X ROM...
I also had some bad luck with cooking.
I did everything gullum said, flashed 'new' TouchX, did hard reset and then when its time to see welcome screen and 'press any key.....' there is blank white screen! Nothing happens no matter which button i press! Any ideas?
mcupurdija said:
I also had some bad luck with cooking.
I did everything gullum said, flashed 'new' TouchX, did hard reset and then when its time to see welcome screen and 'press any key.....' there is blank white screen! Nothing happens no matter which button i press! Any ideas?
Click to expand...
Click to collapse
I did the same think.
At my case, i have enter today screen.. But I think, its programs don't install clearly.. (hard reset don't help either.)
The first screen is the same one as you.. The white one.. Maybe you should to try ask Gullum again..
I just flash back to Touch IX with another Ext ROM. QuickMenu in that ext.ROM
thanks gullum
I would like to translate this rom to Portuguese can you give some advices? our some tutorial to do that, please? can i do that with this soft?
best regards
thanks (for this perfect kitchen) gullum ,some 3 questions i have :
1.>how to get oem or make one ,and
2.>how to get .dsm , .rgu files of my favorite software . and
3.>how do i make registry changes prior to build os are they automatic
Note :ext_rom files attributes should be read only since its like that in original rom so i made them read only(i think its healthy for system files any virus won't be able to modify it unless the file needs to be appendable updateable it should be read only),plus i deleted alot of thumbs.db files lying in many folders (about >2mb) just to clean oem folder files off thumbs.db i know winxp might be making them all the way .
i corrected audio manger with this kitchen (its gr8),i can't seem to solve camera album (have solved solution given below )problem ,it seems to have come back you know i can't use gestures , what to do ,any reg setting solution.
Edit : **corrected** the setting in reg hklm\software\htc\htcalbum\cacheserial to 2130706432
and hklm\software\htc\htcalbum\default_viewer to 0
if it still don't get solved set first 11 enteries (h_enable to v_pos) value to 0 in
hklm\software\htc\htcalbum\touchscroll\htcalbumclass
i'll try to provide a cab but this forum has alot of intelligent members
BuildImgfs
whatever I include in the buildos I am facing the same error when I try to create rom; something about BuildImgfs
any help guys!!
ma3ayta said:
whatever I include in the buildos I am facing the same error when I try to create rom; something about BuildImgfs
any help guys!!
Click to expand...
Click to collapse
2 reasons 1.> i hope you are pressing play(top left in build OS)button after whatever you choose,with what ever you want in it.
2.>your file size has to be limited its almost full with this kitchen so you have to remove some item like voice dialing (which i seldom use) or some other item removed before you add some item since size dependency is very important here ,and later run create rom .remember you cannot select everything because of space limitation .
Hello Gullum
I'm trying to do very basic thing adding Windows Live package into the OS.nb but it fails during CreatROM.bat. At BuildImgfs.exe the application BuildImgfs.exe crashes and show the error message and whether to send a report to MS or not (I don't send...).
I just directly add Windows Live to your OS.nb. Is it already fully loaded? Should I remove something before?
question with task manager
something is wrong with task manager.
in control panel ,its setting doesn't work!
Same problem.
Whatever i select in buildOS, BuildImgfs crashes.
Last records is CreateROM.bat window is:
Processing "Painting.gif" as file
Processing "S5K3BAFX.dll" as file
Processing "3aca900a-0834-11dc-8314-0800200c9a66.dsm" as file
Processing "c7dbe475-1d17-4fbf-a63e-af6dc042569a.rgu" as file
Processing "c7dbe475-1d17-4fbf-a63e-af6dc042569a.dsm" as file
Processing "-жE+-A+?.txt" as file
I think reason in strange file name -жE+-A+?.txt.
BINGO!!!
I Found this file in Prophet Touch kitchen.
\\OEM\Quickmenu\-жE+-A+?.txt
Just delete it before kitching.
I allreyd flashed a lot and did use a soft spl, but I do not find a proper
explanation what it is.
So, i Think it is the Bootloader ?
Can anyone tell me what a soft and a hard SPL is and does ?
For what do I need it ?
I just got my new Touch Pro bought in UK and now it is here in Germany and I want a german ROM on it as soon as it is available.
Please don´t write your standard answers like WIKI and Search - a forum is here for communication and I did not find the proper answers - only too long threats
Greetings
Marcus
69reichertm said:
....So, i Think it is the Bootloader ?...
....Can anyone tell me what a soft and a hard SPL is and does ?....
Click to expand...
Click to collapse
Yep your right on that assumption sir The bootloader does alot of the low level handling of the startup process when you power on the device aswell as handling the process when you flash anything to the device...im sure its far more technical than that but thats a starter explanation Essentially you NEED a bootloader for the device to work at all, the case with many of the HTC devices...other devices are different most likely.
Soft SPL: (normally referred to as SSPL) IS loaded into RAM and allows you to perform some of the operations the standard bootloader would do, naturally with some extra functionality (explained later)
HardSPL: Same sort of thing except it is flashed to the device permenantly, so it replaces the HTC bootloader in your devices flash memory.
Both of these tend to safeguard against corrupting the device by having some fancy workarounds and updates to the processes built into the HTC SPL, and the best part is that they allow you to flash ANY ROM you wish therefor allowing us to use Cooked ROMs and various updates like radio updates and etc...frees the device up quite superbly.
69reichertm said:
Please don´t write your standard answers like WIKI and Search - a forum is here for communication and I did not find the proper answers - only too long threads
Click to expand...
Click to collapse
Perhaps some mebers feel like adding a general HardSPL page to the wiki for FAQs like this to be answered better than "Search the forum.." since we know its not that good for finding anything.
The Wiki is there for everyone to use and edit so, learn and pass it on
Just a quick question, does any of this interfere with HTC released updated ROMs? Like, when they release a new version on their site, does having HardSPL prevent you from updating?
Hello !
Thank you for your advise.
One more question:
Should I install Hard or Soft SPL ?
I want to try out many ROMS - I think Hard is better, what do you mean ?
Thank you for your help
By the way:
I am a kind of technican - working in IT for nearly 18 years starting fron Novell, Banyan Vines and DOS up to Windows Vista. Also I am a kind of apple Guru, thats why I have certainly an iPhone 2G and 3G.
For business I use HTC devices sind the first MDA. But I lost track a little sind iPhone.
As I am a technic nerc I sstarted with th the Diamond touch again and I liked the device but i swapped this week to the touch pro because of the keyboard, SD Slot an flash light. I love this device.
By the way I also have the new Samsung Omnia 900 here and an unfun Nokia E71 ( I hate this old symbian - looks like last centuty )
So good night and thank you
Marcus
Jiggs1337 said:
Just a quick question, does any of this interfere with HTC released updated ROMs? Like, when they release a new version on their site, does having HardSPL prevent you from updating?
Click to expand...
Click to collapse
no, raphael hardspl is unsigned, means any rom is allowed, including HTC official roms.
69reichertm said:
One more question:
Should I install Hard or Soft SPL ?
Click to expand...
Click to collapse
you can only install hardspl. the job of soft spl is to install hardspl.
do not ever try any of the following:
- with SSPL, do not flash anything other than the included SPL NBH files. as extra protection the diamond and raphael SSPL's require htchacker sign (except the version jocky edited) and will reject anything that's not an SPL.
- and do not ever try to flash SSPL as an NBH, especially if it is a diamond or raphael.
Im sorry to disagree with your "don't tell me to use the Wiki".
But this is a fairly comprehensive answer to your question: http://wiki.xda-developers.com/index.php?pagename=SPL Questions? straight out the wiki.
Ta
Dave
When flashing a new ROM, do u lose all ur settings? Like installed programs, and other customizations?
Do you lose these by installing Hard-SPL?
Jiggs1337 said:
When flashing a new ROM, do u lose all ur settings? Like installed programs, and other customizations?
Do you lose these by installing Hard-SPL?
Click to expand...
Click to collapse
Yes - Everything Goes.
No.
Ta
Dave
Thanks Dave.
So what do you guys do? Just reinstall everything one by one after you've flashed the new ROM?
Jiggs1337 said:
Thanks Dave.
So what do you guys do? Just reinstall everything one by one after you've flashed the new ROM?
Click to expand...
Click to collapse
There are several things.
UC is short for User Customisation; it is in all the Kaiser ROM's nowadays. l3v5y's Raph ROMs also have it.
Links: l3v5y's ROMs & Main UC Thread.
I use UC to install programs, Provisioning XML (as part of UC) to change registry settings, my xcopyce application to copy folders and active sync to copy contacts, calender etc.
Ta
Dave
Ok, thanks. Seems very complicated. Having to write XML files and such.
when running RaphaelHardSPL-Unsigned_190_1_3.exe, it says all information will be lost on my device. Are you sure i dont lose everything when installing Hard-SPL?
Jiggs1337 said:
Ok, thanks. Seems very complicated. Having to write XML files and such.
when running RaphaelHardSPL-Unsigned_190_1_3.exe, it says all information will be lost on my device. Are you sure i dont lose everything when installing Hard-SPL?
Click to expand...
Click to collapse
I can't say. I haven't done it, what says you will lose all the info, the RUU or the thread? If it's the RUU, then you should be OK, it's probably the standard message that the proper RUU (used for carrier ROM upgrades) has.
UC is good, takes maybe an hour or two to get setup, but once done, you don't have to do it again and it makes flashing so much fun. I started with just installing CAB's and Copying files, then went onto ProvXML for my registry settings next. The latest version of Schap's Advanced Config (3.0) can export tweaks into a Prov XML file for you. It is worth it if you flash your ROM as often as I do.
Dave
I do love this kind of stuff. Any new gadget i get, i like to do this kinda stuff with it. But its a little overwhelming in this case .
So, using UC, i can set it up so that my settings, such as email accounts, wifi networks + passes, notify settings, etc, as well as all the programs are restored after a ROM flash?
To do this i have to manually go through my registry to find the entries for each of these settings though? No way to just extract my current unflashed devices settings to a file that the new ROMs then use? That would be nice
Jiggs1337 said:
I do love this kind of stuff. Any new gadget i get, i like to do this kinda stuff with it. But its a little overwhelming in this case .
So, using UC, i can set it up so that my settings, such as email accounts, wifi networks + passes, notify settings, etc, as well as all the programs are restored after a ROM flash?
To do this i have to manually go through my registry to find the entries for each of these settings though? No way to just extract my current unflashed devices settings to a file that the new ROMs then use? That would be nice
Click to expand...
Click to collapse
We are getting a little off topic of the OP now but...
Any tweaks done with schaps Advanced Config can be easiler exported using a "export" menu option.
If you export your registry after flashing, and again after you have all your settings setup right, you can Diff then using a Diff Program and copy the changes into your ProvXML file. Most PPC Regedit programs can export.
Any more on UC, I'd have a read of the UC thread and ask any questions in there. Myself and l3v5y keep and eye on it most of the time and should be able to help fairly quickly.
Ta
Dave
Hello
So my Threat became quite interesting.
One last question foe me.
What File should I download to HARD SPL my Touch Pro.
Is there a file which includes all ? I mean I do not have to modify files inside the cabinet or so ?
Is there a fast link ?
Thank you for all the help - now lets start using the Touch - weekend is near
69reichertm said:
Hello
So my Threat became quite interesting.
One last question foe me.
What File should I download to HARD SPL my Touch Pro.
Is there a file which includes all ? I mean I do not have to modify files inside the cabinet or so ?
Is there a fast link ?
Click to expand...
Click to collapse
lol, sure, there is only one package, and you simply click the EXE and it goes
http://forum.xda-developers.com/showthread.php?t=410150
Is it possible to use those backup softwares? Like Spb Backup for example that say "ROM Upgrade Mode — now it's possible to restore data after the ROM upgrade"? Instead of UC and such?
there is a IPL initial program loader (sort of bios)
a SPL secondary program loader (kinda like the ntloader)
and there is a service mode (3 color screen) (the flashprog)
then we have a RUU remote unit upgrader
mft masterfile table
mbr master boot record
and some other shizzle
the device switches the output of the internal usb when device is in 3 colorscreen to a service mode which allows it to overwrite the internal flashdrive .. pretty neat as what it actually does is switching to an internal flashprogrammer which programs the internal flashdrive. this is the same process as is used for your pc at home to update the bios.
the CID celloperator identification code (used for blocking certain rom upgrades)
enjoy..
Soft SPL quesiton
I have a SPV M700 and it's unlocked. I want to install Schaps rom. I have the folowing SPL version 1.07.000. I have't managed to install hard spl. Can I use soft spl to flash it? Can I permanently brake it?
Update 2009/04/12
Here is a working cab to enable "Rogers/Fido Call Display" by Captain_Throwback. This cab has been tested and proven to work with many ROMs. I've personally tested it on "Energy" and "RoMEOs" ROMs and it work like a miracle. A big bravo to you, Captain
----------------------------------------------------------------------------
The QUICK/EASY method on Post #14 only work for ELITE RC2 (cab file included)
----------ROMs that work for Raphael----------
NATF's v4
Lantis OS 21009 AKU 1.5.0 v3.00
RRE Canadian 4.1
PROven ROM 1.12
Elite RC3 will include this option
For Da_G ROM and Shipped ROM, you simply have to replace the dll file
----------This is how you do it, for chefs----------
After 33 hours straight non-sleep, and plenty of pm to Da_G and NATF, I can proudly say that we've found the perfect answer for this problem
and finally we can put an end to this question "how to make Rogers/Fido Call display to work?"
I've tested this and believe that this solutions may work for any ROM. So far I've tested with 2 of NATF's ROMs, but I need someone to test
this on Kaiser and other device as well. You don't need to used a Shipped ROM, but you can apply these step to any of your favorite ROM.
2 simple steps in summary:
First you need to cook rilphone.dll file into your ROM in the folder /OEM/OEMDrivers/
Second, you need to change the file that setup all the registry key to your device when you flash
For Fuze (may be different for Kaiser), this is the file: /OEM/OEMDrivers/de3f3189-9f71-4162-9f26-39393dcc8c94.rgu
(I attach the original file from Da_G's clean ROM)You can either just replace this file or simply go in the file and Make
sure that all lines related to these regs are the same as the one I've posted here (took from Da_G's ROM)
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
[HKEY_LOCAL_MACHINE\Software\Microsoft\RIL]
POST #12 includes all registry lines that I've modified
The Files are attached.
----------How to cook rilphone.dll into your favorite ROM, from Da_G's words----------
Code:
[B][COLOR="Indigo"]-=01=-[/COLOR][/B] Download a ROM Kitchen for your device, for Fuze is RaphaelKitchen
[B][COLOR="Indigo"]-=02=-[/COLOR][/B] Extract Kitchen
[B][COLOR="Indigo"]-=03=-[/COLOR][/B] Copy your favorite ROM *.nbh file into \BaseROM\ folder (from extracted Kitchen)
[B][COLOR="Indigo"]-=04=-[/COLOR][/B] Rename your *.nbh file to RUU_Signed.nbh
[B][COLOR="Indigo"]-=05=-[/COLOR][/B] Launch "RaphaelKitchen.CMD" from *Kitchen\ folder
[B][COLOR="Indigo"]-=06=-[/COLOR][/B] choose "e" for extract, then "a" for from BaseROM "RUU_Signed.nbh
(if everything work so far, your dos should be running on it own now)
[B][COLOR="Indigo"]-=07=-[/COLOR][/B] When it's done, check if you have these three main Folders
+/OEM
+/SYS
+/ROM
(make sure they are not empty or only have 1 sub folder. if this is the case,
then your favorite ROM is protected... ask the cook nicely to share with you
those 3 folders)
[B][COLOR="Indigo"]-=08=-[/COLOR][/B] replace these 3 files into /OEM/OEMDrivers/
[URL="http://forum.xda-developers.com/attachment.php?attachmentid=141542&d=1230689478"]+"rilphone.dll[/URL]",
[URL="http://forum.xda-developers.com/attachment.php?attachmentid=141541&d=1230689478"]+"de3f3189-9f71-4162-9f26-39393dcc8c94.rgu"
+"de3f3189-9f71-4162-9f26-39393dcc8c94.dsm"[/URL]
[COLOR="Red"][B][SIZE="2"]It's recommended that you modify the *.rgu file instead of replacing it for a moded ROM,
because of all the tweaks chefs have added.)
For list of registries that I've changed in the *.rgu file, [URL="http://forum.xda-developers.com/showpost.php?p=3106249&postcount=12"]READ POST #12[/URL][/SIZE][/B][/COLOR]
[B][COLOR="Indigo"]-=09=-[/COLOR][/B] Launch "RaphaelKitchen.CMD" from *Kitchen\ folder again
[B][COLOR="Indigo"]-=10=-[/COLOR][/B] chose "cf" for cook and flash a ROM, then "b" for "if you want to use the
new BuildOS+Package..."
[B][COLOR="Indigo"]-=11=-[/COLOR][/B] Ervius Package _tool+BuildOS windows will launch, choose "BuilOS" tab
[B][COLOR="Indigo"]-=12=-[/COLOR][/B] click on "Load ROM", now choose your Kitchen/ Folder where you have
OEM/ROM/SYS folder, then click ok
[B][COLOR="Indigo"]-=13=-[/COLOR][/B] Click on RUN, once it finished loading the ROM. When you see the
word "Done" Close Ervius by clicking on the "X" button
(your DOS will run again, and ask you to press any key to start... Press
the "any key" :p )
[B][COLOR="Indigo"]-=14=-[/COLOR][/B] While it's running, it will open a tables with a bunch of numbers that
you don't understand
(it's checking the memory)... just close it by clicking on the "x" button.
(your Dos will run again, till you get your favorite Flash Window come up...
from here, you're on your own)
Don't forget to HardSPL your device before FLashing your device.
Let us know if this method work for you.
I'm also inviting all the Chefs to join the fun and provide us a Canadian version.
----------Credits----------
This tweak isn't perfect, but took me a while to make Rogers/Fido Display work. However I wouldn't be able to get this far without the helps of Da_G, NATF, trueg and a bunch of other people that I've bugged.
At least give some credits to those who have spent so much time to make this finally happened. Like Da_G said, a donation isn't required, but always appreciated.
Donate
Also, thank nitroblu and y2whisper and other Canadian users who has tested and post their results
There were many bounty offering for this discovery, but none of them keep their words... so disappointed... anyway
----------Found issues----------
1- Does not work while MSVC phone notification is activate.
2- May have issues with QuickGPS (not yet confirmed)
3- It froze my device every-time I run it with spb Wireless (need confirmation)
Can any Mod Change the topic of this one to "[Tut]First step to Canadian ROM, Rogers/Fido Display on your Fuze"
Click edit on the first post, then click advanced edit, you can change the topic from there
Da_G said:
Click edit on the first post, then click advanced edit, you can change the topic from there
Click to expand...
Click to collapse
Thank you... Now, I'll leave the Rom Cooking to the real Chef... I'm going to bed
so happy now
Hi pandaboyy,
Thanks for doing all the hard work. I am in Toronto and use Rogers and ever since I got my Tilt2 earlier this year I have been missing the name display. I just got my Fuze from the states today and installed NATF v3.2 rom. I look forward to having name display working again.
Just one question: any way to put this in a cab or build it into NAFT roms?
Thanks again.
Rob.
talonrob said:
Hi pandaboyy,
Thanks for doing all the hard work. I am in Toronto and use Rogers and ever since I got my Tilt2 earlier this year I have been missing the name display. I just got my Fuze from the states today and installed NATF v3.2 rom. I look forward to having name display working again.
Just one question: any way to put this in a cab or build it into NAFT roms?
Thanks again.
Rob.
Click to expand...
Click to collapse
Hey Rob,
I was about going to TO today to celebrate New Year Eve, but since I didn't sleep I got lazy out and drop the plan (true story). I don't think a cab would do the job. Da_G did explain it, but trust me, I still don't understand why
Da_G said:
Yes, the reason my method does not work is because the rilphone.dll is not signed with a trusted certificate as I stated..
Click to expand...
Click to collapse
And since I'm far from a chef, I really don't know how to cook a cab sorry.
However, try the cooking process that I mentioned in the first post. It's as easy as 1-2-3 and it's fun to start understand a little bit how your device work. Once you open the "de3f3189-9f71-4162-9f26-39393dcc8c94.rgu" file, you'll see that's the whole reg setting of your device. This may helps in the future, because you can actually customize your ROM so that whenever you re-flash it, your reg is already added.
Just try the Kitchen_Raphael (it's small and very easy). It'll take you about 15min to do the whole thing... with NAFT's permission, I'll try to release v3.2 with Rogers display. However, here is a good news for you; NATF is trying to release the first Canadian ROM very soon
Help me to Help you
I was trying change the entry in de3f3189-9f71-4162-9f26-39393dcc8c94.rgu file instead of replacing it to keep all the Tweaks that NATF has done. However, I come up with this error when I tried to build the ROM
"Error building default.hv and user.hv! (see "BuildOS-log.TXT")
I take a look at the file again, and I don't see any important different except for the file properties (ignore the size). Look at the image. The working file is hidden and the hidden option is disable. The non-working file is hidden, but not disable
how do I change make the file hidden and disable the option? I know that DOS can do it, but I just don't know the command.
EDIT---------------------- Solved the problem, but still want to know how to disable Hidden option-----------------------
Ok, I've read several post around the forum, and quite honestly, it didn't help much.
so I did a trial and error... If you want to edit your the de3f3189-9f71-4162-9f26-39393dcc8c94.rgu instead of replacing it, Don't overwrite the file.
1- After you finish to edit save it with another name eg: de3f3189-9f71-4162-9f26-39393dcc8c94_test.rgu.
2- Delete the original file (or move it somewhere else to be sure)
3- Rename your test file to the original name: de3f3189-9f71-4162-9f26-39393dcc8c94.rgu
4- Right click on the file, Properties then make it Hidden
(You may find this funny, but this is my amateur way)
monx said:
that file has system attributes. run this from command prompt to remove all attributes & locked attributes.
attrib -s -h -r -a filename.ext
your rgu file must hv unicode encoding, REGEDIT4 in line 1 & blank space on last line to avoid rgucomp error.
Hope this helps.
Click to expand...
Click to collapse
You mean
attrib +s +h +a filename.ext
then leave 1 empty line on the last line... do I have to add 1 space as well?
Just has to end with a blank line, rather than ending with a registry entry
Da_G said:
Just has to end with a blank line, rather than ending with a registry entry
Click to expand...
Click to collapse
Cool, thanks
Ok, I have successfully change the rgu file. It's one of these Lines, but I don't know which yet and I have no energy today to test 1 by 1 again... so if you can test it for me it would be great
Here are the lines that I've changed to make Call display work
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL] ; for HTCmaskW1
"HTCmaskW1"=dword:1871
"HTCmaskW1BitMask"=dword:FFFFFF
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL] ;for A5/2, A5/3
"En52"=dword:1 ; A5/2
"En53"=dword:1 ; A5/3
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL] ;for remove RX Diversity
"RMRXDiv"=dword:0 ; Enable
[HKEY_LOCAL_MACHINE\Software\OEM\RIL]
"DisH"=dword:2
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"DisableAutoPickupAtSilentMode"=dword:1 ;disable by default
add ---> [HKEY_LOCAL_MACHINE\Software\Microsoft\RIL\APIInfo\69]
"Timeout"=dword:7918 ; 31 sec.
[HKEY_LOCAL_MACHINE\Software\Microsoft\RIL\APIInfo\82]
"Timeout"=dword:1D4C0 ; 120 sec.
[HKEY_LOCAL_MACHINE\Software\Microsoft\RIL\APIInfo\81]
"Timeout"=dword:1D4C0 ; 120 sec.
[HKEY_LOCAL_MACHINE\Comm\Cellular\RIL\RemoteCalltype]
"CalltypeDLL"=" PTTCalltypeCallback.dll" ; DLL containing the callback routine
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]
"0000100c"=dword:800 ;Service Loading (SL) Message Policy
[HKEY_LOCAL_MACHINE\Software\OEM\RIL\OperatorContexts\20801] ;Orange FR
"GPRSContextNumber"=dword:2
"UMTSContextNumber"=dword:2
[HKEY_LOCAL_MACHINE\Software\OEM\RIL\OperatorContexts\20810] ;SFR (Voda FR)
"GPRSContextNumber"=dword:2
"UMTSContextNumber"=dword:2
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"BattSuspendTimeoutBackup"=dword:3C
"BatteryTimeoutBackup"=dword:1E
"BattSuspendTimeoutInCall"=dword:30
"BatteryTimeoutInCall"=dword:30
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"EnableIMSIAttachedIcon"=dword:1
Perhaps someone can pick this up for me since I'm not much of a registry guy.
Here is a weird thing that I found about this Tweak
When someone call, the ID will display and all... However, in Call history, it will only display the caller Name if it's a missed call. If you answer it, then it won't show the name ID in call history, but only the number... I'm testing it with FuzeBerry v6 theme. Can anyone confirm this?
and if you know how to fix this, it would be great
Ok, for this tutorial, I deserved a kiss
History:
you all know how I didn't sleep for 2 days just to find what needed to be done to make it work. Now after my 10hr sleep and a bunch of parties for new years, I finally found a way to do this without cooking anything. I need someone to test it for me thou. I've tested on NATF's and Elite's ROM and it works. If this work, a thank you would do.
The Basic:
The Main idea to make this work is to replace the rilphone.dll file and add some registry into it, like I was explained in the first post. Some people claimed that those files need to be cooked in, well, you don't however, you can't just replace rilphone.dll it just doesn't work that way. But I found a way
So How to do it?
1- Download rilphone+reg.zip file from this post
2- Extract the file and you'll find
+rilphone.dll
+rilphone2.dll
+rilphone.reg
3- Copy rilphone2.dll into your Device in \Windows\ folder
4- Copy rilphone.reg anywhere
5- Importe rilphone.reg to your registry (I used resco registry to do this)
6- Change this registry from your device
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"Dll"="rilphone2.dll"
7- reboot
8- copy rilphone.dll into your device \Windows\ folder
9- Change the registry back to
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"Dll"="rilphone.dll"
10- Soft Reset
11- Delete rilphone2.dll
12- Soft Reset
13- Give me a hug
***Please report which ROM have you tried this method with and if it works or not***
--------Edit---------
Ok, so it doesn't work for every ROM. It worked with Elite RC2, thou... I'll give it more tries tonight. Stay Tune
If you want to try this process, please make backup of rilphone.dll first
And please try to put step 5 at the end.
Instead of trying all this, try the cab on post #26... if it doesn't work, just uninstall it. Backup rilphone.dll first. Worst case, just do a hard reset.
---------------------
--------ROM tested with cab-------
- Elite RC2 -> Work
- Proven 1.08 -> did not work
- Romeo -> did not work
-------- I'm sick of flashing and hard reset, so I'll stop here. If you're already on other ROM. let me know.
Good to see you we're able to get this working.
I didn't modify any part of the RGU file in OEMDrivers, so I'm just gonna drop the new DLL and the RGU/DSM you provided here into my v4.0 kitchen.
NotATreoFan said:
Good to see you we're able to get this working.
I didn't modify any part of the RGU file in OEMDrivers, so I'm just gonna drop the new DLL and the RGU/DSM you provided here into my v4.0 kitchen.
Click to expand...
Click to collapse
Ya, it should work... however, can you check if the RGU/DSM file didn't affect QuickGPS? I didn't make any change there, but just check for sure.
Finally, I can sleep with ease now...
My next wish, somebody make a cab or 2 to make my previous post easier
Only problem with non-cook method will be, if target ROM is not cert patched, or doesn't have certificate loaded from rilphone.dll signature it will refuse to load rilphone.dll due to not being signed with a trusted cert..
hey pandaboy,
tried this on my fuze but didn't work, (using proven rom right now) my wireless radio stops working after. i even tried starting over by deleting your rilphone.dll file and softresetting to get my phone working and did the steps again. no go.
Same, my radio is not working now either. Is there anyway to get my radio back?
just delete the rilphone.dll file from your windows directory and perform a soft reset
y2whisper said:
just delete the rilphone.dll file from your windows directory and perform a soft reset
Click to expand...
Click to collapse
When i try to delete it it says cannot delete the file.