first off let me start off by saying, yes, i'm a noob. i started out by reading all the posts in every thread i could. i have a x10ht that i bought at the local asian mall, not knowing that there were so many problems unlocking it
this is the second failed attempt at flashing a new rom onto my phone. i must say, i am not impressed. it froze the last time, i'm not sure where, and this time at 47%. kinda annoying when u think about it. i took the precautions and followed instructions, but to no avail
can anyone help? i'll give all the details i can...
bl 1.09
radio 1.14
old rom was 1.35
What state is it in now?
if i plug it in to the pc, it goes into bl 1.09
so, i was able to flash the old softbank rom onto it, but now i'm stuck with a japanese device with a sim lock on it(i think). i can't even set up activesync to try to update again. any ideas guys?
I don't have much xp with the ideosyncracies of the Softbank X01ht, but you should be able to build a sspl RUU featuring the os.nb of your choice. I believe you don't want to try flashing the radio ROM area but an os.nb only flash should restore the english version of your choice.
I'd look for confirmation on the above conjecture however, before trying these steps:
download the ruu of your choice and extract the signed nbh file using winrar or equivalent (the exe is an executable rar file)
use nbhextract or nbhdump to extract all the files
use Olipro's RUU builder to create a sspl RUU with only os.nb (use the 06_os.nb extracted from step 2)
flash this onto your device
This procedure should raise a lot of questions for you to research the answers to. The answers are all here I assure you. In researching, you will learn about the techniques of custom flashing for Hermes and whether they can really be used safely on your device.
Flashing the japanese ROM shouldn't have SIM locked you again. However, if it is you can research your free solution on this thread or you can purchase unlock from here.
Also: please explain what you mean by "Can't set up Activesync"
the only problem is right now i can't even access my device... there appears to be some sort of lock on it, something to do with usim and i have no clue what it says. but i can't do anything with it
Its probably saying the SIM is incorrect. You may well be SIMLocked....
You need to get it to the today screen to do sspl flashing. Try resetting with no SIM installed. the first thing you should see after the WM splash is the phone dialer saying "The SIM is missing" in japanese. Hit the cancel button which on my TyTN is the first labeled button above the green button to return to the today screen (you may have to experiment to find the right button).
i do get that, but after a few seconds, it goes to a screen where you can put in a code and there is writing on the left soft button, but you can't select it, i assume until a suitable length code is input, and it has no ok button, so i can't even get out of it... help!!!
and by can't set up activesync i mean that i can only get into the today screen for a very limited time, and activesync doesn't seem to connect fast enough, so i'm kind of stuck.
This happens when there's no SIM installed?
yes, it does. but i may have found out something. i can connect to my hermes through activesync on my work computer... hmmm... let me see here...
wow, that was an experience
so i think i'm good, i'll update you guys as teh day goes on, but i may have fixed this myself, and i feel so releived.
yes, the same usim message was coming up regardless of the way i started it up, but i had about 20 seconds of pda usage before it would come up. i got activesync working via the work laptop on the usim screen, and was able to copy sspl over, i restarted and quickly ran sspl, which got me into des's bootloader. from there, it was just a matter of running the ruu i wanted to run in the first place, WM6 .2, and voila, we seem to be back in business... but i don't ever want to do that again, so i think i'm going to flash that hard sspl... but first to test the radio's and and other features.... wow. last time the flash ****ed up on me, i had to pay this guy $30 to fix it, and tho he did, he never wanted me to know how so i could do it myself next time. screw him!!!!
thanks to everyone and their hard work on the forums here. without you, i'd be styling with a razr rather than hacking this thing apart like it was an xbox or psp....
Related
Hey everyone,
i am so upset and lost; words cannot describe it.
So i installed WM6 black shadow and everything was working except for SMS and MMS. So i am like ok i can live with that for a day till custel' rom will come out. SO i decided to upgrade the radio to 1.43 and boom here is where the problem started, No GSM on boot up. Phone doesn't boot up. I tried install 1.40 over again, still nothing. No i tried upgrade the the rom itself, i tired custel 2.5 and nothing and i tried the new Cingular rom, still same problem. the roms flash all the way. I read the wiki, and saw the mtty.exe thing but that doesn't work for me either. I am really lost and don't know what to do.
Specs
cingular 8525
hardspl v7 cid and sim unlocked.
PLEASE HELP
4.13?? 4.10??
Where did you download these radios from??
or do you mean 1.41 or 1.43??
Yeah thats what i meant, 1.40 and 1.43 sorry. You can see how upset i am.
Thanks Again
Well, if your phone turnes on .. it's not a brick.. lol .. it IS fixable... When you turn the phone on does it go RIGHT to the 3 colored screen?
@dan5.5
You need to read the unbricking thread about this, all the info you need is there.
http://forum.xda-developers.com/showthread.php?t=286755
If you are superCID I don't see how flashing a radio could have messed up your phone.. that's weird.
mrvanx said:
@dan5.5
You need to read the unbricking thread about this, all the info you need is there.
http://forum.xda-developers.com/showthread.php?t=286755
Click to expand...
Click to collapse
I read everything there and nothing seems to be working for me. I woudnt post for nothing. i dont want to be annoying.
OK im going to repost what ive said on 4wm:
We need to check if your Radio BL is functional, firstly leave HardSPL v7 on there and connect to the bootloader via mtty (il assume you know how to do this).
Issue the following commands and tell us the results please:
1) checkimage (this shows the CRC checksums of each component...id expect the radio image to show a timeout....
2) info 2 (This will verify that your CID is intact)
3) info 8 (does a bad block check)
Once youve done this, flash SPL 1.10.oli to the device and once again connect up to mtty.
4) 'rtask a' this will enter the radio bootloader you will see "Enter Radio Bootloader" or something to that effect
from now on when you type the text does NOT appear on the mtty screen.
5) 'rversion' this should return your radio bootloader version...now unfortunatly if you see nothing...you radio BL is dead and sorry your device is royally bricked. If you get something returned back onto the screen (most probably containing the text '0108') then your radio BL is fine.
Click to expand...
Click to collapse
do as instructed in that text, post your results here.
I cant falsh spl 1.10 oli. it gives me the 260 error.
the 260 error is not connected via USB right? .. weird... have you tried taking your battery out for a couple minutes, then booting into BL mode? sounds weird but this worked for me when I didnt flash hardSPL firsl..
hey mrvanx's
I can't downgrade the hardspl to 1.10, anyhelp.
I cant active sync, the phone doesnt boot up.
Is there anyway to aviod having to respond on the phone.
hey,
i can get the phone to boot up into windows and then it freezes within a couple min. what should i do. Still no gsm message and no phone. thanks
Dan
OK, so let's try and get you to a working state - I've bricked mine a couple of times and it can be quite heart-stopping, eh?
The first thing I would do is re-download radio 1.43, just incase your current one is damaged somehow.
Secondly, download Black Shadow - I know it's not the ROM you ultimately want but the aim here is to get you working again and we can move forward from there.
First, boot up into BootLoader mode (hold down the OK button on the left side of the phone and the power button and then press the reset button on the bottom, just in case you didn't know
You should come to the three colour screen and it should be reading IPL-1.04 and SPL-2.10.Olipro. If it isn't, stop here and post what it does say.
If it everything is OK at this point, when you plug your phone into your computer, it should change to USB at the bottom. Just wait for the Found New Hardware prompts to clear on your PC and then flash the black rom - choose the hardspl option in the flash program.
Once that has finished and it is at the "tap screen to set up windows..." bit, put it back into bootloader mode as above and flash the radio.
This should hopefully give you a running phone again as I know this combination works OK as I am currently using it.
Fingers crossed, don't panic, and let us know what the results are
Cheers,
Smiffy.
Nothing is working, can some please help me. Is there anyt way i can restore the spl to the original one so i can send the phone back, i just got it like 2 weeks ago. thanks
Also i have a bad block thats what i think makes the phone freeze after i boot it up.
How can i get around this, thats seems to be the biggest problem.
Hey everyone, let me give you more info.
I can fully flash any rom and and radio,
phone will boot up like 1 out of 10 times and then freezes and thats it.
i have a bad block number 6. I have hard spl v7 installed before the phone got screwed up. I cant downgrader the spl to a lower one to check if radio stack is screwed up. Can someone please help me, if you need to ask me more info feel free.
Hi,
I have done A LOT of reading on the subject, but just want to make sure I am doing everything correctly before i go ahead and flash.
The phone I am flashing is a fresh refurb 8525 with WM5.
I wanted to install the Hard SPL but am not certain if i need to install SSPL first or not. I tried to enter the bootloader screen by pressing power and OK on the side and holding SR...It takes me to a screen that asks me to select KITL Transport and KITL mode, but it seems locked up there.
The one other question i have for now is will the VP ROM automatically upgrade my Radio to the 1.48 version?
I am pretty sure i will be fine once i get the Hard SPL loaded, as there is loads of resources here, but just got hung up on a couple small things. Thanks in advancec
Well done doing your homework.
1. You don't have to hold down the Reset button (the poke-in-the-hole). Just press it with the other buttons held down to get to bootloader screen. However, you do have KITL on your phone, which is added security.
2. No, you do not need to do anything with SSPL to get to HardSPL. SSPL is done by the RUU itself - nothing you need to do seperately.
3. Most newer cooked ROM packages (i.e. last 4 months) don't include a radio. The first post of the thread should tell you. If you want to check, you can unpack the NBH file using "duttys good nbh tool" and see what is in there. If teh download package for VP3G is an exe, you may have to unrar it first to get to the nbh.
Reminders:
- use the latest RUUWrapper (if it is not included in the download package)
- use latest ActiveSync (4.5)
- check out www.mrvanx.org, if you have not already
Thanks for the helpful reply. I actually wasan't sure if i would get yelled at for having NOT read something
I still can't get to that bootloader screen, keeps sending me to the KITL. Do i even need to know which version i have or not?
EDIT: When i just do a regular SR, there are a bunch of numbers that show up...One on the bottom says "D 2.15" Is this my IPL/SPL?
Also, you went over my head a little. Maybe i should also just post in VP's download thread to ask if it has the radio and the latest unwrapper.
I was hesitant to post because everyone is so knowledgable and i am not... trying to learn without asking but sometimes that leaves you less than 100%sure. Thanks again
EDIT: Just re-read his notable features anad it says right there. No Radio, no ipl, no spl.
Dillsnik said:
I still can't get to that bootloader screen, keeps sending me to the KITL.
Click to expand...
Click to collapse
I had issues getting into bootloader too......my issue was just a timing/coordination problem. I finally hit the right timing after about the 10th time.
Even after reading this forum all nite, I am still soooo confused, maybe too much new info in m'head. At any rate, I am trying to UG from WM5 to WM6 and am having a heck of a rough time. Everything goes good until it actually starts the process, at which time I get the 260 Connection Error. After plenty of research on here, I decided to try to "flash" the ROM, to no avail, for nothing happened. I can get into bootloader mode but then nothing else happens (perhaps I'm not waiting long enough? How long should I wait?) and I never see the screen pictured here - http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing - so I just give up and reset. I am currently downloading the HardSPL utility so I can try flashing after the IPL and SPL ugrades. But I do have some questions still --
(1) Does my phone need to be "unlocked" to do this and how can I tell if it is or isn't?
(2) Can I just use the ROM that I downloaded from the HTC site or must I use one found somewhere on this forum?
Any other advice? All will be appreciated. Thanx.
Oh, yeah -- I'm working with a Cingular 8525 Hermes [HERM100 model number] Pocket PC. It's specs are:
ROM version 2.15.502.3
ROM date 04/09/07
Radio version 1.40.30.00
IPL 1.03
SPL 1.11
Have you read this http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeForBeginners ?
Re:
Yes, I have, plus all the links branched from there. After about 3 hours of reading, I felt ready to try flashing, but it didn't work. The HardSPL utility is done downloading, so when I get home I'll try that and hope I finally get a successful upgrade. If not, I'll be back to the forums. Thanx!
What ROM are you upgrading to? The official AT&T ROM? I'd try that first if you're not already.
BDsBabyGirl said:
Even after reading this forum all nite, I am still soooo confused, maybe too much new info in m'head. At any rate, I am trying to UG from WM5 to WM6 and am having a heck of a rough time. Everything goes good until it actually starts the process, at which time I get the 260 Connection Error. After plenty of research on here, I decided to try to "flash" the ROM, to no avail, for nothing happened. I can get into bootloader mode but then nothing else happens (perhaps I'm not waiting long enough? How long should I wait?) and I never see the screen pictured here - http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing - so I just give up and reset. I am currently downloading the HardSPL utility so I can try flashing after the IPL and SPL ugrades. But I do have some questions still --
(1) Does my phone need to be "unlocked" to do this and how can I tell if it is or isn't?
(2) Can I just use the ROM that I downloaded from the HTC site or must I use one found somewhere on this forum?
Any other advice? All will be appreciated. Thanx.
Oh, yeah -- I'm working with a Cingular 8525 Hermes [HERM100 model number] Pocket PC. It's specs are:
ROM version 2.15.502.3
ROM date 04/09/07
Radio version 1.40.30.00
IPL 1.03
SPL 1.11
Click to expand...
Click to collapse
What operating system are you using? If its Vista you MUST use Mr. Vanx's guide to get past the connection problem. The standard Vista HTC driver is wrong when we want to flash rom's in bootloader mode and vista WMDC. Get it here:
MR VANX's VISTA GUIDE
Hard SPL is great after that. Just remember you warranty may be void if you have to go to AT&T for repairs and the see that bootloader. You shouldn't need Hard SPL to flash the standard AT&T rom or VP3G's or other AT&T based ROM's, but better safe than sorry.
Be sure to close EVERYTHING in the taskbar! Don't start any programs, allow any updates to mess around with the computer while its flashing..In fact, I disable my AV program and internet connection totally when I flash ROMS. (My Kaspersky started updating and virus scanning during my 1st flash..sucker froze and freaked me out!)
Once I dealt with unlocking and connection issues, I flashed the standard AT&T ROM, performed a hard reset immediately and then connected via WMDC and synced everything. I tested it for a few hours then decided to flash VP3G's excellent AT&T based ROM v3.62.3..I like to do a hard reset immediately after flashing to burn everything in...I've seen others in this forum do the same.
Another ROM I've found fun is S64's(Starbase64) 3.62 WWE v9 - It's not AT&T based but you can get WPBEAR's Config files to set your Medianet and proxy. There are other At&T settings CABs out there like Dr. Puttinghams. S64 ROM also includes Advanced Config 1.1 to set your keyboard to Cingular mapping.
Good Luck!
re:
My desktop PC is running Windows XP...
After trying the HardSPL method - which upgraded perfectly - I continue to have the above-mentioned problems; 260 Connection Error and inability to move beyond the tri-color screen to the one pictured on the page which instructs how to flash via SD card.
Thanx for the list of ROMs I can try. For the record, I have been using the "official" one I downloaded from the HTC website. *sigh* I guess I'll next look for the tutorial I saw somewhere around here on how to upgrade from the tricolor screen [or something like that, I think it was], as well as your advice.
But I do have another question -- how do I format the SD card? The tutorial I used on flashing with it mentioned formatting so I'll retry it with the card newly formatted (I didn't because it said I could just delete everything off the card OR format it).
I'll let you know how it goes...
Ahhh...Sorry for your troubles...I didn't have luck catching an upgrade from the SD Card method on my 8525 either.
I know it seems a bit much but, is your active sync working correctly? Upgraded to 4.5 and all that? Can you sync and Backup all your data then try uninstal, reboot, re-installing AS?
I wonder what would happen if one tried Mr Vanx's instructions on a Win XP box?
I also had heard somewhere about messing around with when Active sync is started. Also as a last ditch, maybe try this from the HTC Wiki:
http://www.htcwiki.com/thread/667087/ActiveSync+and+Rom+8525?t=anon
Good luck
BDsBabyGirl said:
My desktop PC is running Windows XP...
After trying the HardSPL method - which upgraded perfectly - I continue to have the above-mentioned problems; 260 Connection Error and inability to move beyond the tri-color screen to the one pictured on the page which instructs how to flash via SD card.
Thanx for the list of ROMs I can try. For the record, I have been using the "official" one I downloaded from the HTC website. *sigh* I guess I'll next look for the tutorial I saw somewhere around here on how to upgrade from the tricolor screen [or something like that, I think it was], as well as your advice.
But I do have another question -- how do I format the SD card? The tutorial I used on flashing with it mentioned formatting so I'll retry it with the card newly formatted (I didn't because it said I could just delete everything off the card OR format it).
I'll let you know how it goes...
Click to expand...
Click to collapse
Just another tip... Try a different usb port. I've found that sometimes certain usb ports behave differently during the upgrade procedures. So, far I've upgraded three 8525's on Win XP and only one gave me the problem you've described and connecting the sync cable in another port corrected the problem.
Re: my Post
shihayadreamer said:
...I also had heard somewhere about messing around with when Active sync is started. Also as a last ditch, maybe try this from the HTC Wiki:
http://www.htcwiki.com/thread/667087/ActiveSync+and+Rom+8525?t=anon
Good luck
Click to expand...
Click to collapse
OMG! SHIHAYADREAMER! That was JUST the TICKET! I read it and realized that I'd been doing it right all along, I just didn't realize I was! THIS time, I hooked up my cable at the very beginning and let it go. Before, I'd started waiting to hook it up until the instructions asked if I had because I'd gotten to the tricolored screen (the bootloader?) the 1st time and figured I did something wrong. Thanx to that forum, I returned to what I did the very first time and got victory! *falls down sobbing and weeping with joy* I wasted 25 hours because of fear! OMG! *dances around, singing* I've got WM6! I've got WM6!
I know that being reminded to turn off my firewall and stop all the programs in the taskbar played a big role, as well. But I just give a big "Thanx" (on Thanksgiving! *LOL*) to everyone who answered this board because you all helped me so very very much.
Hi All,
I'm new to the PDA-world and the Hermes. I'm trying to Hard SPL my Hermes, but it fails everytime.
When I run 2.10 - Hard-SPL-V7, it kills activesync and my connection is lost and I get always the message "error 260, Update error".
I have the latest framework edition and tried it on 3 pc's (1 Vista, 2 XP)...
What am I doing wrong?
Hope somebody can help me....
Kind Regards,
Micha
1). dont connect to active sync. open active sync and untick "allow usb connections".
2). put hermes into bootloader and connect to usb.
3). run ruu_wrapper.exe
should update to hard spl....
dont forget to tick "allow usb connections" again or you wnot be able to sync..
error 260 is an open port error.
if you wish to flash new os would advise to use sd card method. its safer than using the computer. just make sure you have greater than 50% battery power. happy flashing
Thnx, will give it a try.
First I have to flash HardSPL before I can flash a new OS, don't I?
yep, sorry, should have said run the ruu_wrapper for hard spl. My bad...
im having the same problem. I also tried the way ultramag recommended but i also received the same ending. After time i try i get the Error 260 Update error. Im running SPL 2.04 and the HTC WM6 rom from the HTC website. Does any one know what the problem is?
ultramag69 said:
2). put hermes into bootloader and connect to usb.
Click to expand...
Click to collapse
NOOOOO, that won't work, you need the SSPL to deploy to the phone, if you're running stock HTC bootloader this won't work at all, otherwise we'd have no need for Hard-SPL
hey olipro, then how would i fix this. Im running the stock rom from the HTC website with no hacks. Im trying to load PDA Corners V9 rom. Any ideas on how to fix? thanks!
Take a peek at the guide i wrote about updating the hardspl. Theres some explanation about why we need to use SSPL and the procedures.
http://www.mrvanx.org/hermes_guide/hardspl
thats the guide i used. it still gives me the error. I even unchecked "allow connections" cause i read somewhere that that would help.
i did this two days ago on my phone, im running windows vista on my home laptop and got any number of errors and problems trying to do it via sync with the phone (even after reading the vista troubleshooter, with the drivers etc)
What i ended up using was the memory card upgrade, dump the file onto the memory card and go into bootloader with the card installed.
worked fine doing that way, maybe less risky as there is no chance of the usb cable coming out.
just make sure you have a good battery charge on the phone.
Help Help Help w bricked 8525
I got into this position trying to upgrade WM5 to WM6 from HTC site.
Process got to 20% and just stayed there.
I reconnected usb cable and got a vendor id error
Then I get the Error [260]: CONNECTION
I have read a lot of posts and have tried the sd method (although i am not 100% clear) and all i get is the screen with four colors, red, green blue and white.
I believe this is the bootloader? I have downloaded RUU_signed.nbh, renamed it to hermimg.nbh, installed on root of my SD card and held OK, soft reset and power button:
My display reads:
HERM100
IPL-1.04
HERM100
SPL-2.03
This is where my journey ends.
All post indicate that the device can be reflashed and have the OS reinstalled. I can't get there from here.
Can anyone please help?
blackdog9692 said:
I have read a lot of posts and have tried the sd method (although i am not 100% clear) and all i get is the screen with four colors, red, green blue and white.
Click to expand...
Click to collapse
How big is your SD card? Flashing only works with cards <2GB. Also, sometimes certain cards just don't work for flashing, and just swapping to a different card fixes the problem.
I assume you searched the wiki, and found the relevant pages on the Hermes (including SD Card Flashing and other things about flashing/upgrading) there?
Still Lost
My SD is 2GB and I have tried many times but i just keep getting the 4 color screen. rt now when i boot from the SD my screen goes white and displays "Loading..." and then returns to bootloader screen. When i attempt to flash the rom via PC to WM5 or WM6 i get the Error 260, i also get a vendor ID error sometimes.
How can i find the key 8525 thread that i am told has the answer to my delima? I keep picking up bits and pieces but am missing some key steps and tips.
blackdog9692 said:
My SD is 2GB and I have tried many times but i just keep getting the 4 color screen. rt now when i boot from the SD my screen goes white and displays "Loading..." and then returns to bootloader screen.
Click to expand...
Click to collapse
That sounds like the SD card is formatted incorrectly. Make sure it's formatted using fat32, nothing else will work.
Still not there from here
Thanks for your help. Before I formatted the SD FAT32, nothing would happen doing the bootloader reset. OK/ON/reset button.
After format and only the hermimg.nbh file renamed as indicated, I then get what looks like the loading process but back to the bootloader screen.
Q1: This is an AT&T 8525, it was perfectly fine before failure from WM5 to WM6 (process froze at 20%), what is the RUU file that I need to put on SD??
Q2: After "Loading ..." I try the WM5 PC upgrade of ROM via USB cable, I get the load process to appear to work but it gets to 1% and the phone reboots and the PC reports error [294]: Invalid vendor ID. If I do this again I will get the Error [260]. Ive repeated the process several times.
Is this the normal course to take or should the "SD Method" (with the WM5 or WM6 RUU.. file) complete the process to a working OS?
Q3: Is my situation hopeless? ATT will take my out of warrantee 8525 and reflash for $129. Reading the threads it seems that like me this can be done by me, this is my desire.
Q4: I still am confused by some basic terms and assumed steps. I dont understand "Hard SPL" or OLI's IPLs/SPLs and when and when to use them.
The newbe guide has been off line. I will look again. Is there a single place to read about "radio PDAs and the 8525 and understand the software build and custom options?
Sy for the long post. But still want to fix if possible or I will be force to mail in for ATT repair.
Thank you all.
blackdog9692 said:
Q4: I still am confused by some basic terms and assumed steps. I dont understand "Hard SPL" or OLI's IPLs/SPLs and when and when to use them.
Click to expand...
Click to collapse
Oh boy, you haven't installed HardSPL? You are walking a bit of a line there mate...
HardSPL is a custom boot loader that makes bricking your phone when flashing much harder to do, and helps large amounts in the recovery process if you phone does brick.
Does the phone boot at this point? If so, do not try flashing the phone again. Go get a copy of HardSPL and install it, then try flashing from the SD.
I still wonder why people didn't read before bricking...
Anyway, you should start reading now and wiki is your friend. Your SPL is 2.03, so look at the bottom of the page (there is only one solution till now, so good luck with that):
Code:
1. Boot OS using KITL+PB
2. Do no disconnect your HERMES till the end of the step 6
3. Download SSPL on HERMES by wifi from ie explorer
4. Launch SSPL then flash Hard-SPL from your computer
5. Put your hermes in bootloader mode
6. Flash any radio in NBH format from your computer
Still researching and working this bricked 8525
Thanks for coming to my aide. I believe that I have Hard SPL'd my device. I downloaded Olipro's Hard SPL v7. extracted the RUU_ file and renamed to hermimg.nbh.
I then put it on an SD card and held the keys and reset. The device displayed a white screen and "Loading..." appeared. Afterward the 8525 returned to the stipped boat loader screen and that is where I am now.
Some of the help i receive and read on wiki threads has me confused with what to do next and how "exactly" to do it.
It does seem that I am not alone and people have fixed their phones and the process to do this is on the forum. I'm just still missing something.
Help me further if u can.
Thank you.
blackdog9692 said:
Thanks for coming to my aide. I believe that I have Hard SPL'd my device. I downloaded Olipro's Hard SPL v7. extracted the RUU_ file and renamed to hermimg.nbh.
Click to expand...
Click to collapse
FYI: bad form to PM someone and post the same thing here. Keep it in the thread so others can be helped as well.
As I replied in the PM, if I'm understanding your post correctly, the phone boots to the tri-colour screen?
What text is showing on the screen? This will tell if HardSPL is on the phone or not.
jdc said:
What text is showing on the screen? This will tell if HardSPL is on the phone or not.
Click to expand...
Click to collapse
We already know that the phone is without HardSPL, according:
My display reads:
HERM100
IPL-1.04
HERM100
SPL-2.03
This is where my journey ends.
Click to expand...
Click to collapse
There is small chance (read my previous post) to unbrick device with SPL2.03 so better try to get this back from where you take it.
And please, change topic, because this brick isn't HardSPL fault at all.
Edit: oh dear, it's even not your topic ...good game, I'm off
Is there anyway that is 100% safe to upgrade or is there always some amount of risk that a unit will end up a brick ?
I've read so much here and on other forums my head spins lol. I was like all set to just do it and then I got the phone lol, now I'm getting cold feet because I read so many people have bricked their phone.
Also can the SPL be done by SD card or does it need to be done with a computer ? I know some will say do a search, I have and man there are so many choices is there just a page or link with a simple idiots guide ?
Its better to do all the upgrading through a PC. Its more safer than SD Card upgrade.
Simple way
Do the HardSPL first then do anything you want. Try to look for Mr.Vanx guides
I agree with beastfellow, install hardspl first then you can flash any hermes rom you like. I have flashed my heremes over 50 times,i even flashed it 12 times in a week as long as the roms you have have no radio or spl in them then they should be fine to flash. Just make sure they hermes roms you are flashing.
hardspl can be downloaded from here http://pof.eslack.org/hermes-unlocker/
guide to how to do it is located here
http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=16&Itemid=26
other guides and there links can be found here
http://forum.xda-developers.com/showthread.php?t=299462
anyway my advice is to go for it. I have only ever bricked one device and that was a wallaby back in the day.
good luck and make sure you read EVERYTHING ,twice if you have to
Dalork,
I felt exactly the same way as you a couple of years back. What I did was to read every scrap of info I could find, constantly assessing the risk, while looking for a stable rom.
Key criteria for my rom search was what other people were saying about that rom (good and bad) and the developers willingness to resolve issues. In the first instance this led me to Schaps and his brilliant roms. For my rom history see my signature.
Read the following threads very carefully, then read the threads on one rom from Schaps and, say, a rom from Kin0ken. Look at the 6.0 roms, NOT the 6.1 versions...
http://www.mrvanx.org/thg/
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes.
Also use these search tools:
wiki - http://www.google.com/advanced_search?q= +site:http://wiki.xda-developers.com&hl=en&lr=&as_qdr=all
forum - http://www.google.com/advanced_search?q=+site:http://forum.xda-developers.com&hl=en&lr=&as_qdr=all
entire xda site -
http://www.google.com/search?q=site:xda-developers.com
Once you are fully genned up then prepare your kit carefully, e.g. make sure your phone batttery is fully charged, then upgrade your rom as you logically and carefully work your way step by step through Mr Vanx guides.
First time I upgraded I had the Mr Vanxguide open on my desktop PC whilst I ran the rom upgrade off my laptop. Using the laptop meant that in the unlikely event of a power cut (does happen where I live) I wouldn't instantly end up with a bricked phone.
Good luck and PM me if you need help/any further info.
Cheers
WB
Thanks for the help folks, I'm just worried I'll brick it as I have a friend who tried this and his is a nice paper-weight now.
I must be getting confused as I thought doing the flashing direct frm the SD card was the safest ?
Anyways, I'm not certain at this point which is the best or safest ROM to go with. I was going to do the Hard-SPL-V7 (2.10 Olipro) and was think of the Schaps_WM6Pro_Hermes_4.31_WWE_Full.
ATM the unit has ROM 1.30.707.4 8/22/06 and Radio 1.20.31.10
I don't think it's ever been flashed as yet as the bootloader is IPL-1.01-SPL-1.06
ask your mate if i can have his paper weight i have a nice rock to swap for it
scousemartin, lol I had already asked him that before I bought my dopod as I was hoping to come here and find out if it could be fixed.
Another point, after upgrading the phone to say WM6 or whatever can you still recover/reload the original factory WM5 system/set-up ?
I guess I'm in-fact quite happy with how the phone is already I just really want to be able to use a 8GB Micro SDHC card so I can load more programs and music. I don't know if any of the radio ROM's will improve my signal as such but battery life seems to be ok already. Used the phone quite a bit today, started off with 80% battery and finished off tonight with still having 70%.
Then why not search for the wm5/6 sdhc fix instead of potentially bricking your phone. Try this - http://forum.xda-developers.com/showthread.php?t=344338
Also, I still reckon, and I believe I'm not alone, that flashing via the sd card is safest....
Direct quote from Wam7's posts -
Flashing your ROM without HARDSPL is like going to a South African brothel without any condoms...
and not using a MicroSD Card is like walking into a prison, dropping your pants and yelling "come and get it boys!"
I rest my case...
ultramag69 said:
Then why not search for the wm5/6 sdhc fix instead of potentially bricking your phone. Try this - http://forum.xda-developers.com/showthread.php?t=344338
Also, I still reckon, and I believe I'm not alone, that flashing via the sd card is safest....
Direct quote from Wam7's posts -
Flashing your ROM without HARDSPL is like going to a South African brothel without any condoms...
and not using a MicroSD Card is like walking into a prison, dropping your pants and yelling "come and get it boys!"
I rest my case...
Click to expand...
Click to collapse
Thanks heaps for that, and I agree I did think flashing from a SD card would be safer as there is no risk in USB/sync problems, no cable to bump...etc..etc... But then I'm a total newbie, what I think doesn't always make sense lol.
If I just do the Hard-SPL-V7 and then something like Schaps_WM6Pro_Hermes_4.31_WWE_Full and don't do the radio ROm is there really much chance of bricking the Dopod ?
While I say I'm not bothered with upgrading the OS and everything else, it's mostly because I'm **** scraed of bricking it lol. I guess it would be silly to say I wouldn't like the better features of a decent upgrade, I just have to get my head around it somehow. But I WILL need more space as I really like to put lots of music on it and some games/apps. Hence the SDHC, I'd like 4GB but would love 8GB as I doubt I'd ever run out of room then.
As it is with my current phone I have 3 x 1GB cards which I just swap around and I hate having to do that and I'm always losing/misplacing the damn things.
If you are SERIOUSLY thinking of upgrading, Hard SPL your phone. You can find the thread "Hard SPL or how not to brick your Hermes" in the upgrading section. Its best to do this as it is the safest we thing you can do. It won't prevent a brick but it makes it a lot more fixable. I have never bricked a phone that I couldn't fix (yet) with Hard SPL on it.
Its fairly difficult, I find bricking the hermes when using the sd card method, as long as you make sure you have Hard SPL, Unlock your Hermes(if needed, did this as wasn't sure) and make sure your battery is charged.
Unlock before putting Hard SPL on though as it downgrades the SPL to 1.10 olipro.
Also use Hard SPL ver.7 (should say SPL 2.10 olipro after upgrade) as ver 9 is the developers SPL (says SPL 2.60) and throws up error messages (if done from the pc) after flash.
As for the rom, no-one can say what is best... What is suitable for me may not be for you. If you ask this questiopn on a thread you'll be inundated with "This rom is best..." remarks. Search and you will see.
Hope this shines some light on the subject (forgive me if this seems scattered, too much caffeine and not enough sleep), anyway,
Cheers....
Thanks for the info and it does help/shed light on it. I have read heaps of info about most everything here, maybe more than I should have even to sart off with lol. I would normally not have been so concerned except that I have a friend close by who tried this exact way of flashing and still somehow bricked phone. Though he did say with folks help here he did get the unit working again but the radio never worked again I think he said.
I already downloaded a copy of Hard-SPL-V7 and Schaps_WM6Pro_Hermes_4.31_WWE_Full.
Not certain if this is the right one for me or not but seems alot of people like it and find it stable. I also grabbed this HER_DopodAsia_AUS_1.30.707.4_1.20.31.10_WWE_Ship though I'm not certain if it's any good or not. I haven't grabbed the unlocking file, not sure I need it or not. With flashing the Hard-SPL-V7 by sd card am I right in what I have read that all I need to do is rename the nbh. file and not the RUUWrapper_exe.
I am finding it difficult to get the Dopod to use 3G for web browsing/email though. But someone told me that the original set-up/ROM wasn't much good for the Optus/Virgin 3G network.
Yes you do only have to copy and rename the .nbh file. Don't forget to run the sspl.exe file from the phone however if you upgrade Hard SPL from the sd card. I ran the unlock tool as a precaution. I DID use the pc for this. I also used the pc to install Hard SPL. Hard SPL takes about 2 secs to install so no real trouble there but the unlocker will change your radio rom. I'd probably install the official Telstra rom to get your tradio back to 154.30.10 after unlocking (it changes to 150.00.00). Also, if you need to search for CircAU's roms as they are made for us Aussies and have a little tool that allows automatic setup of MMS/SMS. You just pick which carrier you have and press start.
You might be able to find a cab file for it on the forum. Do a search for"CWW Enterprises Aus Operator Con.cab". This can then be loaded into ANY rom and used to fix your setup for MMS/SMS. Make sure you also run the ARCSoft MMSComposer cab file first...
Cheers...
ultramag69 said:
Yes you do only have to copy and rename the .nbh file. Don't forget to run the sspl.exe file from the phone however if you upgrade Hard SPL from the sd card. I ran the unlock tool as a precaution. I DID use the pc for this. I also used the pc to install Hard SPL. Hard SPL takes about 2 secs to install so no real trouble there but the unlocker will change your radio rom. I'd probably install the official Telstra rom to get your tradio back to 154.30.10 after unlocking (it changes to 150.00.00). Also, if you need to search for CircAU's roms as they are made for us Aussies and have a little tool that allows automatic setup of MMS/SMS. You just pick which carrier you have and press start.
You might be able to find a cab file for it on the forum. Do a search for"CWW Enterprises Aus Operator Con.cab". This can then be loaded into ANY rom and used to fix your setup for MMS/SMS. Make sure you also run the ARCSoft MMSComposer cab file first...
Cheers...
Click to expand...
Click to collapse
You got me really confused now lol, I thought I only needed to run the Hard SPL and then whatever ROM I liked (was looking at ones without radio ROM's). Also do you think it would be wsie to flash it with a radio stack for Telstra when I'm using Virgin as it seems Virgin is using the Optus network.
Sorry if I sound daft just the more I read the more confused I'm getting. Also it seems that everyone does have a different opinion on how and what is best. Just want to work out what is best for me before I have a go at bricking my phone lol. I've not found setting up SMS/MMS hard at all. Seeed pretty easy, having most my trouble setting it up for Virgin's 3G access for web browsing. Just can't seem to get it to work, got it set-up for wifi at home no drama but don't really need web access from the phone when I'm at home and have several computers.
Sorry, Information overload...
1. CWW Enterprises Aus Operator Con.cab - this cab file does a quick loading of sms/mms setting on the phone. You can use ANY rom and then setup your messaging with this. First however, install 2.
2. ARCSoft MMSComposer cab - This allows the use of mms on your phone properly. Some roms don't seem to set up your mms properly. If you have this installed then run 1. it will fix it all up.
I believe it should fix up ALL settings (including the 3g ones) as when you flash a rom, no native settings are kept and I've never had trouble using 3g after installing 1. and 2. then running 1. (will be in programs). It will soft reset your phone after setting it up.
Confused...
Really, just find the rom you want, check in settings as some have an auto network wizard to set this up. I just like CWW Enterprises Aus Operator Con.cab as it was made by an Aussie to use here. Its good when you don't have the network setup wizard (lite roms generally don't come with the frills)
Hope this clears it up....(preferably like glass and not like mud)
Cheers...
I am intrested in buying a Hermes, most likely the unbranded HTC tytn that I believe comes all unlocked.
For that one the procedure is the same still, right?
Hard spl install and choose rome you like
I have seen eithe Schaps 6 or the newer 6.1 with diamond stuff in it
So would I have the same procedure. To find the hard spl (not sure which version to install) and then find the rom w/out a radio?
es_bih, yes. Its the same procedure. Instyall Hard SPL ver 7(ver 9 is the developer one. It tends to throw up an error after upgrading via pc, no problem though).
As for the rom, make sure its a hermes rom. Any you find on this forum are for the Hermes BUT if you go to the other forums (herald, kaiser, etc....) the roms will brick your device as it isn't compatible with your device. Cooked roms are good but until you get to know the vagaries of wm6.1 I'd suggest to stick with wm6. Its more stable than wm6.1. Play with that and then when you are confident enough to try, then go for wm6.1.
Most if not all cooked roms come without a radio rom.
Cheers...
Tried doing the Hard-SPL-V7 on Vista x64 computer and get error 260 problems.
Tried on a XP laptop and got a different option. The first screen that comes up after running the RUUWrapper.exe not only give me the choice of "Force SSPL" but also allows me to tick "Is this Hard SPL ? "
In the guides I've been reading it says you should only get the "Force SSPL". So my question is seeing as I have the option of ticking "Is this Hard SPL?" should I ?
Installing Hard SPL? Tick SSPL. After that you can pick either.
Hmmm, can't seem to get it to do it. Sounds so simple I must be missing something somewhere. No matter what I try I stillget the ERROR 260 (update error)